[Federal Register Volume 89, Number 139 (Friday, July 19, 2024)]
[Proposed Rules]
[Pages 58698-58702]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-15654]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

National Oceanic and Atmospheric Administration

50 CFR Part 300

[Docket No 240703-0185]
RIN 0648-BM70


International Fisheries; Pacific Tuna Fisheries; Fish Aggregating 
Device Design and Reporting Requirements in the Eastern Pacific Ocean

AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and 
Atmospheric Administration (NOAA), Commerce.

ACTION: Proposed rule; request for comments.

-----------------------------------------------------------------------

SUMMARY: NMFS proposes regulations under the Tuna Conventions Act of 
1950 (TCA), as amended, to implement two resolutions adopted at the 
101st meeting of the Inter-American Tropical Tuna Commission (IATTC) in 
August 2023. These resolutions include Resolution C-23-03 (``Amendment 
to Resolution C-99-07 on Fish Aggregating Devices'') and Resolution C-
23-04 (``On the Design and Biodegradability of Drifting Fish 
Aggregating Devices (DFADs) in the IATTC Area of Competence''). The 
proposed rule would modify regulations for the design of fish 
aggregating devices (FADs) in the eastern Pacific Ocean (EPO) to 
require non-entangling and biodegradable materials. Furthermore, the 
proposed rule would require that data related to the recovery of FADs 
for the purpose of final disposal or recycling in the EPO be collected 
by vessel owners and operators, and submitted to the IATTC, unless that 
information is already collected and submitted to the IATTC by an 
observer.

DATES: Comments on the proposed rule and supporting documents must be 
submitted in writing by August 19, 2024.

ADDRESSES: A plain language summary of this proposed rule is available 
at https://www.regulations.gov/docket/NOAA-NMFS-2023-0147. You may 
submit comments on this document, identified by NOAA-NMFS-2023-0147, by 
any of the following methods:
     Electronic Submission: Submit all electronic public 
comments via the Federal e-Rulemaking Portal. Visit https://www.regulations.gov and enter ``NOAA-NMFS-2023-0147'' in the Search 
box. Click on the ``Comment'' icon, complete the required fields, and 
enter or attach your comments.
     Mail: Submit written comments to Tyler Lawson, NMFS West 
Coast Region Portland Office, 1201 NE Lloyd Blvd., Suite 1100, 
Portland, OR 97232. Include the identifier ``NOAA-NMFS-2023-0147'' in 
the comments.
    Instructions: Comments sent by any other method, to any other 
address or individual, or received after the end of the comment period, 
may not be considered by NMFS. All comments received are a part of the 
public record and will generally be posted for public viewing on 
https://www.regulations.gov without change. All personal identifying 
information (e.g., name, address, etc.), confidential business 
information, or otherwise sensitive information submitted voluntarily 
by the sender will be publicly accessible. NMFS will accept anonymous 
comments (enter ``N/A'' in the required fields if you wish to remain 
anonymous).
    Copies of supporting documents that were prepared for this proposed 
rule, including the regulatory impact review are available via the 
Federal e-Rulemaking Portal: https://www.regulations.gov, docket NOAA-
NMFS-2023-0147, or by contacting Tyler Lawson (see address above, and 
other contact information in FOR FURTHER INFORMATION CONTACT).
    Send comments on aspects of the collection of information to Tyler 
Lawson (address above), by email to [email protected], or by 
fax to (202) 395-5806.

FOR FURTHER INFORMATION CONTACT: Tyler Lawson, NMFS West Coast Region, 
(503) 230-5421, [email protected].

SUPPLEMENTARY INFORMATION:

Background on the IATTC

    The United States is a member of the IATTC, which was established 
under the 1949 Convention for the Establishment of an Inter-American 
Tropical Tuna Commission (1949 Convention). In 2003, the IATTC updated 
the 1949 Convention through the adoption of the Convention for the 
Strengthening of the IATTC Established by the 1949 Convention between 
the United States of America and the Republic of Costa Rica (Antigua 
Convention). The Antigua Convention entered into force in 2010. The 
United States acceded to the Antigua

[[Page 58699]]

