[Federal Register Volume 87, Number 216 (Wednesday, November 9, 2022)]
[Notices]
[Pages 67717-67718]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-24445]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2010-0037]


Standard for Welding, Cutting, and Brazing; Extension of the 
Office of Management and Budget's (OMB) Approval of Information 
Collection (Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning the proposal to 
extend the Office of Management and Budget's (OMB) approval of the 
information collection requirements specified in the Standard for 
Welding, Cutting, and Brazing.

DATES: Comments must be submitted (postmarked, sent, or received) by 
January 9, 2023.

ADDRESSES: 
    Electronically: You may submit comments and attachments 
electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov. Documents in the docket are 
listed in the http://www.regulations.gov index; however, some 
information (e.g., copyrighted material) is not publicly available to 
read or download through the website. All submissions, including 
copyrighted material, are available for inspection through the OSHA 
Docket Office. Contact the OSHA Docket Office at (202) 693-2350, (TTY 
(877) 889-5627) for assistance in locating docket submissions.
    Instructions: All submissions must include the agency name and OSHA 
docket number (OSHA-2010-0037) for the Information Collection Request 
(ICR). OSHA will place all comments, including any personal 
information, in the public docket, which may be made available online. 
Therefore, OSHA cautions interested parties about submitting personal 
information such as social security numbers and birthdates. For further 
information on submitting comments, see the ``Public Participation'' 
heading in the section of this notice titled SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT: Seleda Perryman or Theda Kenney, 
Directorate of Standards and Guidance, OSHA, U.S. Department of Labor; 
telephone (202) 693-2222.

SUPPLEMENTARY INFORMATION: 

I. Background

    The Department of Labor, as part of the continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accordance with the Paperwork Reduction Act 
of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that 
information is in the desired format, reporting burden (time and costs) 
is minimal, the collection instruments are clearly understood, and 
OSHA's estimate of the information collection burden is accurate. The 
Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651 et 
seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the OSH Act or for developing 
information regarding the causes and prevention of occupational 
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also 
requires that OSHA obtain such information with minimum burden upon 
employers, especially those operating small businesses, and to reduce 
to the maximum extent feasible unnecessary duplication of effort in 
obtaining information (29 U.S.C. 657).
    The following sections describe who uses the information collected 
under each requirement, as well as how they use it. The purpose of 
these requirements is to reduce employees' risk of death or serious 
injury by ensuring that employment has been tested and is in safe 
operating condition.
    Section 1910.255(e) requires that a periodic inspection of 
resistance welding equipment be made by qualified maintenance 
personnel, and that a certification record be generated and maintained. 
The certification shall include the date of the inspection, the 
signature of the person who performed the inspection and the serial 
number, or other identifier, for the equipment inspected. The record 
shall be made available to an OSHA inspector upon request. The 
maintenance inspection ensures that welding equipment is in safe 
operating condition while the maintenance record provides evidence to 
workers and agency compliance officers that employers performed the 
required inspections.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the agency's functions to 
protect workers, including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection, and transmission techniques.

III. Proposed Actions

    The agency requests an adjustment decrease of 187 burden hours 
(from 5,806 burden hours to 5,619 burden hours) associated with the 
collections of information in the Welding, Cutting, and Brazing 
Standard. This adjustment decrease is a result of a decrease in the 
number of welders, cutters, solders, and brazers in general industry 
from 21,770 to 21,070 a difference of 700 welders, cutter, solders, and 
brazers in the previous package. The agency will summarize any comments 
submitted in response to this notice and will include this summary in 
its request to OMB.
    OSHA will summarize the comments submitted in response to this 
notice and will include this summary in the request to OMB to extend 
the approval of the information collection requirements.
    Type of Review: Extension of a currently approved collection.
    Title: The Standard for Welding, Cutting, and Brazing (29 CFR part 
1910, subpart Q).
    OMB Control Number: 1218-0207.
    Affected Public: Business or other for-profits.

[[Page 67718]]

    Number of Respondents: 21,070.
    Number of Responses: 84,280.
    Frequency of Responses: On occasion.
    Average Time per Response: Varies.
    Estimated Total Burden Hours: 5,619.
    Estimated Cost (Operation and Maintenance): $0.

IV. Public Participation--Submission of Comments on This Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. Please 
note: While OSHA's Docket Office is continuing to accept and process 
submissions by regular mail due to the COVID-19 pandemic, the Docket 
Office is closed to the public and not able to receive submissions to 
the docket by hand, express mail, messenger, and courier service. All 
comments, attachments, and other material must identify the agency name 
and the OSHA docket number for the ICR (Docket No. OSHA-2010-0037). You 
may supplement electronic submissions by uploading document files 
electronically. If you wish to mail additional materials in reference 
to an electronic or a facsimile submission, you must submit them to the 
OSHA Docket Office (see the section of this notice titled ADDRESSES). 
The additional materials must clearly identify your electronic comments 
by your name, date, and the docket number so that the agency can attach 
them to your comments.
    Due to security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments.
    Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as social security numbers and 
dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download from this 
website. All submissions, including copyrighted material, are available 
for inspection and copying at the OSHA Docket Office. Information on 
using the http://www.regulations.gov website to submit comments and 
access the docket is available at the website's ``User Tips'' link. 
Contact the OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627) 
for information about materials not available from the website, and for 
assistance in using the internet to locate docket submissions.

V. Authority and Signature

    James S. Frederick, Deputy Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 8-2020 
(85 FR 58393).

James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2022-24445 Filed 11-8-22; 8:45 am]
BILLING CODE 4510-26-P