[Federal Register Volume 87, Number 160 (Friday, August 19, 2022)]
[Notices]
[Pages 51056-51059]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-17919]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[C-570-030; C-580-882]


Certain Cold-Rolled Steel Flat Products From the People's 
Republic of China and the Republic of Korea: Continuation of 
Countervailing Duty Orders

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: As a result of the determinations by the U.S. Department of 
Commerce (Commerce) and the U.S. International Trade Commission (ITC) 
that revocation of the countervailing duty (CVD) orders on certain 
cold-rolled steel flat products (cold-rolled steel or CRS) from the 
People's Republic of China (China) and the Republic of Korea (Korea) 
would likely lead to continuation or recurrence of net countervailable 
subsidies and material injury to an industry in the United States, 
Commerce is publishing a notice of continuation of the CVD orders.

DATES: Applicable August 19, 2022.

FOR FURTHER INFORMATION CONTACT: Tyler Weinhold or Harrison Tanchuck, 
AD/CVD Operations, Office VI, Enforcement and Compliance, International 
Trade Administration, U.S. Department of Commerce, 1401 Constitution 
Avenue NW, Washington, DC 20230; telephone: (202) 482-1221 or (202) 
482-7421, respectively.

SUPPLEMENTARY INFORMATION:

Background

    On July 14 and September 20, 2016, Commerce published in the 
Federal Register the CVD orders on cold-rolled steel from China and 
Korea, respectively.\1\ On June 1, 2021, Commerce published a notice of 
initiation of the first sunset review of the Orders, pursuant to 
section 751(c)(2) of the Tariff Act of 1930, as amended (the Act).\2\ 
Commerce conducted expedited (120-day) sunset reviews of the Orders, 
pursuant to section 751(c)(3)(B) of the Act and 19 CFR 
351.218(e)(1)(ii)(C)(2).
---------------------------------------------------------------------------

    \1\ See Certain Cold-Rolled Steel Flat Products from the 
People's Republic of China: Countervailing Duty Order, 81FR 45960 
(July 14, 2016) (CRS China Order); and Certain Cold-Rolled Steel 
Flat Products from Brazil, India, and the Republic of Korea: Amended 
Final Affirmative Countervailing Duty Determination and 
Countervailing DutyOrder (the Republic of Korea) and Countervailing 
Duty Orders (Brazil and India), 81 FR 64436 (September 20, 2016) 
(CRS Korea Order) (collectively, the Orders).
    \2\ See Initiation of Five-Year (Sunset) Reviews, 86 FR 29239 
(June 1, 2021).
---------------------------------------------------------------------------

    As a result of these reviews, pursuant to sections 751(c)(1) and 
752(c) of the

[[Page 51057]]

Act, Commerce determined that revocation of the Orders on cold-rolled 
steel from China and Korea would likely lead to continuation or 
recurrence of countervailable subsidies. Commerce, therefore, notified 
the ITC of the magnitude of the net countervailable subsidy rates 
likely to prevail should the Orders be revoked.\3\
---------------------------------------------------------------------------

    \3\ See Certain Cold-Rolled Steel Flat Products from the 
People's Republic of China and the Republic of Korea: Final Results 
of the Expedited First Sunset Review of the Countervailing Duty 
Orders, 86 FR 54677 (September 28, 2021), and accompanying Issues 
and Decision Memorandum (IDM).
---------------------------------------------------------------------------

    On August 12, 2022, the ITC published its determination, pursuant 
to sections 751(c) and 752(a) of the Act, that revocation of the Orders 
would likely lead to continuation or recurrence of material injury to 
an industry in the United States within a reasonably foreseeable 
time.\4\
---------------------------------------------------------------------------

    \4\ See Cold-Rolled Steel Flat Products from Brazil, China, 
India, Japan, South Korea, and the United Kingdom, 87 FR 49886 
(August 12, 2022).
---------------------------------------------------------------------------

Scope of the Orders

CRS From China 5
---------------------------------------------------------------------------

