[Federal Register Volume 87, Number 122 (Monday, June 27, 2022)]
[Notices]
[Page 38057]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-13663]



[[Page 38057]]

=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-26-2022]


Foreign-Trade Zone (FTZ) 189--Kent/Ottawa/Muskegon Counties, 
Michigan; Notification of Proposed Production Activity, GHSP, Inc. 
(Automotive Products), Grand Haven, Hart and Holland, Michigan

    GHSP, Inc., submitted a notification of proposed production 
activity to the FTZ Board (the Board) for its facilities in Grand 
Haven, Hart and Holland, Michigan within Subzone 189F. The notification 
conforming to the requirements of the Board's regulations (15 CFR 
400.22) was received on June 15, 2022.
    Pursuant to 15 CFR 400.14(b), FTZ production activity would be 
limited to the specific foreign-status materials/components and 
specific finished products described in the submitted notification 
(summarized below) and subsequently authorized by the Board. The 
benefits that may stem from conducting production activity under FTZ 
procedures are explained in the background section of the Board's 
website--accessible via www.trade.gov/ftz.
    The proposed finished products include: tube plugs; lock pins; 
cable brackets for shifters; auxiliary pumps for oil, water and fuel; 
pump covers; liquid crystal displays (LCD); LED displays; printed 
circuit boards; touch sensors; motor assemblies; and, automobile 
shifters (duty rate ranges from duty-free to 3.8%).
    The proposed foreign-status materials and components include: butyl 
rope; grease; bonding adhesives; solder; polypropylene; porene; 
lubricating gel; adhesives; mounting tapes; pump decor trims; plastic 
sheets; thermal trays; cable brackets; o-rings; ball bearings; gaskets; 
shift lock stoppers; shifter boot dust covers; encoder pads; tube 
plugs; blocker gaskets; printed circuit board gaskets; boot dust 
covers; electronic cells; bezels; electronic encoders; bezel flocking 
tapes; cable bracket pivot pins; wire gauges; metal screws; bracket 
screws; nut flanges; washers; rivets; lock pins; pivot pins; collars; 
springs--lever; pin shift cables; cable pins; cable brackets; plugs; 
auxiliary pumps; final pump assemblies, sensorless; pump covers; lamps; 
filter elements; relief valves; motor bearings; lead nylon spacers; 
stator overmolds; lamination stack, moldings; transfer switchers; 
gerotor sets; solenoids; button/pad assemblies; reflector holders; 
encoders, mode; glass tops; LED drivers; LCDs; transitional 5 burner 
LED displays; capacitors; resistors; stator boards; fuses; transistors; 
relays; switches; connectors; touch sensors; motor assemblies, 
sensorless; light pipes; LEDs; strain gauge sensors; micro sensors; 
head assembly kits; smart ultra-violet ``A'' actuators; magnet wires; 
wire harnesses; drive mode button assemblies; light reflectors; 
syringes for grease application; and, main housing covers (duty rate 
ranges from duty-free to 8.5%). The request indicates that certain 
materials/components are subject to duties under Section 301 of the 
Trade Act of 1974 (Section 301), depending on the country of origin. 
The applicable Section 301 decisions require subject merchandise to be 
admitted to FTZs in privileged foreign status (19 CFR 146.41).
    Public comment is invited from interested parties. Submissions 
shall be addressed to the Board's Executive Secretary and sent to: 
[email protected]. The closing period for their receipt is August 8, 2022.
    A copy of the notification will be available for public inspection 
in the ``Online FTZ Information System'' section of the Board's 
website.
    For further information, contact Christopher Wedderburn at 
[email protected].

    Dated: June 21, 2022.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2022-13663 Filed 6-24-22; 8:45 am]
BILLING CODE 3510-DS-P