[Federal Register Volume 88, Number 249 (Friday, December 29, 2023)]
[Notices]
[Pages 90168-90174]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-28781]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
Initiation of Antidumping and Countervailing Duty Administrative
Reviews
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
SUMMARY: The U.S. Department of Commerce (Commerce) has received
requests to conduct administrative reviews of various antidumping duty
(AD) and countervailing duty (CVD) orders with November anniversary
dates. In accordance with Commerce's regulations, we are initiating
those administrative reviews.
DATES: Applicable December 29, 2023.
FOR FURTHER INFORMATION CONTACT: Brenda E. Brown, AD/CVD Operations,
Customs Liaison Unit, Enforcement and Compliance, International Trade
Administration, U.S. Department of Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230, telephone: (202) 482-4735.
SUPPLEMENTARY INFORMATION:
Background
Commerce has received timely requests, in accordance with 19 CFR
351.213(b), for administrative reviews of various AD and CVD orders
with November anniversary dates.
All deadlines for the submission of various types of information,
certifications, or comments or actions by Commerce discussed below
refer to the number of calendar days from the applicable starting time.
[[Page 90169]]
Respondent Selection
In the event that Commerce limits the number of respondents for
individual examination for administrative reviews initiated pursuant to
requests made for the orders identified below, Commerce intends to
select respondents based on U.S. Customs and Border Protection (CBP)
data for U.S. imports during the period of review (POR). We intend to
place the CBP data on the record within five days of publication of the
initiation notice and to make our decision regarding respondent
selection within 35 days of publication of the initiation Federal
Register notice. Comments regarding the CBP data and respondent
selection should be submitted within seven days after the placement of
the CBP data on the record of this review. Parties wishing to submit
rebuttal comments should submit those comments within five days after
the deadline for the initial comments.
In the event that Commerce decides it is necessary to limit
individual examination of respondents and conduct respondent selection
under section 777A(c)(2) of the Tariff Act of 1930, as amended (the
Act), the following guidelines regarding collapsing of companies for
purposes of respondent selection will apply. In general, Commerce has
found that determinations concerning whether particular companies
should be ``collapsed'' (e.g., treated as a single entity for purposes
of calculating AD rates) require a substantial amount of detailed
information and analysis, which often require follow-up questions and
analysis. Accordingly, Commerce will not conduct collapsing analyses at
the respondent selection phase of this review and will not collapse
companies at the respondent selection phase unless there has been a
determination to collapse certain companies in a previous segment of
this AD proceeding (e.g., investigation, administrative review, new
shipper review, or changed circumstances review). For any company
subject to this review, if Commerce determined, or continued to treat,
that company as collapsed with others, Commerce will assume that such
companies continue to operate in the same manner and will collapse them
for respondent selection purposes. Otherwise, Commerce will not
collapse companies for purposes of respondent selection.
Parties are requested to (a) identify which companies subject to
review previously were collapsed, and (b) provide a citation to the
proceeding in which they were collapsed. Further, if companies are
requested to complete the Quantity and Value (Q&V) Questionnaire for
purposes of respondent selection, in general, each company must report
volume and value data separately for itself. Parties should not include
data for any other party, even if they believe they should be treated
as a single entity with that other party. If a company was collapsed
with another company or companies in the most recently completed
segment of this proceeding where Commerce considered collapsing that
entity, complete Q&V data for that collapsed entity must be submitted.
Notice of No Sales
With respect to AD administrative reviews, we intend to rescind the
review where there are no suspended entries for a company or entity
under review and/or where there are no suspended entries under the
company-specific case number for that company or entity. Where there
may be suspended entries, if a producer or exporter named in this
notice of initiation had no exports, sales, or entries during the POR,
it may notify Commerce of this fact within 30 days of publication of
this notice in the Federal Register for Commerce to consider how to
treat suspended entries under that producer's or exporter's company-
specific case number.
Deadline for Withdrawal of Request for Administrative Review
Pursuant to 19 CFR 351.213(d)(1), a party that has requested a
review may withdraw that request within 90 days of the date of
publication of the notice of initiation of the requested review. The
regulation provides that Commerce may extend this time if it is
reasonable to do so. Determinations by Commerce to extend the 90-day
deadline will be made on a case-by-case basis.
