[Federal Register Volume 87, Number 117 (Friday, June 17, 2022)]
[Notices]
[Pages 36461-36464]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-13139]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-570-967; C-570-968]


Aluminum Extrusions From the People's Republic of China: 
Preliminary Results of Changed Circumstances Reviews

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: The Department of Commerce (Commerce) intends to revoke, in 
part, the antidumping duty (AD) and countervailing duty (CVD) orders on 
aluminum extrusions from the People's Republic of China (China) with 
respect certain rectangular wire. Interested

[[Page 36462]]

parties are invited to comment on these preliminary results.

DATES: Applicable June 17, 2022.

FOR FURTHER INFORMATION CONTACT: Mark Flessner or Erin Kearney, AD/CVD 
Operations, Office VI, Enforcement and Compliance, International Trade 
Administration, U.S. Department of Commerce, 1401 Constitution Avenue 
NW, Washington, DC 20230; telephone: (202) 482-6312 or (202) 482-0167, 
respectively.

SUPPLEMENTARY INFORMATION:

Background

    On May 26, 2011, Commerce published the AD and CVD orders on 
aluminum extrusions from China.\1\
---------------------------------------------------------------------------

    \1\ See Aluminum Extrusions from the People's Republic of China: 
Antidumping Duty Order, 76 FR 30650 (May 26, 2011); and Aluminum 
Extrusions from the People's Republic of China: Countervailing Duty 
Order, 76 FR 30653 (May 26, 2011) (collectively, Orders).
---------------------------------------------------------------------------

    On January 6, 2014, Commerce issued the final results of changed 
circumstances reviews (CCRs), in which it revoked the Orders, in part, 
based on a request from 3M Company (3M) with regard to a similar 
product, and added the following language to the scope of the Orders:

    Also excluded from the scope of the order is certain rectangular 
wire produced from continuously cast rolled aluminum wire rod, which 
is subsequently extruded to dimension to form rectangular wire. The 
product is made from aluminum alloy grade 1070 or 1370, with no 
recycled metal content allowed. The dimensions of the wire are 5 mm 
(+/- 0.05 mm) in width and 1.0 mm (+/- 0.02 mm) in thickness. 
Imports of rectangular wire are provided for under HTSUS category 
7605.19.000.\2\
---------------------------------------------------------------------------

    \2\ See Aluminum Extrusions from the People's Republic of China: 
Final Results of Changed Circumstances Reviews; Partial Revocation 
of Antidumping and Countervailing Duty Orders, 79 FR 634 (January 6, 
2014) (2014 Revocation in Part).

    On March 23, 2022, 3M requested that Commerce initiate CCRs to 
revoke, in part, the Orders with respect to certain rectangular wire, 
pursuant to section 751(b)(l) of the Tariff Act of 1930, as amended 
(the Act).\3\ 3M requested that Commerce exercise its discretion to 
extend the effective date back by one additional day, setting an 
effective date of the revocation of the Orders to entries entered on or 
after April 30, 2021. Additionally, 3M requested that Commerce expedite 
the reviews by combining the notice of initiation of the CCRs and the 
preliminary results of the reviews pursuant to 19 CFR 
351.221(c)(3)(ii). 3M stated that it is a U.S. importer of certain 
rectangular wire and, as such, is an interested party pursuant to 
Section 771(9)(A) of the Act.
---------------------------------------------------------------------------

    \3\ See 3M's Letter, ``Aluminum Extrusions from the People's 
Republic of China: Changed Circumstances Review Request,'' dated 
March 23, 2022 (CCR Request).
---------------------------------------------------------------------------

    On April 13, 2022, the Aluminum Extrusions Fair Trade Committee 
(the petitioner) submitted comments in support of partially revoking 
the Orders with regard to the certain rectangular wire defined in the 
CCR Request.\4\ The petitioner submitted data demonstrating that it 
represents ``substantially all'' of the production of the domestic like 
product.\5\ The petitioner also supported 3M's request that the partial 
revocation of the Orders with respect to the certain rectangular wire 
defined in the CCR Request include unliquidated entries of the certain 
rectangular wire that was entered on or after April 30, 2021.\6\ 
Additionally, the petitioner supported 3M's request that Commerce 
expedite these reviews by combining the notice of initiation of the 
CCRs and the preliminary results of the reviews.\7\
---------------------------------------------------------------------------

