United States Government Publishing Office
publisher
pbl
distributor
dst
United States
National Archives and Records Administration
Office of the Federal Register
author
aut
Government Organization
text
government publication
eng
FR
Regulatory Information
2006_register
executive
2010-09-22
article
Correction to Safety Advisory Concerning the Manufacture, Marking, and Sale of Untested Compressed Gas Cylinders
Notices
D09002ee1bde1c70d
D09002ee1bde1c79a
United States
Department of Transportation
originator
org
United States Government Agency or Subagency
United States
Pipeline and Hazardous Materials Safety Administration
originator
org
United States Government Agency or Subagency
On May 1, 2006, PHMSA published a safety advisory notice advising the public that certain high pressure DOT exemption cylinders were not tested in accordance with applicable regulatory requirements. In the safety advisory notice, the serial numbers for the Goodrich cylinders ``Model No. T123-1 GOODR'' were listed incorrectly. This safety advisory notice corrects the May 1, 2006 safety advisory notice to provide the correct serial numbers for the affected cylinders. PHMSA published the safety advisory after learning of the manufacture, marking, and sale of certain high pressure DOT exemption cylinders that were not tested in accordance with applicable regulatory requirements. These cylinders were manufactured and/or distributed by Luxfer, Inc. (Luxfer), Riverside, CA. Luxfer and its independent inspection agency, Arrowhead Industrial Services, Inc. (Arrowhead), reported to PHMSA that 6,325 high pressure cylinders manufactured to the DOT CFFC and FRP-1 standards as authorized in DOT-E 10915, DOT-E 9634, and DOT-E 9894, had been shipped from Luxfer without undergoing the required autofrettage and hydrostatic tests. In a joint effort, Luxfer and Arrowhead have retrieved 2,581 of the untested cylinders. The model numbers and serial numbers of the remaining 3,859 cylinders are listed in this notice. Only cylinders with the listed serial numbers listed are affected. A person with a listed cylinder should discontinue use of the cylinder and return it to Arrowhead at the address below so the autofrettage and hydrostatic test can be completed before its next use. Shippers and compressed gas filling facilities are advised that these cylinders do not meet the requirements of the Hazardous Materials Regulations and may not be offered for transportation or transported until the required testing is completed.
71 FR 27307
https://www.govinfo.gov/app/details/FR-2006-05-10/E6-7047
E6-7047
fr10my06-119
4910-60-P
Docket No. PHMSA-06-24304 (Notice No. 06-2)
https://www.govinfo.gov/app/details/FR-2006-05-10/E6-7047
https://www.govinfo.gov/content/pkg/FR-2006-05-10/html/E6-7047.htm
https://www.govinfo.gov/content/pkg/FR-2006-05-10/pdf/E6-7047.pdf
6 p.
27307
27312
71 FR 27307
Correction to Safety Advisory Concerning the Manufacture, Marking, and Sale of Untested Compressed Gas Cylinders; Federal Register Vol. 71, Issue
NOTICE
E6-7047
DEPARTMENT OF TRANSPORTATION
Pipeline and Hazardous Materials Safety Administration
Docket No. PHMSA-06-24304 (Notice No. 06-2)
4910-60-P
E6-7047
Correction of a safety advisory notice.
On May 1, 2006, PHMSA published a safety advisory notice advising the public that certain high pressure DOT exemption cylinders were not tested in accordance with applicable regulatory requirements. In the safety advisory notice, the serial numbers for the Goodrich cylinders ``Model No. T123-1 GOODR'' were listed incorrectly. This safety advisory notice corrects the May 1, 2006 safety advisory notice to provide the correct serial numbers for the affected cylinders. PHMSA published the safety advisory after learning of the manufacture, marking, and sale of certain high pressure DOT exemption cylinders that were not tested in accordance with applicable regulatory requirements. These cylinders were manufactured and/or distributed by Luxfer, Inc. (Luxfer), Riverside, CA. Luxfer and its independent inspection agency, Arrowhead Industrial Services, Inc. (Arrowhead), reported to PHMSA that 6,325 high pressure cylinders manufactured to the DOT CFFC and FRP-1 standards as authorized in DOT-E 10915, DOT-E 9634, and DOT-E 9894, had been shipped from Luxfer without undergoing the required autofrettage and hydrostatic tests. In a joint effort, Luxfer and Arrowhead have retrieved 2,581 of the untested cylinders. The model numbers and serial numbers of the remaining 3,859 cylinders are listed in this notice. Only cylinders with the listed serial numbers listed are affected. A person with a listed cylinder should discontinue use of the cylinder and return it to Arrowhead at the address below so the autofrettage and hydrostatic test can be completed before its next use. Shippers and compressed gas filling facilities are advised that these cylinders do not meet the requirements of the Hazardous Materials Regulations and may not be offered for transportation or transported until the required testing is completed.
Wayne E. Chaney, Cylinder Program Manager, Office of Hazardous Materials Enforcement, (202) 366-4700, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, 400 Seventh Street, SW., Room 7104, Washington, DC 20590-0001.
Hazardous materials:
Safety advisories
Untested compressed gas cylinders; manufacture, marking, and sale; correction,
Federal Register
Vol. 71, no. 90
Office of the Federal Register, National Archives and Records Administration
2006-05-10
continuing
daily
deposited
born digital
206 p.
Table of Contents:
AE 2.7:
GS 4.107:
AE 2.106:
KF70.A2
https://www.govinfo.gov/app/details/FR-2006-05-10
P0b002ee180949a1e
0097-6326
0042-1219
0364-1406
769-004-00000-9
000582072
f:fr10my06
https://www.govinfo.gov/app/details/FR-2006-05-10
https://www.govinfo.gov/content/pkg/FR-2006-05-10/pdf/FR-2006-05-10.pdf
https://www.govinfo.gov/content/pkg/FR-2006-05-10/xml/FR-2006-05-10.xml
fdlp
27185
27381
DGPO
2010-09-22
2023-05-03
FR-2006-05-10
machine generated
eng
FR
FR-2006-05-10
71
90