[Federal Register Volume 89, Number 243 (Wednesday, December 18, 2024)]
[Notices]
[Pages 102895-102900]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-29934]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2024-0057; FRL-11683-11-OCSPP]
Certain New Chemicals; Receipt and Status Information for
November 2024
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 11/01/
2024 to 11/30/2024.
DATES: Comments identified by the specific case number provided in this
document must be received on or before January 17, 2025.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2024-0057, through the Federal eRulemaking
Portal at https://www.regulations.gov. Follow the online instructions
for submitting comments. Do not submit electronically any information
you consider to be Confidential Business Information (CBI) or other
information whose disclosure is restricted by statute. Additional
instructions on commenting and visiting the docket, along with more
information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Project Management
and Operations Division (MC 7407M), Office of Pollution Prevention and
Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW,
Washington, DC 20460-0001; telephone number: (202) 564-8593; email
address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
[[Page 102896]]
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 11/01/2024 to 11/30/2024. The Agency is providing notice of
receipt of PMNs, SNUNs, and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et
seq., a chemical substance may be either an ``existing'' chemical
substance or a ``new'' chemical substance. Any chemical substance that
is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory)
is classified as a ``new chemical substance,'' while a chemical
substance that is listed on the TSCA Inventory is classified as an
``existing chemical substance.'' (See TSCA section 3(11).) For more
information about the TSCA Inventory please go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN, or SNUN, as
appropriate, before initiating the activity. EPA will review the
notice, make a risk determination on the chemical substance or
significant new use, and take appropriate action as described in TSCA
section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/chemicals-under-tsca.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/commenting-epa-dockets.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (see the Federal
Register of May 12, 1995 (60 FR 25798) (FRL-4942-7)). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review, and
particularly the final determination of such cases, has increased. In
an effort to be responsive to the regulated community, the users of
this information, and the general public, to comply with the
requirements of TSCA, to conserve EPA resources and to streamline the
process and make it more timely, EPA is providing information on its
website about cases reviewed under the amended TSCA, including the
section 5 PMN/SNUN/MCAN and exemption notices received, the date of
receipt, the final EPA determination on the notice, and the effective
date of EPA's determination for PMN/SNUN/MCAN notices on its website
at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is
updated on a weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions
[[Page 102897]]
which are amendments to previous submissions will have a case number
followed by the letter ``A'' (e.g. P-18-1234A). The version column
designates submissions in sequence as ``1'', ``2'', ``3'', etc. Note
that in some cases, an initial submission is not numbered as version 1;
this is because earlier version(s) were rejected as incomplete or
invalid submissions. Note also that future versions of the following
tables may adjust slightly as the Agency works to automate population
of the data in the tables.
Table I--PMN/SNUN/MCANs Approved* From 11/01/2024 to 11/30/2024
----------------------------------------------------------------------------------------------------------------
Received
Case No. Version date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
J-25-0001..................... 1 11/13/2024 CBI............. (G) Ethanol (G) Biofuel producing
production. Saccharomyces
cerevisiae modified,
genetically stable.
P-21-0007A.................... 3 11/06/2024 CBI............. (G) Catalyst.... (G) Reaction products
of Aluminoxanes, Me,
Me group-terminated
and
(alkylcycloalkylene)
dialkylzirconium.
P-21-0008A.................... 3 11/06/2024 CBI............. (G) Catalyst.... (G) Reaction products
of Aluminoxanes, Me,
Me group-terminated
and cycloalkylene
dialkyl tetrahydro
indenyl zirconium.
