[Federal Register Volume 90, Number 48 (Thursday, March 13, 2025)] [Notices] [Pages 11946-11947] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2025-04027] [[Page 11946]] ----------------------------------------------------------------------- DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration [RTID 0648-XE714] Atlantic Highly Migratory Species; Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and Identification Workshops AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION: Notice of public workshops. ----------------------------------------------------------------------- SUMMARY: Free Atlantic Shark Identification Workshops and Safe Handling, Release, and Identification Workshops will be held in April, May, and June of 2025. Certain fishermen and shark dealers are required to attend a workshop to meet regulatory requirements and to maintain valid permits. Specifically, the Atlantic Shark Identification Workshop is mandatory for all federally permitted Atlantic shark dealers. The Safe Handling, Release, and Identification Workshop is mandatory for vessel owners and operators who use bottom longline, pelagic longline, or gillnet gear, and who have also been issued shark or swordfish limited access permits. Additional free workshops will be conducted in 2025 and will be announced in a future notice. In addition, NMFS has implemented online recertification workshops for persons who have already taken an in-person training. DATES: The Atlantic Shark Identification Workshops will be held on April 17, 2025, May 15, 2025, and June 20, 2025. The Safe Handling, Release, and Identification Workshops will be held on April 4, 2025, May 5, 2025, and June 18, 2025. ADDRESSES: The Atlantic Shark Identification Workshops will be held in Medford, NY, Manahawkin, NJ and Fort Lauderdale, FL. The Safe Handling, Release, and Identification Workshops will be held in Mount Pleasant, SC, Fort Walton Beach, FL, and Ronkonkoma, NY. FOR FURTHER INFORMATION CONTACT: Anna Quintrell by email at [email protected] or by phone at 301-427-8503. SUPPLEMENTARY INFORMATION: Atlantic highly migratory species (HMS) fisheries (tunas, swordfish, sharks, and billfish) are managed under the 2006 Consolidated HMS Fishery Management Plan (FMP) and its amendments pursuant to the authority of the Magnuson-Stevens Fishery Conservation and Management Act (Magnuson-Stevens Act; 16 U.S.C. 1801 et seq.) and consistent with the Atlantic Tunas Convention Act (16 U.S.C. 971 et seq.). HMS implementing regulations are at 50 CFR part 635. Section 635.8 describes the requirements for the Atlantic Shark Identification Workshops and Safe Handling, Release, and Identification Workshops. The workshop schedules, registration information, and a list of frequently asked questions regarding the Atlantic Shark Identification and Safe Handling, Release, and Identification workshops are available online at: https://www.fisheries.noaa.gov/atlantic-highly-migratory-species/atlantic-shark-identification-workshops and https://www.fisheries.noaa.gov/atlantic-highly-migratory-species/safe-handling-release-and-identification-workshops. Atlantic Shark Identification Workshops Since January 1, 2008, Atlantic shark dealers have been prohibited from receiving, purchasing, trading, or bartering for Atlantic sharks unless a valid Atlantic Shark Identification Workshop certificate is on the premises of each business listed under the shark dealer permit that first receives Atlantic sharks (71 FR 58057, October 2, 2006). Dealers who attend and successfully complete a workshop are issued a certificate for each place of business that is permitted to receive sharks. These certificate(s) are valid for 3 years. Thus, certificates that were initially issued in 2022 will expire in 2025. Currently, permitted dealers may send a proxy to an Atlantic Shark Identification Workshop. However, if a dealer opts to send a proxy, the dealer must designate a proxy for each place of business covered by the dealer's permit that first receives Atlantic sharks. Only one certificate will be issued to each proxy. A proxy must be a person who is currently employed by a place of business covered by the dealer's permit; is a primary participant in the identification, weighing, and/ or first receipt of fish as they are offloaded from a vessel; and who fills out dealer reports. Atlantic shark dealers are prohibited from renewing a Federal shark dealer permit unless a valid Atlantic Shark Identification Workshop certificate for each business location that first receives Atlantic sharks has been submitted with the permit renewal application. Additionally, a copy of a valid dealer or proxy Atlantic Shark Identification Workshop certificate must be in any trucks or other conveyances that are extensions of a dealer's place of business. Workshop Dates, Times, and Locations 1. April 17, 2025, 12 p.m.-4 p.m., Comfort Inn Medford, 2695 Route 112, Medford, NY 11763. 2. May 15, 2025, 12 p.m.-4 p.m., Holiday Inn Manahawkin, 151 Route 72 East, Manahawkin, NJ 08050. 3. June 20, 2025, 12 p.m.