[Federal Register Volume 89, Number 86 (Thursday, May 2, 2024)]
[Rules and Regulations]
[Pages 35701-35703]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-09355]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2024-0222; Project Identifier MCAI-2023-01072-T; 
Amendment 39-22735; AD 2024-08-02]
RIN 2120-AA64


Airworthiness Directives; ATR--GIE Avions de Transport 
R[eacute]gional Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for 
certain ATR--GIE Avions de Transport R[eacute]gional Model ATR42 and 
ATR72 airplanes. This AD was prompted by a report of an electrical 
contactor that failed with contacts in the intermediate position, 
causing the airplane to lose power to multiple electrical systems. This 
AD requires repetitive operational tests of the affected part, and, 
depending on findings, accomplishment of applicable corrective action, 
as specified in a European Union Aviation Safety Agency (EASA) AD, 
which is incorporated by reference. The FAA is issuing this AD to 
address the unsafe condition on these products.

DATES: This AD is effective June 6, 2024.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in this AD as of June 6, 
2024.

ADDRESSES: 
    AD Docket: You may examine the AD docket at regulations.gov under 
Docket No. FAA-2024-0222; or in person at Docket Operations between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD 
docket contains this final rule, the mandatory continuing airworthiness 
information (MCAI), any comments received, and other information. The 
address for Docket Operations is U.S. Department of Transportation, 
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 
New Jersey Avenue SE, Washington, DC 20590.
    Material Incorporated by Reference:
     For EASA material, contact EASA, Konrad-Adenauer-Ufer 3, 
50668 Cologne, Germany; telephone +49 221 8999 000; email 
[email protected]; website easa.europa.eu. You may find this material 
on the EASA website at ad.easa.europa.eu.
     You may view this material at the FAA, Airworthiness 
Products Section, Operational Safety Branch, 2200 South 216th St., Des 
Moines, WA. For information on the availability of this material at the 
FAA, call 206-231-3195. It is also available in the AD docket at 
regulations.gov under Docket No. FAA-2024-0222.

FOR FURTHER INFORMATION CONTACT: Shahram Daneshmandi, Aviation Safety 
Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; 
telephone: 206-231-3220; email: [email protected].

SUPPLEMENTARY INFORMATION:

Background

    The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 
CFR part 39 by adding an AD that would apply to ATR--GIE Avions de 
Transport R[eacute]gional Model ATR42-200, -300, -320, and -500; and 
ATR72-101, -102, -201, -202, -211, -212, and -212A airplanes, except 
those on which ATR modification (mod) 05948 has been embodied in 
production. The NPRM published in the Federal Register on February 7, 
2024 (89 FR 8361). The NPRM was prompted by AD 2023-0181, dated October 
13, 2023 (EASA AD 2023-0181) (also referred to as the MCAI), issued by 
EASA, which is the Technical Agent for the Member States of the 
European Union. The MCAI states that one event of electrical failure 
has been reported on a pre-mod 05948 airplane, possibly caused by a 
functional item number (FIN) 1PA contactor failing with contacts in the 
intermediate position.
    In the NPRM, the FAA proposed to require repetitive operational 
tests of the affected part, and, depending on findings, accomplishment 
of applicable corrective action, as specified in EASA AD 2023-0181. The 
FAA is issuing this AD to address an electrical failure. This 
condition, if not addressed, could lead to temporary loss of the direct 
current emergency electrical network and loss of control of the 
airplane.
    You may examine the MCAI in the AD docket at regulations.gov under 
Docket No. FAA-2024-0222.

[[Page 35702]]

Discussion of Final Airworthiness Directive

Comments

    The FAA received comments from the Air Line Pilots Association, 
International, and an anonymous individual, both of whom supported the 
NPRM without change.

Conclusion

    This product has been approved by the aviation authority of another 
country and is approved for operation in the United States. Pursuant to 
the FAA's bilateral agreement with this State of Design Authority, it 
has notified the FAA of the unsafe condition described in the MCAI 
referenced above. The FAA reviewed the relevant data, considered the 
comments received, and determined that air safety requires adopting 
this AD as proposed. Accordingly, the FAA is issuing this AD to address 
the unsafe condition on this product. Except for minor editorial 
changes this AD is adopted as proposed in the NPRM. None of the changes 
will increase the economic burden on any operator.

Related Service Information Under 1 CFR Part 51

    EASA AD 2023-0181 specifies procedures for repetitive operational 
tests on the contactor 1PA, and, depending on findings, accomplishment 
of applicable corrective actions. Corrective actions include 
replacement of the contactor. This material is reasonably available 
because the interested parties have access to it through their normal 
course of business or by the means identified in the ADDRESSES section.