P-22-0158A.................... 5 11/19/2024 Aqdot........... (G) Additive (S) 1H,4H,14H,17H-
used in 2,16:3,15-Dimethano-
consumer, 5H,6H,7H,8H,9H,10H,1
commercial, and 1H,12H,
industrial 13H,18H,19H,20H,21H,2
applications. 2H,23H,24H,25H,26H-2
,3,4a,5a,6a,7a,8a,9a
,10a,
11a,12a,13a,15,16,17a
,18a,19a,20a,21a,22a
,23a,24a,25a,26a-
tetracosaazabispental
eno[1''',6''':5'',6'
',7''
]cycloocta[1'',2'',3'
':3',4']pentaleno[1'
,6':5,6,7]cycloocta[
1,
2,3-gh:1',2',3'-
g'h']cycloocta[1,2,3-
cd:5,6,7-
c'd']dipentalene-
1,4,6,8,10,12,
14,17,19,21,23,25-
dodecone,
dodecahydro-,
stereoisomer;2,18:3,
17-Dimethano-
2,3,4a,5a,6a,7a,8a,9a
,10a,11a,12a,13a,14a
,15a,17,18,19a,20a,2
1a,22a,23a,
24a,25a,26a,27a,28a,2
9a,30aoctacosaazabis
pentaleno[1''''',
6''''':5'''',6'''',7'
''']
cycloocta[1'''',2''''
,3'''':3'''
,4''']pentaleno[1''',
6''':5'',6'',7'']
cycloocta[1'',2'',3''
:3',4']pentaleno[1',
6':5,6,7]cycloocta
[1,2,3-cd:1',2',3'-
gh]pentalene-
1,4,6,8,10,12,14,16,
19,21,23,25,27,29-
tetradecone,
tetradecahydro-,
stereoisomer;2,20:3,
19-Dimethano-
2,3,4a,5a,
6a,7a,8a,9a,10a,11a,1
2a,13a,14a,15a,16a,1
7a,19,20,21a,22a,23a
,24a,25a,26a,
27a,28a,29a,30a,31a,3
2a,33a,34adotriacont
aazabispentaleno[1''
''',
6''''':5'''',6'''',7'
''']cycloocta
[1'''',2'''',3'''':3'
'',4''']pentaleno
[1''',6''':5'',6'',7'
']cycloocta[1'',2'',
3'':3',4']pentaleno[1
',6':5,6,7]cycloocta
[1,2,3-gh:1',2',3'-
g'h']
cycloocta[1,2,3-
cd:5,6,7-
c'd']dipentalene-
1,4,6,8,10,12,14,16,
18,21,23,25
,27,29,31,33-
hexadecone,
hexadecahydro-,
stereoisomer.
P-23-0141A.................... 2 11/21/2024 Hach Company.... (G) Buffer (S) 2-Butenedioic
solution for acid (2Z)-,
free chlorine potassium salt
determination. (1:?).
P-24-0046A.................... 2 11/20/2024 The Euclid (S) Grinding aid (G) Alkanol,
Chemical used in cement alkoxyalkyl imino,
Company. manufacture. salt.
P-24-0047A.................... 2 11/20/2024 The Euclid (S) Grinding aid (G) Alkanol, nitrilo,
Chemical used in cement salt.
Company. manufacture.
P-24-0116A.................... 4 11/20/2024 CBI............. (G) For use in (G) Phenol, 4,4-(1-
coatings for alkylidene) bis-,
metal parts. polymer with 2-
(chloromethyl)
oxirane, 4-
alkylphenyl ether,
reaction products
with alkylpolyamine
and 2-
(alkylamino)alkanol,
hydrolyzed,
alkanesulfonates
(salts).
P-24-0117A.................... 4 11/20/2024 CBI............. (G) For use in (G) Alkanoic acid,
coatings for compds. with
metal parts. hydrolyzed bisphenol-
epichlorohydrin
polymer 4-
alkylphenyl ether-
alkylpolyamine and 2-
(alkylamino)alkanol
reaction products.
P-24-0118A.................... 4 11/20/2024 CBI............. (G) For use in (G) Alkanoic acid,
coatings for compds. with
metal parts. [(aminoalkyl)imino]
bis[alkanol]-
bisphenol-
epichlorohydrin
polymer 4-
alkylphenyl ether--2-
(alkylamino)alkanol
reaction products.
P-24-0119A.................... 4 11/20/2024 CBI............. (G) For use in (G) Amidosulfonic
coatings for acid, compds. With
metal parts. [(aminoalkyl)imino]
bis[alkanol]-
bisphenol-
epichlorohydrin
polymer 4-
alkylphenyl ether--2-
(alkylamino)alkanol
reaction products.
