[Federal Register Volume 90, Number 53 (Thursday, March 20, 2025)]
[Proposed Rules]
[Pages 13116-13117]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2025-04653]



[[Page 13116]]

=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 63

RIN 2060-AU73
[EPA-HQ-OAR-2024-0303; FRL-7623-03-OAR]


National Emission Standards for Hazardous Air Pollutants: 
Chemical Manufacturing Area Sources Technology Review; Comment Period 
Extension

AGENCY: Environmental Protection Agency (EPA).

ACTION: Proposed rule; extension of public comment period.

-----------------------------------------------------------------------

SUMMARY: On January 22, 2025, the U.S. Environmental Protection Agency 
(EPA) proposed a rule titled ``National Emission Standards for 
Hazardous Air Pollutants: Chemical Manufacturing Area Sources 
Technology Review.'' The EPA is extending the comment period on this 
proposed rule, which was scheduled to close on March 24, 2025. The 
comment period will now remain open until April 14, 2025, to allow 
additional time for stakeholders to review and comment on the proposal.

DATES: The public comment period for the proposed rule published in the 
Federal Register (FR) on January 22, 2025, (90 FR 7942) is being 
extended by 21 days. Written comments must now be received on or before 
April 14, 2025.

ADDRESSES: Submit comments, identified by Docket ID No. EPA-HQ-OAR-
2024-0303, by any of the following methods:
     Federal eRulemaking Portal: https://www.regulations.gov/ 
(our preferred method). Follow the online instructions for submitting 
comments.
     Email: [email protected]. Include Docket ID No. EPA-
HQ-OAR-2024-0303 in the subject line of the message.
     Fax: (202) 566-9744. Attention Docket ID No. EPA-HQ-OAR-
2024-0303.
     Mail: U.S. Environmental Protection Agency, EPA Docket 
Center, Docket ID No. EPA-HQ-OAR-2024-0303, Mail Code 28221T, 1200 
Pennsylvania Avenue NW, Washington, DC 20460.
     Hand Delivery or Courier (by scheduled appointment only): 
EPA Docket Center, WJC West Building, Room 3334, 1301 Constitution 
Avenue NW, Washington, DC 20004. The Docket Center's hours of operation 
are 8:30 a.m.-4:30 p.m., Monday-Friday (except Federal holidays).
    Instructions. All submissions received must include the Docket ID 
No. EPA-HQ-OAR-2024-0303 for this rulemaking. Comments received may be 
posted without change to https://www.regulations.gov/, including any 
personal information provided. For detailed instructions on sending 
comments and additional information on the rulemaking process, see the 
SUPPLEMENTARY INFORMATION section of this document.

FOR FURTHER INFORMATION CONTACT: For questions about this action, 
contact U.S. EPA, Attn: Mr. William Gallagher, Mail Drop: E143-01, 109 
T.W. Alexander Drive, P.O. Box 12055, RTP, North Carolina 27711; 
telephone number: (919) 541-2336; and email address: 
[email protected].

