[Federal Register Volume 88, Number 63 (Monday, April 3, 2023)]
[Notices]
[Pages 19614-19616]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-06792]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


Notice of Scope Ruling Applications Filed in Antidumping and 
Countervailing Duty Proceedings

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: The U.S. Department of Commerce (Commerce) received scope 
ruling applications, requesting that scope inquiries be conducted to 
determine whether identified products are covered by the scope of 
antidumping duty (AD) and/or countervailing duty (CVD) orders and that 
Commerce issue scope rulings pursuant to those inquiries. In accordance 
with Commerce's regulations, we are notifying the public of the filing 
of the scope ruling applications listed below in the month of February 
2023.

DATES: Applicable April 3, 2023.

FOR FURTHER INFORMATION CONTACT: Terri Monroe, AD/CVD Operations, 
Customs Liaison Unit, Enforcement and Compliance, International Trade 
Administration, U.S. Department of Commerce, 1401 Constitution Avenue 
NW, Washington, DC 20230, telephone: (202) 482-1384.

SUPPLEMENTARY INFORMATION: 

Notice of Scope Ruling Applications

    In accordance with 19 CFR 351.225(d)(3), we are notifying the 
public of the following scope ruling applications related to AD and CVD 
orders and findings filed in or around the month of February 2023. This 
notification includes, for each scope application: (1) identification 
of the AD and/or CVD orders at issue (19 CFR 351.225(c)(1)); (2) 
concise public descriptions of the products at issue, including the 
physical characteristics (including chemical, dimensional and technical 
characteristics) of the products (19 CFR 351.225(c)(2)(ii)); (3) the 
countries where the products are produced and the countries from where 
the products are exported (19 CFR 351.225(c)(2)(i)(B)); (4) the full 
names of the applicants; and (5) the dates that the scope applications 
were filed with Commerce and the name of the ACCESS scope segment where 
the scope applications can be found.\1\ This notice does not include 
applications which have been rejected and not properly resubmitted. The 
scope ruling applications listed below are available on Commerce's 
online e-filing and document management system, Antidumping and 
Countervailing Duty Electronic Service System (ACCESS), at https://access.trade.gov.
---------------------------------------------------------------------------

    \1\ See Regulations to Improve Administration and Enforcement of 
Antidumping and Countervailing Duty Laws, 86 FR 52300, 52316 
(September 20, 2021) (Final Rule) (``It is our expectation that the 
Federal Register list will include, where appropriate, for each 
scope application the following data: (1) identification of the AD 
and/or CVD orders at issue; (2) a concise public summary of the 
product's description, including the physical characteristics 
(including chemical, dimensional and technical characteristics) of 
the product; (3) the country(ies) where the product is produced and 
the country from where the product is exported; (4) the full name of 
the applicant; and (5) the date that the scope application was filed 
with Commerce.'')
---------------------------------------------------------------------------

Scope Ruling Applications

    Wooden Bedroom Furniture from the People's Republic of China 
(China) (A-570-890); various models of wooden

[[Page 19615]]

bathroom cabinets; \2\ produced in and exported from China; submitted 
by Teamson, US, Inc.; February 3, 2023; ACCESS scope segment ``Teamson 
Bathroom Furniture.''
---------------------------------------------------------------------------

    \2\ The products are five models of floor standing wooden 
bathroom cabinets, all of which feature double-doors with two 
shelves. The models' exterior dimensions range from 24-inches to 27-
inches in length, 12.5-inches to 16-inches in width, and 32-inches 
to 62.25-inches in height.
---------------------------------------------------------------------------

    Aluminum Wire and Cable from China (A-570-095/C-570-096); aluminum 
conductor cable manufactured with Chinese-origin aluminum wire; \3\ 
produced in and exported from Korea; submitted by Imperium Cables LLC; 
February 8, 2023; ACCESS scope segment ``Imperium Cables, LLC.''
---------------------------------------------------------------------------

    \3\ The products are Type SE Style (R) with lugs and 
terminations and Type URD 600 Volt Secondary UD Cable with/without 
lugs and terminations. Both types are made with stranded aluminum 
wire insulated with a layer of thermoplastic compound from an 
extruded polyethylene.
---------------------------------------------------------------------------

    Chassis and Subassemblies from China (A-570-135/C-570-136); 
finished chassis from Vietnam with Chinese components; \4\ produced in 
and exported from Vietnam; submitted by Pitts Enterprises, Inc. dba 
Dorsey Intermodal; February 13, 2023; ACCESS scope segment ``Pitts Axle 
and Landing Gear Components.''
---------------------------------------------------------------------------

