[Federal Register Volume 88, Number 29 (Monday, February 13, 2023)]
[Proposed Rules]
[Pages 9195-9199]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-03003]


 ========================================================================
 Proposed Rules
                                                 Federal Register
 ________________________________________________________________________
 
 This section of the FEDERAL REGISTER contains notices to the public of 
 the proposed issuance of rules and regulations. The purpose of these 
 notices is to give interested persons an opportunity to participate in 
 the rule making prior to the adoption of the final rules.
 
 ========================================================================
 

  Federal Register / Vol. 88, No. 29 / Monday, February 13, 2023 / 
Proposed Rules  

[[Page 9195]]



NUCLEAR REGULATORY COMMISSION

10 CFR Part 72

[NRC-2022-0109]
RIN 3150-AK86


List of Approved Spent Fuel Storage Casks: Holtec International 
HI-STORM 100 Cask System, Certificate of Compliance No. 1014, Renewal 
of Initial Certificate and Amendment Nos. 1 Through 15

AGENCY: Nuclear Regulatory Commission.

ACTION: Proposed rule.

-----------------------------------------------------------------------

SUMMARY: The U.S. Nuclear Regulatory Commission (NRC) is proposing to 
amend its spent fuel storage regulations by revising the Holtec 
International HI-STORM 100 Cask System listing within the ``List of 
approved spent fuel storage casks'' to renew, for 40 years, the initial 
certificate (Amendment 0) and Amendment Nos. 1 through 15 of 
Certificate of Compliance No. 1014. The renewal of the initial 
certificate and Amendment Nos. 1 through 15 would revise the 
certificate of compliance's conditions and technical specifications to 
address aging management activities related to the structures, systems, 
and components important to safety of the dry storage system to ensure 
that these will maintain their intended functions during the period of 
extended storage operations.

DATES: Submit comments by March 15, 2023. Comments received after this 
date will be considered if it is practical to do so, but the NRC is 
able to ensure consideration only for comments received on or before 
this date.

ADDRESSES: Submit your comments, identified by Docket ID NRC-2022-0109, 
at https://www.regulations.gov. If your material cannot be submitted 
using https://www.regulations.gov, call or email the individuals listed 
in the FOR FURTHER INFORMATION CONTACT section of this document for 
alternate instructions.
    For additional direction on obtaining information and submitting 
comments, see ``Obtaining Information and Submitting Comments'' in the 
SUPPLEMENTARY INFORMATION section of this document.

FOR FURTHER INFORMATION CONTACT: Kristina Banovac, Office of Nuclear 
Material Safety and Safeguards; telephone: 301-415-7116, email: 
[email protected] and James Firth, Office of Nuclear Material 
Safety and Safeguards, telephone: 301-415-6628, email: 
[email protected]. Both are staff of the U.S. Nuclear Regulatory 
Commission, Washington, DC 20555-0001.

SUPPLEMENTARY INFORMATION:

Table of Contents

I. Obtaining Information and Submitting Comments
II. Rulemaking Procedure
III. Background
IV. Plain Writing
V. Availability of Documents

I. Obtaining Information and Submitting Comments

A. Obtaining Information

    Please refer to Docket ID NRC-2022-0109 when contacting the NRC 
about the availability of information for this action. You may obtain 
publicly available information related to this action by any of the 
following methods:
     Federal Rulemaking Website: Go to https://www.regulations.gov and search for Docket ID NRC-2022-0109. Address 
questions about NRC dockets to Dawn Forder, telephone: 301-415-3407, 
email: [email protected]. For technical questions contact the 
individuals listed in the FOR FURTHER INFORMATION CONTACT section of 
this document.
     NRC's Agencywide Documents Access and Management System 
(ADAMS): You may obtain publicly available documents online in the 
ADAMS Public Documents collection at https://www.nrc.gov/reading-rm/adams.html. To begin the search, select ``Begin Web-based ADAMS 
Search.'' For problems with ADAMS, please contact the NRC's Public 
Document Room (PDR) reference staff at 1-800-397-4209, 301-415-4737, or 
by email to [email protected]. For the convenience of the reader, 
instructions about obtaining materials referenced in this document are 
provided in the ``Availability of Documents'' section.
     NRC's PDR: You may examine and purchase copies of public 
documents, by appointment, at the NRC's PDR, Room P1 B35, One White 
Flint North, 11555 Rockville Pike, Rockville, Maryland 20852. To make 
an appointment to visit the PDR, please send an email to 
[email protected] or call 1-800-397-4209 or 301-415-4737, between 
8:00 a.m. and 4:00 p.m. eastern time (ET), Monday through Friday, 
except Federal holidays.