    \5\ See CRS China Order; see also Memorandum, ``Certain Cold-
Rolled Steel Flat Products from the People's Republic of China (C-
570-030): Request from Customs and Border Protection to Update the 
ACE AD/CVD Case Reference File,'' dated September 13, 2021; and 
Certain Cold-Rolled Steel Flat Products from the People's Republic 
of China: Affirmative Final Determination of Circumvention of the 
Antidumping Duty and Countervailing Duty Orders, 83 FR 23891 (May 
23, 2018), and accompanying IDM.
---------------------------------------------------------------------------

    The products covered by this Order are certain cold-rolled (cold-
reduced), flat-rolled steel products, whether or not annealed, painted, 
varnished, or coated with plastics or other non-metallic substances. 
The products covered do not include those that are clad, plated, or 
coated with metal. The products covered include coils that have a width 
or other lateral measurement (``width'') of 12.7 mm or greater, 
regardless of form of coil (e.g., in successively superimposed layers, 
spirally oscillating, etc.). The products covered also include products 
not in coils (e.g., in straight lengths) of a thickness less than 4.75 
mm and a width that is 12.7 mm or greater and that measures at least 10 
times the thickness. The products covered also include products not in 
coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and 
a width exceeding 150 mm and measuring at least twice the thickness. 
The products described above may be rectangular, square, circular, or 
other shape and include products of either rectangular or non-
rectangular cross-section where such cross-section is achieved 
subsequent to the rolling process, i.e., products which have been 
``worked after rolling'' (e.g., products which have been beveled or 
rounded at the edges). For purposes of the width and thickness 
requirements referenced above:
    (1) Where the nominal and actual measurements vary, a product is 
within the scope if application of either the nominal or actual 
measurement would place it within the scope based on the definitions 
set forth above, and
    (2) Where the width and thickness vary for a specific product 
(e.g., the thickness of certain products with non-rectangular cross-
section, the width of certain products with non-rectangular shape, 
etc.), the measurement at its greatest width or thickness applies.
    Steel products included in the scope of this Order are products in 
which: (1) iron predominates, by weight, over each of the other 
contained elements; (2) the carbon content is 2 percent or less, by 
weight; and (3) none of the elements listed below exceeds the quantity, 
by weight, respectively indicated:

 2.50 percent of manganese, or
 3.30 percent of silicon, or
 1.50 percent of copper, or
 1.50 percent of aluminum, or
 1.25 percent of chromium, or
 0.30 percent of cobalt, or
 0.40 percent of lead, or
 2.00 percent of nickel, or
 0.30 percent of tungsten (also called wolfram), or
 0.80 percent of molybdenum, or
 0.10 percent of niobium (also called columbium), or
 0.30 percent of vanadium, or
 0.30 percent of zirconium

    Unless specifically excluded, products are included in this scope 
regardless of levels of boron and titanium.
    For example, specifically included in this scope are vacuum 
degassed, fully stabilized (commonly referred to as interstitial-free 
(IF)) steels, high strength low alloy (HSLA) steels, motor lamination 
steels, Advanced High Strength Steels (AHSS), and Ultra High Strength 
Steels (UHSS). IF steels are recognized as low carbon steels with 
micro-alloying levels of elements such as titanium and/or niobium added 
to stabilize carbon and nitrogen elements. HSLA steels are recognized 
as steels with micro-alloying levels of elements such as chromium, 
copper, niobium, titanium, vanadium, and molybdenum. Motor lamination 
steels contain micro-alloying levels of elements such as silicon and 
aluminum. AHSS and UHSS are considered high tensile strength and high 
elongation steels, although AHSS and UHSS are covered whether or not 
they are high tensile strength or high elongation steels.
    Subject merchandise includes cold-rolled steel that has been 
further processed in a third country, including but not limited to 
annealing, tempering, painting, varnishing, trimming, cutting, 
punching, and/or slitting, or any other processing that would not 
otherwise remove the merchandise from the scope of this Order if 
performed in the country of manufacture of the cold-rolled steel.
    All products that meet the written physical description, and in 
which the chemistry quantities do not exceed any one of the noted 
element levels listed above, are within the scope of this Order unless 
specifically excluded. The following products are outside of and/or 
specifically excluded from the scope of this Order:
     Ball bearing steels; \6\
---------------------------------------------------------------------------

