[Federal Register Volume 89, Number 93 (Monday, May 13, 2024)]
[Notices]
[Pages 41473-41474]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-10317]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2011-0189]


Servicing Multi-Piece and Single Piece Rim Wheels Standard; 
Extension of the Office of Management and Budget's (OMB) Approval of 
Information Collection (Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning the proposal to 
extend the Office of Management and Budget's (OMB) approval of the 
information collection requirements specified in the Servicing Multi-
Piece and Single Piece Rim Wheels Standard.

DATES: Comments must be submitted (postmarked, sent, or received) by 
July 12, 2024.

ADDRESSES: 
    Electronically: You may submit comments and attachments 
electronically at https://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Docket: To read or download comments or other material in the 
docket, go to https://www.regulations.gov. Documents in the docket are 
listed in the https://www.regulations.gov index; however, some 
information (e.g., copyrighted material) is not publicly available to 
read or download through the websites. All submissions, including 
copyrighted material, are available for inspection through the OSHA 
Docket Office. Contact the OSHA Docket Office at (202) 693-2350 (TTY 
(877) 889-5627) for assistance in locating docket submissions.
    Instructions: All submissions must include the agency name and OSHA 
docket number (OSHA-2011-0189) for the Information Collection Request 
(ICR). OSHA will place all comments, including any personal 
information, in the public docket, which may be made available online. 
Therefore, OSHA cautions interested parties about submitting personal 
information such as social security numbers and birthdates.
    For further information on submitting comments, see the ``Public 
Participation'' heading in the section of this notice titled 
SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT: Seleda Perryman, Directorate of

[[Page 41474]]

Standards and Guidance, OSHA, U.S. Department of Labor; telephone (202) 
693-2222.

SUPPLEMENTARY INFORMATION:

I. Background

    The Department of Labor, as part of the continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accordance with the Paperwork Reduction Act 
of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that 
information is in the desired format, reporting burden (time and costs) 
is minimal, the collection instruments are clearly understood, and 
OSHA's estimate of the information collection burden is accurate. The 
Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651 et 
seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the OSH Act or for developing 
information regarding the causes and prevention of occupational 
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also 
requires that OSHA obtain such information with minimum burden upon 
employers, especially those operating small businesses, and to reduce 
to the maximum extent feasible unnecessary duplication of effort in 
obtaining information (29 U.S.C. 657).
    The following is a description of the information collection 
requirements contained in the standard on servicing multi-piece and 
single piece rim wheels.

Certification of Repair (Sec.  1910.177(d)(3)(iv))

    This paragraph requires that when restraining devices and barriers 
are removed from service because they are defective, they shall not be 
returned to service until they are repaired and reinspected. If the 
repair is structural, the manufacturer or a Registered Professional 
Engineer must certify that the strength requirements specified in 
(d)(3)(i) of the Standard have been met. The certification records are 
used to assure that equipment has been properly repaired. The 
certification records also provide the most efficient means for OSHA 
compliance officers to determine that an employer is complying with the 
Standard.

Marking or Tagging of Wheel Components (Sec.  1910.177(e)(2))

    This paragraph requires that defective wheels and wheel components 
``be marked or tagged unserviceable and removed from the service 
area.'' Under this requirement, OSHA is providing employers with 
sufficient information from which they can derive the wording to use in 
marking the object or constructing a tag. Therefore, this provision 
imposes no paperwork burden because it falls within the portion of 5 
CFR 1320.3(c)(2) that states, ``The public disclosure of information 
originally supplied by the Federal government to the recipient for the 
purpose of disclosure to the public is not included within the 
definition of `collection of information.''

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the agency's functions to 
protect workers, including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information, and 
transmission techniques.

III. Proposed Actions

    OSHA is requesting that OMB extend the approval of the information 
collection requirements contained in Servicing Multi-Piece and Single 
Piece Rim Wheels Standard. The agency is requesting that the burden 
remains for one hour.
    OSHA will summarize the comments submitted in response to this 
notice and will include this summary in the request to OMB to extend 
the approval of the information collection requirements.
    Type of Review: Extension of a currently approved collection.
    Title: Servicing Multi-Piece and Single Piece Rim Wheels Standard.
    OMB Control Number: 1218-0219.
    Affected Public: Business or other for-profits.
    Number of Respondents: 85.
    Number of Responses: 9.
    Frequency of Responses: On occasion.
    Average Timeper Response: 5/60.
    Estimated Total Burden Hours: 1.
    Estimated Cost (Operation and Maintenance): $0.

IV. Public Participation--Submission of Comments on this Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) electronically at https://www.regulations.gov, which is the Federal 
eRulemaking Portal; or (2) by facsimile (fax), if your comments, 
including attachments, are not longer than 10 pages you may fax them to 
the OSHA Docket Office at (202) 693-1648. All comments, attachments, 
and other material must identify the agency name and the OSHA docket 
number for the ICR (OSHA-2011-0189). You may supplement electronic 
submission by uploading document files electronically.
    Comments and submissions are posted without change at https://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as social security numbers and 
dates of birth. Although all submissions are listed in the https://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download from this 
website. All submission, including copyrighted material, are available 
for inspection and copying at the OSHA Docket Office. Information on 
using the https://www.regulations.gov website to submit comments and 
access the docket is available at the website's ``User Tips'' link.
    Contact the OSHA Docket Office at (202) 693-2350, (TTY (877) 889-
5627) for information about materials not available from the website, 
and for assistance in using the internet to locate docket submissions.

V. Authority and Signature

    James S. Frederick, Deputy Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 8-2020 
(85 FR 58393).

    Signed at Washington, DC, on May 6, 2024.
James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2024-10317 Filed 5-10-24; 8:45 am]
BILLING CODE 4510-26-P