    \4\ See Petitioner's Letter, ``Aluminum Extrusions from the 
People's Republic of China: Letter in Support of 3M Changed 
Circumstances Review Request,'' dated April 13, 2022 (Petitioner's 
Support Letter).
    \5\ Id. at 2-3.
    \6\ Id. at 3.
    \7\ Id.
---------------------------------------------------------------------------

    On May 12, 2022, we published the initiation of the requested 
CCRs.\8\ We determined that it was not appropriate to combine the 
notice of initiation with notice of preliminary results because of the 
need to provide interested parties an opportunity to address the 
language of the proposed partial revocation of the Orders.\9\ 
Therefore, in the Initiation Notice, we invited interested parties to 
provide comments and/or factual information regarding these CCRs, 
including comments on the synthesis of the language of the of the 2014 
Revocation in Part with the certain rectangular wire defined in the 
current CCR Request, and the setting of an effective date of the 
partial revocation of the Orders to entries entered on or after April 
30, 2021.
---------------------------------------------------------------------------

    \8\ See Aluminum Extrusions from the People's Republic of China: 
Initiation of Changed Circumstances Reviews, 87 FR 29110 (May 12, 
2022) (Initiation Notice).
    \9\ Id., 87 FR at 29111.
---------------------------------------------------------------------------

    On May 19, 2022, 3M submitted comments \10\ on the Initiation 
Notice in which 3M provided revised language to harmonize the language 
of the products that are the subject of these CCRs with the language 
that Commerce adopted in the 2014 Revocation in Part to yield a single 
exclusion on rectangular wire, as follows:
---------------------------------------------------------------------------

    \10\ See 3M's Letter, ``Aluminum Extrusions from the People's 
Republic of China: Comments of 3M Regarding Changed Circumstances 
Review on Certain Rectangular Wire,'' dated May 19, 2022 (3M 
Comments).

    Also excluded from the scope of the orders is certain 
rectangular wire, imported in bulk rolls or precut strips and 
produced from continuously cast rolled aluminum wire rod, which is 
subsequently extruded to dimension to form rectangular wire with or 
without rounded edges. The product is made from aluminum alloy grade 
1070 or 1370, with no recycled metal content allowed. The dimensions 
of the wire are 2.95 mm to 6.05 mm in width, and 0.65 mm to 1.25 mm 
in thickness. Imports of rectangular wire are provided for under 
---------------------------------------------------------------------------
HTSUS categories 7605.19.000, 7604.29.1090, or 7616.99.5190.

    3M continued to request that Commerce set an effective date of the 
partial revocation of the AD Order to entries entered on or after April 
30, 2021 (which had already been supported by the petitioner \11\). On 
May 20, 2022, the petitioner submitted comments \12\ in which it agreed 
with the integration of the language from the 2014 Revocation in Part 
with the language proposed by 3M in the CCR Request to create a single, 
revised exclusion regarding certain rectangular wire using the language 
cited above in the 3M Comments. No other party commented on the 
Initiation Notice.
---------------------------------------------------------------------------

    \11\ See Petitioner's Support Letter at 3.
    \12\ See Petitioner's Letter, ``Aluminum Extrusions from the 
People's Republic of China: Letter in Support of 3M Changed 
Circumstances Review,'' dated May 20, 2022.
---------------------------------------------------------------------------

Scope of the Orders

    The merchandise covered by these Orders is aluminum extrusions from 
China. For a complete description of the scope of the Orders (as they 
are presently composed), see the appendix to this notice.

Preliminary Results of Changed Circumstances Reviews and Intent To 
Revoke the Orders, in Part

    Pursuant to section 751(d)(1) of the Act, and 19 CFR 351.222(g), 
Commerce may revoke an order, in whole or in part, based on a review 
under section 751(b) of the Act (i.e., a CCR). Section 782(h)(2) of the 
Act gives Commerce the authority to revoke an order if producers 
accounting for substantially all of the production of the domestic like 
product have expressed a lack of interest in the order. Section 
351.222(g) of Commerce's regulations provides that Commerce will 
conduct a CCR under 19 CFR 351.216, and may revoke an order if it 
concludes that: (i) producers accounting for substantially all of the 
production of the domestic like product to which the order pertains 
have expressed a lack of interest in the relief provided by the order, 
in whole or in part; or (ii) other