Deadline for Particular Market Situation Allegation
Section 504 of the Trade Preferences Extension Act of 2015 amended
the Act by adding the concept of a particular market situation (PMS)
for purposes of constructed value under section 773(e) of the Act.\1\
Section 773(e) of the Act states that ``if a particular market
situation exists such that the cost of materials and fabrication or
other processing of any kind does not accurately reflect the cost of
production in the ordinary course of trade, the administering authority
may use another calculation methodology under this subtitle or any
other calculation methodology.'' When an interested party submits a PMS
allegation pursuant to section 773(e) of the Act, Commerce will respond
to such a submission consistent with 19 CFR 351.301(c)(2)(v). If
Commerce finds that a PMS exists under section 773(e) of the Act, then
it will modify its dumping calculations appropriately.
---------------------------------------------------------------------------
\1\ See Trade Preferences Extension Act of 2015, Public Law 114-
27, 129 Stat. 362 (2015).
---------------------------------------------------------------------------
Neither section 773(e) of the Act nor 19 CFR 351.301(c)(2)(v) set a
deadline for the submission of PMS allegations and supporting factual
information. However, in order to administer section 773(e) of the Act,
Commerce must receive PMS allegations and supporting factual
information with enough time to consider the submission. Thus, should
an interested party wish to submit a PMS allegation and supporting new
factual information pursuant to section 773(e) of the Act, it must do
so no later than 20 days after submission of initial responses to
section D of the questionnaire.
Separate Rates
In proceedings involving non-market economy (NME) countries,
Commerce begins with a rebuttable presumption that all companies within
the country are subject to government control and, thus, should be
assigned a single AD deposit rate. It is Commerce's policy to assign
all exporters of merchandise subject to an administrative review in an
NME country this single rate unless an exporter can demonstrate that it
is sufficiently independent so as to be entitled to a separate rate.
To establish whether a firm is sufficiently independent from
government control of its export activities to be entitled to a
separate rate, Commerce analyzes each entity exporting the subject
merchandise. In accordance with the separate rates criteria, Commerce
assigns separate rates to companies in NME cases only if respondents
can demonstrate the absence of both de jure and de facto government
control over export activities.
All firms listed below that wish to qualify for separate rate
status in the administrative reviews involving NME countries must
complete, as appropriate, either a Separate Rate Application or
Certification, as described below. For these administrative reviews, in
order to demonstrate separate rate eligibility, Commerce requires
entities for whom a review was requested, that were assigned a separate
rate in the most recent segment of this proceeding in which they
participated, to certify that they continue to meet the criteria for
obtaining a separate rate. The Separate Rate Certification form will be
available
[[Page 90170]]
on Commerce's website at https://access.trade.gov/Resources/nme/nme-sep-rate.html on the date of publication of this Federal Register
notice. In responding to the certification, please follow the
``Instructions for Filing the Certification'' in the Separate Rate
Certification. Separate Rate Certifications are due to Commerce no
later than 30 calendar days after publication of this Federal Register
notice. The deadline and requirement for submitting a Separate Rate
Certification applies equally to NME-owned firms, wholly foreign-owned
firms, and foreign sellers who purchase and export subject merchandise
to the United States.
Entities that currently do not have a separate rate from a
completed segment of the proceeding \2\ should timely file a Separate
Rate Application to demonstrate eligibility for a separate rate in this
proceeding. In addition, companies that received a separate rate in a
completed segment of the proceeding that have subsequently made
changes, including, but not limited to, changes to corporate structure,
acquisitions of new companies or facilities, or changes to their
official company name,\3\ should timely file a Separate Rate
Application to demonstrate eligibility for a separate rate in this
proceeding. The Separate Rate Application will be available on
Commerce's website at https://access.trade.gov/Resources/nme/nme-sep-rate.html on the date of publication of this Federal Register notice.
In responding to the Separate Rate Application, refer to the
instructions contained in the application. Separate Rate Applications
are due to Commerce no later than 30 calendar days after publication of
this Federal Register notice. The deadline and requirement for
submitting a Separate Rate Application applies equally to NME-owned
firms, wholly foreign-owned firms, and foreign sellers that purchase
and export subject merchandise to the United States.
