[Federal Register Volume 90, Number 246 (Tuesday, December 30, 2025)]
[Rules and Regulations]
[Pages 61063-61067]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2025-23996]
=======================================================================
-----------------------------------------------------------------------
POSTAL SERVICE
39 CFR Part 111
Shape-Based Labeling Lists
AGENCY: Postal Service.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The Postal Service (USPS[supreg]) is amending Mailing
Standards of the United States Postal Service, Domestic Mail Manual
(DMM[supreg]) in various sections to implement shape-based labeling
lists for SCF letters, flats, and parcels.
DATES: Effective Date: February 1, 2025.
FOR FURTHER INFORMATION CONTACT: Doriane Harley at (202) 268-2537 or
Dale Kennedy at (202) 268-6592.
SUPPLEMENTARY INFORMATION: The Postal Service (USPS[supreg]) is
implementing shape-based labeling lists for SCF prepared mailpieces.
Labeling lists L005, L016, and L051 will be used for letters, flats,
and parcels respectively.
Market Dominant comments on Proposed changes and USPS responses.
The Postal Service did not receive any formal comments on the April
2024 proposed rule (90 FR 52266-52270).
The Postal Service adopts the following changes to Mailing
Standards of the United States Postal Service, Domestic Mail Manual
(DMM), incorporated by reference in the Code of Federal Regulations. We
will publish an appropriate amendment to 39 CFR part 111 to reflect
these changes.
List of Subjects in 39 CFR Part 111
Administrative practice and procedure, Postal Service.
Accordingly, the Postal Service amends Mailing Standards of the
United States Postal Service, Domestic Mail Manual (DMM), incorporated
by reference in the Code of Federal Regulations as follows (see 39 CFR
111.1):
PART 111--[AMENDED]
0
1. The authority citation for 39 CFR part 111 continues to read as
follows:
Authority: 5 U.S.C. 552(a); 13 U.S.C. 301-307; 18 U.S.C. 1692-
1737; 39 U.S.C. 101, 401-404, 414, 416, 3001-3018, 3201-3220, 3401-
3406, 3621, 3622, 3626, 3629, 3631-3633, 3641, 3681-3685, and 5001.
0
2. Revise the Mailing Standards of the United States Postal Service,
Domestic Mail Manual (DMM) as follows:
Mailing Standards of the United States Postal Service, Domestic Mail
Manual (DMM)
* * * * *
207 Periodicals
* * * * *
18.0 General Mail Preparation
* * * * *
18.3 Presort Terms
Terms used for presort levels are defined as follows:
* * * * *
[Revise items (p) and (q) to read as follows:]
p.SCF: the separation includes pieces for two or more 3-digit areas
served by the same sectional center facility (SCF)/local processing
center (LPC [letters/flats]) or regional processing and distribution
center (RPDC [parcels]) (see L005, Column B for letters, L016, Column B
for flats, and L051, Column B for parcels).
q. Origin/entry SCF: the separation includes bundles for one or
more 3-digit areas served by the same sectional center facility (SCF)/
local processing center (LPC [letters/flats]) or regional processing
and distribution center (RPDC [parcels]) (see L005, Column B for
letters, L016, Column B for flats, and L051, Column B for parcels) in
whose service area the mail is verified/entered.
* * * * *
18.4 Mail Preparation Terms
* * * * *
22.0 Preparing Nonbarcoded (Presorted) Periodicals
* * * * *
22.6 Sack Preparation
[Revise items (c) and (d) to read as follows:]
c. SCF/LPC, required at 72 pieces, optional at 24 pieces minimum.
1. Line 1: use L016, Column B for flats, L051, Column B for
parcels.
2. Line 2: ``PER'' or ``NEWS'' as applicable; followed by ``FLTS''
or ``NONSTD'' as applicable; followed by ``SCF''; followed by ``NON
BC'' for flats.
d. Origin/entry SCF/LPC, required for the SCF/LPC of the origin
(verification) office, optional for the SCF/LPC of an entry office
other than the origin office, (no minimum).
1. Line 1: use L016, Column B for flats, L051, Column B for
parcels.
2. Line 2: use ``PER'' or ``NEWS'' as applicable; followed by
``FLTS'' or ``NONSTD'' as applicable; followed by ``SCF''; followed by
``NON BC'' for flats.