Convention on February 24, 2016. The full text of the Antigua 
Convention is available at: https://www.iattc.org/PDFFiles2/Antigua_Convention_Jun_2003.pdf.
    The IATTC consists of 21 member nations and 5 cooperating non-
member nations. The IATTC facilitates scientific research, as well as 
the conservation and management, of tuna and tuna-like species in the 
IATTC Convention Area. The IATTC Convention Area is defined as waters 
of the EPO within the area bounded by the west coast of the Americas 
and by 50[deg] N latitude, 150[deg] W longitude, and 50[deg] S 
latitude. The IATTC maintains a scientific research and fishery 
monitoring program and regularly assesses the status of tuna, sharks, 
and billfish stocks in the IATTC Convention Area to determine 
appropriate catch limits and other measures deemed necessary to promote 
sustainable fisheries and prevent the overexploitation of these stocks.

International Obligations of the United States Under the Antigua 
Convention

    As a party to the Antigua Convention and a member of the IATTC, the 
United States is legally bound to implement decisions of the IATTC 
under the TCA, as amended (16 U.S.C. 951 et seq.). The TCA directs the 
Secretary of Commerce, in consultation with the Secretary of State and, 
with respect to enforcement measures, the U.S. Coast Guard, to 
promulgate such regulations as may be necessary to carry out the United 
States' obligations under the Antigua Convention, including 
recommendations and decisions adopted by the IATTC. The authority of 
the Secretary of Commerce to promulgate such regulations has been 
delegated to NMFS.

IATTC Resolutions on Fish Aggregating Devices

    The 101st Meeting of the IATTC was held in Victoria, Canada, in 
August 2023. At this meeting, the IATTC adopted Resolutions C-23-03 and 
C-23-04.
    Resolution C-23-03 amends Resolution C-99-07 and continues to 
recommend that tender vessels remain prohibited, while clarifying that 
vessels may engage in FAD recovery activities that are limited to the 
collection of FADs for final disposal, but not for maintenance or 
adjustment. If FADs are recovered for final disposal or recycling, the 
resolution requires that all associated information on FAD recovery 
activities be reported to the IATTC Secretariat. The resolution 
encourages the initiation of recovery programs for FADs through 
cooperative initiatives among fishing vessels and other vessels 
implementing recovery projects in the IATTC Convention Area.
    Resolution C-23-04 contains new measures regarding materials that 
can be used in FADs that are deployed or redeployed in the IATTC 
Convention Area. These include biodegradable and non-entangling 
materials which would be phased in between 2025 and 2029. Beginning on 
January 1, 2025, purse seine vessel owners and operators are required 
to meet non-entangling design requirements for FADs and the use of mesh 
nets will be prohibited for any part of a FAD. Resolution C-23-04 
defines ``non-entangling FAD'' as ``a FAD that does not include any 
netting materials for any part of the FAD including both the surface 
structure (e.g., raft) and subsurface structure (e.g., tail).'' 
Beginning on January 1, 2026, purse seine vessel owners and operators 
are required to begin using biodegradable materials in either the 
surface or subsurface portion of FADs. By January 1, 2029, both the 
surface and subsurface portion of the FAD must be composed of 
biodegradable materials. Resolution C-23-04 defines ``biodegradable'' 
as ``non-synthetic materials and/or bio- based alternatives that are 
consistent with international standards for materials that are 
biodegradable in marine environments. The components resulting from the 
degradation of these materials should not be damaging to the marine and 
coastal ecosystems or include heavy metals or plastics in their 
composition.''

Proposed Regulations for Fish Aggregating Devices

    This proposed rule would be implemented under the TCA (16 U.S.C. 
951 et seq.) and proposes changes to part 300, subpart C of title 50 of 
the Code of Federal Regulations (CFR). This proposed rule would 
implement provisions in Resolutions C-23-03 and C-23-04 that would: (1) 
clarify that vessels may engage in the recovery of FADs for final 
disposal or recycling and implement reporting requirements for 
recovered FADs, while continuing to prohibit tender vessels; (2) 
specify requirements for non-entangling FADs starting on January 1, 
2025; and (3) specify requirements to phase in biodegradable FAD 
components starting on January 1, 2026.