---------------------------------------------------------------------------
\2\ Such entities include entities that have not participated in
the proceeding, entities that were preliminarily granted a separate
rate in any currently incomplete segment of the proceeding (e.g., an
ongoing administrative review, new shipper review, etc.) and
entities that lost their separate rate in the most recently
completed segment of the proceeding in which they participated.
\3\ Only changes to the official company name, rather than trade
names, need to be addressed via a Separate Rate Application.
Information regarding new trade names may be submitted via a
Separate Rate Certification.
---------------------------------------------------------------------------
Exporters and producers must file a timely Separate Rate
Application or Certification if they want to be considered for
individual examination. Furthermore, exporters and producers who submit
a Separate Rate Application or Certification and subsequently are
selected as mandatory respondents will no longer be eligible for
separate rate status unless they respond to all parts of the
questionnaire as mandatory respondents.
Initiation of Reviews: In accordance with 19 CFR 351.221(c)(1)(i),
we are initiating administrative reviews of the following AD and CVD
orders and findings. We intend to issue the final results of these
reviews not later than November 30, 2024.
---------------------------------------------------------------------------
\4\ In the initiation notice that published on November 15, 2023
(88 FR 78298) Commerce inadvertently did not clarify the entries
covered by the review with respect to the company listed in this
notice. In this notice, we are clarifying that entries of
merchandise produced and exported by Dear Year Brothers Mfg. Co.,
Ltd or produced by Fool Shing Enterprise Co., Ltd, and exported by
Dear Year Brothers Mfg. Co., Ltd or produced by Hong Tai Enterprise
and exported by Dear Year Brothers Mfg. Co., Ltd are excluded from
the antidumping duty order. This exclusion is not applicable to
merchandise exported to the United States by Dear Year Brothers Mfg.
Co., Ltd in any other producer/exporter combination or by third
parties that sourced subject merchandise from the excluded producer/
exporter combinations. See Narrow Woven Ribbons With Woven Selvedge
from Taiwan and the People's Republic of China: Antidumping Duty
Orders, 75 FR 53632 (September 1, 2010).
------------------------------------------------------------------------
Period to be reviewed
------------------------------------------------------------------------
AD Proceedings
Argentina: Oil Country Tubular Goods, A-357-824 5/11/22-10/31/23
Siderca S.A.I.C............................
Tenaris Global Services S.A................
Austria: Strontium Chromate, A-433-813......... 11/1/22-10/31/23
Habich GmbH................................
Brazil: Certain Aluminum Foil, A-351-856....... 11/1/22-10/31/23
CBA Itapissuma Ltda........................
Companhia Brasileira de Alum[iacute]nio....
Germany: Thermal Paper, A-428-850.............. 11/1/22-10/31/23
Koehler Oberkirch GmbH.....................
Koehler Paper SE; Koehler Kehl GmbH........
Matra Atlantic GmbH........................
Mitsubishi Hitec Paper.....................
Papierfabrik August Koehler SE.............
India: Welded Stainless Pressure Pipe, A-533- 11/1/22-10/31/23
867...........................................
Prakash Steelage Ltd.......................
Seth Steelage Pvt. Ltd.....................
Ratnamani Metals & Tubes Ltd...............
Suncity Metals and Tubes Private Limited...
Suncity Sheets Pvt., Ltd...................
Japan: Thermal Paper, A-588-880................ 11/1/22-10/31/23
Nippon Paper Industries Co., Ltd.; Nippon
Paper Papylia Co., Ltd....................
Mexico: Oil Country Tubular Goods, A-201-856... 5/11/22-10/31/23
Siderca S.A.I.C............................
Tenaris Global Services S.A................
Tubos de Acero de Mexico S.A...............
Mexico: Steel Concrete Reinforcing Bar, A-201- 11/1/22-10/31/23
844...........................................
Compania Siderurgica del Pacifico S.A. de
C.V.......................................
Deacero S.A.P.I. de C.V.,
I.N.G.E.T.E.K.N.O.S. Estructurales, S.A.
de C.V....................................
Gerdau Corsa, S.A.P.I. de C.V..............
Grupo Acerero S.A. de C.V..................