-4 p.m., Hampton Inn Cypress Creek, 720 E Cypress Creek Road, Fort Lauderdale, FL 33334. Registration To register for a scheduled Atlantic Shark Identification Workshop, please contact Eric Sander at [email protected] or at 386-852- 8588. Pre-registration is highly recommended, but not required. Registration Materials To ensure that workshop certificates are linked to the correct permits, participants will need to bring the following specific items to the workshop:Atlantic shark dealer permit holders must bring proof that the attendee is an owner or agent of the business (such as articles of incorporation), a copy of the applicable permit, and proof of identification. Atlantic shark dealer proxies must bring documentation from the permitted dealer acknowledging that the proxy is attending the workshop on behalf of the permitted Atlantic shark dealer for a specific business location, a copy of the appropriate valid permit, and proof of identification. Workshop Objectives The Atlantic Shark Identification Workshops are designed to reduce the number of unknown and improperly identified sharks reported in the dealer reporting form and increase the accuracy of species-specific dealer-reported information. Reducing the number of unknown and improperly identified sharks will improve quota monitoring and the data used in stock assessments. These workshops will train shark dealer permit holders or their proxies to properly identify Atlantic shark carcasses. Safe Handling, Release, and Identification Workshops Since January 1, 2007, shark limited access and swordfish limited access permit holders who fish with longline or gillnet gear have been required to submit a copy of their Safe Handling, Release, and Identification Workshop certificate in order to renew either [[Page 11947]] permit (71 FR 58057, October 2, 2006). These certificate(s) are valid for 3 years. Certificates issued in 2022 will expire in 2025. As such, vessel owners who have not already attended a workshop and received a NMFS certificate, or vessel owners whose certificate(s) will expire prior to the next permit renewal, must attend a workshop to fish with, or renew, their swordfish and shark limited access permits. Additionally, new shark and swordfish limited access permit applicants who intend to fish with longline or gillnet gear must attend a Safe Handling, Release, and Identification Workshop and submit a copy of their workshop certificate before either of the permits will be issued. In addition to vessel owners, at least one operator on board vessels issued a limited access swordfish or shark permit that uses longline or gillnet gear is required to attend a Safe Handling, Release, and Identification Workshop and receive a certificate. Vessels that have been issued a limited access swordfish or shark permit and that use longline or gillnet gear may not fish unless both the vessel owner and operator have valid workshop certificates on board at all times. Vessel operators who have not already attended a workshop and received a NMFS certificate, or vessel operators whose certificate(s) will expire prior to their next fishing trip, must attend a workshop to operate a vessel with swordfish and shark limited access permits on which longline or gillnet gear is used. Workshop Dates, Times, and Locations 1. April 4, 2025, 9 a.m.-2 p.m., Hilton Garden Inn, 300 Wingo Way, Mount Pleasant, SC 29464. 2. May 5, 2025, 9 a.m.-2 p.m., Hilton Garden Inn, 1297 Miracle Strip Parkway SE, Fort Walton Beach, FL 32448. 3. June 18, 2025, 9 a.m.-2 p.m., Hilton Garden Inn, 3485 Veterans Memorial Highway, Ronkonkoma, NY 11779. Registration To register for a scheduled Safe Handling, Release, and Identification Workshop, please contact Angler Conservation Education at 386-682-0158. Pre-registration is highly recommended, but not required. Registration Materials To ensure that workshop certificates are linked to the correct permits, participants will need to bring the following specific items with them to the workshop: Individual vessel owners must bring a copy of the appropriate swordfish and/or shark permit(s), a copy of the vessel registration or documentation, and proof of identification; Representatives of a business-owned or co-owned vessel must bring proof that the individual is an agent of the business (such as articles of incorporation), a copy of the applicable swordfish and/ or shark permit(s), and proof of identification; and Vessel operators must bring proof of identification. Workshop Objectives The Safe Handling, Release, and Identification Workshops are designed to teach the owner and operator of a vessel that fishes with longline or gillnet gear the required techniques for the safe handling and release of entangled and/or hooked protected species, such as sea turtles, marine mammals, smalltooth sawfish, Atlantic sturgeon, and prohibited sharks. In an effort to improve reporting, the proper identification of protected species and prohibited sharks will also be taught at these workshops. Additionally, individuals attending these workshops will gain a better understanding of the requirements for participating in these fisheries. The overall goal of these workshops is to provide participants with the skills needed to reduce the mortality of protected species and prohibited sharks, which may prevent additional regulations on these fisheries in the future. Online Recertification Workshops NMFS implemented an online option for shark dealers and owners and operators of vessels that fish with longline and gillnet gear to renew their certificates in December 2021. To be eligible for online recertification workshops, dealers and vessel owners and operators need to have previously attended an in-person workshop. Information about the courses is available online at https://www.fisheries.noaa.gov/atlantic-highly-migratory-species/atlantic-shark-identification-workshops and https://www.fisheries.noaa.gov/atlantic-highly-migratory-species/safe-handling-release-and-identification-workshops. To access the course please visit: https://hmsworkshop.fisheries.noaa.gov/start. Authority: 16 U.S.C. 1801 et seq. Dated: March 7, 2025. Karen H. Abrams, Acting Director, Office of Sustainable Fisheries, National Marine Fisheries Service. [FR Doc. 2025-04027 Filed 3-12-25; 8:45 am] BILLING CODE 3510-22-P