[Federal Register Volume 87, Number 210 (Tuesday, November 1, 2022)]
[Notices]
[Pages 65819-65822]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-23681]


=======================================================================
-----------------------------------------------------------------------

INTERNATIONAL TRADE COMMISSION

[Investigation Nos. 731-TA-865-867 (Fourth Review)]


Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and 
the Philippines; Institution of Five-Year Reviews

AGENCY: United States International Trade Commission.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Commission hereby gives notice that it has instituted 
reviews pursuant to the Tariff Act of 1930 (``the Act''), as amended, 
to determine whether revocation of the antidumping duty orders on 
stainless steel butt-weld pipe fittings from Italy, Malaysia, and the 
Philippines would be likely to lead to continuation or recurrence of 
material injury. Pursuant to the Act, interested parties are requested 
to respond to this notice by submitting the information specified below 
to the Commission.

[[Page 65820]]


DATES: Instituted November 1, 2022. To be assured of consideration, the 
deadline for responses is December 1, 2022. Comments on the adequacy of 
responses may be filed with the Commission by January 17, 2023.

FOR FURTHER INFORMATION CONTACT: Caitlyn Hendricks (202-205-2058), 
Office of Investigations, U.S. International Trade Commission, 500 E 
Street SW, Washington, DC 20436. Hearing-impaired persons can obtain 
information on this matter by contacting the Commission's TDD terminal 
on 202-205-1810. Persons with mobility impairments who will need 
special assistance in gaining access to the Commission should contact 
the Office of the Secretary at 202-205-2000. General information 
concerning the Commission may also be obtained by accessing its 
internet server (https://www.usitc.gov). The public record for this 
proceeding may be viewed on the Commission's electronic docket (EDIS) 
at https://edis.usitc.gov.

SUPPLEMENTARY INFORMATION: 
    Background.--On February 23, 2001, the Department of Commerce 
(``Commerce'') issued antidumping duty orders on imports of stainless 
steel butt-weld pipe fittings from Italy, Malaysia, and the Philippines 
(66 FR 11257). Commerce issued a continuation of the antidumping duty 
orders on stainless steel butt-weld pipe fittings from Italy, Malaysia, 
and the Philippines following Commerce's and the Commission's first 
five-year reviews, effective December 11, 2006 (71 FR 71530), second 
five-year reviews, effective July 20, 2012 (77 FR 42697), and third 
five-year reviews, effective December 29, 2017 (82 FR 61751). The 
Commission is now conducting fourth reviews pursuant to section 751(c) 
of the Act, as amended (19 U.S.C. 1675(c)), to determine whether 
revocation of the orders would be likely to lead to continuation or 
recurrence of material injury to the domestic industry within a 
reasonably foreseeable time. Provisions concerning the conduct of this 
proceeding may be found in the Commission's Rules of Practice and 
Procedure at 19 CFR part 201, subparts A and B, and 19 CFR part 207, 
subparts A and F. The Commission will assess the adequacy of interested 
party responses to this notice of institution to determine whether to 
conduct full or expedited reviews. The Commission's determinations in 
any expedited reviews will be based on the facts available, which may 
include information provided in response to this notice.
    Definitions.--The following definitions apply to these reviews:
    (1) Subject Merchandise is the class or kind of merchandise that is 
within the scope of the five-year reviews, as defined by the Department 
of Commerce.
    (2) The Subject Countries in these reviews are Italy, Malaysia, and 
the Philippines.
    (3) The Domestic Like Product is the domestically produced product 
or products which are like, or in the absence of like, most similar in 
characteristics and uses with, the Subject Merchandise. In its original 
determinations, its full first five-year review determinations, and its 
expedited second and third five-year review determinations, the 
Commission defined the Domestic Like Product as all stainless steel 
butt-weld pipe fittings coextensive with Commerce's scope.