    \6\ Ball bearing steels are defined as steels which contain, in 
addition to iron, each of the following elements by weight in the 
amount specified: (i) not less than 0.95 nor more than 1.13 percent 
of carbon; (ii) not less than 0.22 nor more than 0.48 percent of 
manganese; (iii) none, or not more than 0.03 percent of sulfur; (iv) 
none, or not more than 0.03 percent of phosphorus; (v) not less than 
0.18 nor more than 0.37 percent of silicon; (vi) not less than 1.25 
nor more than 1.65 percent of chromium; (vii) none, or not more than 
0.28 percent of nickel; (viii) none, or not more than 0.38 percent 
of copper; and (ix) none, or not more than 0.09 percent of 
molybdenum.
---------------------------------------------------------------------------

     Tool steels; \7\
---------------------------------------------------------------------------

    \7\ Tool steels are defined as steels which contain the 
following combinations of elements in the quantity by weight 
respectively indicated: (i) more than 1.2 percent carbon and more 
than 10.5 percent chromium; or (ii) not less than 0.3 percent carbon 
and 1.25 percent or more but less than 10.5 percent chromium; or 
(iii) not less than 0.85 percent carbon and 1 percent to 1.8 
percent, inclusive, manganese; or (iv) 0.9 percent to 1.2 percent, 
inclusive, chromium and 0.9 percent to 1.4 percent, inclusive, 
molybdenum; or (v) not less than 0.5 percent carbon and not less 
than 3.5 percent molybdenum; or (vi) not less than 0.5 percent 
carbon and not less than 5.5 percent tungsten.
---------------------------------------------------------------------------

     Silico-manganese steel; \8\
---------------------------------------------------------------------------

    \8\ Silico-manganese steel is defined as steels containing by 
weight: (i) not more than 0.7 percent of carbon; (ii) 0.5 percent or 
more but not more than 1.9 percent of manganese, and (iii) 0.6 
percent or more but not more than 2.3 percent of silicon.
---------------------------------------------------------------------------

     Grain-oriented electrical steels (GOES) as defined in the 
final determination of the U.S. Department of Commerce in Grain-
Oriented Electrical Steel from Germany, Japan, and Poland.\9\
---------------------------------------------------------------------------

    \9\ See Grain-Oriented Electrical Steel from Germany, Japan, and 
Poland: Final Determinations of Sales at Less Than Fair Value and 
Certain Final Affirmative Determination of Critical Circumstances, 
79 FR 42501, 42503 (July 22, 2014). This determination defines 
grain-oriented electrical steel as ``a flat-rolled alloy steel 
product containing by weight at least 0.6 percent but not more than 
6 percent of silicon, not more than 0.08 percent of carbon, not more 
than 1.0 percent of aluminum, and no other element in an amount that 
would give the steel the characteristics of another alloy steel, in 
coils or in straight lengths.''
---------------------------------------------------------------------------

     Non-Oriented Electrical Steels (NOES), as defined in the 
antidumping

[[Page 51058]]

orders issued by the U.S. Department of Commerce in Non-Oriented 
Electrical Steel from the People's Republic of China, Germany, Japan, 
the Republic of Korea, Sweden, and Taiwan.\10\
---------------------------------------------------------------------------