    \4\ The products are Vietnamese chassis with Chinese components, 
specifically, axles and landing gear legs. The chassis' rectangular 
frame is made of steel with a suspension system and axle system, 
wheels and tires, brakes, a lighting and electrical system, a 
coupling for towing behind a truck tractor, and a locking system or 
systems to secure shipping containers attached to the chassis. 
Chassis are designed to carry containers of various sizes, usually 
20', 40', 45' or 53'.
---------------------------------------------------------------------------

    Wooden Bedroom Furniture from China (A-570-890); steel-framed 
platform beds containing decorative wood panels in either the 
headboard, footboard, or both; produced in and exported from China; \5\ 
submitted by Zinus, Inc.; February 15, 2023; ACCESS scope segment 
``Zinus Metal & Wood Platform Beds.''
---------------------------------------------------------------------------

    \5\ The products are steel-framed platform beds with structural 
components (the frames and legs) made of metal and either metal or 
wooden mattress support slats. The request pertains to seven 
platform bed products, each of which comes in various sizes (twin, 
full, queen, king).
---------------------------------------------------------------------------

    Wooden Cabinets and Vanities and Components Thereof from China (A-
570-106/C-570-107); Cabinets and Vanities made from Phragmites; \6\ 
produced in and exported from China; submitted by Nanjing Kaylang Co., 
Ltd.; February 23, 2023; ACCESS scope segment ``Kaylang Phragmites.''
---------------------------------------------------------------------------

    \6\ The products are cabinets and vanities made from phragmites, 
a wetland grass reed.
---------------------------------------------------------------------------

    Alloy and Certain Carbon Steel Threaded Rod from China (A-570-932); 
carbon steel wedge anchors; \7\ produced in and exported from China; 
submitted by Chun Yu Works USA Inc.; February 24, 2023; ACCESS scope 
segment ``Chun Yu Works-Carbon Steel Wedge Anchors.''
---------------------------------------------------------------------------

    \7\ The products are wedge anchors, which consist of (1) a cone-
headed bolt that is threaded along the majority of the shaft length, 
with a lip to secure the expansion clip in place; (2) an expansion 
clip that is permanently affixed to the bolt between the conical 
head and the lip; (3) a hex nut; and (4) a washer. All components 
are made of zinc-coated carbon steel. The bolt portion of the wedge 
anchors is made of Q215 steel. The wedge anchors have a nominal 
length of 1\3/4\-inches to 12 inches, and a nominal diameter of \1/
4\-inches to 1 inch.
---------------------------------------------------------------------------

    Alloy and Certain Carbon Steel Threaded Rod from China (A-570-104); 
carbon steel hex nut sleeve anchors; \8\ produced in and exported from 
China; submitted by Chun Yu Works; February 27, 2023; ACCESS scope 
segment ``Chun Yu Works-Hex Nut Sleeve Anchors.''
---------------------------------------------------------------------------

    \8\ The products are hex nut sleeve anchors, which consist of 
(1) a cone-headed bolt that is threaded along the majority of the 
shaft length; (2) an expansion sleeve; (3) a hex nut; and (4) a 
washer. All components are made of zinc-coated carbon steel. The 
bolt portion of the sleeve anchors is made of Q215 steel. The sleeve 
anchors have a nominal length of 1\1/2\-inches to 6\1/4\-inches, and 
a nominal diameter of \5/16\-inches to \3/4\-inches.
---------------------------------------------------------------------------

    Alloy and Certain Carbon Steel Threaded Rod from China (C-570-105); 
carbon steel hex nut sleeve anchors; \9\ produced in and exported from 
China; submitted by Chun Yu Works; February 27, 2023; ACCESS scope 
segment ``Chun Yu Works-Hex Nut Sleeve Anchors.''
---------------------------------------------------------------------------

    \9\ The products that are the subject of this scope application 
are hex nut sleeve anchors, which consist of (1) a cone-headed bolt 
that is threaded along the majority of the shaft length; (2) an 
expansion sleeve; (3) a hex nut; and (4) a washer. All components 
are made of zinc-coated carbon steel. The bolt portion of the sleeve 
anchors is made of Q215 steel. The sleeve anchors have a nominal 
length of 1\1/2\-inches to 6\1/4\-inches, and a nominal diameter of 
\5/16\ inches to \3/4\-inches.
---------------------------------------------------------------------------

    Alloy and Certain Steel Threaded Rod from China (A-570-932); carbon 
steel hex nut sleeve anchors; \10\ produced in and exported from China; 
submitted by Chun Yu Works; February 28, 2023; ACCESS scope segment 
``Chun Yu Works-Hex Nut Sleeve Anchors.''
---------------------------------------------------------------------------

    \10\ The products that are the subject of this scope application 
are hex nut sleeve anchors, which consist of (1) a cone-headed bolt 
that is threaded along the majority of the shaft length; (2) an 
expansion sleeve; (3) a hex nut; and (4) a washer. All components 
are made of zinc-coated carbon steel. The bolt portion of the sleeve 
anchors is made of Q215 steel. The sleeve anchors have a nominal 
length of 1\1/2\ inches to 6\1/4\-inches, and a nominal diameter of 
\5/16\-inches to \3/4\-inches.
---------------------------------------------------------------------------

