[Federal Register Volume 87, Number 199 (Monday, October 17, 2022)]
[Notices]
[Pages 62787-62790]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-22438]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-47-2022]
Foreign-Trade Zone (FTZ) 72--Indianapolis, Indiana, Notification
of Proposed Production Activity, Mercury Marine (Marine Service,
Repair, Winterization, or Replacement Kits), Brownsburg, Indiana
Mercury Marine submitted a notification of proposed production
activity to the FTZ Board (the Board) for its facility in Brownsburg,
Indiana, within FTZ 72. The notification
[[Page 62788]]
conforming to the requirements of the Board's regulations (15 CFR
400.22) was received on October 4, 2022.
Pursuant to 15 CFR 400.14(b), FTZ production activity would be
limited to the specific foreign-status material(s)/component(s) and
specific finished product(s) described in the submitted notification
(summarized below) and subsequently authorized by the Board. The
benefits that may stem from conducting production activity under FTZ
procedures are explained in the background section of the Board's
website--accessible via www.trade.gov/ftz.
The proposed finished products include: kits for marine engines
(catalyst-exhaust pack; hydraulic fluid power pump; tubing; cover;
heater; housing kits used in water heaters; for filtering or purifying
water; seal; drive hub); kits of rigid tubes, pipes, hoses, or fittings
(of polymers of ethylene; of plastics); kits of tubes, pipes, hoses, or
fittings, of polymers of propylene; kits of tubes, pipes, or hoses (of
plastic; of plastic, with fittings and non-reinforced; of non-
reinforced vulcanized rubber; of textile reinforced vulcanized rubber;
with fittings, of textile reinforced vulcanized rubber); kits of non-
rigid plastic tubes, pipes, or hoses, reinforced with metal or PVC;
repair kits (of plastic fittings; of vulcanized rubber gaskets,
washers, seals, grommets, or mounts; of connectors for electrical
circuits); sets and kits of decals for labeling; air deck kits, tube
kits, trailering lock kits, of plastic; kits of reinforced vulcanized
rubber tubes, pipes, or hoses, with fittings; kits of metal reinforced
vulcanized rubber tubes, pipes, or hoses, with fittings; kits of
reinforced rubber hose assemblies, with fittings; kits of reinforced
rubber hose assemblies; kits of endless transmission belts of
trapezoidal cross section V-belts, V-ribbed, not exceeding 180 cm; kits
of transmission belts or belting, of vulcanized rubber; bow bag kits;
kits of plywood, veneered panels, or laminated wood; kits of paper
brochures or instruction manuals; kits of repair manuals, repair
instruction sheets, brochures, leaflets, or printed matter; replacement
kits (of twine, cordage, ropes, or cables, of synthetic fibers; of
plugs or sockets; of cushions for marine use); gasket maintenance or
repair kits; kits of tubes, pipes, or hollow profiles, of seamless
alloy steel; kits of circular cross section tubes, pipes, or hollow
profiles (of welded stainless steel; of welded alloy steel); kits of
bends, sleeves, or threaded elbows (of stainless steel; of iron or
steel); kits of drain fit assemblies or fittings for stainless steel
tubes and pipes; kits of tube or pipe fittings (of iron or steel; of
aluminum alloys); connector kits of stranded wire, ropes, or cables, of
iron or steel, not electrically insulated; safety latch repair kits for
timing or roller chains, of iron or steel; kits of screws, seals,
springs, threaded screws and bolts, rod-links, bushings, nuts, non-
threaded washers, rivets, non-threaded cotters or cotter pins, of iron
or steel; starter drive repair kits of threaded nuts, of iron or steel;
propeller hardware kits of non-threaded spring washers or lock washers,
of iron or steel; kits of pins, rings, or clips, of iron or steel, non-
threaded; remote control repair kits (of helical springs, of iron or
steel; of springs or leaves for springs, of iron or steel); ratchet
repair kits, drain plug kits, tilt lock lever kits, spacer kits, band
kits, plate kits, clamp kits, coupler kits, bushing kits, pin kits, or
rod end kits for marine engines, of iron or steel; water tube kits of
refined copper tubes or pipes; tube seal kits of copper alloy tubes or
pipes; connection kits or fitting assembly kits, of copper alloys; kits