SUPPLEMENTARY INFORMATION: 
    Rationale. On January 22, 2025, the U.S. Environmental Protection 
Agency (EPA) proposed a rule titled ``National Emission Standards for 
Hazardous Air Pollutants: Chemical Manufacturing Area Sources 
Technology Review'' (see 90 FR 7942). The comment period on this 
proposed rule was originally scheduled to close on March 24, 2025. The 
EPA has received a request for additional time to review and comment on 
this proposed rule. The EPA has decided to extend the period by 21 
days. The public comment period will now end on April 14, 2025.
    Docket. The EPA has established a docket for this rulemaking under 
Docket ID No. EPA-HQ-OAR-2024-0303. All documents in the docket are 
listed in https://www.regulations.gov/. Although listed, some 
information is not publicly available, e.g., Confidential Business 
Information (CBI) or other information whose disclosure is restricted 
by statute. Certain other material, such as copyrighted material, is 
not placed on the internet and will be publicly available only in hard 
copy. With the exception of such material, publicly available docket 
materials are available electronically in Regulations.gov.
    Instructions. Direct your comments to Docket ID No. EPA-HQ-OAR-
2024-0303. The EPA's policy is that all comments received will be 
included in the public docket without change and may be made available 
online at https://www.regulations.gov/, including any personal 
information provided, unless the comment includes information claimed 
to be CBI or other information whose disclosure is restricted by 
statute. Do not submit electronically to https://www.regulations.gov/ 
any information that you consider to be CBI or other information whose 
disclosure is restricted by statute. This type of information should be 
submitted as discussed below.
    The EPA may publish any comment received to its public docket. 
Multimedia submissions (audio, video, etc.) must be accompanied by a 
written comment. The written comment is considered the official comment 
and should include discussion of all points you wish to make. The EPA 
will generally not consider comments or comment contents located 
outside of the primary submission (i.e., on the web, cloud, or other 
file sharing system). For additional submission methods, the full EPA 
public comment policy, information about CBI or multimedia submissions, 
and general guidance on making effective comments, please visit https://www.epa.gov/dockets/commenting-epa-dockets.
    The https://www.regulations.gov/ website allows you to submit your 
comment anonymously, which means the EPA will not know your identity or 
contact information unless you provide it in the body of your comment. 
If you send an email comment directly to the EPA without going through 
https://www.regulations.gov/, your email address will be automatically 
captured and included as part of the comment that is placed in the 
public docket and made available on the internet. If you submit an 
electronic comment, the EPA recommends that you include your name and 
other contact information in the body of your comment and with any 
digital storage media you submit. If the EPA cannot read your comment 
due to technical difficulties and cannot contact you for clarification, 
the EPA may not be able to consider your comment. Electronic files 
should not include special characters or any form of encryption and be 
free of any defects or viruses. For additional information about the 
EPA's public docket, visit the EPA Docket Center homepage at https://www.epa.gov/dockets.
    Submitting CBI. Do not submit information containing CBI to the EPA 
through https://www.regulations.gov/. Clearly mark the part or all of 
the information that you claim to be CBI. For CBI information on any 
digital storage media that you mail to the EPA, note the docket ID, 
mark the outside of the digital storage media as CBI, and identify 
electronically within the digital storage media the specific 
information that is claimed as CBI. In addition to one complete version 
of the comments that includes information claimed as CBI, you must 
submit a copy of the comments that does not contain the information 
claimed as CBI directly to the public docket through the procedures 
outlined in Instructions above. If you submit any digital storage media 
that does not contain CBI, mark

[[Page 13117]]

the outside of the digital storage media clearly that it does not 
contain CBI and note the docket ID. Information not marked as CBI will 
be included in the public docket and the EPA's electronic public docket 
without prior notice. Information marked as CBI will not be disclosed 
except in accordance with procedures set forth in 40 Code of Federal 
Regulations (CFR) part 2.
    Our preferred method to receive CBI is for it to be transmitted 
electronically using email attachments, File Transfer Protocol (FTP), 
or other online file sharing services (e.g., Dropbox, OneDrive, Google 
Drive). Electronic submissions must be transmitted directly to the 
OAQPS CBI Office at the email address [email protected] and, as 
described above, should include clear CBI markings and note the docket 
ID. If assistance is needed with submitting large electronic files that 
exceed the file size limit for email attachments, and if you do not 
have your own file sharing service, please email [email protected] to 
request a file transfer link. If sending CBI information through the 
postal service, please send it to the following address: U.S. EPA, 
Attn: OAQPS Document Control Officer, Mail Drop: C404-02, 109 T.W. 
Alexander Drive, P.O. Box 12055, Research Triangle Park, North Carolina 
27711, Attention Docket ID No. EPA-HQ-OAR-2024-0303. The mailed CBI 
material should be double wrapped and clearly marked. Any CBI markings 
should not show through the outer envelope.

Penny Lassiter,
Director, Sector Policies and Programs Division.
[FR Doc. 2025-04653 Filed 3-19-25; 8:45 am]
BILLING CODE 6560-50-P