Notification to Interested Parties

    This list of scope ruling applications is not an identification of 
scope inquiries that have been initiated. In accordance with 19 CFR 
351.225(d)(1), if Commerce has not rejected a scope ruling application 
nor initiated the scope inquiry within 30 days after the filing of the 
application, the application will be deemed accepted and a scope 
inquiry will be deemed initiated the following day--day 31.\11\ 
Commerce's practice generally dictates that where a deadline falls on a 
weekend, Federal holiday, or other non-business day, the appropriate 
deadline is the next business day.\12\ Accordingly, if the 30th day 
after the filing of the application falls on a non-business day, the 
next business day will be considered the ``updated'' 30th day, and if 
the application is not rejected or a scope inquiry initiated by or on 
that particular business day, the application will be deemed accepted 
and a scope inquiry will be deemed initiated on the next business day 
which follows the ``updated'' 30th day.\13\
---------------------------------------------------------------------------

    \11\ In accordance with 19 CFR 351.225(d)(2), within 30 days 
after the filing of a scope ruling application, if Commerce 
determines that it intends to address the scope issue raised in the 
application in another segment of the proceeding (such as a 
circumvention inquiry under 19 CFR 351.226 or a covered merchandise 
inquiry under 19 CFR 351.227), it will notify the applicant that it 
will not initiate a scope inquiry, but will instead determine if the 
product is covered by the scope at issue in that alternative 
segment.
    \12\ See Notice of Clarification: Application of ``Next Business 
Day'' Rule for Administrative Determination Deadlines Pursuant to 
the Tariff Act of 1930, As Amended, 70 FR 24533 (May 10, 2005).
    \13\ This structure maintains the intent of the applicable 
regulation, 19 CFR 351.225(d)(1), to allow day 30 and day 31 to be 
separate business days.
---------------------------------------------------------------------------

    In accordance with 19 CFR 351.225(m)(2), if there are companion AD 
and CVD orders covering the same merchandise from the same country of 
origin, the scope inquiry will be conducted on the record of the AD 
proceeding. Further, please note that pursuant to 19 CFR 351.225(m)(1), 
Commerce may either apply a scope ruling to all products from the same 
country with the same relevant physical characteristics, (including 
chemical, dimensional, and technical characteristics) as the product at 
issue, on a country-wide basis, regardless of the producer, exporter, 
or importer of those products, or on a company-specific basis.
    For further information on procedures for filing information with 
Commerce through ACCESS and participating in scope inquiries, please 
refer to the Filing Instructions section of the Scope Ruling 
Application Guide, at https://access.trade.gov/help/Scope_Ruling_Guidance.pdf. Interested parties, apart from the scope 
ruling applicant, who wish to participate in a scope inquiry and be 
added to the public service list for that segment of the proceeding 
must file an entry of appearance in

[[Page 19616]]

accordance with 19 CFR 351.103(d)(1) and 19 CFR 351.225(n)(4). 
Interested parties are advised to refer to the case segment in ACCESS 
as well as 19 CFR 351.225(f) for further information on the scope 
inquiry procedures, including the timelines for the submission of 
comments.
    Please note that this notice of scope ruling applications filed in 
AD and CVD proceedings may be published before any potential 
initiation, or after the initiation, of a given scope inquiry based on 
a scope ruling application identified in this notice. Therefore, please 
refer to the case segment on ACCESS to determine whether a scope ruling 
application has been accepted or rejected and whether a scope inquiry 
has been initiated.
    Interested parties who wish to be served scope ruling applications 
for a particular AD or CVD order may file a request to be included on 
the annual inquiry service list during the anniversary month of the 
publication of the AD or CVD order in accordance with 19 CFR 351.225(n) 
and Commerce's procedures.\14\
---------------------------------------------------------------------------

    \14\ See Scope Ruling Application; Annual Inquiry Service List; 
and Informational Sessions, 86 FR 53205 (September 27, 2021).
---------------------------------------------------------------------------

    Interested parties are invited to comment on the completeness of 
this monthly list of scope ruling applications received by Commerce. 
Any comments should be submitted to James Maeder, Deputy Assistant 
Secretary for AD/CVD Operations, Enforcement and Compliance, 
International Trade Administration, via email to [email protected].
    This notice of scope ruling applications filed in AD and CVD 
proceedings is published in accordance with 19 CFR 351.225(d)(3).

    Dated: March 28, 2023.
James Maeder,
Deputy Assistant Secretary for Antidumping and Countervailing Duty 
Operations.
[FR Doc. 2023-06792 Filed 3-31-23; 8:45 am]
BILLING CODE 3510-DS-P