B. Submitting Comments

    Please include Docket ID NRC-2022-0109 in your comment submission. 
The NRC requests that you submit comments through the Federal 
rulemaking website at https://www.regulations.gov. If your material 
cannot be submitted using https://www.regulations.gov, call or email 
the individuals listed in the FOR FURTHER INFORMATION CONTACT section 
of this document for alternate instructions.
    The NRC cautions you not to include identifying or contact 
information that you do not want to be publicly disclosed in your 
comment submission. The NRC will post all comment submissions at 
https://www.regulations.gov as well as enter the comment submissions 
into ADAMS. The NRC does not routinely edit comment submissions to 
remove identifying or contact information.
    If you are requesting or aggregating comments from other persons 
for submission to the NRC, then you should inform those persons not to 
include identifying or contact information that they do not want to be 
publicly disclosed in their comment submission. Your request should 
state that the NRC does not routinely edit comment submissions to 
remove such information before making the comment submissions available 
to the public or entering the comment into ADAMS.

II. Rulemaking Procedure

    Because the NRC considers this action to be non-controversial, the 
NRC is publishing this proposed rule concurrently with a direct final 
rule in the Rules and Regulations section of this issue of the Federal 
Register. The direct final rule will become effective on May 1, 2023. 
However, if the NRC receives any significant adverse comment by March 
15, 2023, then the NRC will publish a document that withdraws the

[[Page 9196]]

direct final rule. If the direct final rule is withdrawn, the NRC will 
address the comments in a subsequent final rule or as otherwise 
appropriate. In general, absent significant modifications to the 
proposed revisions requiring republication, the NRC will not initiate a 
second comment period on this action in the event the direct final rule 
is withdrawn.
    A significant adverse comment is a comment where the commenter 
explains why the rule would be inappropriate, including challenges to 
the rule's underlying premise or approach, or would be ineffective or 
unacceptable without a change. A comment is adverse and significant if:
    (1) The comment opposes the rule and provides a reason sufficient 
to require a substantive response in a notice-and-comment process. For 
example, a substantive response is required when:
    (a) The comment causes the NRC to reevaluate (or reconsider) its 
position or conduct additional analysis;
    (b) The comment raises an issue serious enough to warrant a 
substantive response to clarify or complete the record; or
    (c) The comment raises a relevant issue that was not previously 
addressed or considered by the NRC.
    (2) The comment proposes a change or an addition to the rule, and 
it is apparent that the rule would be ineffective or unacceptable 
without incorporation of the change or addition.
    (3) The comment causes the NRC to make a change (other than 
editorial) to the rule.
    For a more detailed discussion of the proposed rule changes and 
associated analyses, see the direct final rule published in the Rules 
and Regulations section of this issue of the Federal Register.

III. Background

    Section 218(a) of the Nuclear Waste Policy Act of 1982, as amended, 
states that ``[t]he Secretary [of the Department of Energy] shall 
establish a demonstration program, in cooperation with the private 
sector, for the dry storage of spent nuclear fuel at civilian nuclear 
power reactor sites, with the objective of establishing one or more 
technologies that the [Nuclear Regulatory] Commission may, by rule, 
approve for use at the sites of civilian nuclear power reactors 
without, to the maximum extent practicable, the need for additional 
site-specific approvals by the Commission.'' Section 133 of the Nuclear 
Waste Policy Act states, in part, that ``[t]he Commission shall, by 
rule, establish procedures for the licensing of any technology approved 
by the Commission under Section 219(a) [sic: 218(a)] for use at the 
site of any civilian nuclear power reactor.''
    To implement this mandate, the Commission approved dry storage of 
spent nuclear fuel in NRC-approved casks under a general license by 
publishing a final rule that added a new subpart K in part 72 of title 
10 of the Code of Federal Regulations (10 CFR) entitled ``General 
License for Storage of Spent Fuel at Power Reactor Sites'' (55 FR 
29181, July 18, 1990). This rule also established a new subpart L in 10 
CFR part 72 entitled ``Approval of Spent Fuel Storage Casks,'' which 
contains procedures and criteria for obtaining NRC approval of spent 
fuel storage cask designs and for the renewal of the cask design 
approval. The NRC subsequently issued a final rule on May 1, 2000 (65 
FR 25241) that approved the HI-STORM 100 Cask System design and added 
it to the list of NRC-approved cask designs in Sec.  72.214 as 
Certificate of Compliance No. 1014. On August 28, 2007 (72 FR 49561), 
the NRC amended the scope of the general licenses issued under 10 CFR 
72.210 to include the storage of spent fuel in an independent spent 
fuel storage installation at power reactor sites to persons authorized 
to possess or operate nuclear power reactors under 10 CFR part 52. On 
February 16, 2011 (76 FR 8872), the NRC amended subparts K and L in 10 
CFR part 72, to extend and clarify the term limits for certificates of 
compliance and revised the conditions for spent fuel storage casks 
renewals, including adding requirements for the safety analysis report 
to include time-limited aging analyses and a description of aging 
management programs. The NRC also clarified the terminology used in the 
regulations to use ``renewal'' rather than ``reapproval'' to better 
reflect that extending the term of a currently approved cask design is 
based on the cask design standards in effect at the time the 
certificate of compliance was approved rather than current standards.

