[Federal Register Volume 88, Number 194 (Tuesday, October 10, 2023)]
[Notices]
[Pages 69904-69905]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-22408]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


Notice of Scope Ruling Applications Filed in Antidumping and 
Countervailing Duty Proceedings

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: The U.S. Department of Commerce (Commerce) received scope 
ruling applications, requesting that scope inquiries be conducted to 
determine whether identified products are covered by the scope of 
antidumping duty (AD) and/or countervailing duty (CVD) orders and that 
Commerce issue scope rulings pursuant to those inquiries. In accordance 
with Commerce's regulations, we are notifying the public of the filing 
of the scope ruling applications listed below in the month of August 
2023.

DATES: Applicable October 10, 2023.

FOR FURTHER INFORMATION CONTACT: Terri Monroe, AD/CVD Operations, 
Customs Liaison Unit, Enforcement and Compliance, International Trade 
Administration, U.S. Department of Commerce, 1401 Constitution Avenue 
NW, Washington, DC 20230, telephone: (202) 482-1384.

SUPPLEMENTARY INFORMATION: 

Notice of Scope Ruling Applications

    In accordance with 19 CFR 351.225(d)(3), we are notifying the 
public of the following scope ruling applications related to AD and CVD 
orders and findings filed in or around the month of August 2023. This 
notification includes, for each scope application: (1) identification 
of the AD and/or CVD orders at issue (19 CFR 351.225(c)(1)); (2) 
concise public descriptions of the products at issue, including the 
physical characteristics (including chemical, dimensional and technical 
characteristics) of the products (19 CFR 351.225(c)(2)(ii)); (3) the 
countries where the products are produced and the countries from where 
the products are exported (19 CFR 351.225(c)(2)(i)(B)); (4) the full 
names of the applicants; and (5) the dates that the scope applications 
were filed with Commerce and the name of the ACCESS scope segment where 
the scope applications can be found.\1\ This notice does not include 
applications which have been rejected and not properly resubmitted. The 
scope ruling applications listed below are available on Commerce's 
online e-filing and document management system, Antidumping and 
Countervailing Duty Electronic Service System (ACCESS), at https://access.trade.gov.
---------------------------------------------------------------------------

    \1\ See Regulations to Improve Administration and Enforcement of 
Antidumping and Countervailing Duty Laws, 86 FR 52300, 52316 
(September 20, 2021) (Final Rule) (``It is our expectation that the 
Federal Register list will include, where appropriate, for each 
scope application the following data: (1) identification of the AD 
and/or CVD orders at issue; (2) a concise public summary of the 
product's description, including the physical characteristics 
(including chemical, dimensional and technical characteristics) of 
the product; (3) the country(ies) where the product is produced and 
the country from where the product is exported; (4) the full name of 
the applicant; and (5) the date that the scope application was filed 
with Commerce.'')
---------------------------------------------------------------------------

Scope Ruling Applications

    Passenger Vehicle and Light Truck Tires from Thailand (A-549-842); 
certain light truck spare tires; \2\ produced in and exported from 
Thailand; submitted by Maxxis International (Thailand) Co. Ltd.; August 
7, 2023; ACCESS scope segment ``Maxxis International.''
---------------------------------------------------------------------------

    \2\ The product is a light truck spare tire with a 255/80R17 
size designation, a ``temporary use only'' molding on the sidewall, 
and a tread depth no greater than 6.2 mm. The product does not have 
a Uniform Tire Quality Grade Standard rating molded on the sidewall.
---------------------------------------------------------------------------

    Circular Welded Carbon Quality Steel Pipe from the People's 
Republic of China (China) (A-570-910/C-570-911); 15 models of torque 
tubes (torque tubes); \3\ produced in and exported from China; 
submitted by Nextracker LLC (Nextracker); August 11, 2023; ACCESS scope 
segment ``15 Models of Torque Tubes--2023.''
---------------------------------------------------------------------------

    \3\ The products are welded carbon quality steel tubes that are 
mechanical tubing designed and used as drive shafts in solar 
tracking systems sold by Nextracker. The torque tubes have lengths 
ranging from 6.72m to 9.44m, wall thicknesses ranging from 2.5mm to 
4mm, swaged ends with an outer diameter of 127mm, non-swaged ends 
with outer diameter of either 117mm or 119mm, 5 to 8 holes drilled 
on both ends of the tubes, and a total of 22 to 25 deburred holes 
drilled into the tubes, and out-of-straightness tolerances of 
0.73mm/m to 0.83mm/m. The wall thickness and length tolerances of 
the torque tubes are either the same or more stringent than the 
corresponding tolerances contemplated by ASMT A513. The torque tubes 
are produced from high strength, low alloy steel.
---------------------------------------------------------------------------

    Glycine from India, Japan, Thailand, and China (A-533-883/C-533-
884/A-588-878/A-549-837/C-570-081); calcium glycinate; \4\ produced in 
and exported from India, Japan, Thailand, and China; submitted by GEO 
Speciality Chemicals, Inc. (GEO); August 14, 2023; ACCESS scope segment 
``Calcium Glycinate.''
---------------------------------------------------------------------------

    \4\ The product is calcium glycinate (C4H8CaN204; CAS #35947-07-
0), which is a precursor used in the manufacture of glycine. It is 
also used as a dietary supplement for humans and animals, as a 
pharmaceutical intermediate, and in cosmetic applications. Calcium 
glycinate is also known as calcium bisglycinate.''
---------------------------------------------------------------------------