* * * * *
22.7 Tray Preparation--Flat-Size Nonbarcoded Pieces
* * * * *
[Revise items (d) and (e) to read as follows:]
d. SCF/LPC, required at 72 pieces, optional at 24 pieces minimum.
1. Line 1: L016, Column B.
2. Line 2: ``PER'' or ``NEWS'' as applicable; followed by ``FLTS'';
followed by ``SCF NON BC.''
e. Origin SCF/LPC (required) and entry SCF/LPC(s) (optional), no
minimum, labeling:
1. Line 1: L016, Column B.
2. Line 2: ``PER'' or ``NEWS'' as applicable; followed by ``FLTS'';
followed by ``SCF NON BC.''
* * * * *
23.0 Preparing Carrier-Route Periodicals
* * * * *
25.0 Preparing Flat-Size Barcoded (Automation) Periodicals
* * * * *
25.4 Sacking and Labeling
* * * * *
[Revise items (c) and (d) to read as follows:]
c. SCF/LPC, required at 72 pieces, optional at 24 pieces; fewer
pieces not permitted; labeling:
1. Line 1: use L016, Column B.
2. Line 2: use ``PER FLTS SCF BC'' or ``NEWS FLTS SCF BC,'' as
applicable.
d. Origin SCF/LPC (required) and entry SCF/LPC(s) (optional), no
minimum; labeling:
1. Line 1: use L016, Column B.
2. Line 2: use ``PER FLTS SCF BC'' or ``NEWS FLTS SCF BC,'' as
applicable.
* * * * *
25.5 Tray Preparation--Flat-Size Barcoded Pieces
* * * * *
[[Page 61064]]
[Revise items (d) and (e) to read as follows:]
d. SCF/LPC (required), 72-piece minimum, optional at 24 pieces,
fewer pieces not permitted; labeling:
1. Line 1: L016, Column B.
2. Line 2: ``PER'' ``NEWS'' as applicable; followed by ``FLTS'';
followed by ``SCF BC.''
e. Origin SCF/LPC (required) and entry SCF/LPCs) (optional), no
minimum, labeling:
1. Line 1: L016, Column B.
2. Line 2: ``PER'' ``NEWS'' as applicable; followed by ``FLTS'';
followed by ``SCF BC.''
* * * * *
29.0 Destination Entry
* * * * *
29.3 Destination Sectional Center Facility/Local Processing Center
29.3.1 Definition
[Revise the text of 29.3.1 to read as follows:]
For this standard, destination sectional center facility (DSCF)/
local processing center (LPC [letters/flats])/regional processing and
distribution center (RPDC [parcels]) includes a USPS-designated
facility or the facilities listed in L005 for letters, L016 for flats,
L051 for parcels.
* * * * *
235 Mail Preparation
* * * * *
1.0 General Definition of Terms
* * * * *
1.3 Terms for Presort Levels
1.3.1 Letters and Cards
Terms used for presort levels are defined as follows: * * *
[Revise item (f) to read as follows:]
f. Origin/optional entry SCF: the separation includes bundles for
one or more 3-digit areas served by the same sectional center facility
(SCF)/local processing center (LPC) (see L005, Column B) in whose
service area the mail is verified/entered. Subject to standard, this
separation is required regardless of the mail volume.
* * * * *
1.3.2 Flats
Terms used for presort levels are defined as follows: * * *
[Revise item (b) to read as follows:]
b. 3-digit: The ZIP Code in the delivery address on all pieces
begins with the same three digits (see L002, Column C).
* * * * *
7.0 Preparation of Nonautomation Flats
* * * * *
7.4 Traying and Labeling
Preparation sequence, tray size, and labeling: * * *
b. 3-digit (optional); full tray or 50 piece minimum (no overflow),
except for one less-than-full tray for each origin 3-digit(s);
labeling:
[Revise item b(1) to read as follows:]
1. Line 1: L002, Column C.
* * * * *
8.0 Preparation of Automation Flats
* * * * *
8.5 Traying and Labeling
[Revise the text of 8.5 to read as follows:]
Tray size, preparation sequence, and Line 1 labeling:
a. 5-digit scheme: optional, but required for 5-digit price (full
tray or 50-piece minimum); one less-than-full or overflow tray allowed;
see 8.6 for scheme; labeling:
1. Line 1: L007, Column B.
2. Line 2: ``FCM FLTS BC 5D SCHEME''
b. 5-digit: optional, but required for 5-digit price (full tray or
50-piece minimum); one less-than-full or overflow tray allowed;
labeling:
1. Line 1: city, state, and 5-digit ZIP Code on mail (see 204.3.0,
for overseas military mail).