    \10\ See Non-Oriented Electrical Steel from the People's 
Republic of China, Germany, Japan, the Republic of Korea, Sweden, 
and Taiwan: Antidumping Duty Orders, 79 FR 71741, 71741-42 (December 
3, 2014) (NOES from Germany, Japan, and Poland Order). The orders 
define NOES as ``cold-rolled, flat-rolled, alloy steel products, 
whether or not in coils, regardless of width, having an actual 
thickness of 0.20 mm or more, in which the core loss is 
substantially equal in any direction of magnetization in the plane 
of the material. The term `substantially equal' means that the cross 
grain direction of core loss is no more than 1.5 times the straight 
grain direction (i.e., the rolling direction) of core loss. NOES has 
a magnetic permeability that does not exceed 1.65 Tesla when tested 
at a field of 800 A/m (equivalent to 10 Oersteds) along (i.e., 
parallel to) the rolling direction of the sheet (i.e., B800 value). 
NOES contains by weight more than 1.00 percent of silicon but less 
than 3.5 percent of silicon, not more than 0.08 percent of carbon, 
and not more than 1.5 percent of aluminum. NOES has a surface oxide 
coating, to which an insulation coating may be applied.''
---------------------------------------------------------------------------

    The products subject to this Order are currently classified in the 
Harmonized Tariff Schedule of the United States (HTSUS) under item 
numbers: 7209.15.0000, 7209.16.0030, 7209.16.0040, 7209.16.0045, 
7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0040, 
7209.17.0045, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 
7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 
7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 
7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 
7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 
7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 
7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 
7226.92.5000, 7226.92.7050, and 7226.92.8050.
    The products subject to this Order may also enter under the 
following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 
7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 
7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 
7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 
7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 
7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, 
and 7229.90.1000.
    The HTSUS subheadings above are provided for convenience and 
customs purposes only. The written description of the scope of this 
Order is dispositive.

CRS From Korea 11
---------------------------------------------------------------------------

    \11\ See CRS Korea Order; see also Memorandum ``Certain Cold-
Rolled Steel Flat Products from the Republic of Korea (C-580-882): 
Request from Customs and Border Protection to Update the ACE AD/CVD 
Case Reference File,'' dated September 13, 2021; and Certain Cold-
Rolled Steel Flat Products from the Republic of Korea: Final Results 
of Countervailing Duty Administrative Review; 2018, 86 FR 40465 
(July 28, 2021) (CRS Korea 2018 Final Results), and accompanying 
IDM.
---------------------------------------------------------------------------

    The products covered by this Order are certain cold-rolled (cold-
reduced), flat-rolled steel products, whether or not annealed, painted, 
varnished, or coated with plastics or other non-metallic substances. 
The products covered do not include those that are clad, plated, or 
coated with metal. The products covered include coils that have a width 
or other lateral measurement (``width'') of 12.7 mm or greater, 
regardless of form of coil (e.g., in successively superimposed layers, 
spirally oscillating, etc.). The products covered also include products 
not in coils (e.g., in straight lengths) of a thickness less than 4.75 
mm and a width that is 12.7 mm or greater and that measures at least 10 
times the thickness. The products covered also include products not in 
coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and 
a width exceeding 150 mm and measuring at least twice the thickness. 
The products described above may be rectangular, square, circular, or 
other shape and include products of either rectangular or non-
rectangular cross-section where such cross-section is achieved 
subsequent to the rolling process, i.e., products which have been 
``worked after rolling'' (e.g., products which have been beveled or 
rounded at the edges). For purposes of the width and thickness 
requirements referenced above:
    (1) where the nominal and actual measurements vary, a product is 
within the scope if application of either the nominal or actual 
measurement would place it within the scope based on the definitions 
set forth above, and
    (2) where the width and thickness vary for a specific product 
(e.g., the thickness of certain products with non-rectangular cross-
section, the width of certain products with non-rectangular shape, 
etc.), the measurement at its greatest width or thickness applies.
    Steel products included in the scope of this Order are products in 
which: (1) iron predominates, by weight, over each of the other 
contained elements; (2) the carbon content is 2 percent or less, by 
weight; and (3) none of the elements listed below exceeds the quantity, 
by weight, respectively indicated:

 2.50 percent of manganese, or
 3.30 percent of silicon, or
 1.50 percent of copper, or
 1.50 percent of aluminum, or
 1.25 percent of chromium, or
 0.30 percent of cobalt, or
 0.40 percent of lead, or
 2.00 percent of nickel, or
 0.30 percent of tungsten (also called wolfram), or
 0.80 percent of molybdenum, or
 0.10 percent of niobium (also called columbium), or
 0.30 percent of vanadium, or
 0.30 percent of zirconium