    (4) The Domestic Industry is the U.S. producers as a whole of the 
Domestic Like Product, or those producers whose collective output of 
the Domestic Like Product constitutes a major proportion of the total 
domestic production of the product. In its original determinations, the 
Commission defined the Domestic Industry as all domestic producers of 
finished and unfinished butt-weld fittings having an outside diameter 
(based on nominal pipe size) of less than 14 inches, although one 
domestic producer was excluded from the Domestic Industry under the 
related parties provision. In its full first five-year review 
determinations and its expedited second five-year review 
determinations, the Commission defined the Domestic Industry as all 
domestic producers of stainless steel butt-weld pipe fittings. In its 
expedited third five-year review determinations, the Commission defined 
the Domestic Industry as all domestic producers of finished and 
unfinished butt-weld fittings having an outside diameter (based on 
nominal pipe size) of less than 14 inches.
    (5) An Importer is any person or firm engaged, either directly or 
through a parent company or subsidiary, in importing the Subject 
Merchandise into the United States from a foreign manufacturer or 
through its selling agent.
    Participation in the proceeding and public service list.--Persons, 
including industrial users of the Subject Merchandise and, if the 
merchandise is sold at the retail level, representative consumer 
organizations, wishing to participate in the proceeding as parties must 
file an entry of appearance with the Secretary to the Commission, as 
provided in Sec.  201.11(b)(4) of the Commission's rules, no later than 
21 days after publication of this notice in the Federal Register. The 
Secretary will maintain a public service list containing the names and 
addresses of all persons, or their representatives, who are parties to 
the proceeding.
    Former Commission employees who are seeking to appear in Commission 
five-year reviews are advised that they may appear in a review even if 
they participated personally and substantially in the corresponding 
underlying original investigation or an earlier review of the same 
underlying investigation. The Commission's designated agency ethics 
official has advised that a five-year review is not the same particular 
matter as the underlying original investigation, and a five-year review 
is not the same particular matter as an earlier review of the same 
underlying investigation for purposes of 18 U.S.C. 207, the post-
employment statute for Federal employees, and Commission rule 201.15(b) 
(19 CFR 201.15(b)), 79 FR 3246 (Jan. 17, 2014), 73 FR 24609 (May 5, 
2008). Consequently, former employees are not required to seek 
Commission approval to appear in a review under Commission rule 19 CFR 
201.15, even if the corresponding underlying original investigation or 
an earlier review of the same underlying investigation was pending when 
they were Commission employees. For further ethics advice on this 
matter, contact Charles Smith, Office of the General Counsel, at 202-
205-3408.
    Limited disclosure of business proprietary information (BPI) under 
an administrative protective order (APO) and APO service list.--
Pursuant to Sec.  207.7(a) of the Commission's rules, the Secretary 
will make BPI submitted in this proceeding available to authorized 
applicants under the APO issued in the proceeding, provided that the 
application is made no later than 21 days after publication of this 
notice in the Federal Register. Authorized applicants must represent 
interested parties, as defined in 19 U.S.C. 1677(9), who are parties to 
the proceeding. A separate service list will be maintained by the 
Secretary for those parties authorized to receive BPI under the APO.
    Certification.--Pursuant to Sec.  207.3 of the Commission's rules, 
any person submitting information to the Commission in connection with 
this proceeding must certify that the information is accurate and 
complete to the best of the submitter's knowledge. In making the 
certification, the submitter will acknowledge that information 
submitted in response to this request for information and throughout 
this proceeding or other proceeding may be