of non-threaded washers, prop nuts, screws, bolts, of copper, iron, or
steel, with heads of copper; bushing repair kits, of copper; kits of
screws, bolts, nuts, washers, of aluminum; service kits of anodes and
drain tubes, of aluminum; kits of anodes and anode plates, of zinc;
water hose repair kits; kits of hand tools; kits of vices; kits of
clamps; kits of tiebars; kits of clamp brackets; kits of plate
assemblies; kits of power trim; kits of swivel brackets; kits of base
metal mountings; repair kits (for bracket mountings, of base metal; for
marine engine pumps for both water and fuel; for needle roller
bearings; for cylindrical roller bearings; for prop shafts, shift
shafts, transmission shafts, or cranks; for lower unit bearing carriers
or housed bearings; for bearing housings; for gears or bearings; for
clutch lower units, gear lower units, or shaft couplings; for
transmissions, coils, gear sets, shift rods, flywheels, control levers,
or clutches; for gaskets or joints, of metal sheeting, combined with
one or two more layers of metal; for rotary converters for electric
motors or electric generating sets; for starters, motors, and dual
purpose starter generators; for shafts, covers, armatures, or end caps
for electrical ignition of marine motors; for valves, conversion kits,
gear shift kits, attaching kits, or spring kits for electrical
equipment; for coils, harnesses, rigging, cables, or ignition wiring
sets for marine vessels; for wiring or wiring assemblies fitted with
connectors); service repair kits, O-ring set kits, cylinder head kits,
cylinder block kits, transom kits, oil line kits, float needle kits,
steering attaching kits, throttle control kits, shift shaft kits, valve
intake kits, piston kits, tiller conversion kits, lever kits, cowl
kits, connecting rod kits, manifold kits, riser kits, or carburetor
kits for spark-ignition internal combustion piston engines; repower
kits; exhaust kits; shaft guard kits; power trim kits, overhaul kits,
or cylinder assembly trim kits for linear acting hydraulic power
engines or motors; jet pump kits for hydraulic power engines and
motors; bell housing kits; lever tilt stop kits; recoil starter kits
and assemblies; end cap kits, manifold kits, spring kits, overhaul
kits, handle kits, repair kits, gimbal ring kits, transom repair kits,
starter kits, bracket kits, shift cable kits, shift handle kits, or
extension arm kits for marine engines and motors; kits of pumps (hand;
grease; fuel; primer bulb; oil; bilge; aerator; hand- or foot-operated
air; air; vacuum); water pump kits, pump repair kits, pump service
kits, fuel pump kits, and kits for lubricating or cooling pumps for
marine internal combustion piston engines; kits of centrifugal pumps
for liquids; impeller kits; vapor separator kits; housing kits; seal
kits; kits of turbo chargers for engines; compressor or turbo kits for
air or vacuum pumps; kits of heat exchanger units; kits of heat
exchanger assemblies; separator kits, filter kits, service kits, oil or
fuel filter kits, and intake air filter kits for internal combustion
engines; kits for filtering or purifying hydraulic fuel and separating
oil, and water or air filtering kits for marine engines and equipment;
vessel view kits; automatic data processing machine kits; kits of
valves (for oleohydraulic or pneumatic transmissions; water; check
(nonreturn); safety; relief); float valve kits, regulator kits,
throttle body kits, injector kits, solenoid kits, diaphragm kits,
needle valve kits, purge vent kits, or thermostatic control valve kits
for marine engine pipes and fuel tanks; repair kits, thermostat kits,
control valve kits, and valve kits for pipes and tanks; kits of
bearings (ball; tapered roller); bearing installation kits; kits of
flywheels or pulleys; gasket sets; gearcase seal kits; joint kits of
metal sheeting; kits of propellers; kits of electric motors and
generators, with an output not exceeding 37.5W; tilt repair kits or
trim repair kits for shift actuators and DC electric motors or
generators with an output not exceeding 750W; charging kits; static
converter kits; electromagnet kits; service kits for spark plugs;
flywheel kits; ignition magneto kits; magneto-dynamo kits; magnetic
flywheel kits; kits of distributors; kits of ignition coils; alternator
kits; generator kits; voltage regulator kits, relay kits or
[[Page 62789]]