2. Line 2: ``FCM FLTS 5D BC''
c. 3-digit: optional, but required for 3-digit price (full tray or
50-piece minimum); one less-than-full or overflow tray allowed;
labeling:
1. Line 1: L002, Column C.
2. Line 2: ``FCM FLTS 3D BC.''
d. Origin 3-digit: required for each 3-digit ZIP Code served by the
SCF/LPC of the origin (verification) office; no minimum; labeling:
1. Line 1: L002, Column C.
2. Line 2: ``FCM FLTS 3D BC.''
e. ADC: optional, but required for ADC price (full tray or 50-piece
minimum); one less-than-full or overflow tray allowed; group pieces by
3-digit ZIP Code prefix; labeling:
1. Line 1: L004, Column B.
2. Line 2: ``FCM FLTS ADC BC.''
Exception: Pieces are not required to be grouped by 3-digit ZIP
Code prefix in ADC trays if the mailing is prepared using an MLOCR/
barcode sorter, and standardized documentation is submitted.
f. Mixed ADC (required); no minimum for price eligibility. Group
pieces by ADC. labeling:
1. Line 1 use L201; for mail originating in ZIP Code areas in
Column A, use ``MXD'' followed by city, state, and 3-digit ZIP Code
prefix in Column C (use ``MXD'' instead of ``OMX'' in the destination
line and ignore Column B).
2. Line 2: ``FCM FLTS BC WKG.''
Mailers using a MLOCR/barcode sorter and submitting standardized
documentation need not group pieces by ADC.
* * * * *
245 Mail Preparation
* * * * *
1.0 General Information for Mail Preparation
* * * * *
1.3 Terms for Presort Levels
1.3.1 Letters
Terms used for presort levels are defined as follows: * * *
[Revise item (h) to read as follows:]
h. Origin/optional entry SCF: the separation includes bundles for
one or more 3-digit areas served by the same sectional center facility
(SCF)/local processing center (LPC) (see L005) in whose service area
the mail is verified or entered. Subject to standard, this separation
is required regardless of mail volume.
* * * * *
1.3.2 Flats
Terms used for presort levels are defined as follows: * * *
[Revise items (l) and (m) to read as follows:]
l. SCF: the separation includes pieces for two or more 3-digit
areas served by the same sectional center facility (SCF)/local
processing center (LPC) (see L016). Exception: Where required or
permitted by standard, mail for a single 3-digit area may be prepared
in an SCF separation when no mail for other 3-digit ZIP Code areas is
available. For pallets, the SCF sort may include mail for a single 3-
digit ZIP Code area.
m. Origin/optional entry SCF: the separation includes bundles for
one or more 3-digit areas served by the same sectional center facility
(SCF)/local processing center (LPC) (see L016) in whose service area
the mail is verified or entered. Subject to standard, this separation
is required regardless of the mail volume.
* * * * *
1.3.3 Marketing Parcels
Terms used for presort levels are defined as follows: * * *
[Revise item (d) to read as follows:]
d. SCF: The separation includes pieces for two or more 3-digit
areas served by the same sectional center
[[Page 61065]]
facility (SCF)/regional processing and distribution center (RPDC) (see
L051). Exception: Where required or permitted by standard, mail for a
single 3-digit area may be prepared in an SCF separation when no mail
for other 3-digit ZIP Code areas is available. For pallets, the SCF
sort may include mail for a single 3-digit ZIP Code area.
* * * * *
11.0 Preparing Presorted Parcels
* * * * *
11.4 Preparing Nonstandard Marketing Parcels (Less Than 3.5 Ounces) and
Nonprofit Nonstandard Priced Parcels
* * * * *
11.4.3 Sacking and Labeling
Preparation sequence, sack size, and labeling: * * *
[Revise item (b) to read as follows:]
b. SCF; 10-pound minimum; labeling:
1. For Line 1, Use L051, Column B.
2. For Line 2, ``STD NONSTD SCF.''
* * * * *
246 Enter and Deposit
* * * * *
3.0 Destination Sectional Center Facility (DSCF)/Local Processing
Center (LPC) Entry
3.1 Definition
[Revise the text of 3.1 to read as follows:]
For this standard, destination sectional center facility (DSCF)/
local processing center (LPC) refers to the facilities listed in L005
for letters, L016 for flats, L051 for parcels.