[[Page 90171]]
Grupo Simec S.A.B. de C.V.; Aceros
Especiales Simec Tlaxcala, S.A. de C.V.;
Fundiciones de Acero Estructurales, S.A.
de C.V.; Grupo Chant, S.A.P.I. de C.V.;
Operadora de Perfiles Sigosa, S.A. de
C.V.; Orge S.A. de C.V.; Perfiles
Comerciales Sigosa, S.A. de C.V.;
Siderurgicos Noroeste, S.A. de C.V.; Simec
International 6 S.A. de C.V.; Simec
International 7, S.A. de C.V.; Simec
International, S.A. de C.V................
RRLC S.A.P.I. de C.V.......................
Sidertul S.A. de C.V.......................
Siderurgica del Occidente y Pacifico S.A.
de C.V....................................
Simec International 9 S.A. de C.V..........
TA 2000 S.A. de C.V........................
Talleres Y Aceros S.A. de C.V..............
Oman: Aluminum Foil, A-523-815................. 11/1/22-10/31/23
Oman Aluminium Rolling Company.............
Republic of Korea: Circular Welded Non-Alloy 11/1/22-10/31/23
Steel Pipe, A-580-809.........................
Aju Besteel................................
Bookook Steel..............................
Chan Won Bending...........................
Dae Ryung..................................
Daewoo Shipbuilding & Marine Engineering
(DSME)....................................
Daiduck Piping.............................
Dong Yang Steel Pipe.......................
Dongbu Steel Co., Ltd.; Dongbu Steel.......
EEW Korea Company..........................
Histeel Co., Ltd. Histeel..................
Hoa Phat Steel Pipe Co., Ltd...............
Hoa Sen Group..............................
Husteel Co., Ltd...........................
Hyundai RB.................................
Hyundai Steel Company......................
Kiduck Industries..........................
Kum Kang Kind..............................
Kumsoo Connecting..........................
Miju Steel Mfg.............................
NEXTEEL Co., Ltd...........................
Samkand M & T..............................
Seah FS....................................
SeAH Steel Corporation; Seah Steel.........
SeAH Steel VINA Corporation................
Steel Flower...............................
YCP Co., Ltd...............................
Republic of Korea: Thermal Paper, A-580-911.... 11/1/22-10/31/23
Hansol Paper Company.......................
Taiwan: Narrow Woven Ribbons With Woven 9/1/22-8/31/23
Selvedge, A-583-844 \4\.......................
Dear Year Brothers Mfg. Co., Ltd...........
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
The People's Republic of China: Diamond 11/1/22-10/31/23
Sawblades and Parts Thereof, A-570-900........
ASHINE Diamond Tools Co., Ltd..............
Bosch Power Tools China Co., Ltd...........
Bosun Tools Co., Ltd.......................
Chengdu Huifeng New Material Technology
Co., Ltd..................................
Danyang City Ou Di Ma Tools Co., Ltd.......
Danyang Hantronic Import & Export Co., Ltd.
Danyang Huachang Diamond Tool Manufacturing
Co., Ltd..................................
Danyang Like Tools Manufacturing Co., Ltd..
Danyang NYCL Tools Manufacturing Co., Ltd..
Danyang Realsharp Tools Co., Ltd...........
Danyang Tongyu Tools Co., Ltd..............
Danyang Tsunda Diamond Tools Co., Ltd......
Danyang Weiwang Tools Manufacturing Co.,
Ltd.......................................
Diamond Tools Technology (Thailand) Co.,
Ltd.......................................
Fujian Quanzhou Aotu Precise Machine Co.,
Ltd.......................................
Guangdong Sun Rising Tools Co., Ltd........
Guilin Tebon Superhard Material Co., Ltd...
Hailian Saw Technology Co., Ltd............
Hangzhou Deer King Industrial and Trading
Co., Ltd..................................
Hangzhou Kingburg Import & Export Co., Ltd.
Hangzhou Xinweiye Tools Co., Ltd...........
Hebei XMF Tools Group Co., Ltd.............
Henan Huanghe Whirlwind International Co.,
Ltd.......................................
Hong Kong Hao Xin International Group
Limited...................................
Hubei Changjiang Precision Engineering
Materials Technology Co., Ltd.............
Hubei Sheng Bai Rui Diamond Tools Co., Ltd.
Husqvarna (Hebei) Co., Ltd.................
Huzhou Gu's Import & Export Co., Ltd.......