voltage-current regulator kits with cut-out relays; kits of
transmission equipment or voice, image, or data reception equipment for
communication in a wire or wireless network; kits of GPS unit or radio
navigational aid equipment; monitor kits or indicator panel kits with
LCDs or LEDs; horn kits, lamp kits, or electric sound or visual
signaling equipment kits; trim sender kits; variable resistor kits;
fuse kits; automatic circuit breaker kits; kits of relays, for a
voltage not exceeding 60V; relay kits; switch kits to switch or protect
electrical circuits; kits of boards, panels or consoles for electric
control or distribution of electricity; shim kits, fuse block holder
kits, rigging kits, or kits of electrical equipment for switching or
protecting electrical circuits, boards, or panels; kits of diodes, not
photosensitive or light-emitting; anode kits for electroplating a
marine engine to prevent corrosion; handle kits; throttle kits; helm
kits; conversion kits; electric control unit kits; kits of electrical
insulators for wire harnesses; kits of plastic insulating fittings;
kits of thermometers or pyrometers; lube bottle kits, dip stick kits,
oil gauge kits, or kits of instruments and equipment for measuring or
checking the flow or level of liquids; sensor kits, oil pressure kits,
or kits of instruments and equipment for measuring or checking pressure
of liquids or gases; gauge kits, sensor kits, or kits of instruments
and equipment for measuring and checking flow level and pressure of
liquids or gases; pressure kits, float kits, shaft kits, bezel kits, or
kits of instruments and equipment for measuring flow level or pressure
of liquids or gases; tachometer kits; speedometer kits; stroboscope
kits; speedometer pickup kits; tachometer module kits; bezel gauge kits
for revolution counters; production counter kits; odometer kits; kits
of instruments and equipment for measuring and checking voltage,
current, resistance, or power; crank position sensor kits, level kits,
voltage gauge kits, or current sensor kits for marine engine
instruments; trim sensor kits, monitor kits, sensor kits, or indicator
kits for measuring or checking marine engine performance; thermostat
kits; automatic regulating or controlling kits for marine engine
instrument and equipment performance; rotor kits or housing kits for
automatic regulating or controlling marine engine instrument and
equipment performance; kits of seats (with wooden frames; with frames
not of metal, wood, or bamboo); and, plastic furniture kits (duty rate
ranges from duty-free to 9.9%).
The proposed foreign-status materials and components include:
prepared glues and prepared adhesives based of rubber or plastic
(including artificial resins); catalysts for marine engines; rigid
tubes, pipes, hoses, or fittings (of polymers of ethylene; of
plastics); tubes, pipes, or hoses (of plastic; of plastic, with
fittings); non-rigid tubes, pipes, or hoses, of plastic, reinforced
with metal or PVC; plastic components (fittings; self-adhesive labels;
sheet, strip, or film; stoppers; lids; caps; closures; emblems or
ornaments for boats; gaskets; covers; inserts; clamps; clips; bushings;
washers; plugs; insulating fittings; seats with frames; furniture);
sacks and bags (of polymers of ethylene; of plastics, not polymers of
ethylene); plates, sheet, strip, and profile shapes of vulcanized,
noncellular rubber; non-reinforced vulcanized rubber tubes, pipes, or
hoses (with or without fittings); reinforced vulcanized rubber tubes,
pipes, or hoses, with fittings; metal reinforced vulcanized rubber
tubes, pipes, or hoses, with fittings; textile reinforced vulcanized
rubber tubes, pipes, or hoses (with or without fittings); reinforced
rubber hose assemblies (with or without fittings); vulcanized rubber
components (endless transmission belts of trapezoidal cross section V-
belts (V-ribbed, not exceeding 180 cm; not V-ribbed, not exceeding 180
cm; not V-ribbed, of an outside circumference exceeding 180 cm but not
exceeding 240 cm); transmission belts, belting, or endless synchronous
belts, with an outside circumference exceeding 60 cm but not exceeding
150 cm; transmission belts or belting; gaskets; washers; seals; plugs;
grommets; mounts; fittings; O-rings; bushings); belonging bags or
sacks, with an outer surface of plastic sheeting; plywood; veneered