[[Page 36463]]

changed circumstances sufficient to warrant revocation exist. Thus, 
both the Act and Commerce's regulations require that ``substantially 
all'' domestic producers express a lack of interest in the order for 
Commerce to revoke the order, in whole or in part.\13\ Commerce has 
interpreted ``substantially all'' to mean producers accounting for at 
least 85 percent of the total U.S. production of the domestic like 
product covered by the order.\14\ The petitioner submitted data 
indicating that it represented ``substantially all'' of the total U.S. 
production of the domestic like product covered by the Orders.\15\ In 
the Initiation Notice, Commerce invited interested parties to provide 
comments and/or factual information regarding these CCRs. No party 
submitted comments on industry support. In light of the petitioner's 
stated lack of interest in maintaining the Orders with respect to 
certain rectangular wire as described above, and in the absence of any 
interested party comments concerning industry support, we preliminarily 
conclude that producers accounting for substantially all of the 
production of the domestic like product to which the Orders pertain 
lack interest in the relief provided by the Orders with respect to 
certain rectangular wire as described above. Thus, we preliminarily 
determine that changed circumstances warrant revocation of the Orders, 
in part, with respect to certain rectangular wire as described above.
---------------------------------------------------------------------------

    \13\ See section 782(h) of the Act and 19 CFR 351.222(g).
    \14\ See, e.g., Honey from Argentina; Antidumping and 
Countervailing Duty Changed Circumstances Reviews; Preliminary 
Intent to Revoke Antidumping and Countervailing Duty Orders, 77 FR 
67790, 67791 (November 14, 2012), unchanged in Honey from Argentina; 
Final Results of Antidumping and Countervailing Duty Changed 
Circumstances Reviews; Revocation of Antidumping and Countervailing 
Duty Orders, 77 FR 77029 (December 31, 2012); and Crystalline 
Silicon Photovoltaic Cells, Whether or Not Assembled Into Modules, 
from the People's Republic of China: Preliminary Results of Changed 
Circumstances Reviews, and Intent To Revoke the Antidumping and 
Countervailing Duty Orders, in Part, 86 FR 33982 (June 28, 2021), 
unchanged in Crystalline Silicon Photovoltaic Cells, Whether or Not 
Assembled Into Modules, from the People's Republic of China: Final 
Results of Changed Circumstances Reviews, and Revocation of the 
Antidumping and Countervailing Duty Orders, in Part, 86 FR 71615 
(December 17, 2021).
    \15\ See Petitioner's Support Letter at 2-3 and Exhibit 1.
---------------------------------------------------------------------------

    Accordingly, we are notifying the public of our intent to revoke 
the Orders, in part, with respect to certain rectangular wire as 
described above:

    Also excluded from the scope of the orders is certain 
rectangular wire, imported in bulk rolls or precut strips and 
produced from continuously cast rolled aluminum wire rod, which is 
subsequently extruded to dimension to form rectangular wire with or 
without rounded edges. The product is made from aluminum alloy grade 
1070 or 1370, with no recycled metal content allowed. The dimensions 
of the wire are 2.95 mm to 6.05 mm in width, and 0.65 mm to 1.25 mm 
in thickness. Imports of rectangular wire are provided for under 
HTSUS categories 7605.19.000, 7604.29.1090, or 7616.99.5190.

    Lastly, we preliminarily determine that the effective date of the 
revocation of the AD Order will apply to entries entered on or after 
April 30, 2021. Setting the proposed effective date as the last day of 
the most-recently-completed POR aids materially in the orderly 
administration of the Orders in that it permits: (a) liquidation of 
entries for the 2020-2021 POR exactly concurrent with that POR; and (b) 
the refund of cash deposits for entries in the 2021-2022 POR exactly 
concurrent with this POR.
    We shall consider comments from interested parties on these 
preliminary results before issuing the final results of these CCRs.\16\
---------------------------------------------------------------------------

    \16\ See, e.g., Aluminum Extrusions from the People's Republic 
of China: Preliminary Results of Changed Circumstances Reviews, and 
Intent to Revoke Antidumping and Countervailing Duty Orders in Part, 
78 FR 66895 (November 7, 2013), unchanged in 2014 Revocation in 
Part; and 19 CFR 351.222(g)(3)(v).
---------------------------------------------------------------------------