[[Page 65821]]

disclosed to and used: (i) by the Commission, its employees and 
Offices, and contract personnel (a) for developing or maintaining the 
records of this or a related proceeding, or (b) in internal 
investigations, audits, reviews, and evaluations relating to the 
programs, personnel, and operations of the Commission including under 5 
U.S.C. Appendix 3; or (ii) by U.S. government employees and contract 
personnel, solely for cybersecurity purposes. All contract personnel 
will sign appropriate nondisclosure agreements.
    Written submissions.--Pursuant to Sec.  207.61 of the Commission's 
rules, each interested party response to this notice must provide the 
information specified below. The deadline for filing such responses is 
December 1, 2022. Pursuant to Sec.  207.62(b) of the Commission's 
rules, eligible parties (as specified in Commission rule 207.62(b)(1)) 
may also file comments concerning the adequacy of responses to the 
notice of institution and whether the Commission should conduct 
expedited or full reviews. The deadline for filing such comments is 
January 17, 2023. All written submissions must conform with the 
provisions of Sec.  201.8 of the Commission's rules; any submissions 
that contain BPI must also conform with the requirements of Sec. Sec.  
201.6, 207.3, and 207.7 of the Commission's rules. The Commission's 
Handbook on Filing Procedures, available on the Commission's website at 
https://www.usitc.gov/documents/handbook_on_filing_procedures.pdf, 
elaborates upon the Commission's procedures with respect to filings. 
Also, in accordance with Sec. Sec.  201.16(c) and 207.3 of the 
Commission's rules, each document filed by a party to the proceeding 
must be served on all other parties to the proceeding (as identified by 
either the public or APO service list as appropriate), and a 
certificate of service must accompany the document (if you are not a 
party to the proceeding you do not need to serve your response).
    Please note the Secretary's Office will accept only electronic 
filings at this time. Filings must be made through the Commission's 
Electronic Document Information System (EDIS, https://edis.usitc.gov). 
No in-person paper-based filings or paper copies of any electronic 
filings will be accepted until further notice.
    No response to this request for information is required if a 
currently valid Office of Management and Budget (``OMB'') number is not 
displayed; the OMB number is 3117 0016/USITC No. 22-5-546, expiration 
date June 30, 2023. Public reporting burden for the request is 
estimated to average 15 hours per response. Please send comments 
regarding the accuracy of this burden estimate to the Office of 
Investigations, U.S. International Trade Commission, 500 E Street SW, 
Washington, DC 20436.
    Inability to provide requested information.--Pursuant to Sec.  
207.61(c) of the Commission's rules, any interested party that cannot 
furnish the information requested by this notice in the requested form 
and manner shall notify the Commission at the earliest possible time, 
provide a full explanation of why it cannot provide the requested 
information, and indicate alternative forms in which it can provide 
equivalent information. If an interested party does not provide this 
notification (or the Commission finds the explanation provided in the 
notification inadequate) and fails to provide a complete response to 
this notice, the Commission may take an adverse inference against the 
party pursuant to Sec.  776(b) of the Act (19 U.S.C. 1677e(b)) in 
making its determinations in the reviews.
    Information to be Provided in Response to this Notice of 
Institution: If you are a domestic producer, union/worker group, or 
trade/business association; import/export Subject Merchandise from more 
than one Subject Country; or produce Subject Merchandise in more than 
one Subject Country, you may file a single response. If you do so, 
please ensure that your response to each question includes the 
information requested for each pertinent Subject Country. As used 
below, the term ``firm'' includes any related firms.
    Those responding to this notice of institution are encouraged, but 
not required, to visit the USITC's website for this proceeding at 
https://www.usitc.gov/investigations/701731/2022/stainless_steel_butt_weld_pipe_fittings_italy/adequacy.htm and download 
and complete the ``NOI worksheet'' Excel form, to be included as 
attachment/exhibit 1 of your overall response.
    (1) The name and address of your firm or entity (including World 
Wide Web address) and name, telephone number, fax number, and Email 
address of the certifying official.
    (2) A statement indicating whether your firm/entity is an 
interested party under 19 U.S.C. 1677(9) and if so, how, including 
whether your firm/entity is a U.S. producer of the Domestic Like 
Product, a U.S. union or worker group, a U.S. importer of the Subject 
Merchandise, a foreign producer or exporter of the Subject Merchandise, 
a U.S. or foreign trade or business association (a majority of whose 
members are interested parties under the statute), or another 
interested party (including an explanation). If you are a union/worker 
group or trade/business association, identify the firms in which your 
workers are employed or which are members of your association.
    (3) A statement indicating whether your firm/entity is willing to 
participate in this proceeding by providing information requested by 
the Commission.
    (4) A statement of the likely effects of the revocation of the 
antidumping duty orders on the Domestic Industry in general and/or your 
firm/entity specifically. In your response, please discuss the various 
factors specified in section 752(a) of the Act (19 U.S.C. 1675a(a)) 
including the likely volume of subject imports, likely price effects of 
subject imports, and likely impact of imports of Subject Merchandise on 
the Domestic Industry.
    (5) A list of all known and currently operating U.S. producers of 
the Domestic Like Product. Identify any known related parties and the 
nature of the relationship as defined in Sec.  771(4)(B) of the Act (19 
U.S.C. 1677(4)(B)).
    (6) A list of all known and currently operating U.S. importers of 
the Subject Merchandise and producers of the Subject Merchandise in 
each Subject Country that currently export or have exported Subject 
Merchandise to the United States or other countries after 2016.
    (7) A list of 3-5 leading purchasers in the U.S. market for the 
Domestic Like Product and the Subject Merchandise (including street 
address, World Wide Web address, and the name, telephone number, fax 
number, and Email address of a responsible official at each firm).
    (8) A list of known sources of information on national or regional 
prices for the Domestic Like Product or the Subject Merchandise in the 
U.S. or other markets.
    (9) If you are a U.S. producer of the Domestic Like Product, 
provide the following information on your firm's operations on that 
product during calendar year 2021, except as noted (report quantity 
data in pounds and value data in U.S. dollars, f.o.b. plant). If you 
are a union/worker group or trade/business association, provide the 
information, on an aggregate basis, for the firms in which your workers 
are employed/which are members of your association.
    (a) Production (quantity) and, if known, an estimate of the 
percentage of total U.S. production of the Domestic

[[Page 65822]]

