United States Government Publishing Office
publisher
pbl
distributor
dst
United States
National Archives and Records Administration
Office of the Federal Register
author
aut
Government Organization
text
government publication
eng
FR
Regulatory Information
2002_register
executive
2010-09-23
article
Effluent Limitations Guidelines, Pretreatment Standards, and New Source Performance Standards for the Metal Products and Machinery Point Source Category; Notice of Data Availability
Part III
Proposed Rules
D09002ee1bdef4788
D09002ee1bdef485d
United States
Environmental Protection Agency
originator
org
United States Government Agency or Subagency
On January 3, 2001 (66 FR 424), EPA published a proposal to establish technology-based effluent limitations guidelines and pretreatment standards for the metal products and machinery (MP&M) point source category. The proposal would apply to approximately 10,000 facilities that manufacture, rebuild, or maintain metal products, parts, or machines in eight regulatory subcategories. EPA developed the proposal to address changes in the metal finishing and electroplating sectors over the last 20 years, including measures that reduce pollution. The proposal would establish national regulations for some industry sectors for the first time as well as increasing the degree of environmental protection from that achieved under the previous rules. In the proposal, EPA specifically solicited comment on 43 issues in addition to the general comment solicitation. EPA received comments from various stakeholders, including State and local regulatory authorities, environmental groups, individual industrial facilities and industry groups, and private citizens. This document presents a summary of data received in comments since the proposal and additional data collected by EPA and describes how these data may be used by EPA in developing final MP&M regulations. EPA is evaluating how the comments and new data may change certain aspects of the proposal and how this information might affect the regulatory options considered for the proposal. EPA is also evaluating the underlying data and methodology that EPA uses to estimate the costs, pollutant load reductions, and financial impacts associated with the regulation in light of the comments and new information. The document describes EPA's current thinking on these subjects and presents information on how the new data and information received since proposal would affect the proposed limitations and standards. Today, EPA is making these data and new information available for public review and comment. EPA solicits public comment on the issues and information presented in this notice of data availability and in the administrative record supporting this document.
67 FR 38752
https://www.govinfo.gov/app/details/FR-2002-06-05/02-13808
02-13808
fr05jn02-16
RIN 2040-AB79
6560-50-P
FRL-7221-4
https://www.govinfo.gov/app/details/FR-2002-06-05/02-13808
https://www.govinfo.gov/content/pkg/FR-2002-06-05/html/02-13808.htm
https://www.govinfo.gov/content/pkg/FR-2002-06-05/pdf/02-13808.pdf
57 p.
38752
38808
67 FR 38752
Code of Federal Regulations
Title 40 Part 413
40 CFR Part 413
Code of Federal Regulations
Title 40 Part 433
40 CFR Part 433
Code of Federal Regulations
Title 40 Part 438
40 CFR Part 438
Code of Federal Regulations
Title 40 Part 463
40 CFR Part 463
Code of Federal Regulations
Title 40 Part 464
40 CFR Part 464
Code of Federal Regulations
Title 40 Part 467
40 CFR Part 467
Code of Federal Regulations
Title 40 Part 471
40 CFR Part 471
Regulation Identification Number 2040-AB79
RIN 2040-AB79
Effluent Limitations Guidelines, Pretreatment Standards, and New Source Performance Standards for the Metal Products and Machinery Point Source Category; Notice of Data Availability; Federal Register Vol. 67, Issue
PRORULE
02-13808
III
ENVIRONMENTAL PROTECTION AGENCY
2002-07-22
FRL-7221-4
6560-50-P
02-13808
Notice of data availability.
On January 3, 2001 (66 FR 424), EPA published a proposal to establish technology-based effluent limitations guidelines and pretreatment standards for the metal products and machinery (MP&M) point source category. The proposal would apply to approximately 10,000 facilities that manufacture, rebuild, or maintain metal products, parts, or machines in eight regulatory subcategories. EPA developed the proposal to address changes in the metal finishing and electroplating sectors over the last 20 years, including measures that reduce pollution. The proposal would establish national regulations for some industry sectors for the first time as well as increasing the degree of environmental protection from that achieved under the previous rules. In the proposal, EPA specifically solicited comment on 43 issues in addition to the general comment solicitation. EPA received comments from various stakeholders, including State and local regulatory authorities, environmental groups, individual industrial facilities and industry groups, and private citizens. This document presents a summary of data received in comments since the proposal and additional data collected by EPA and describes how these data may be used by EPA in developing final MP&M regulations. EPA is evaluating how the comments and new data may change certain aspects of the proposal and how this information might affect the regulatory options considered for the proposal. EPA is also evaluating the underlying data and methodology that EPA uses to estimate the costs, pollutant load reductions, and financial impacts associated with the regulation in light of the comments and new information. The document describes EPA's current thinking on these subjects and presents information on how the new data and information received since proposal would affect the proposed limitations and standards. Today, EPA is making these data and new information available for public review and comment. EPA solicits public comment on the issues and information presented in this notice of data availability and in the administrative record supporting this document.
You must submit comments by July 22, 2002.
For additional information, contact Mr. Carey A. Johnston at (202) 566-1014 or at the following e-mail
Water pollution; effluent guidelines for point source categories:
Metal products and machinery,
johnston.carey@epa.gov
mpm.comments@epa.gov
http://www.nncc.org
www.usace.army.mil/inet/usace-docs/eng-manuals/em1110-1-4012/chap2.pdf
Federal Register
Vol. 67, no. 108
Office of the Federal Register, National Archives and Records Administration
2002-06-05
continuing
daily
deposited
born digital
265 p.
Table of Contents:
AE 2.7:
GS 4.107:
AE 2.106:
KF70.A2
https://www.govinfo.gov/app/details/FR-2002-06-05
P0b002ee1809a81fc
0097-6326
0042-1219
0364-1406
769-004-00000-9
000582072
f:fr05jn02
https://www.govinfo.gov/app/details/FR-2002-06-05
https://www.govinfo.gov/content/pkg/FR-2002-06-05/pdf/FR-2002-06-05.pdf
https://www.govinfo.gov/content/pkg/FR-2002-06-05/xml/FR-2002-06-05.xml
fdlp
38583
38840
DGPO
2010-09-23
2023-05-04
FR-2002-06-05
machine generated
eng
FR
FR-2002-06-05
67
108