* * * * *
255 Mail Preparation
* * * * *
4.3 Preparing Destination SCF (DSCF)/Destination Regional Processing
and Distribution Center (DRPDC) Parcel Select
* * * * *
4.3.2 Basic Standards
Pieces must meet the applicable standards in 4.0 and the following
criteria: * * *
[Revise item (d) to read as follows:]
d. Any remaining nonstandard parcels (as defined in 201.7.6) sorted
to 3-digit ZIP Code prefixes in L051, Column B. Machinable parcels may
not be sorted to the 3-digit level.
* * * * *
265 Mail Preparation
* * * * *
5.0 Preparing Presorted Flats
* * * * *
5.3 Sacking
* * * * *
5.3.3 Sacking and Labeling
Preparation sequence and labeling: * * *
[Revise item (c) to read as follows:]
c. SCF (optional); labeling:
1. Line 1: L016, Column B.
2. Line 2: ``PSVC FLTS SCF NON BC.''
* * * * *
7.0 Preparing Barcoded Flats
* * * * *
7.4 Sacking
Preparation sequence, sack size, and labeling: * * *
[Revise item (c) to read as follows:]
c. SCF (optional); minimum 20 addressed pieces; labeling:
1. Line 1: L016, Column B.
2. Line 2: ``PSVC FLTS SCF BC.''
* * * * *
8.0 Preparing Presorted Parcels
* * * * *
8.2 Preparing Nonstandard Parcels
* * * * *
8.2.3 Sacking and Labeling
Preparation sequence and labeling: * * *
[Revise item (c) to read as follows:]
c. SCF (optional); labeling:
1. Line 1: L051, Column B.
2. Line 2: ``PSVC NONSTD SCF.''
* * * * *
266 Enter and Deposit
* * * * *
4.0 Destination Sectional Center Facility (DSCF)/Local Processing
Center (LPC) Entry
4.1 Eligibility
Bound Printed Matter pieces in a mailing meeting the standards in
3.0 are eligible for the DSCF price when they meet all of the following
additional conditions: * * *
[Revise the text of item (b) to read as follows:]
b. Are deposited at a DSCF/LPC (flats)/RPDC (parcels) listed in
L016 for flats or L051 for parcels or a USPS-designated facility and
are addressed for delivery within the DSCF's/LPC's/RPDC's service area.
* * * * *
705 Advanced Preparation and Special Postage Payment Systems
* * * * *
8.0 Preparing Pallets
* * * * *
8.10 Pallet Presort and Labeling
8.10.1 First-Class Mail--Letter Trays or Flat Trays
* * * * *
[Revise items (b) and (c) to read as follows:]
b. Origin SCF/LPC (local mail). Required; no minimum. Pallets
contain trays destined for the 3-digit ZIP Codes serviced by the origin
SCF/LPC facility in L005 for letters, L016 for flats. 3-digit ZIP Code
(from L005 for AADC trays and L004 for ADC trays) is within the origin
SCF's/LPC's service area; and must place trays containing pieces paid
at the single-piece price on origin SCF/LPC pallets, unless required to
be presented separately by special postage-payment authorization or
customer service agreement (CSA). Labeling:
1. Line 1: L005, Column B for Letters, L016, Column B for Flats.
2. Line 2: ``FCM LTRS'' or ``FCM FLTS,'' followed by ``SCF.''
c. SCF/LPC. Required. For destinations listed in L201, based on
origin ZIP Code. Pallets contain trays destined for the 3-digit ZIP
Codes in L005 for Letters, L016 for Flats. Mailers may, at their
option, place AADC or ADC trays on SCF/LPC pallets when the tray's
``label to'' 3-digit ZIP Code (L005 for AADC trays, and L004 for ADC)
is within that SCF's/LPC's service area. Labeling:
1. Line 1: L005, Column B for letters, L016, Column B for flats.
2. Line 2: ``FCM LTRS'' or ``FCM FLTS,'' followed by ``SCF.''
* * * * *
8.10.2 Periodicals--Bundles, Sacks, Letter Trays or Flat Trays
* * * * *
[Revise item (h) to read as follows:]
h. SCF/LPC (letters, flats)/RPDC (parcels), required, permitted for
bundles, trays, and sacks (nonstandard parcels only). The pallet may
contain carrier-route-price, automation-price, and/or Presorted-price
mail for the 3-digit ZIP Code groups in L005 for letters, L016 for
flats, L051 for parcels. Labeling:
1. Line 1: L005, Column B for letters, L016, Column B for flats,
L051, Column B for parcels.