IV. Plain Writing

    The Plain Writing Act of 2010 (Pub. L. 111-274) requires Federal 
agencies to write documents in a clear, concise, well-organized manner. 
The NRC has written this document to be consistent with the Plain 
Writing Act as well as the Presidential Memorandum, ``Plain Language in 
Government Writing,'' published June 10, 1998 (63 FR 31885). The NRC 
requests comment on the proposed rule with respect to clarity and 
effectiveness of the language used.

V. Availability of Documents

    The documents identified in the following table are available to 
interested persons as indicated.

------------------------------------------------------------------------
                                    ADAMS accession No./Federal Register
             Document                             citation
------------------------------------------------------------------------
       Proposed Certificates of Compliance and Proposed Technical
                             Specifications
------------------------------------------------------------------------
Proposed Renewed Certificate of    ML22098A235.
 Compliance No. 1014 (Amendment
 No. 0).
Proposed Renewed Certificate of    ML22098A236.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 0.
Proposed Renewed Certificate of    ML22098A237.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 0.
Proposed Renewed Certificate of    ML22098A238.
 Compliance No. 1014, Amendment
 No. 1.
Proposed Renewed Certificate of    ML22098A239.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 1.
Proposed Renewed Certificate of    ML22098A240.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 1.
Proposed Renewed Certificate of    ML22098A241.
 Compliance No. 1014, Amendment
 No. 2.
Proposed Renewed Certificate of    ML22098A242.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 2.
Proposed Renewed Certificate of    ML22098A243.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 2.
Proposed Renewed Certificate of    ML22098A244.
 Compliance No. 1014, Amendment
 No. 3.
Proposed Renewed Certificate of    ML22098A245.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 3.

[[Page 9197]]

 
Proposed Renewed Certificate of    ML22098A246.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 3.
Proposed Renewed Certificate of    ML22098A247.
 Compliance No. 1014, Amendment
 No. 4.
Proposed Renewed Certificate of    ML22098A248.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 4.
Proposed Renewed Certificate of    ML22098A249.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 4.
Proposed Renewed Certificate of    ML22098A250.
 Compliance No. 1014, Amendment
 No. 5.
Proposed Renewed Certificate of    ML22098A251.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 5.
Proposed Renewed Certificate of    ML22098A252.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 5.
Proposed Renewed Certificate of    ML22098A253.
 Compliance No. 1014, Amendment
 No. 6.
Proposed Renewed Certificate of    ML22098A254.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 6.
Proposed Renewed Certificate of    ML22098A255.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 6.
Proposed Renewed Certificate of    ML22098A256.
 Compliance No. 1014, Amendment
 No. 7.
Proposed Renewed Certificate of    ML22098A257.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 7.
Proposed Renewed Certificate of    ML22098A258.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 7.
Proposed Renewed Certificate of    ML22098A259.
 Compliance No. 1014 Appendix A-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 7.
Proposed Renewed Certificate of    ML22098A260.
 Compliance No. 1014 Appendix B-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 7.
Proposed Renewed Certificate of    ML22098A261.
 Compliance No. 1014, Amendment
 No. 8, Revision 1.
Proposed Renewed Certificate of    ML22098A262.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 8, Revision 1.
Proposed Renewed Certificate of    ML22098A263.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 8, Revision 1.
Proposed Renewed Certificate of    ML22098A264.
 Compliance No. 1014 Appendix A-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 8, Revision 1.
Proposed Renewed Certificate of    ML22098A265.
 Compliance No. 1014 Appendix B-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 8, Revision 1.
Proposed Renewed Certificate of    ML22098A266.
 Compliance No. 1014, Amendment
 No. 9, Revision 1.
Proposed Renewed Certificate of    ML22098A267.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 9, Revision 1.
Proposed Renewed Certificate of    ML22098A268.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 9, Revision 1.
Proposed Renewed Certificate of    ML22098A269.
 Compliance No. 1014 Appendix A-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 9, Revision 1.
Proposed Renewed Certificate of    ML22098A270.
 Compliance No. 1014 Appendix B-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 9, Revision 1.
Proposed Renewed Certificate of    ML22098A271.
 Compliance No. 1014, Amendment
 No. 10.
Proposed Renewed Certificate of    ML22098A272.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 10.
Proposed Renewed Certificate of    ML22098A273.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 10.
Proposed Renewed Certificate of    ML22098A274.
 Compliance No. 1014 Appendix A-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 10.
Proposed Renewed Certificate of    ML22098A275.
 Compliance No. 1014 Appendix B-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 10.
Proposed Renewed Certificate of    ML22098A276.
 Compliance No. 1014, Amendment
 No. 11.
Proposed Renewed Certificate of    ML22098A277.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 11.
Proposed Renewed Certificate of    ML22098A278.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 11.
Proposed Renewed Certificate of    ML22098A279.
 Compliance No. 1014 Appendix A-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 11.
Proposed Renewed Certificate of    ML22098A280.
 Compliance No. 1014 Appendix B-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 11.
Proposed Renewed Certificate of    ML22098A281.
 Compliance No. 1014, Amendment
 No. 12.
Proposed Renewed Certificate of    ML22098A282.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 12.
Proposed Renewed Certificate of    ML22098A283.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 12.
Proposed Renewed Certificate of    ML22098A284.
 Compliance No. 1014 Appendix A-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 12.
Proposed Renewed Certificate of    ML22098A285.
 Compliance No. 1014 Appendix B-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 12.
Proposed Renewed Certificate of    ML22098A286.
 Compliance No. 1014, Amendment
 No. 13.