Public Comment

    Interested parties are invited to comment on these preliminary 
results of CCRs in accordance with 19 CFR 351.309(c)(1)(ii). Comments 
may be submitted to Commerce no later than seven days after the date of 
publication of this notice. Rebuttal comments may be filed with 
Commerce no later than seven days after the comments are filed.\17\ 
Note that Commerce has temporarily modified certain of its requirements 
for serving documents containing business proprietary information until 
further notice.\18\ All submissions must be filed electronically using 
the Enforcement and Compliance's AD and CVD Centralized Electronic 
Service System (ACCESS). ACCESS is available to registered users at 
https://access.trade.gov. An electronically filed document must be 
received successfully in its entirety in ACCESS by 5:00 p.m. Eastern 
Time on the due date set forth in this notice.
---------------------------------------------------------------------------

    \17\ Submissions of rebuttal factual information must comply 
with 19 CFR 351.301(b)(2). See Temporary Rule Modifying AD/CVD 
Service Requirements Due to COVID-19; Extension of Effective Period, 
85 FR 41363 (July 10, 2020) (Temporary Rule).
    \18\ See Temporary Rule.
---------------------------------------------------------------------------

Final Results of the Changed Circumstances Reviews

    Commerce will issue the final results of these CCRs, which will 
include its analysis of any written comments, no later than 270 days 
after the date on which these reviews were initiated.\19\ If, in the 
final results of these reviews, Commerce continues to determine that 
changed circumstances warrant the revocation of the Orders, in part, we 
will instruct U.S. Customs and Border Protection (CBP) to liquidate 
without regard to antidumping or countervailing duties, and to refund 
any estimated antidumping and countervailing duties deposited on, all 
unliquidated entries of the merchandise covered by the revocation that 
are not covered by the final results of an administrative review or an 
automatic liquidation instruction to CBP. The effective date of the 
revocation of the AD Order will be applied to entries entered into the 
United States on or after April 30, 2021. The current requirement for 
cash deposits of estimated antidumping and countervailing duties on all 
entries of subject merchandise will continue unless they are modified 
pursuant to the final results of these CCRs.
---------------------------------------------------------------------------

    \19\ See 19 CFR 351.216(e).
---------------------------------------------------------------------------

Notification to Interested Parties

    These preliminary results of CCRs and this notice are published in 
accordance with sections 751(b) and 777(i) of the Act and 19 CFR 
351.216, 19 CFR 351.221(c)(3), and 19 CFR 351.222.

    Dated: June 13, 2022.
Lisa W. Wang,
Assistant Secretary for Enforcement and Compliance.

Appendix

Scope of the Orders

    The merchandise covered by the Orders is aluminum extrusions 
which are shapes and forms, produced by an extrusion process, made 
from aluminum alloys having metallic elements corresponding to the 
alloy series designations published by the Aluminum Association 
commencing with the numbers 1, 3, and 6 (or proprietary equivalents 
or other certifying body equivalents). Specifically, the subject 
merchandise made from aluminum alloy with an Aluminum Association 
series designation commencing with the number 1 contains not less 
than 99 percent aluminum by weight. The subject merchandise made 
from aluminum alloy with an Aluminum Association series designation 
commencing with the number 3 contains manganese as the major 
alloying element, with manganese accounting for not more than 3.0 
percent of total materials by weight. The subject merchandise is 
made from an aluminum alloy with an Aluminum Association series 
designation commencing

[[Page 36464]]