Like Product accounted for by your firm's(s') production;
    (b) Capacity (quantity) of your firm to produce the Domestic Like 
Product (that is, the level of production that your establishment(s) 
could reasonably have expected to attain during the year, assuming 
normal operating conditions (using equipment and machinery in place and 
ready to operate), normal operating levels (hours per week/weeks per 
year), time for downtime, maintenance, repair, and cleanup, and a 
typical or representative product mix);
    (c) the quantity and value of U.S. commercial shipments of the 
Domestic Like Product produced in your U.S. plant(s);
    (d) the quantity and value of U.S. internal consumption/company 
transfers of the Domestic Like Product produced in your U.S. plant(s); 
and
    (e) the value of (i) net sales, (ii) cost of goods sold (COGS), 
(iii) gross profit, (iv) selling, general and administrative (SG&A) 
expenses, and (v) operating income of the Domestic Like Product 
produced in your U.S. plant(s) (include both U.S. and export commercial 
sales, internal consumption, and company transfers) for your most 
recently completed fiscal year (identify the date on which your fiscal 
year ends).
    (10) If you are a U.S. importer or a trade/business association of 
U.S. importers of the Subject Merchandise from any Subject Country, 
provide the following information on your firm's(s') operations on that 
product during calendar year 2021 (report quantity data in pounds and 
value data in U.S. dollars). If you are a trade/business association, 
provide the information, on an aggregate basis, for the firms which are 
members of your association.
    (a) The quantity and value (landed, duty-paid but not including 
antidumping or countervailing duties) of U.S. imports and, if known, an 
estimate of the percentage of total U.S. imports of Subject Merchandise 
from each Subject Country accounted for by your firm's(s') imports;
    (b) the quantity and value (f.o.b. U.S. port, including antidumping 
and/or countervailing duties) of U.S. commercial shipments of Subject 
Merchandise imported from each Subject Country; and
    (c) the quantity and value (f.o.b. U.S. port, including antidumping 
and/or countervailing duties) of U.S. internal consumption/company 
transfers of Subject Merchandise imported from each Subject Country.
    (11) If you are a producer, an exporter, or a trade/business 
association of producers or exporters of the Subject Merchandise in any 
Subject Country, provide the following information on your firm's(s') 
operations on that product during calendar year 2021 (report quantity 
data in pounds and value data in U.S. dollars, landed and duty-paid at 
the U.S. port but not including antidumping or countervailing duties). 
If you are a trade/business association, provide the information, on an 
aggregate basis, for the firms which are members of your association.
    (a) Production (quantity) and, if known, an estimate of the 
percentage of total production of Subject Merchandise in each Subject 
Country accounted for by your firm's(s') production;
    (b) Capacity (quantity) of your firm(s) to produce the Subject 
Merchandise in each Subject Country (that is, the level of production 
that your establishment(s) could reasonably have expected to attain 
during the year, assuming normal operating conditions (using equipment 
and machinery in place and ready to operate), normal operating levels 
(hours per week/weeks per year), time for downtime, maintenance, 
repair, and cleanup, and a typical or representative product mix); and
    (c) the quantity and value of your firm's(s') exports to the United 
States of Subject Merchandise and, if known, an estimate of the 
percentage of total exports to the United States of Subject Merchandise 
from each Subject Country accounted for by your firm's(s') exports.
    (12) Identify significant changes, if any, in the supply and demand 
conditions or business cycle for the Domestic Like Product that have 
occurred in the United States or in the market for the Subject 
Merchandise in each Subject Country after 2016, and significant 
changes, if any, that are likely to occur within a reasonably 
foreseeable time. Supply conditions to consider include technology; 
production methods; development efforts; ability to increase production 
(including the shift of production facilities used for other products 
and the use, cost, or availability of major inputs into production); 
and factors related to the ability to shift supply among different 
national markets (including barriers to importation in foreign markets 
or changes in market demand abroad). Demand conditions to consider 
include end uses and applications; the existence and availability of 
substitute products; and the level of competition among the Domestic 
Like Product produced in the United States, Subject Merchandise 
produced in each Subject Country, and such merchandise from other 
countries.
    (13) (Optional) A statement of whether you agree with the above 
definitions of the Domestic Like Product and Domestic Industry; if you 
disagree with either or both of these definitions, please explain why 
and provide alternative definitions.
    Authority: This proceeding is being conducted under authority of 
title VII of the Tariff Act of 1930; this notice is published pursuant 
to Sec.  207.61 of the Commission's rules.

    By order of the Commission.

    Issued: October 26, 2022.
Katherine Hiner,
Acting Secretary to the Commission.
[FR Doc. 2022-23681 Filed 10-31-22; 8:45 am]
BILLING CODE 7020-02-P