[[Page 9198]]

 
Proposed Renewed Certificate of    ML22098A287.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 13.
Proposed Renewed Certificate of    ML22098A288.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 13.
Proposed Renewed Certificate of    ML22098A289.
 Compliance No. 1014 Appendix A-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 13.
Proposed Renewed Certificate of    ML22098A290.
 Compliance No. 1014 Appendix B-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 13.
Proposed Renewed Certificate of    ML22098A291.
 Compliance No. 1014, Amendment
 No. 14.
Proposed Renewed Certificate of    ML22098A292.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 14.
Proposed Renewed Certificate of    ML22098A293.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 14.
Proposed Renewed Certificate of    ML22098A294.
 Compliance No. 1014 Appendix A-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 14.
Proposed Renewed Certificate of    ML22098A295.
 Compliance No. 1014 Appendix B-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 14.
Proposed Renewed Certificate of    ML22098A296.
 Compliance No. 1014, Amendment
 No. 15.
Proposed Renewed Certificate of    ML22098A297.
 Compliance No. 1014 Appendix A:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 15.
Proposed Renewed Certificate of    ML22098A298.
 Compliance No. 1014 Appendix B:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 15.
Proposed Renewed Certificate of    ML22098A299.
 Compliance No. 1014 Appendix A-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 15.
Proposed Renewed Certificate of    ML22098A300.
 Compliance No. 1014 Appendix B-
 100U: Technical Specifications
 for the HI-STORM 100 Cask System
 Amendment No. 15.
Proposed Renewed Certificate of    ML22098A301.
 Compliance No. 1014 Appendix C:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 15.
Proposed Renewed Certificate of    ML22098A302.
 Compliance No. 1014 Appendix D:
 Technical Specifications for the
 HI-STORM 100 Cask System
 Amendment No. 15.
------------------------------------------------------------------------
                  Preliminary Safety Evaluation Report
------------------------------------------------------------------------
Preliminary Safety Evaluation      ML22098A303.
 Report for the HI-STORM 100 Cask
 System: Certificate of
 Compliance No. 1014 Renewal
 Docket No. 72[dash]1014.
------------------------------------------------------------------------
                         Environmental Documents
------------------------------------------------------------------------
Environmental Assessment for       ML051230231.
 Proposed Rule Entitled,
 ``Storage of Spent Nuclear Fuel
 in NRC-Approved Storage Casks at
 Nuclear Power Reactor Sites.''
 (1989).
``Environmental Assessment for     ML091060766.
 the Holtec International HI-
 STORM 100U Underground Cask
 System'' (2009).
``Environmental Assessment and     ML100710441.
 Finding of No Significant Impact
 for the Final Rule Amending 10
 CFR Part 72 License and
 Certificate of Compliance
 Terms'' (2010).
Generic Environmental Impact       ML14198A440 (package).
 Statement for Continued Storage
 of Spent Nuclear Fuel: Final
 Report (NUREG-2157, Volumes 1
 and 2) (2014).
``Storage of Spent Fuel In NRC-    55 FR 29181.
 Approved Storage Casks at Power
 Reactor Sites'' Final Rule (July
 18, 1990).
``List of Approved Spent Fuel      74 FR 52387.
 Storage Casks: HI-STORM 100
 Revision 7'' (October 13, 2009).
``License and Certificate of       76 FR 8876.
 Compliance Terms'' (February 16,
