United States Government Publishing Office publisher pbl distributor dst United States National Archives and Records Administration Office of the Federal Register author aut Government Organization text government publication eng FR Regulatory Information 2003_register executive 2010-09-23 article Part II Rules and Regulations D09002ee1c817c7e8 D09002ee1c817c89a United States Environmental Protection Agency originator org United States Government Agency or Subagency This action promulgates national emission standards for hazardous air pollutants (NESHAP) for wood building products surface coating operations. The final standards establish emission limitations, operating limits, and work practice requirements for all major sources that apply a surface coating to a wood building product to reduce certain organics listed as hazardous air pollutants (HAP) in section 112 of the Clean Air Act (CAA). These standards implement section 112(d) of the CAA by requiring all major sources to meet the HAP emission standards reflecting the application of the maximum achievable control technology (MACT). Wood building products surface coating operations emit several HAP, including xylenes, toluene, ethyl benzene, ethylene glycol monobutyl ether (EGBE), other glycol ethers, methyl ethyl ketone (MEK), methyl isobutyl ketone (MIBK), methanol, styrene, and formaldehyde. We do not have the type of current detailed data on each of the facilities covered by the final rule and the people living around the facilities that would be necessary to conduct an analysis to determine the actual population exposures to the HAP emitted from these facilities and potential for resultant health effects. Therefore, we do not know the extent to which the adverse health effects described above occur in the populations surrounding these facilities. However, to the extent the adverse effects do occur, the final rule will reduce emissions and subsequent exposures. The final rule will reduce HAP emissions by approximately 4,400 megagrams per year (Mg/yr) (4,900 tons per year (tpy)) or by 63 percent from baseline. 68 FR 31746 https://www.govinfo.gov/app/details/FR-2003-05-28/03-5740 03-5740 fr28my03-16 RIN 2060-AH02 6560-50-U OAR-2003-0002-FRL-7462-2 https://www.govinfo.gov/app/details/FR-2003-05-28/03-5740 https://www.govinfo.gov/content/pkg/FR-2003-05-28/html/03-5740.htm https://www.govinfo.gov/content/pkg/FR-2003-05-28/pdf/03-5740.pdf Environmental Protection Administrative Practice and Procedure Air Pollution Control Hazardous Substances Incorporation by Reference Intergovernmental Relations Reporting and Recordkeeping Requirements 43 p. 31746 31788 68 FR 31746 Title 40 Part 63 40 CFR Part 63 RIN 2060-AH02 National Emission Standards for Hazardous Air Pollutants: Surface Coating of Wood Building Products; Federal Register Vol. 68, Issue RULE 03-5740 II ENVIRONMENTAL PROTECTION AGENCY OAR-2003-0002-FRL-7462-2 6560-50-U 03-5740 Final rule.

This action promulgates national emission standards for hazardous air pollutants (NESHAP) for wood building products surface coating operations. The final standards establish emission limitations, operating limits, and work practice requirements for all major sources that apply a surface coating to a wood building product to reduce certain organics listed as hazardous air pollutants (HAP) in section 112 of the Clean Air Act (CAA). These standards implement section 112(d) of the CAA by requiring all major sources to meet the HAP emission standards reflecting the application of the maximum achievable control technology (MACT). Wood building products surface coating operations emit several HAP, including xylenes, toluene, ethyl benzene, ethylene glycol monobutyl ether (EGBE), other glycol ethers, methyl ethyl ketone (MEK), methyl isobutyl ketone (MIBK), methanol, styrene, and formaldehyde. We do not have the type of current detailed data on each of the facilities covered by the final rule and the people living around the facilities that would be necessary to conduct an analysis to determine the actual population exposures to the HAP emitted from these facilities and potential for resultant health effects. Therefore, we do not know the extent to which the adverse health effects described above occur in the populations surrounding these facilities. However, to the extent the adverse effects do occur, the final rule will reduce emissions and subsequent exposures. The final rule will reduce HAP emissions by approximately 4,400 megagrams per year (Mg/yr) (4,900 tons per year (tpy)) or by 63 percent from baseline.

May 28, 2003. The incorporation by reference of certain publications listed in the final rule is approved by the Director of the Federal Register as of May 28, 2003. Mr. Lynn Dail, Coatings and Consumer Products Group, Emission Standards Division (C539-03), U.S. EPA, Research Triangle Park, NC 27711; telephone number (919) 541-2363; Environmental Protection Administrative Practice and Procedure Air Pollution Control Hazardous Substances Incorporation by Reference Intergovernmental Relations Reporting and Recordkeeping Requirements Air pollutants, hazardous; national emission standards: Brick and structural clay products manufacturing and clay ceramics manufacturing facilities Wood building products surface coating operations, auby.susan@epa.gov dail.lynn@epa.gov http://www.epa.gov/edocket/ http://www.epa.gov/icr www.epa.gov/ttn/oarpg Vol. 68, no. 102 Office of the Federal Register, National Archives and Records Administration 2003-05-28 continuing daily deposited born digital 362 p. Table of Contents: AE 2.7: GS 4.107: AE 2.106: KF70.A2 https://www.govinfo.gov/app/details/FR-2003-05-28 P0b002ee1809e9299 0097-6326 0042-1219 0364-1406 769-004-00000-9 000582072 f:fr28my03 https://www.govinfo.gov/app/details/FR-2003-05-28 https://www.govinfo.gov/content/pkg/FR-2003-05-28/pdf/FR-2003-05-28.pdf https://www.govinfo.gov/content/pkg/FR-2003-05-28/xml/FR-2003-05-28.xml fdlp 31587 31936 DGPO 2010-09-23 2024-06-07 FR-2003-05-28 machine generated eng FR FR-2003-05-28 68 102