Recovery of FADs for Final Disposal or Recycling

    The proposed rule would implement the provisions of Resolution C-
23-03 by clarifying what are considered allowable FAD recovery 
activities by vessels and by implementing disposal and reporting 
requirements for recovered FADs in the IATTC Convention Area. 
Cooperative initiatives and recovery projects are encouraged in the 
resolution; however, they are not intended to be the focus of the 
proposed rule or to be a formal NMFS program. Rather, the proposed rule 
is meant to clarify that vessels may volunteer to engage in recovery 
activities and to describe the permissible parameters of such 
activities. While tender vessels \1\ are still prohibited in the IATTC 
Convention Area (see 50 CFR 300.24(c) and 50 CFR 300.25(b)), the 
proposed rule would clarify that U.S. vessel owners and operators may 
recover FADs, provided the recovery activities are limited to 
collecting FADs for final disposal or recycling in port and do not 
include any type of maintenance, adjustment, or deployment.
---------------------------------------------------------------------------

    \1\ A tender vessel is ``a vessel that does not engage in purse 
seine fishing but tends to FADs in support of tuna fishing 
operations'' (50 CFR 300.21).
---------------------------------------------------------------------------

    Tuna purse seine vessels that recover FADs are still allowed to 
deploy and maintain FADs when engaged in normal fishing operations, but 
other vessels engaged in FAD recovery are prohibited from deploying or 
maintaining FADs. Purse seine vessels that interact with FADs must 
continue to comply with the requirements in 50 CFR 300.22 (c)(1).
    The proposed rule would also implement a reporting requirement for 
information associated with all FADs recovered by vessel owners and 
operators in the IATTC Convention Area, unless that information is 
already reported by an observer. These data would be reported to the 
IATTC scientific staff for analysis using a format and address provided 
by NMFS. Because this information is already collected and reported to 
the IATTC by observers, if a vessel has an observer onboard, FAD 
recovery data would not need to be separately collected and reported by 
the vessel owners and operators.

FAD Design Requirements

    The proposed rule would also implement the provisions of Resolution 
C-23-04 by amending regulations at 50 CFR 300.28 to require non-
entangling and biodegradable materials. Since January 1, 2019, the 
IATTC and the United States have required ``less entangling'' FAD 
designs which allow a raft with mesh netting, if that mesh size is less 
than 7 centimeters and tightly wrapped such that no netting hangs below 
the FAD when deployed (see 50 CFR 300.28(g)(1)). Additionally, existing 
regulations stipulate that any netting used in the subsurface structure 
of the

[[Page 58700]]

FAD must be tightly tied into bundles (i.e., sausages) or have 
stretched mesh size less than 7 centimeters in a panel that is weighted 
on the lower end with at least enough weight to keep the netting taut 
in the water column (see 50 CFR 300.28(g)(2)).
    The proposed rule would amend the existing regulations on FAD 
design to prohibit the use of mesh net from any part of the FAD and 
require all materials to be non-entangling beginning on January 1, 
2025. A definition of ``non-entangling FAD,'' consistent with the 
definition adopted by the IATTC, would be included at 50 CFR 300.21 as 
follows: ``Non-entangling FAD means a FAD that does not include any 
netting materials for any part of the FAD including both the surface 
structure (e.g., raft) and subsurface structure (e.g., tail).''
    Additionally, beginning on January 1, 2026, the proposed rule would 
implement a phased approach requiring FADs to be made out of 
biodegradable materials. As discussed in more detail in the next 
paragraphs, purse seine vessel owners and operators would be required 
to begin using biodegradable materials in either the surface or 
subsurface portion of FADs beginning on January 1, 2026, and would be 
required to use biodegradable materials in both the surface and 
subsurface portion of the FAD beginning on January 1, 2029. A 
definition of ``biodegradable,'' consistent with the definition adopted 
by the IATTC, would be included at 50 CFR 300.21 as follows:

    Biodegradable means non-synthetic materials and/or bio-based 
alternatives that are consistent with approved international 
standards for materials that are biodegradable in marine 
environments. The components resulting from the degradation of these 
materials should not be damaging to the marine and coastal 
ecosystems or include heavy metals or plastics in their composition. 
Examples of non-synthetic biodegradable materials include plant-
based materials such as cotton, jute, manila hemp (abaca), bamboo, 
and natural rubber; and animal-based materials such as leather, 
wool, and lard. The approved international standards are ASTM D6691, 
ASTM D7881, and TUV Austria.