[[Page 90172]]
Jiangsu Fengtai Diamond Tool Manufacture
Co., Ltd..................................
Jiangsu Fengtai Diamond Tools Co., Ltd.....
Jiangsu Huachang Diamond Tools
Manufacturing Co., Ltd....................
Jiangsu Inter-China Group Corporation......
Jiangsu Jinfeida Power Tools...............
Jiangsu Yaofeng Tools Co., Ltd.............
Jiangsu Youhe Tool Manufacturer Co., Ltd...
Orient Gain International Limited..........
Pantos Logistics (HK) Company Limited......
Protec Tools Co., Ltd......................
Pujiang Talent Diamond Tools Co., Ltd......
Qingdao Hyosung Diamond Tools Co., Ltd.....
Qingdao Shinhan Diamond Industrial Co., Ltd
Qingyuan Shangtai Diamond Tools Co., Ltd...
Quanzhou Sunny Superhard Tools Co., Ltd....
Quanzhou Zhongzhi Diamond Tool Co., Ltd....
Rizhao Hein Saw Co., Ltd...................
Saint-Gobain Abrasives (Shanghai) Co., Ltd.
Shanghai Jingquan Industrial Trade Co., Ltd
Shanghai Starcraft Tools Co., Ltd..........
Shanghai Vinon Tools Industrial Co.........
Sino Tools Co., Ltd........................
Suzhou Blade Tech Tool Co., Ltd............
Tangshan Metallurgical Saw Blade Co., Ltd..
Weihai Xiangguang Mechanical Industrial
Co., Ltd..................................
Wuhan Baiyi Diamond Tools Co., Ltd.........
Wuhan Sadia Trading Co., Ltd...............
Wuhan Wanbang Laser Diamond Tools Co., Ltd.
Wuhan ZhaoHua Technology Co., Ltd..........
Xiamen ZL Diamond Technology Co., Ltd......
Zhejiang Shall Tools Co., Ltd..............
Zhejiang Wanli Tools Group Co., Ltd........
Zhenjiang Luckyway Tools Co., Ltd..........
ZL Diamond Technology Co., Ltd.............
ZL Diamond Tools Co., Ltd..................
The People's Republic of China: Fresh Garlic, A- 11/1/22-10/31/23
570-831.......................................
Jilin Yilong Changbai Mountain Industrial
Co........................................
Laiwu Ever Green Food Co., Ltd.............
Zhengzhou Harmoni Spice Co., Ltd...........
The People's Republic of China: Forged Steel 11/1/22-10/31/23
Fittings, A-570-067...........................
Jiangsu Forged Pipe Fittings Co. Ltd.......
Qingdao Bestflow Industrial Co., Ltd.......
Xin Yi International Trade Co., Ltd........
Yingkou Guangming Pipeline Industry Co.,
Ltd.......................................
The People's Republic of China: Lightweight 11/1/22-10/31/23
Thermal Paper, A-570-920......................
Guangdong Guanhao High-Tech................
Guangdong Polygon New Materials............
Henan Jianghe Paper........................
Turkey: Aluminum Foil, A-489-844............... 11/1/22-10/31/23
ASAS Aluminyum Sanayi ve Ticaret A.S.Assan
Aluminyum Sanayi ve Ticaret A.S., Kibar
Dis Ticaret A.S., and Ispak Esnek Ambalaj
Sanayi A.S.Ilda Pack Ambalaj Panda
Aluminyum A.S.............................
CVD Proceedings
India: Welded Stainless Pressure Pipe, C-533- 1/1/22-12/31/22
868...........................................
Prakash Steelage Ltd.......................
Seth Steelage Pvt. Ltd.....................
Oman: Aluminum Foil, C-523-816................. 1/1/22-12/31/22
Oman Aluminium Rolling Company LLC.........
Republic of Korea: Oil Country Tubular Goods, C- 9/29/22-12/31/22
580-913.......................................
AJU Besteel Co., Ltd.......................
Husteel Co., Ltd...........................
ILJIN Steel Corporation....................
SeAH Steel Corporation; SeAH Steel Holding
Corporation...............................
The People's Republic of China: Chlorinated 1/1/22-12/31/22
Isocyanurates, C-570-991......................
Hebei Fuhui Water Treatment Co., Ltd.......