2. Line 2: ``PER'' or ``NEWS,'' as applicable; followed by
``FLTS,'' ``NONSTD,'' or ``LTRS,'' as applicable; followed by ``SCF'';
followed by ``BARCODED'' (or ``BC'') if pallet contains automation-
price mail; followed by ``NONBARCODED'' (or
[[Page 61066]]
``NBC'') if pallet contains carrier-route-price mail and/or Presorted-
price mail.
* * * * *
8.10.3 USPS Marketing Mail--Bundles, Sacks, or Trays
* * * * *
[Revise item (f) to read as follows:]
f. SCF/LPC (letters, flats)/RPDC (parcels), required, permitted for
bundles, trays, and sacks (nonstandard parcels only). The pallet may
contain carrier-route, automation-price, and/or presorted-price mail
for the 3-digit ZIP Code groups in L005 for letters, L016 for flats,
L051 for parcels. Mailers may, at their option, place AADC trays on
SCF/LPC (letters, flats)/RPDC (parcels) pallets when the tray's ``label
to'' 3-digit ZIP Code (from L005) is within that SCF's/LPC's (letters,
flats)/RPDC's (parcels) service area. Labeling:
1. Line 1: Use L005, Column B for letters, L016, Column B for
flats, L051, Column B for parcels.
2. Line 2: For flats and nonstandard parcels, ``STD'' followed by
``FLTS'' or ``NONSTD,'' as applicable; followed by ``SCF''; followed by
``BARCODED'' (or ``BC'') if pallet contains automation price mail;
followed by ``NONBARCODED'' (or ``NBC'') if pallet contains carrier
route and/or Presorted price mail. For letters, ``STD LTRS SCF'';
followed by ``BC'' if pallet contains barcoded letters; followed by
``MACH'' if pallet contains machinable letters; followed by ``MAN'' if
pallet contains nonmachinable letters.
* * * * *
8.10.4 Package Services Flats--Bundles and Sacks
* * * * *
[Revise item (e) to read as follows:]
e. SCF/LPC, required, permitted for bundles and sacks. The pallet
may contain carrier route and/or Presorted price mail with or without a
barcode for the 3-digit ZIP Code groups in L016. Labeling:
1. Line 1: Use L016, Column B.
2. Line 2: ``PSVC FLTS SCF''; followed by ``BARCODED'' (or ``BC'')
if pallet contains Presorted price mail with a barcode; followed by
``NONBARCODED'' (or ``NBC'') if pallet contains carrier route and/or
Presorted price mail without a barcode.
* * * * *
8.10.5 Package Services Nonstandard Parcels--Bundles and Sacks
* * * * *
[Revise item (h) to read as follows:]
h. SCF/RPDC, required, permitted for bundles and sacks. The pallet
may contain carrier-route-price and/or Presorted-price mail for the 3-
digit ZIP Code groups in L051. Labeling:
1. Line 1: Use L051, Column B.
2. Line 2: ``PSVC NONSTD SCF.''
* * * * *
8.10.6 Combined Mailings of USPS Marketing Mail Marketing Parcels 3.5
Ounces or More, USPS Marketing Mail, Package Services, and Parcel
Select Machinable Parcels
* * * * *
[Revise item (c) to read as follows:]
c. SCF/RPDC, optional, but required for DSCF prices. Pallets must
contain only parcels for the 3-digit ZIP Code groups in L051. Labeling:
1. Line 1: Use L051, Column B.
2. Line 2: ``STD/PSVC MACH SCF.''
* * * * *
8.10.8 Nonstandard Parcels Weighing 2 Ounces or More--USPS Marketing
Mail, Including Marketing Parcels
* * * * *
[Revise item (c) to read as follows:]
c. SCF/RPDC, required. Allowed only for mail deposited at a DSCF/
DRPDC to claim SCF price. labeling:
1. Line 1: Use L051, Column B.
2. Line 2: Use ``STD NONSTD SCF.''
* * * * *
9.0 Combining Bundles of Automation and Nonautomation Flats in Flat
Trays and Sacks
9.1 Periodicals
* * * * *
9.1.4 Optional Sack Preparation and Labeling
* * * * *
[Revise item (c) to read as follows:]
c. SCF, required at 72 pieces, optional at 24 pieces minimum;
labeling:
1. Line 1: use L016, Column B.
2. Line 2: use ``PER'' or ``NEWS'' as applicable and ``FLTS SCF BC/
NBC.''