panels; laminated wood; paper or paperboard, cut to size or shape;
printed books, brochures, leaflets, or printed matter; twine, starter
rope, safety rope, cordage, ropes, or cables, of synthetic fibers;
gaskets, of carbon fibers; tubes, pipes, or hollow profiles, of
seamless alloy steel; welded circular cross sections of tubes, pipes,
or hollow profiles (of stainless steel; of alloy steel); stainless
steel components (threaded elbows; bends; sleeves; tube or pipe
fittings); iron or steel components (threaded elbows; bends; sleeves;
tube or pipe fittings; stranded wire, ropes, or cables, not
electrically insulated; timing chains or roller chains; coach screws;
self-tapping screws; threaded screws, bolts, nuts, rods, and bushings;
non-threaded washers, spring washers, lock washers, cotters and cotter
pins, pins, rings, and clips; rivets; helical springs; springs or
leaves for springs; washers; clips; fittings; hooks; straps; spacers;
rings; bushings; plates); copper components (tubes or pipes (of refined
copper; of copper alloys); tube or pipe fittings, of copper alloys;
stranded wire or cables; plugs; clips; ends; retainers; bushings;
elbows; covers, plugs, connectors, plates, rings, caps, holders, or
housings for electrical equipment for switching or protecting
electrical circuits boards or panels; winding wire); non-threaded
washers, pins, retaining rings, screws, bolts, or nuts of copper, iron,
or steel with heads of copper; aluminum components (tubes or pipes, of
aluminum alloys; tube or pipe fittings; screws; bolts; nuts; washers;
spacers; bushings; plates; sleeves; clamps; inserts; heads, collars,
nose cones, columns, or covers for electric motors or electric
generating sets and rotary converters); anodes, of zinc; hand-operated
spanners or wrenches (adjustable and non-adjustable); socket wrenches,
drives, or extensions; hand tools; base metal components (padlocks;
locks; mountings; bracket mountings or fixtures); components for marine
engines (powerheads; drives; transoms; valves; inserts; covers;
collars; plates; end caps; hydraulic fluid power pumps; turbo chargers;
water filtering strainers, purifying strainers, or screen struts;
housings; screens; filtering equipment; solenoids; triggers; plugs;
rotors; contact sets; rev limiters; starting equipment; carbon-film
fixed internal resistors; internal resistors); pistons, shift shafts,
shift levers, fuel bowls, throttle controls, levers, covers, retainers,
or shafts for spark-ignition internal combustion piston engines; linear
acting hydraulic power engines and motors; hydraulic power engines and
motors; recoil starters; blocks, link rods, actuators, covers, tubes,
pistons, or scrapers for marine engines and motors; various pumps
(hand; grease; fuel; primer bulb; oil; fuel, lubricating, or cooling
medium for internal combustion piston engines; centrifugal, bilge, or
aerator for liquids; hand- or foot- operated air; air; vacuum);
impellers, inserts, liners, bases, faceplates, shafts, or grommets for
marine engine pumps; shields, manifolds, compressors, adapters, or
restrictors for air or vacuum pumps; heat exchanger units; heat
exchanger assemblies; covers, plates, connections, or housings to
protect sections of a marine engine; filters for internal combustion
engines (oil; fuel; intake air); automatic data processing machines;
shock absorbers, handles, tillers, swivel brackets, or starters to
support the use of marine engines; tie rods; levers; pucks; plates;
pads; links;
[[Page 62790]]
handles of mounts; front or back mounts; various valves (pressure-
reducing; for oleohydraulic or pneumatic transmissions; check
(nonreturn); safety; relief); regulators, throttle bodies, solenoids,
purge vents, valves, floats, nozzles, dampers, covers, joints, or
brackets for pipes and tanks; steel components (ball bearings; tapered
roller bearings; spherical roller bearings; needle roller bearings;
cylindrical roller bearings; needles; rollers); tapered roller
bearings, ball bearing washers, thrust bearings, or bearing spacers, of
steel, aluminum, or plastic; transmission shafts, shift shafts, or
cranks; bearing carriers; housed bearings; bearing housings; gears or
gearing; flywheels; pulleys; clutches; shaft couplings; thrust rings,
drain plugs, flush plugs, control levers, gearcase covers, ideal