    NMFS seeks comments on additional materials that could be 
authorized as biodegradable. In the future, if the members of the IATTC 
approve other standards, NMFS will revise the definition accordingly to 
include them.
    By January 1, 2026, the proposed rule would require all FADs 
deployed or redeployed in the IATTC Convention Area to be designed and 
constructed according to one of three sets of specifications. Under 
option one, the surface part of the FAD must be made of fully 
biodegradable materials, except for flotation components, but the 
subsurface part may contain non-biodegradable materials (e.g., 
synthetic raffia, metallic frame, plastic floats, nylon ropes). Under 
option two, the subsurface part of the FAD must be made of fully 
biodegradable materials, but the surface part and any flotation 
components may be made of non-biodegradable materials. Under option 
three, the surface part, except for flotation components, and 
subsurface part must both be made of fully biodegradable materials. All 
three options would allow for plastic-based flotation components (e.g., 
plastic buoys, foam, purse-seine corks). The third option would allow 
an exception for satellite buoys that are attached to FADs to track 
them and for nylon ropes, which can be used exclusively to strengthen 
the structure of the floating or underwater component of the FAD.
    By January 1, 2029, the proposed rule would require all FADs 
deployed or redeployed in the IATTC Convention Area to be designed and 
constructed such that the surface part and subsurface part are both 
made of fully biodegradable materials, except that any flotation 
component on the surface part may still be made of non-biodegradable 
materials. The exceptions for satellite buoys and nylon ropes discussed 
in the previous paragraph would continue to apply.

Classification

    The NMFS Assistant Administrator has determined that this proposed 
rule is consistent with the TCA and other applicable laws, subject to 
further consideration after public comment.

Executive Order 12866

    This proposed rule has been determined to be not significant for 
purposes of Executive Order 12866.

Paperwork Reduction Act

    This proposed rule contains changes to the collection of 
information requirement for the purposes of the Paperwork Reduction Act 
of 1995 (PRA). NMFS is amending the supporting statement for the ``West 
Coast Region Pacific Tuna Fisheries Logbook, Fish Aggregating Device 
Form, and Observer Safety Reporting,'' Office of Management and 
Business (OMB) PRA requirements (OMB Control No. 0648-0148) to include 
the data collection requirements for U.S. vessel owners and operators 
to report information on recovered FADs to the IATTC if that 
information is not already collected and submitted to the IATTC by an 
observer onboard the vessel. Current FAD reporting requirements under 
that collection of information would continue to apply.
    NMFS estimates that the public reporting burden for the collection 
of information for recovered FADs will average 5 minutes per form, 
including time for reviewing instructions, searching existing data 
sources, gathering and maintaining the data needed, and completing and 
reviewing the collection of information.
    Under existing regulations at 50 CFR 300.22(c), vessel owners and 
operators that do not have an observer onboard are required to report 
detailed information on any interaction or activity with a deployed 
FAD, including information about the design of the FAD. NMFS estimates 
that the public reporting burden for this existing collection of 
information for FAD design will not change if the proposed changes to 
FAD design requirements are implemented.
    NMFS is requesting public comment on the addition of the FAD 
recovery program data collection to the PRA package, including whether 
the paperwork would unnecessarily burden any vessel owners and 
operators. Public comment is sought regarding: (1) whether this 
proposed collection of information is necessary for the proper 
performance of the functions of the agency, including whether the 
information shall have practical utility; (2) the accuracy of the 
burden estimate; (3) ways to enhance the quality, utility, and clarity 
of the information to be collected; and, (4) ways to minimize the 
burden of the collection of information, including through the use of 
automated collection techniques or other forms of information 
technology. See ADDRESSES section above for information on where to 
send comments on these or any other aspects of the collection of 
information.
    Notwithstanding any other provision of the law, no person is 
required to respond to, and no person shall be subject to penalty for 
failure to comply with, a collection of information subject to the 
requirements of the PRA, unless that collection of information displays 
a currently valid OMB control number. All currently approved NOAA 
collections of information may be viewed at: https://www.reginfo.gov/public/do/PRAMain.