    Unless specifically excluded, products are included in this scope 
regardless of levels of boron and titanium.
    For example, specifically included in this scope are vacuum 
degassed, fully stabilized (commonly referred to as interstitial-free 
(IF)) steels, high strength low alloy (HSLA) steels, motor lamination 
steels, Advanced High Strength Steels (AHSS), and Ultra High Strength 
Steels (UHSS). IF steels are recognized as low carbon steels with 
micro-alloying levels of elements such as titanium and/or niobium added 
to stabilize carbon and nitrogen elements. HSLA steels are recognized 
as steels with micro-alloying levels of elements such as chromium, 
copper, niobium, titanium, vanadium, and molybdenum. Motor lamination 
steels contain micro-alloying levels of elements such as silicon and 
aluminum. AHSS and UHSS are considered high tensile strength and high 
elongation steels, although AHSS and UHSS are covered whether or not 
they are high tensile strength or high elongation steels.
    Subject merchandise includes cold-rolled steel that has been 
further processed in a third country, including but not limited to 
annealing, tempering, painting, varnishing, trimming, cutting, 
punching, and/or slitting, or any other processing that would not 
otherwise remove the merchandise from the scope of this Order if 
performed in the country of manufacture of the cold-rolled steel.
    All products that meet the written physical description, and in 
which the chemistry quantities do not exceed any one of the noted 
element levels listed above, are within the scope of this Order unless 
specifically excluded. The following products are outside of and/or 
specifically excluded from the scope of this Order:

[[Page 51059]]

     Ball bearing steels; \12\
---------------------------------------------------------------------------

    \12\ Ball bearing steels are defined as steels which contain, in 
addition to iron, each of the following elements by weight in the 
amount specified: (i) not less than 0.95 nor more than 1.13 percent 
of carbon; (ii) not less than 0.22 nor more than 0.48 percent of 
manganese; (iii) none, or not more than 0.03 percent of sulfur; (iv) 
none, or not more than 0.03 percent of phosphorus; (v) not less than 
0.18 nor more than 0.37 percent of silicon; (vi) not less than 1.25 
nor more than 1.65 percent of chromium; (vii) none, or not more than 
0.28 percent of nickel; (viii) none, or not more than 0.38 percent 
of copper; and (ix) none, or not more than 0.09 percent of 
molybdenum.
---------------------------------------------------------------------------

     Tool steels; \13\
---------------------------------------------------------------------------

    \13\ Tool steels are defined as steels which contain the 
following combinations of elements in the quantity by weight 
respectively indicated: (i) more than 1.2 percent carbon and more 
than 10.5 percent chromium; or (ii) not less than 0.3 percent carbon 
and 1.25 percent or more but less than 10.5 percent chromium; or 
(iii) not less than 0.85 percent carbon and 1 percent to 1.8 
percent, inclusive, manganese; or (iv) 0.9 percent to 1.2 percent, 
inclusive, chromium and 0.9 percent to 1.4 percent, inclusive, 
molybdenum; or (v) not less than 0.5 percent carbon and not less 
than 3.5 percent molybdenum; or (vi) not less than 0.5 percent 
carbon and not less than 5.5 percent tungsten.
---------------------------------------------------------------------------

     Silico-manganese steel; \14\
---------------------------------------------------------------------------

    \14\ Silico-manganese steel is defined as steels containing by 
weight: (i) not more than 0.7 percent of carbon; (ii) 0.5 percent or 
more but not more than 1.9 percent of manganese, and (iii) 0.6 
percent or more but not more than 2.3 percent of silicon.
---------------------------------------------------------------------------

     Grain-oriented electrical steels (GOES) as defined in the 
final determination of the U.S. Department of Commerce in Grain-
Oriented Electrical Steel from Germany, Japan, and Poland.\15\
---------------------------------------------------------------------------