exhaust covers, shift arms, shift levers, forward gears, bevel gears,
joints, sprockets for transmission shafts, cranks, flywheels, clutches,
or shaft couplings, of copper, steel, or aluminum; gaskets or joints,
of metal sheeting; propellers, of stainless steel or aluminum; steel or
aluminum components (seals; fittings; thrust washers; hubs; shafts,
covers, armatures, end caps, clamps, pinions, or bushings for
electrical ignition or starting equipment); electric motors and
generators with an output not exceeding 37.5W; DC electric motors and
generators with an output not exceeding 75kW; static converters; spark
plugs; ignition magnetos; magneto-dynamos; magnetic flywheels;
distributors; ignition coils; starter motors or dual purpose starter
generators; generators; alternators; equipment for transmission or
reception of voice, images, or other data for communication in a wire
or wireless network; GPS units; radio navigational aid equipment;
antennas; antenna reflectors; indicator panels with LCDs or LEDs;
horns, buzzer, lamps, and equipment for electric sound or visual
signaling; dielectric electrical capacitors, of plastic or paper;
variable resistors; fuses; motor overload protectors; electrical
circuits protectors; relays, for a voltage not exceeding 60V; relays;
switches to switch or protect electrical circuits; lamp-holders; plugs;
sockets; equipment to switch circuits or circuit protectors; boards,
panels, or consoles for electric control or distribution of
electricity; electrical filament lamps, not ultraviolet or infrared;
diodes, not photosensitive or light-emitting; anode assemblies;
electrical control units or modules; covers, housings, gear shifts,
link rods, handles, joints, bezels, triggers, knobs, barrels, rollers,
racks, throttle levers, plates, carriers, levers, or pivots, of
electrical equipment for marine engines, of base metal or plastic;
ignition wiring sets or wiring sets for ships, vessels, or boats;
wiring assemblies fitted with connectors, not exceeding 1,000V;
electric conductors not fitted with connectors (not exceeding 1,000V;
exceeding 1,000V); electrical insulators; sensors, tri-ducers, live
scopes for ice fishing, GPS, sonar fish finders and underwater
navigational instruments; caps, bezels, port covers, gaskets, or doors
for compasses, navigational instruments and equipment, of plastic or
elastomers; thermometers; pyrometers; dip sticks; various gauges (fuel
level; oil level; oil pressure; water pressure; compression pressure;
trim); water flow detectors; gauges and sensors for measuring or
checking the flow, level, or pressure of liquids or gases; adaptors,
bezels, covers, or shafts, for measuring the flow, level, or pressure
of liquids or gases; speedometers; tachometers; stroboscopes;
mechanical senders, tachometers, bezels, odometers, or speedometers for
revolution counters or production counters; multimeters without a
recording device; voltmeters or battery voltage analyzers; crank
position sensors; laser levels; tip and tell sensors; gauges, sensors,
testers, probes, or indicators measuring or checking marine engine
performance; thermostats; temperature and map sensors for automatic
regulating or controlling the thermostats or locators in marine
engines; housings, covers, and adaptors for thermostats; seats with
wooden frames; and, cushions for boats, of foams, vinyl, and elastomers
(duty rate ranges from duty-free to 12.5%). The request indicates that
certain materials/components are subject to duties under Section 232 of
the Trade Expansion Act of 1962 (Section 232) or Section 301 of the
Trade Act of 1974 (Section 301), depending on the country of origin.
The applicable Section 232 and Section 301 decisions require subject
merchandise to be admitted to FTZs in privileged foreign status (19 CFR
146.41).
Public comment is invited from interested parties. Submissions
shall be addressed to the Board's Executive Secretary and sent to:
[email protected]. The closing period for their receipt is November 28,
2022.
A copy of the notification will be available for public inspection
in the ``Online FTZ Information System'' section of the Board's
website.
For further information, contact Juanita Chen at
[email protected].
Dated: October 11, 2022.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2022-22438 Filed 10-14-22; 8:45 am]
BILLING CODE 3510-DS-P