Regulatory Flexibility Act

    Pursuant to the Regulatory Flexibility Act (RFA) (5 U.S.C. 605(b)), 
the Chief Counsel for Regulation of the Department of Commerce 
certified to the Chief Counsel for Advocacy of the Small Business 
Administration (SBA) that this proposed rule, if adopted, would not 
have a significant economic

[[Page 58701]]

impact on a substantial number of small entities. The rationale for the 
certification is provided in the following paragraphs.
    The U.S. SBA defines a ``small business'' (or ``small entity'') as 
one with annual revenue that meets or is below an established size 
standard. For RFA purposes only, NMFS has established a small business 
size standard of $11 million in annual gross receipts for businesses, 
including their affiliates, whose primary industry is commercial 
fishing (see 50 CFR 200.2). This standard applies to all businesses 
classified under North American Industry Classification System (NAICS) 
code 11411 for commercial fishing, including all businesses classified 
as commercial finfish fishing (NAICS 114111), commercial shellfish 
fishing (NAICS 114112), and other commercial marine fishing (NAICS 
114119) businesses.
    NMFS prepared analyses for this regulatory action in light of this 
size standard. All of the entities directly regulated by this 
regulatory action are commercial finfish fishing businesses. Under this 
size standard, some U.S. purse seine vessels affected by this action 
are considered large, and some are small businesses. Non-fishing 
vessels may also engage in these voluntary FAD recovery activities. 
NMFS is aware of one non-governmental organization engaging in this 
activity in the western Pacific Ocean but is not aware of non-fishing 
vessels engaged in this activity in the IATTC Convention Area. Given 
the lack of information on these non-fishing vessels, NMFS is unable to 
evaluate if these entities are a small or large business. NMFS plans to 
reevaluate engagement of non-fishing vessels in FAD recovery programs 
in the future if more data become available on these activities.

U.S. Purse Seine Vessels Fishing in the IATTC Convention Area

    There are two components to the U.S. tuna purse seine fishery in 
the EPO: (1) large purse seine vessels (i.e., size class 6; greater 
than 363 metric tons (mt) carrying capacity) that typically are based 
in the western and central Pacific Ocean (WCPO); and (2) coastal purse 
seine vessels with smaller fish hold volumes (i.e., size class 2-3; 
between 46 and 181 mt carrying capacity) that are based out of 
California. The proposed regulations would apply only to vessels that 
recover FADs in the IATTC Convention Area. To date, NMFS is only aware 
of large purse seine vessels being potentially interested in engaging 
in this activity in the EPO.
    As of February 2024, the U.S. has 15 large purse seine vessels (all 
size class 6) registered to fish in the IATTC Convention Area. These 
large purse seine vessels target skipjack tuna by fishing on FADs and 
also fish on unassociated sets of schooling tuna. They also catch and 
retain yellowfin and bigeye tuna.
    Currently, there are 15 active large U.S. purse seine vessels on 
the IATTC Regional Vessel Register authorized to fish in the EPO. 
Thirteen of these vessels also have Western and Central Pacific 
Fisheries Commission (WCPFC) Area Endorsements. WCPFC Area Endorsements 
are NMFS-issued authorizations required for a vessel to fish 
commercially for highly migratory species on the high seas in the WCPFC 
Convention Area as defined at 50 CFR 300.211. NMFS used cannery data 
from the IATTC and Regional Purse Seine Logbook (RPL) data from Pacific 
Islands Fisheries Science Center to estimate fish landings in both the 
EPO and WCPO for the vessels that fished in both the IATTC and WCPFC 
Convention Areas within a year.
    Because neither gross receipts nor ex-vessel price information 
specific to individual fishing vessels are available to NMFS, NMFS 
applied regional price data--as approximations of ex-vessel prices--to 
annual catches of individual vessels obtained from RPLs and IATTC 
observer data, to estimate the vessels' annual receipts.
    Using this approach, NMFS estimates that among the affected 
vessels, the range in average annual per-vessel receipts in 2021-2023 
was $500,000 to $13.4 million with an average of approximately $9.5 
million. Ten of the active purse seine vessels had estimated average 
annual receipts of less than $11 million, and thus are considered to be 
small entities. The remaining five are considered large businesses.