[[Page 102898]]
P-24-0120A.................... 4 11/20/2024 CBI............. (G) For use in (G) Alkanoic acid,
coatings for compds. with
metal parts. hydrolyzed bisphenol-
monoalkylamine-
epichlorohydrin
polymer 4-
alkylphenyl ether-
alkylpolyamine and 2-
(alkylamino)alkanol
reaction products.
P-24-0121A.................... 4 11/20/2024 CBI............. (G) For use in (G) Phenol, 4,4-(1-
coatings for alkylidene) bis-,
metal parts. polymer with 2-
(chloromethyl)
oxirane and
monoalkanamine, 4-
alkylphenyl ether,
reaction products
with alkylpolyamine
and 2-
(alkylamino)alkanol,
hydrolyzed,
alkanesulfonates
(salts).
P-25-0005A.................... 2 11/20/2024 CBI............. (G) For use in (G) Cashew, nutshell
coatings for liq., polymer with
metal parts. [(aminoalkyl)imino]
bis[alkanol],
bisphenol and
epichlorohydrin,
reaction products
with dialkanolamine,
alkyl carboxylates
(salts)
alkanesulfonates
(salts).
P-25-0006A.................... 2 11/20/2024 CBI............. (G) For use in (G) Phenol, 4,4-(1-
coatings for alkylidene) bis-,
metal parts. polymer with
[(aminoalkyl)imino]
bis[alkanol] and 2-
(chloromethyl)
oxirane, 3-alkyloxy-
2-hydroxypropyl
ethers, reaction
products with
dialkanolamine,
alkyl carboxylates
(salts)
alkanesulfonates
(salts).
P-25-0007A.................... 2 11/20/2024 CBI............. (G) For use in (G) Phenol, 4,4-(1-
coatings for alkylidene) bis-,
metal parts. polymer with
[(aminoalkyl)imino]
bis[alkanol] and 2-
(chloromethyl)
oxirane, 4-
alkylphenyl ethers,
reaction products
with dialkanolamine,
alkyl carboxylates
(salts)
alkanesulfonates
(salts).
P-25-0008A.................... 2 11/20/2024 CBI............. (G) For use in (G) Benzenediol,
coatings for polymer with
metal parts. [(aminoalkyl)imino]
bis[alkanol], 2-
(chloromethyl)oxiran
e and 4,4-(1-
alkylidene)
bis[phenol], 4-
alkylphenyl ethers,
reaction products
with dialkanolamine,
alkyl carboxylates
(salts)
alkanesulfonates
(salts).
P-25-0009A.................... 2 11/20/2024 CBI............. (G) For use in (G) Cashew, nutshell
coatings for liq., polymer with
metal parts. [(aminoalkyl)imino]
bis[alkanol],
bisphenol,
epichlorohydrin and
benzenediol,
reaction products
with dialkanolamine,
alkyl carboxylates
(salts)
alkanesulfonates
(salts).
P-25-0010A.................... 2 11/20/2024 CBI............. (G) For use in (G) Benzenediol,
coatings for polymer with
metal parts. [(aminoalkyl)imino]
bis[alkanol], 2-
(chloromethyl)oxiran
e and 4,4-(1-
alkylidene)
bis[phenol], 3-
alkyloxy-2-
hydroxypropyl
ethers, reaction
products with
dialkanolamine,
alkyl carboxylates
(salts)
alkanesulfonates
(salts).
P-25-0011A.................... 3 11/01/2024 CBI............. G (Surface (G) Phosphonic acid,
Modifier). P- [polyfluoro-
oxygen-substituted-
poly(trifluoromethyl
)-heteroatom-
substituted-alkan-1-
yl]-.
P-25-0011A.................... 4 11/20/2024 CBI............. (G) Surface (G) Phosphonic acid,
Modifier. P- [polyfluoro-
oxygen-substituted-
poly(trifluoromethyl
)-heteroatom-
substituted-alkan-1-
yl]-.
P-25-0015..................... 1 11/12/2024 CBI............. (G) Additive in (G) Modified tall oil
paving fatty acid polyamine
applications. condensate.