Henan Sinowin Chemical Industry Co., Ltd...
Heze Huayi Chemical Co., Ltd...............
Juancheng Kangtai Chemical Co., Ltd........
Linhai Limin Chemicals Co., Ltd............
Puyang Cleanway Chemicals Ltd..............
Qingdao Fortune Logistics Co., Ltd.........
Shandong Dongyue Chemical Co., Ltd.........
Shandong Taihe Chemicals Co., Ltd..........
Shanghai Special Logistics Co., Ltd........
Shanghai Tianxiang Logistics Co., Ltd......
Topdan Industries Co., Limited.............
The People's Republic of China: Forged Steel 1/1/22-12/31/22
Fittings, C-570-068...........................
[[Page 90173]]
Both-Well (Taizhou) Steel Fittings, Co.,
Ltd.......................................
Yingkou Guangming Pipeline Industry Co.,
Ltd.......................................
Turkey: Aluminum Foil, C-489-845............... 1/1/22-12/31/22
ASAS Aluminyum Sanayi ve Ticaret A.S.......
Assan Aluminyum Sanayi ve Ticaret A.S.;
Ispak Esnek Ambalaj Sanayi A.S.; Kibar Dis
Ticaret A.S................................
Panda Aluminyum............................
Turkey: Steel Concrete Reinforcing Bar, C-489- 1/1/22-12/31/22
819...........................................
Ans Kargo Lojistik Tas ve Tic Baykan Dis
Ticaret...................................
Colakoglu Dis Ticaret A.S.; Colakoglu
Metalurji A.S.............................
Icdas Celik Enerji Tersane ve Ulasim Sanayi
A.S.......................................
Kaptan Demir Celik Endustrisi ve Ticaret
A.S.; Kaptan Metal Dis Ticaret ve Nakliyat
A.S.......................................
Kibar dis Ticaret A.S......................
Meral Makina Iml Ith Ihr Gida..............
Sami Soybas Demir Sanayi ve Ticaret........
Yucel Boru Ihracat Ithalat ve Pazarlama....
Suspension Agreements
None...........................................
Deferral of Initiation of Administrative Review
Republic of Korea: Oil Country Tubular Goods, 9/29/22-12/31/22
\5\C-580-913 9/29/22-12/31/22.................
NEXTEEL Co., Ltd...........................
------------------------------------------------------------------------
Duty Absorption Reviews
---------------------------------------------------------------------------
\5\ Pursuant to 19 CFR 351.213(c), Commerce received a request
from NEXTEEL Co., Ltd. to defer the administrative review of this
CVD order with respect to itself for one year. Commerce did not
receive any objections to the deferral within 15 days after the end
of the anniversary month. As such, we will initiate the
administrative review with respect to NEXTEEL Co., Ltd. in the month
immediately following the next anniversary month of the CVD order on
Oil Country Tubular Goods from the Republic of Korea.
---------------------------------------------------------------------------
During any administrative review covering all or part of a period
falling between the first and second or third and fourth anniversary of
the publication of an AD order under 19 CFR 351.211 or a determination
under 19 CFR 351.218(f)(4) to continue an order or suspended
investigation (after sunset review), Commerce, if requested by a
domestic interested party within 30 days of the date of publication of
the notice of initiation of the review, will determine whether ADs have
been absorbed by an exporter or producer subject to the review if the
subject merchandise is sold in the United States through an importer
that is affiliated with such exporter or producer. The request must
include the name(s) of the exporter or producer for which the inquiry
is requested.
Gap Period Liquidation
For the first administrative review of any order, there will be no
assessment of antidumping or countervailing duties on entries of
subject merchandise entered, or withdrawn from warehouse, for
consumption during the relevant ``gap'' period of the order (i.e., the
period following the expiry of provisional measures and before
definitive measures were put into place), if such a gap period is
applicable to the POR.
Administrative Protective Orders and Letters of Appearance
Interested parties must submit applications for disclosure under
administrative protective orders in accordance with the procedures
outlined in Commerce's regulations at 19 CFR 351.305. Those procedures
apply to administrative reviews included in this notice of initiation.
Parties wishing to participate in any of these administrative reviews
should ensure that they meet the requirements of these procedures
(e.g., the filing of separate letters of appearance as discussed at 19
CFR 351.103(d)).