Economic Impacts

    The expected economic effects of the proposed action are discussed 
in detail in the following paragraphs.
    FAD recovery: Resolution C-23-03 encourages the commencement of 
recovery programs for FADs among fishing vessels and other vessels 
implementing recovery projects in the IATTC Convention Area. The 
proposed rule would establish reporting requirements for FAD recoveries 
if they occur. Because it is not mandatory to participate in the 
recovery of a FAD, any potential costs of recovering FADs are optional 
for U.S. vessels. For fishing vessel owners and operators opting to 
take part, the recovery operations could occur on fishing trips and 
would not necessarily need to be a separate trip to recover a FAD. As 
stated previously, non-fishing vessels may also engage in voluntary FAD 
recovery activities, but NMFS does not have enough information on what 
types of vessels may do this to include in this analysis. For vessel 
owners or operators that choose to participate in the recovery of FADs, 
the reporting requirements are similar to existing requirements of 50 
CFR 300.22 (c) and are not expected to reduce the profitability of the 
fishery.
    Non-entangling and biodegradable FAD design: As described earlier 
in this preamble, the use of non-entangling and biodegradable materials 
would be required for FADs deployed or redeployed in the IATTC 
Convention Area beginning on January 1, 2025 and on January 1, 2026, 
respectively.
    Given the differences in the designs and materials used by each 
vessel for FADs, there is variation in costs. The availability of 
supplies can also vary and can have an impact on the cost. Some owners 
and operators of U.S. purse seine vessels have been experimenting with 
non-entangling and biodegradable FAD designs for several years and are 
already familiar with costs and construction of non-entangling and 
biodegradable FADs. During the IATTC's seventh meeting of the ad hoc 
working group on FADs in 2023, the IATTC scientific staff presented 
data on trials of non-entangling and biodegradable FAD prototypes 
paired with traditional FADs. The trials found the average catch rate 
for non-entangling and biodegradable FAD prototypes were comparable to 
traditional FADs, suggesting no substantial change in attracting target 
stocks. Furthermore, the IATTC trials showed that the lifespan (i.e., 
the ``operational'' life) of traditional FADs and non-entangling and 
biodegradable prototypes were similar. At the 2019 IATTC FAD working 
group meeting, the International Seafood Sustainability Foundation 
(ISSF) presented and reported that the range of costs for non-
entangling biodegradable FADs ranged from $180 to $450 depending on the 
design. In comparison, ISSF reported traditional FADs currently being 
used range from $250 to $900. Replacing and redeploying FADs is 
considered routine by large purse seine vessels, regardless of design 
type. NMFS does not expect the transition to the proposed FAD designs 
to reduce profitability of the fishery.
    No disproportionate impacts between small and large businesses are 
expected. The proposed action to impose restrictions on FAD designs is 
not

[[Page 58702]]

expected to change the fishing behavior of the U.S. fleet.
    In summary, the proposed action is not expected to substantially 
change the typical fishing practices of affected vessels. Any impact to 
the income of U.S. vessels is expected to be minor. Therefore, NMFS has 
determined that the action is not expected to have a significant 
economic impact on a substantial number of small entities, or a 
disproportionate economic impact on the small entities relative to the 
large entities. Given these conclusions, an Initial Regulatory 
Flexibility Analysis is not required and none has been prepared.

List of Subjects in 50 CFR Part 300

    Administrative practice and procedure, Fish, Fisheries, Fishing, 
Marine resources, Reporting and recordkeeping requirements, Treaties.

    Dated: July 11, 2024.
Samuel D. Rauch III,
Deputy Assistant Administrator for Regulatory Programs, National Marine 
Fisheries Service.

    For the reasons set out in the preamble, NMFS proposes to amend 50 
CFR part 300 as follows:

PART 300--INTERNATIONAL FISHERIES REGULATIONS

Subpart C--Eastern Pacific Tuna Fisheries

0
1. The authority citation for part 300, subpart C, continues to read as 
follows:

    Authority:  16 U.S.C. 951 et seq.

0
2. Amend Sec.  300.21 by adding definitions, in alphabetical order, for 
``biodegradable'' and ``non-entangling FAD'' to read as follows:


Sec.  300.21  Definitions.

* * * * *
    Biodegradable means non-synthetic materials and/or bio-based 
alternatives that are consistent with approved international standards 
for materials that are biodegradable in marine environments. The 
components resulting from the degradation of these materials should not 
be damaging to the marine and coastal ecosystems or include heavy 
metals or plastics in their composition. Examples of non-synthetic 
materials include plant-based materials such as cotton, jute, Manila 
hemp (abaca), bamboo, and natural rubber; and animal-based materials 
such as leather, wool, and lard. The approved international standards 
are ASTM D6691, ASTM D7881, and TUV Austria.
* * * * *
    Non-entangling FAD means a FAD that does not include any netting 
materials for any part of the FAD including both the surface structure 
(e.g., raft) and subsurface structure (e.g., tail).
* * * * *
0
3. Amend Sec.  300.22 by adding paragraph (c)(5) to read as follows:


Sec.  300.22  Recordkeeping and reporting requirements.