P-25-0016..................... 1 11/15/2024 CBI............. (G) Photoacid (G) Tri haloaromatic
generator use iodonium dicyclo
at customer salt with
sites. polyhaloalkyl
carbomonocycle
hetero acid.
P-25-0017..................... 2 11/26/2024 US Polymers (S) Binder for (G) Reaction product
Accurez, LLC. Thermoplastic of aromatic acid
Coatings; with trifunctional
Binder for Ink/ polyol and
Adhesive. pelargonic acid.
P-25-0020..................... 1 11/21/2024 CBI............. (G) Contained (G) Sulfonium,
use for triphenyl-, salt
microlithograph with
y for heterosubstituteddif
electronic luorosubstitutedalky
device l substitutedalkyl
manufacturing. trihalosubstitutedca
rbomonocycle
carboxylate (1:1).
P-25-0021..................... 1 11/22/2024 CBI............. (G) Contained (G) Sulfonium, tri
use for (halosubstituted
microlithograph henyl)-, salt with
y for heterosubstituteddif
electronic luorosubstitutedalky
device l substitutedalkyl
manufacturing. trihalosubstitutedca
rbomonocycle
carboxylate (1:1).
SN-23-0024A................... 2 11/21/2024 CBI............. (G) Component in (S) Phosphoric acid,
batteries. iron (2+) lithium
salt (1:1:1).
SN-25-0002.................... 1 11/20/2024 CBI............. (G) Additive (S) Cesium tungsten
used in plastic oxide.
panels.
SN-25-0003.................... 1 11/25/2024 CBI............. (S) Cathode (S) Phosphoric acid,
Active Material iron (2+) lithium
in Batteries. salt (1:1:1).
----------------------------------------------------------------------------------------------------------------
In Table II. of this unit, EPA provides the following information
(to the extent that such information is not subject to a CBI claim) on
the TMEs and/or Biotech Exemptions received by EPA during this period:
The EPA case number assigned to the TME and/or Biotech Exemption, the
submission document type (initial or amended), the version number, the
date the TME and/or Biotech Exemption was received by EPA, the
submitting manufacturer (i.e., domestic producer or importer), the
potential uses identified by the manufacturer in the TME and/or Biotech
Exemption, and the chemical substance identity.
[[Page 102899]]
Table II--TMEs and Biotech Exemptions Received From 11/01/2024 to 11/30/2024
--------------------------------------------------------------------------------------------------------------------------------------------------------
Case No. Submission type Version Received date Manufacturer Use Chemical substance
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-24-0001A....................... Test Marketing 4 11/18/2024 Zschimmer & Schwarz. (S) Raw material in (G) Isomerized
Exemption ester alkane derivs.
Application manufacturing, to
(TMEA)Test be fully consumed.
Marketing Exemption
Application (TMEA).
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table III--NOCs Approved* From 11/01/2024 to 11/30/2024
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type
Case No. Received date date of amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
J-20-0013....................... 11/08/2024 12/21/2023 N.................. (G) Strain of
Escherichia coli
modified with
genetically stable,
plasmid-borne DNA to
produce enzymes.
J-20-0014....................... 11/13/2024 12/21/2023 N.................. (G) Strains of
Escherichia coli
modified with
genetically stable,
plasmid-borne DNA to
produce enzymes.
J-20-0015....................... 11/13/2024 12/21/2023 N.................. (G) Strain of
Escherichia coli
modified with
genetically stable,
plasmid-borne DNA to
produce enzymes.
J-20-0016....................... 11/13/2024 12/21/2023 N.................. (G) Strain of
Escherichia coli
modified with
genetically stable,
plasmid-borne DNA to
produce enzymes.
J-20-0017....................... 11/13/2024 12/21/2023 N.................. (G) Strain of
Escherichia coli
modified with
genetically stable,
plasmid-borne DNA to
produce enzymes.
J-20-0018....................... 11/13/2024 12/21/2023 N.................. (G) Strain of
Escherichia coli
modified with
genetically stable,
plasmid-borne DNA to
produce enzymes.