    \15\ See NOES from Germany, Japan, and Poland Order. This 
determination defines grain-oriented electrical steel as ``a flat-
rolled alloy steel product containing by weight at least 0.6 percent 
but not more than 6 percent of silicon, not more than 0.08 percent 
of carbon, not more than 1.0 percent of aluminum, and no other 
element in an amount that would give the steel the characteristics 
of another alloy steel, in coils or in straight lengths.''
---------------------------------------------------------------------------

     Non-Oriented Electrical Steels (NOES), as defined in the 
antidumping orders issued by the U.S. Department of Commerce in Non-
Oriented Electrical Steel from the People's Republic of China, Germany, 
Japan, the Republic of Korea, Sweden, and Taiwan.\16\
---------------------------------------------------------------------------

    \16\ See NOES from Germany, Japan, and Poland Order. The orders 
define NOES as ``cold-rolled, flat-rolled, alloy steel products, 
whether or not in coils, regardless of width, having an actual 
thickness of 0.20 mm or more, in which the core loss is 
substantially equal in any direction of magnetization in the plane 
of the material. The term `substantially equal' means that the cross 
grain direction of core loss is no more than 1.5 times the straight 
grain direction (i.e., the rolling direction) of core loss. NOES has 
a magnetic permeability that does not exceed 1.65 Tesla when tested 
at a field of 800 A/m (equivalent to 10 Oersteds) along (i.e., 
parallel to) the rolling direction of the sheet (i.e., B800 value). 
NOES contains by weight more than 1.00 percent of silicon but less 
than 3.5 percent of silicon, not more than 0.08 percent of carbon, 
and not more than 1.5 percent of aluminum. NOES has a surface oxide 
coating, to which an insulation coating may be applied.''
---------------------------------------------------------------------------

    The products subject to this Order are currently classified in the 
Harmonized Tariff Schedule of the United States (HTSUS) under item 
numbers: 7209.15.0000, 7209.16.0030, 7209.16.0040, 7209.16.0045, 
7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0040, 
7209.17.0045, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 
7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 
7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 
7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 
7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 
7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 
7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 
7226.92.5000, 7226.92.7050, and 7226.92.8050.
    The products subject to this Order may also enter under the 
following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 
7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 
7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 
7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 
7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 
7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, 
and 7229.90.1000.
    The HTSUS subheadings above are provided for convenience and 
customs purposes only. The written description of the scope of this 
Order is dispositive.

Continuation of the Orders

    As a result of the determinations by Commerce and the ITC that 
revocation of the Orders would likely lead to continuation or 
recurrence of countervailable subsidies as well as material injury to 
an industry in the United States, pursuant to section 751(d)(2) of the 
Act and 19 CFR 351.218(a), Commerce hereby orders the continuation of 
the Orders.
    U.S. Customs and Border Protection will continue to collect CVD 
cash deposits at the rates in effect at the time of entry for all 
imports of subject merchandise. The effective date of continuation of 
the Orders will be the date of publication in the Federal Register of 
this notice of continuation. Pursuant to section 751(c)(2) of the Act 
and 19 CFR 351.281(c)(2), Commerce intends to initiate the next five-
year (sunset) review of the Orders no later than 30 days prior to the 
fifth anniversary of the effective date of continuation.

Administrative Protective Order

    This notice also serves as the only reminder to parties subject to 
an administrative protective order (APO) of their responsibility 
concerning the return, destruction, or conversion to judicial 
protective order of proprietary information disclosed under APO in 
accordance with 19 CFR 351.305(a)(3). Failure to comply is a violation 
of the APO which may be subject to sanctions.

Notification to Interested Parties

    This five-year sunset review and this notice are in accordance with 
section 751(c) and (d)(2) of the Act and published pursuant to section 
777(i)(1) of the Act and 19 CFR 351.218(f)(4).

    Dated: August 15, 2022.
Lisa W. Wang,
Assistant Secretary for Enforcement and Compliance.
[FR Doc. 2022-17919 Filed 8-18-22; 8:45 am]
BILLING CODE 3510-DS-P