* * * * *
9.1.5 Flay Tray Preparation--Flat-Size Machinable Pieces
* * * * *
[Revise items (d) and (e) to read as follows:]
d. SCF, required at 72 pieces; optional at 24 pieces minimum,
labeling:
1. Line 1: L016, Column B.
2. Line 2: ``PER'' or ``NEWS'' as applicable; followed by ``FLTS'';
followed by ``SCF BC/NBC.''
e. Origin SCF (required) and entry SCF(s) (optional), no minimum,
labeling:
1. Line 1: L016, Column B.
2. Line 2: ``PER'' or ``NEWS'' as applicable; followed by ``FLTS'';
followed by ``SCF BC/NBC.''
* * * * *
9.3 Bound Printed Matter
* * * * *
9.3.4 Flat Tray/Sack Preparation and Labeling
* * * * *
[Revise item (c) to read as follows:]
c. SCF, optional, minimum 20 addressed pieces; labeling:
1. Line 1: L016, Column B.
2. Line 2: ``PSVC FLTS SCF BC/NBC.''
* * * * *
10.0 Merging Bundles of Flats Using the City State Product
* * * * *
10.2 USPS Marketing Mail
* * * * *
10.2.5 Pallet Preparation and Labeling
* * * * *
[Revise item (g) to read as follows:]
g. SCF/LPC, required, may contain carrier-route price, automation-
price, and Presorted-price bundles. Labeling:
1. Line 1: use L016, Column B.
2. Line 2: ``STD FLTS SCF''; followed by ``BARCODED'' or ``BC'' if
the pallet contains automation price mail; followed by ``NONBARCODED''
or ``NBC'' if the pallet contains Presorted price mail and/or carrier
route price mail.
* * * * *
12.0 Merging Bundles of Flats on Pallets Using a 5 Percent Threshold
* * * * *
12.2 USPS Marketing Mail
* * * * *
12.2.3 Pallet Preparation and Labeling
* * * * *
[Revise item (g) to read as follows:]
g. SCF/LPC, required, may contain carrier-route price, automation-
price, and Presorted-price bundles. Labeling:
1. Line 1: use L016, Column B.
2. Line 2: ``STD FLTS SCF''; followed by ``BARCODED'' or ``BC'' if
the pallet contains automation price mail; followed by ``NONBARCODED''
or ``NBC'' if the pallet contains Presorted price mail and/or carrier
route price mail.
* * * * *
13.0 Merging Bundles of Flats on Pallets Using the City State Product
and a 5-Percent Threshold
* * * * *
13.2 USPS Marketing Mail
* * * * *
13.2.4 Pallet Preparation and Labeling
* * * * *
[[Page 61067]]
[Revise item (g) to read as follows:]
g. SCF/LPC, required, may contain carrier-route price, automation-
price, and Presorted-price bundles. Labeling:
1. Line 1: use L016, Column B.
2. Line 2: ``STD FLTS SCF''; followed by ``BARCODED'' or ``BC'' if
the pallet contains automation price mail; and followed by
``NONBARCODED'' or ``NBC'' if the pallet contains Presorted price mail
and/or carrier route price mail.
* * * * *
15.0 Combining USPS Marketing Mail Flats, Bound Printed Matter Flats,
and Periodicals Flats
* * * * *
15.4 Pallet Preparation
15.4.1 Pallet Preparation, Sequence and Labeling
* * * * *
[Revise item (g) to read as follows:]
g. SCF/LPC, required. Pallet may contain carrier route, automation
or Presorted mail for the 3-digit ZIP Code groups in L016. Labeling:
1. Line 1: Use L016, Column B.
2. Line 2: ``STD/BPM/PER FLTS SCF''; followed by ``BARCODED'' (or
``BC''); ``NONBARCODED'' (or ``NBC'') for Presorted mail, or
``BARCODED/NONBARCODED'' (or ``BC/NBC'') for mixed pallets; followed by
``MIX COMAIL.''
* * * * *
Colleen Hibbert-Kapler,
Attorney, Ethics and Legal Compliance.
[FR Doc. 2025-23996 Filed 12-29-25; 8:45 am]
BILLING CODE P