United States Government Publishing Office
publisher
pbl
distributor
dst
United States
National Archives and Records Administration
Office of the Federal Register
author
aut
Government Organization
text
government publication
eng
FR
Regulatory Information
2018_register
executive
2018-10-20
article
Special Conditions: The Boeing Company (Boeing), Model 777 Series Airplanes; Dynamic Test Requirements for Single Occupant Oblique Seats, With or Without Airbag Devices or 3-Point Restraints
Rules and Regulations
D09002ee1bdb8518c
D09002ee1bdb8524e
United States
Department of Transportation
originator
org
United States Government Agency or Subagency
United States
Federal Aviation Administration
originator
org
United States Government Agency or Subagency
These amended special conditions are issued for the Boeing Model 777 series airplanes. These special conditions are for oblique (side-facing) seats, installed in Boeing Model 777 series airplanes, at an angle of 18 to 45 degrees to the airplane centerline and which may include a 3-point or airbag restraint system, or both, for occupant restraint and injury protection. This amendment adds a note and one special condition to the Special Conditions section. This airplane will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. These design features are oblique (side-facing) single-occupant passenger seats equipped with or without airbag devices or 3-point restraints. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
83 FR 53163
https://www.govinfo.gov/app/details/FR-2018-10-22/2018-22933
2018-22933
fr22oc18-2
4910-13-P
Docket No. FAA-2016-4136
Special Conditions No. 25-621B-SC
https://www.govinfo.gov/app/details/FR-2018-10-22/2018-22933
https://www.govinfo.gov/content/pkg/FR-2018-10-22/html/2018-22933.htm
https://www.govinfo.gov/content/pkg/FR-2018-10-22/pdf/2018-22933.pdf
Aircraft
Aviation Safety
Reporting and Recordkeeping Requirements
4 p.
53163
53166
83 FR 53163
Code of Federal Regulations
Title 14 Part 25
14 CFR Part 25
Special Conditions: The Boeing Company (Boeing), Model 777 Series Airplanes; Dynamic Test Requirements for Single Occupant Oblique Seats, With or Without Airbag Devices or 3-Point Restraints; Federal Register Vol. 83, Issue
RULE
2018-22933
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
2018-10-22
2018-12-06
Docket No. FAA-2016-4136
Special Conditions No. 25-621B-SC
4910-13-P
2018-22933
Amended final special conditions; request for comments.
These amended special conditions are issued for the Boeing Model 777 series airplanes. These special conditions are for oblique (side-facing) seats, installed in Boeing Model 777 series airplanes, at an angle of 18 to 45 degrees to the airplane centerline and which may include a 3-point or airbag restraint system, or both, for occupant restraint and injury protection. This amendment adds a note and one special condition to the Special Conditions section. This airplane will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. These design features are oblique (side-facing) single-occupant passenger seats equipped with or without airbag devices or 3-point restraints. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
This action is effective on The Boeing Company on October 22, 2018. Send comments on or before December 6, 2018.
John Shelden, Airframe and Cabin Safety Section, AIR-675, Transport Standards Branch, Policy and Innovation Division, Aircraft Certification Service, Federal Aviation Administration, 2200 South 216th Street, Des Moines, Washington 98198; telephone and fax 206-231-3214; email John.Shelden@faa.gov.
Aircraft
Aviation Safety
Reporting and Recordkeeping Requirements
Special Conditions:
The Boeing Company (Boeing), Model 777 Series Airplanes; Dynamic Test Requirements for Single Occupant Oblique Seats, With or Without Airbag Devices or 3-point Restraints
,
John.Shelden@faa.gov
http://www.regulations.gov/
Federal Register
Vol. 83, no. 204
Office of the Federal Register, National Archives and Records Administration
2018-10-22
continuing
daily
deposited
born digital
213 p.
Table of Contents:
AE 2.7:
GS 4.107:
AE 2.106:
KF70.A2
https://www.govinfo.gov/app/details/FR-2018-10-22
P0b002ee19d6d8038
0097-6326
0042-1219
0364-1406
769-004-00000-9
000582072
f:fr22oc18
https://www.govinfo.gov/app/details/FR-2018-10-22
https://www.govinfo.gov/content/pkg/FR-2018-10-22/pdf/FR-2018-10-22.pdf
https://www.govinfo.gov/content/pkg/FR-2018-10-22/xml/FR-2018-10-22.xml
fdlp
53159
53361
DGPO
2018-10-20
2023-04-28
FR-2018-10-22
machine generated
eng
FR
FR-2018-10-22
83
204