J-21-0019....................... 11/13/2024 12/21/2023 N.................. (G) Strain of
Escherichia coli
modified with
genetically stable,
plasmid-borne DNA to
produce plasmid-borne
DNA.
P-13-0143....................... 11/15/2024 03/10/2013 N.................. (G) Polyalkylene acid,
alkanol amine
derivative.
P-15-0680A...................... 11/19/2024 05/14/2018 N.................. (S) 2-propenoic acid,
butylester, polymer
with 1,3-
cyclohexanedimethanami
ne, reaction products
with Bu glycidyl
ether.
P-18-0226A...................... 11/01/2024 03/04/2024 N.................. (G)
Trialkylammonioethyl
fatty-alkylate, alkyl
sulfate.
P-20-0156....................... 11/11/2024 10/16/2024 N.................. (G) Substituted,
triaryl-, Tri
cycloalkane alkyl
disubstituted.
P-21-0055A...................... 11/25/2024 07/07/2022 Amended generic (G) Fatty acids,
chemical name. reaction products with
dialkenyltriamine-
aromatic dicarboxylic
acid polymer and
polycyclic acids.
P-21-0066....................... 11/12/2024 10/23/2024 N.................. (G) 1,2-Alkanediol, 3-
aryloxy, mono
phosphate ester.
P-22-0154....................... 11/19/2024 11/15/2024 N.................. (S) 2-tridecenoic acid,
2-acetyl-4-methyl-,
ethyl ester.
P-22-0175A...................... 11/26/2024 05/22/2024 Relinquished (S) Silsesquioxanes, Me
chemical identity vinyl, hydroxy and
confidentiality methoxy and
claim. [(trimethylsilyl)oxy]-
terminated.
P-23-0069....................... 11/01/2024 10/21/2024 N.................. (S) Oils, Pisum
sativum, polymers with
1, 6-
diisocyanatohexane,
1,5 diisocyanato
pentane, glycerol, and
maltodextrin.
P-23-0101....................... 11/19/2024 10/31/2024 N.................. (G) Glycerides from
fermentation of
genetically modified
microorganism,
epoxidized.
P-23-0103....................... 11/19/2024 10/31/2024 N.................. (G) Glycerides from
fermentation of
genetically modified
microorganism,
epoxidized, reaction
products with ethanol.
P-23-0152....................... 11/11/2024 10/17/2024 N.................. (G) 1-Alkanethiol, 3-
(trialkoxysilyl)-
hydrolysis products
with silica, oxidized.
P-23-0174....................... 11/15/2024 11/07/2024 N.................. (G) Mixed metal oxide.
P-23-0188....................... 11/25/2024 11/15/2024 N.................. (G) Alkenoic acid, 3-
methyl-, 1,1-dimethyl-
2-propen-1-yl ester.
P-24-0088....................... 11/04/2024 10/07/2024 N.................. (G) Mixed metal oxide.
----------------------------------------------------------------------------------------------------------------
In Table IV of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table IV--Test Information Received From 11/01/2024 to 11/30/2024
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
P-16-0543............................. 11/19/2024 Exposure Monitoring Report.... (G) Halogenophosphoric
acid metal salt.
P-22-0056............................. 11/09/2024 In Vitro Percutaneous (S) Tin, dioctylbis (2,4-
Absorption of Tin in a pentanedionato-. kappa.
Sealant Formulation Through O2,. kappa. O4)-.
Human Skin; In Vitro
Percutaneous Absorption of
Radiolabeled TIB KAT 223 in
Sealant Formulation Through
Human Split-Thickness Skin;
Supplementary risk assessment
for industrial handling of
TIB KAT 223 and consumer use
of sealants formulated with
TIB KAT 223; initial review
engineering report; CEM
Inhalation and Dermal
Exposure Estimates.
----------------------------------------------------------------------------------------------------------------
[[Page 102900]]
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: December 12, 2024.
Pamela Myrick,
Director, Project Management and Operations Division, Office of
Pollution Prevention and Toxics.
[FR Doc. 2024-29934 Filed 12-17-24; 8:45 am]
BILLING CODE 6560-50-P