 2011).
------------------------------------------------------------------------
    Holtec International, HI-STORM 100 Renewal Application Documents
------------------------------------------------------------------------
``Holtec International HI-STORM    ML20049A081 (package).
 100 Storage Certificate of
 Compliance Renewal
 Application.'' Holtec Letter
 5014890.
``Holtec International, Submittal  ML20290A819 (package).
 of RAI Responses on HI-STORM 100
 License Renewal.'' Holtec Letter
 5014911.
``Holtec International, Submittal  ML20303A254 (package).
 of RAI Responses on HI-STORM 100
 License Renewal [submittal of
 report HI-2002396, Revision
 5].'' Holtec Letter 5014912.
``Holtec International, Submittal  ML21109A367 (package).
 of RAI Clarification Responses
 on HI-STORM 100 License
 Renewal.'' Holtec Letter 5014922.
``Holtec International, Submittal  ML21113A201 (package).
 of RAI Clarification Responses
 on HI-STORM 100 License Renewal--
 Updated Attachment.'' Holtec
 Letter 5014923.
Certificate of Compliance Renewal  ML21113A203.
 Application for the HI-STORM 100
 Dry Storage System: Certificate
 of Compliance No. 1014, Docket
 Number 72-1014.
------------------------------------------------------------------------
    Holtec International, HI-STORM 100 Final Safety Analysis Reports
------------------------------------------------------------------------
``Final Safety Analysis Report     ML19150A405.
 for the HI-STORM 100 Cask
 System.'' HI[dash]2002444,
 Revision 18. (non-proprietary)
 (May 2019).
``Final Safety Analysis Report     ML20121A317.
 for the HI-STORM 100 Cask
 System.'' HI[dash]2002444,
 Revision 19. (non-proprietary)
 (April 2020).
``Final Safety Analysis Report     ML20167A018.
 for the HI-STORM 100 Cask
 System.'' HI[dash]2002444,
 Revision 20. (non-proprietary)
 (June 2020).
------------------------------------------------------------------------

[[Page 9199]]

 
                             Other Documents
------------------------------------------------------------------------
``Standard Review Plan for         ML16179A148.
 Renewal of Specific Licenses and
 Certificates of Compliance for
 Dry Storage of Spent Nuclear
 Fuel.'' NUREG-1927, Revision 1.
 Washington, DC. June 2016.
``Managing Aging Processes in      ML19214A111.
 Storage (MAPS) Report.'' Final
 Report. NUREG[dash]2214.
 Washington, DC. July 2019.
``General License for Storage of   55 FR 29181.
 Spent Fuel at Power Reactor
 Sites'' (July 18, 1990).
``List of Approved Spent Fuel      65 FR 25241.
 Storage Casks: Holtec HI-STORM
 100 Addition'' (May 1, 2000).
``License and Certificate of       76 FR 8872.
 Compliance Terms'' (February 16,
 2011).
``Agreement State Program Policy   82 FR 48535.
 Statement; Correction'' (October
 18, 2017).
Nuclear Energy Institute NEI 14-   ML16356A210.
 03, Revision 2, ``Format,
 Content and Implementation
 Guidance for Dry Cask Storage
 Operations-Based Aging
 Management,'' (2016).
Regulatory Guide 3.76, Revision    ML21098A022.
 0, ``Implementation of Aging
 Management Requirements for
 Spent Fuel Storage Renewals.''
 July 2021.
------------------------------------------------------------------------

    The NRC may post materials related to this document, including 
public comments, on the Federal rulemaking website at https://www.regulations.gov under Docket ID NRC-2022-0109.

    Dated: January 31, 2023.

    For the Nuclear Regulatory Commission.
Catherine Haney,
Acting Executive Director for Operations.
[FR Doc. 2023-03003 Filed 2-10-23; 8:45 am]
BILLING CODE 7590-01-P