    Common Alloy Aluminum Sheet from Germany (A-428-849); heat-
treatable clad aluminum aircraft sheet, Aluminum Association series 
2XXX (viz., 2024) and 7XXX (viz., 7075) (Aircraft Sheet); \5\ produced 
in and exported from Germany; submitted by Capps Manufacturing Inc. 
(Capps); August 31, 2023; ACCESS scope segment ``Heat-Treatable 
Aluminum Aircraft Sheet.''
---------------------------------------------------------------------------

    \5\ The product has a thickness of approximately 2.5mm and is 
available as follows: 110 in. wide, 94 in. wide by 154 in. long, and 
88 in. wide by 224 in. long. The primary alloying element for the 
series 2xxx clad aluminum is a minimum of 3.8% copper to a maximum 
of 4.9% copper. The manganese tolerances are 0.30% to 0.9%. The 
primary alloying element for series 7xxx clad aluminum is a minimum 
of 5.1% zinc to a maximum of 6.1% zinc. The manganese tolerances are 
0.0% to 0.3%.
---------------------------------------------------------------------------

Notification to Interested Parties

    This list of scope ruling applications is not an identification of 
scope inquiries that have been initiated. In

[[Page 69905]]

accordance with 19 CFR 351.225(d)(1), if Commerce has not rejected a 
scope ruling application nor initiated the scope inquiry within 30 days 
after the filing of the application, the application will be deemed 
accepted and a scope inquiry will be deemed initiated the following 
day--day 31.\6\ Commerce's practice generally dictates that where a 
deadline falls on a weekend, Federal holiday, or other non-business 
day, the appropriate deadline is the next business day.\7\ Accordingly, 
if the 30th day after the filing of the application falls on a non-
business day, the next business day will be considered the ``updated'' 
30th day, and if the application is not rejected or a scope inquiry 
initiated by or on that particular business day, the application will 
be deemed accepted and a scope inquiry will be deemed initiated on the 
next business day which follows the ``updated'' 30th day.\8\
---------------------------------------------------------------------------

    \6\ In accordance with 19 CFR 351.225(d)(2), within 30 days 
after the filing of a scope ruling application, if Commerce 
determines that it intends to address the scope issue raised in the 
application in another segment of the proceeding (such as a 
circumvention inquiry under 19 CFR 351.226 or a covered merchandise 
inquiry under 19 CFR 351.227), it will notify the applicant that it 
will not initiate a scope inquiry, but will instead determine if the 
product is covered by the scope at issue in that alternative 
segment.
    \7\ See Notice of Clarification: Application of ``Next Business 
Day'' Rule for Administrative Determination Deadlines Pursuant to 
the Tariff Act of 1930, As Amended, 70 FR 24533 (May 10, 2005).
    \8\ This structure maintains the intent of the applicable 
regulation, 19 CFR 351.225(d)(1), to allow day 30 and day 31 to be 
separate business days.
---------------------------------------------------------------------------

    In accordance with 19 CFR 351.225(m)(2), if there are companion AD 
and CVD orders covering the same merchandise from the same country of 
origin, the scope inquiry will be conducted on the record of the AD 
proceeding. Further, please note that pursuant to 19 CFR 351.225(m)(1), 
Commerce may either apply a scope ruling to all products from the same 
country with the same relevant physical characteristics, (including 
chemical, dimensional, and technical characteristics) as the product at 
issue, on a country-wide basis, regardless of the producer, exporter, 
or importer of those products, or on a company-specific basis.
    For further information on procedures for filing information with 
Commerce through ACCESS and participating in scope inquiries, please 
refer to the Filing Instructions section of the Scope Ruling 
Application Guide, at https://access.trade.gov/help/Scope_Ruling_Guidance.pdf. Interested parties, apart from the scope 
ruling applicant, who wish to participate in a scope inquiry and be 
added to the public service list for that segment of the proceeding 
must file an entry of appearance in accordance with 19 CFR 
351.103(d)(1) and 19 CFR 351.225(n)(4). Interested parties are advised 
to refer to the case segment in ACCESS as well as 19 CFR 351.225(f) for 
further information on the scope inquiry procedures, including the 
timelines for the submission of comments.
    Please note that this notice of scope ruling applications filed in 
AD and CVD proceedings may be published before any potential 
initiation, or after the initiation, of a given scope inquiry based on 
a scope ruling application identified in this notice. Therefore, please 
refer to the case segment on ACCESS to determine whether a scope ruling 
application has been accepted or rejected and whether a scope inquiry 
has been initiated.
    Interested parties who wish to be served scope ruling applications 
for a particular AD or CVD order may file a request to be included on 
the annual inquiry service list during the anniversary month of the 
publication of the AD or CVD order in accordance with 19 CFR 351.225(n) 
and Commerce's procedures.\9\
---------------------------------------------------------------------------

    \9\ See Scope Ruling Application; Annual Inquiry Service List; 
and Informational Sessions, 86 FR 53205 (September 27, 2021).
---------------------------------------------------------------------------

    Interested parties are invited to comment on the completeness of 
this monthly list of scope ruling applications received by Commerce. 
Any comments should be submitted to James Maeder, Deputy Assistant 
Secretary for AD/CVD Operations, Enforcement and Compliance, 
International Trade Administration, via email to [email protected].
    This notice of scope ruling applications filed in AD and CVD 
proceedings is published in accordance with 19 CFR 351.225(d)(3).

    Dated: October 3, 2023.
James Maeder,
Deputy Assistant Secretary for Antidumping and Countervailing Duty 
Operations.
[FR Doc. 2023-22408 Filed 10-6-23; 8:45 am]
BILLING CODE 3510-DS-P