United States Government Publishing Office publisher pbl distributor dst United States National Archives and Records Administration Office of the Federal Register author aut Government Organization text government publication eng FR Regulatory Information 2016_register executive 2016-03-15 article Rules and Regulations D09002ee1c7f66e20 D09002ee1c7f66f12 United States Department of Transportation originator org United States Government Agency or Subagency United States Federal Aviation Administration originator org United States Government Agency or Subagency These special conditions are issued for the Boeing Model 777- 300ER airplane. This airplane, as modified by JAMCO America, Inc. (JAMCO), will have a novel or unusual design feature associated with side-facing, oblique seats equipped with inflatable restraints. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for occupants of seats installed at an angle of greater than 18 degrees, but substantially less than 90 degrees, to the centerline of the airplane, nor for airbag devices. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards. 81 FR 13969 https://www.govinfo.gov/app/details/FR-2016-03-16/2016-05995 2016-05995 fr16mr16-3 4910-13-P Docket No. FAA-2015-8298 Special Conditions No. 25-611-SC https://www.govinfo.gov/app/details/FR-2016-03-16/2016-05995 https://www.govinfo.gov/content/pkg/FR-2016-03-16/html/2016-05995.htm https://www.govinfo.gov/content/pkg/FR-2016-03-16/pdf/2016-05995.pdf Aircraft Aviation Safety Reporting and Recordkeeping Requirements 3 p. 13969 13971 81 FR 13969 Title 14 Part 25 14 CFR Part 25 Special Conditions: JAMCO America, Inc., Boeing Model 777-300ER, Dynamic Test Requirements for Single-Occupant Oblique (Side-Facing) Seats With Inflatable Restraints; Federal Register Vol. 81, Issue RULE 2016-05995 DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 2016-03-16 2016-05-02 Docket No. FAA-2015-8298 Special Conditions No. 25-611-SC 4910-13-P 2016-05995 Final special condition; request for comments.

These special conditions are issued for the Boeing Model 777- 300ER airplane. This airplane, as modified by JAMCO America, Inc. (JAMCO), will have a novel or unusual design feature associated with side-facing, oblique seats equipped with inflatable restraints. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for occupants of seats installed at an angle of greater than 18 degrees, but substantially less than 90 degrees, to the centerline of the airplane, nor for airbag devices. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action is effective on March 16, 2016. We must receive your comments by May 2, 2016. John Shelden, Airframe and Cabin Safety, ANM-115, Transport Airplane Directorate, Aircraft Certification Service, 1601 Lind Avenue SW., Renton, Washington 98057-3356; telephone 425-227-2785; facsimile 425-227-1320. Aircraft Aviation Safety Reporting and Recordkeeping Requirements Special Conditions: JAMCO America, Inc., Boeing Model 777300ER, Dynamic Test Requirements for Single-Occupant Oblique (Side-Facing) Seats with Inflatable Restraints , http://DocketsInfo.dot.gov/ http://www.regulations.gov/ Vol. 81, no. 51 Office of the Federal Register, National Archives and Records Administration 2016-03-16 continuing daily deposited born digital 410 p. Table of Contents: AE 2.7: GS 4.107: AE 2.106: KF70.A2 https://www.govinfo.gov/app/details/FR-2016-03-16 P0b002ee18ef09718 0097-6326 0042-1219 0364-1406 769-004-00000-9 000582072 f:fr16mr16 https://www.govinfo.gov/app/details/FR-2016-03-16 https://www.govinfo.gov/content/pkg/FR-2016-03-16/pdf/FR-2016-03-16.pdf https://www.govinfo.gov/content/pkg/FR-2016-03-16/xml/FR-2016-03-16.xml fdlp 13967 14367 DGPO 2016-03-15 2024-06-02 FR-2016-03-16 machine generated eng FR FR-2016-03-16 81 51