Factual Information Requirements
Commerce's regulations identify five categories of factual
information in 19 CFR 351.102(b)(21), which are summarized as follows:
(i) evidence submitted in response to questionnaires; (ii) evidence
submitted in support of allegations; (iii) publicly available
information to value factors under 19 CFR 351.408(c) or to measure the
adequacy of remuneration under 19 CFR 351.511(a)(2); (iv) evidence
placed on the record by Commerce; and (v) evidence other than factual
information described in (i)-(iv). These regulations require any party,
when submitting factual information, to specify under which subsection
of 19 CFR 351.102(b)(21) the information is being submitted and, if the
information is submitted to rebut, clarify, or correct factual
information already on the record, to provide an explanation
identifying the information already on the record that the factual
information seeks to rebut, clarify, or correct. The regulations, at 19
CFR 351.301, also provide specific time limits for such factual
submissions based on the type of factual information being submitted.
Please review the Final Rule,\6\ available at https://www.govinfo.gov/content/pkg/FR-2013-07-17/pdf/2013-17045.pdf, prior to submitting
factual information in this segment. Note that Commerce has amended
certain of its requirements pertaining to the service of documents in
19 CFR 351.303(f).\7\
---------------------------------------------------------------------------
\6\ See Certification of Factual Information To Import
Administration During Antidumping and Countervailing Duty
Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule); see also the
frequently asked questions regarding the Final Rule, available at
https://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
\7\ Administrative Protective Order, Service, and Other
Procedures in Antidumping and Countervailing Duty Proceedings; Final
Rule, 88 FR 67069 (September 29, 2023).
---------------------------------------------------------------------------
Any party submitting factual information in an AD or CVD proceeding
must certify to the accuracy and completeness of that information using
the formats provided at the end of the Final Rule.\8\ Commerce intends
to reject factual submissions in any proceeding segments if the
submitting party does not comply with applicable certification
requirements.
---------------------------------------------------------------------------
\8\ See section 782(b) of the Act; see also Final Rule; and the
frequently asked questions regarding the Final Rule, available at
https://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
---------------------------------------------------------------------------
Extension of Time Limits Regulation
Parties may request an extension of time limits before a time limit
established under Part 351 expires, or as otherwise specified by
Commerce.\9\ In general, an extension request will be considered
untimely if it is filed after the time limit established under Part 351
expires. For submissions which are due from multiple parties
simultaneously, an extension request will be considered untimely if it
is filed after 10:00 a.m. on the due date.
[[Page 90174]]
Examples include, but are not limited to: (1) case and rebuttal briefs,
filed pursuant to 19 CFR 351.309; (2) factual information to value
factors under 19 CFR 351.408(c), or to measure the adequacy of
remuneration under 19 CFR 351.511(a)(2), filed pursuant to 19 CFR
351.301(c)(3) and rebuttal, clarification and correction filed pursuant
to 19 CFR 351.301(c)(3)(iv); (3) comments concerning the selection of a
surrogate country and surrogate values and rebuttal; (4) comments
concerning CBP data; and (5) Q&V questionnaires. Under certain
circumstances, Commerce may elect to specify a different time limit by
which extension requests will be considered untimely for submissions
which are due from multiple parties simultaneously. In such a case,
Commerce will inform parties in the letter or memorandum setting forth
the deadline (including a specified time) by which extension requests
must be filed to be considered timely. This policy also requires that
an extension request must be made in a separate, stand-alone
submission, and clarifies the circumstances under which Commerce will
grant untimely-filed requests for the extension of time limits. Please
review the Final Rule, available at https://www.gpo.gov/fdsys/pkg/FR-2013-09-20/html/2013-22853.htm, prior to submitting factual information
in these segments.
---------------------------------------------------------------------------
\9\ See 19 CFR 351.302.
---------------------------------------------------------------------------
These initiations and this notice are in accordance with section
751(a) of the Act (19 U.S.C. 1675(a)) and 19 CFR 351.221(c)(1)(i).
Dated: December 22, 2023.
James Maeder,
Deputy Assistant Secretary for Antidumping and Countervailing Duty
Operations.
[FR Doc. 2023-28781 Filed 12-28-23; 8:45 am]
BILLING CODE 3510-DS-P