* * * * *
    (c) * * *
    (5) Reporting on recovered FADs. U.S. vessel owners and operators 
must report information on FADs that are recovered for disposal or 
recycling to the IATTC, unless that information is already reported to 
the IATTC by an observer. This information must be reported using a 
format and address provided by the HMS Branch. The owner and operator 
must ensure that the form is submitted within 30 days of each recovery 
to the address specified by the HMS Branch.
* * * * *
0
4. Amend Sec.  300.24 by adding paragraphs (rr) and (ss) to read as 
follows:


Sec.  300.24  Prohibitions.

* * * * *
    (rr) Except for tuna purse seine vessels, when recovering FADs, 
performing maintenance and adjustments on deployed FADs, or deploying a 
FAD.
    (ss) Deploy or redeploy a FAD in the IATTC Convention Area that 
fails to comply with the FAD design requirements in Sec.  300.28(g) and 
(h).
0
5. Amend Sec.  300.28 by revising the introductory text of paragraph 
(f), by adding paragraph (f)(3), by revising paragraph (g), and by 
adding paragraph (h) to read as follows:


Sec.  300.28  FAD restrictions.

* * * * *
    (f) Restrictions on FAD deployments, removals, and recovery.
* * * * *
    (3) U.S. vessel owners and operators may recover FADs for final 
disposal or recycling. Recovery activities must be limited to the 
collection of FADs for final disposal or recycling and may not include 
any type of maintenance or adjustment on deployed FADs.
    (g) Non-entangling FAD materials. Beginning January 1, 2025, U.S. 
purse seine vessel owners and operators must ensure that the design and 
construction of any FAD to be deployed or redeployed (i.e., placed in 
the water) in the IATTC Convention Area uses only non-entangling FAD 
materials.
    (h) Biodegradable FAD materials. In addition to complying with the 
requirement to use non-entangling materials specified in paragraph (g) 
of this section, vessel owners and operators must ensure that the 
design and construction of any FAD to be deployed or redeployed in the 
IATTC Convention Area meets the following specifications:
    (1) Beginning January 1, 2026, all FADs deployed or redeployed in 
the IATTC Convention Area must be designed and constructed according to 
one of the following sets of specifications:
    (i) The surface part of the FAD must be made of fully biodegradable 
materials, except for flotation components (e.g., plastic buoys, foam, 
purse-seine corks), whereas the subsurface part of the FAD may contain 
non-biodegradable materials (e.g., synthetic raffia, metallic frame, 
plastic floats, nylon ropes); or
    (ii) The subsurface part of the FAD must be made of fully 
biodegradable materials, whereas the surface part and any flotation 
components (e.g., plastic buoys, foam, purse-seine corks) of the FAD 
may contain non-biodegradable materials (e.g., synthetic raffia, 
metallic frame, plastic floats, nylon ropes); or
    (iii) The surface part, except for flotation components (e.g., 
plastic buoys, foam, purse-seine corks), and subsurface part must be 
made of fully biodegradable materials. Non-biodegradable materials, in 
particular nylon ropes, can be used exclusively to strengthen the 
structure of the floating or underwater component of the FAD.
    (2) Beginning on January 1, 2029, all FADs deployed or redeployed 
in the IATTC Convention Area must be made of fully biodegradable 
materials, except for flotation components (e.g., plastic buoys, foam, 
purse seine corks), which may be made of non-biodegradable material. 
Non-biodegradable materials, in particular nylon ropes, can be used 
exclusively to strengthen the structure of the floating or underwater 
component of the FAD.
    (3) Restrictions on biodegradable FAD materials set forth in 
paragraphs (h)(1) and (2) of this section do not apply to satellite 
buoys that are attached to FADs in order to track them.

[FR Doc. 2024-15654 Filed 7-18-24; 8:45 am]
BILLING CODE 3510-22-P