Costs of Compliance

    The FAA estimates that this AD affects 49 airplanes of U.S. 
registry. The FAA estimates the following costs to comply with this AD:

                                      Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
                                                                   Cost per
                  Labor cost                      Parts cost        product          Cost on U.S. operators
----------------------------------------------------------------------------------------------------------------
1 work-hour x $85 per hour = $85..............              $0             $85  $4,165 per test.
----------------------------------------------------------------------------------------------------------------

    The FAA estimates the following costs to do any necessary on-
condition actions that would be required based on the results of any 
required actions. The FAA has no way of determining the number of 
aircraft that might need this on-condition action:

                 Estimated Costs of On-Condition Actions
------------------------------------------------------------------------
                                                             Cost per
              Labor cost                   Parts cost        product
------------------------------------------------------------------------
2 work-hours x $85 per hour = $170....          $1,625           $1,795
------------------------------------------------------------------------

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or develop on products identified in this rulemaking action.

Regulatory Findings

    This AD will not have federalism implications under Executive Order 
13132. This AD will not have a substantial direct effect on the States, 
on the relationship between the national government and the States, or 
on the distribution of power and responsibilities among the various 
levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Will not affect intrastate aviation in Alaska, and
    (3) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive:

2024-08-02 ATR--GIE Avions de Transport R[eacute]gional: Amendment 
39-22735; Docket No. FAA-2024-0222; Project Identifier MCAI-2023-
01072-T.

(a) Effective Date

    This airworthiness directive (AD) is effective June 6, 2024.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to the ATR--GIE Avions de Transport 
R[eacute]gional airplanes specified in paragraphs (c)(1) and (2) of 
this AD, certificated in any category, as identified in European 
Union Aviation Safety Agency (EASA) AD 2023-0181, dated October 13, 
2023 (EASA AD 2023-0181).
    (1) Model ATR42-200, -300, -320, and -500 airplanes.
    (2) Model ATR72-101, -102, -201, -202, -211, -212, and -212A 
airplanes.

(d) Subject

    Air Transport Association (ATA) of America Code 24, Electrical 
power.

[[Page 35703]]

(e) Unsafe Condition

    This AD was prompted by a report of an electrical contactor that 
failed with contacts in the intermediate position, causing the 
airplane to lose power to multiple electrical systems. The FAA is 
issuing this AD to address an electrical failure. The unsafe 
condition, if not addressed, could result in temporary loss of the 
direct current emergency electrical network and loss of control of 
the airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Requirements

    Except as specified in paragraph (h) of this AD: Comply with all 
required actions and compliance times specified in, and in 
accordance with, EASA AD 2023-0181.

(h) Exceptions to EASA AD 2023-0181

    (1) Where EASA AD 2023-0181 refers to its effective date, this 
AD requires using the effective date of this AD.
    (2) This AD does not adopt the ``Remarks'' section of EASA AD 
2023-0181.

(i) Additional AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
International Validation Branch, FAA, has the authority to approve 
AMOCs for this AD, if requested using the procedures found in 14 CFR 
39.19. In accordance with 14 CFR 39.19, send your request to your 
principal inspector or responsible Flight Standards Office, as 
appropriate. If sending information directly to the manager of the 
International Validation Branch, mail it to the address identified 
in paragraph (j) of this AD. Information may be emailed to: [email protected]. Before using any approved AMOC, notify your 
appropriate principal inspector, or lacking a principal inspector, 
the manager of the responsible Flight Standards Office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain instructions from a manufacturer, the instructions must be 
accomplished using a method approved by the Manager, International 
Validation Branch, FAA; or EASA; or ATR--GIE Avions de Transport 
R[eacute]gional's EASA Design Organization Approval (DOA). If 
approved by the DOA, the approval must include the DOA-authorized 
signature.

(j) Additional Information

    For more information about this AD, contact Shahram Daneshmandi, 
Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, 
Westbury, NY 11590; telephone: 206-231-3220; email: 
[email protected].

(k) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless this AD specifies otherwise.
    (i) European Union Aviation Safety Agency (EASA) AD 2023-0181, 
dated October 13, 2023.
    (ii) [Reserved]
    (3) For EASA AD 2023-0181, contact EASA, Konrad-Adenauer-Ufer 3, 
50668 Cologne, Germany; telephone +49 221 8999 000; email 
[email protected]; website easa.europa.eu. You may find this EASA 
AD on the EASA website at ad.easa.europa.eu.
    (4) You may view this material at the FAA, Airworthiness 
Products Section, Operational Safety Branch, 2200 South 216th St., 
Des Moines, WA. For information on the availability of this material 
at the FAA, call 206-231-3195.
    (5) You may view this material at the National Archives and 
Records Administration (NARA). For information on the availability 
of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations, or email [email protected].

    Issued on April 12, 2024.
Victor Wicklund,
Deputy Director, Compliance & Airworthiness Division, Aircraft 
Certification Service.
[FR Doc. 2024-09355 Filed 5-1-24; 8:45 am]
BILLING CODE 4910-13-P