with the number 6 contains magnesium and silicon as the major 
alloying elements, with magnesium accounting for at least 0.1 
percent but not more than 2.0 percent of total materials by weight, 
and silicon accounting for at least 0.1 percent but not more than 
3.0 percent of total materials by weight. The subject aluminum 
extrusions are properly identified by a four-digit alloy series 
without either a decimal point or leading letter. Illustrative 
examples from among the approximately 160 registered alloys that may 
characterize the subject merchandise are as follows: 1350, 3003, and 
6060.
    Aluminum extrusions are produced and imported in a wide variety 
of shapes and forms, including, but not limited to, hollow profiles, 
other solid profiles, pipes, tubes, bars, and rods. Aluminum 
extrusions that are drawn subsequent to extrusion (drawn aluminum) 
are also included in the scope.
    Aluminum extrusions are produced and imported with a variety of 
finishes (both coatings and surface treatments), and types of 
fabrication. The types of coatings and treatments applied to subject 
aluminum extrusions include, but are not limited to, extrusions that 
are mill finished (i.e., without any coating or further finishing), 
brushed, buffed, polished, anodized (including brightdip anodized), 
liquid painted, or powder coated. Aluminum extrusions may also be 
fabricated, i.e., prepared for assembly. Such operations would 
include, but are not limited to, extrusions that are cut-to-length, 
machined, drilled, punched, notched, bent, stretched, knurled, 
swedged, mitered, chamfered, threaded, and spun. The subject 
merchandise includes aluminum extrusions that are finished (coated, 
painted, etc.), fabricated, or any combination thereof.
    Subject aluminum extrusions may be described at the time of 
importation as parts for final finished products that are assembled 
after importation, including, but not limited to, window frames, 
door frames, solar panels, curtain walls, or furniture. Such parts 
that otherwise meet the definition of aluminum extrusions are 
included in the scope. The scope includes the aluminum extrusion 
components that are attached (e.g., by welding or fasteners) to form 
subassemblies, i.e., partially assembled merchandise unless imported 
as part of the finished goods `kit' defined further below. The scope 
does not include the non-aluminum extrusion components of 
subassemblies or subject kits.
    Subject extrusions may be identified with reference to their end 
use, such as fence posts, electrical conduits, door thresholds, 
carpet trim, or heat sinks (that do not meet the finished heat sink 
exclusionary language below). Such goods are subject merchandise if 
they otherwise meet the scope definition, regardless of whether they 
are ready for use at the time of importation.
    The following aluminum extrusion products are excluded: aluminum 
extrusions made from aluminum alloy with an Aluminum Association 
series designations commencing with the number 2 and containing in 
excess of 1.5 percent copper by weight; aluminum extrusions made 
from aluminum alloy with an Aluminum Association series designation 
commencing with the number 5 and containing in excess of 1.0 percent 
magnesium by weight; and aluminum extrusions made from aluminum 
alloy with an Aluminum Association series designation commencing 
with the number 7 and containing in excess of 2.0 percent zinc by 
weight.
    The scope also excludes finished merchandise containing aluminum 
extrusions as parts that are fully and permanently assembled and 
completed at the time of entry, such as finished windows with glass, 
doors with glass or vinyl, picture frames with glass pane and 
backing material, and solar panels. The scope also excludes finished 
goods containing aluminum extrusions that are entered unassembled in 
a ``finished goods kit.'' A finished goods kit is understood to mean 
a packaged combination of parts that contains, at the time of 
importation, all of the necessary parts to fully assemble a final 
finished good and requires no further finishing or fabrication, such 
as cutting or punching, and is assembled ``as is'' into a finished 
product. An imported product will not be considered a ``finished 
goods kit'' and therefore excluded from the scope of the Orders 
merely by including fasteners such as screws, bolts, etc. in the 
packaging with an aluminum extrusion product.
    The scope also excludes aluminum alloy sheet or plates produced 
by other than the extrusion process, such as aluminum products 
produced by a method of casting. Cast aluminum products are properly 
identified by four digits with a decimal point between the third and 
fourth digit. A letter may also precede the four digits. The 
following Aluminum Association designations are representative of 
aluminum alloys for casting: 208.0, 295.0, 308.0, 355.0, C355.0, 
356.0, A356.0, A357.0, 360.0, 366.0, 380.0, A380.0, 413.0, 443.0, 
514.0, 518.1, and 712.0. The scope also excludes pure, unwrought 
aluminum in any form.
    The scope also excludes collapsible tubular containers composed 
of metallic elements corresponding to alloy code 1080A as designated 
by the Aluminum Association where the tubular container (excluding 
the nozzle) meets each of the following dimensional characteristics: 
(1) length of 37 millimeters (``mm'') or 62 mm, (2) outer diameter 
of 11.0 mm or 12.7 mm, and (3) wall thickness not exceeding 0.13 mm.
    Also excluded from the scope of these Orders are finished heat 
sinks. Finished heat sinks are fabricated heat sinks made from 
aluminum extrusions the design and production of which are organized 
around meeting certain specified thermal performance requirements 
and which have been fully, albeit not necessarily individually, 
tested to comply with such requirements.
    Also excluded from the scope of the Orders is certain 
rectangular wire produced from continuously cast rolled aluminum 
wire rod, which is subsequently extruded to dimension to form 
rectangular wire. The product is made from aluminum alloy grade 1070 
or 1370, with no recycled metal content allowed. The dimensions of 
the wire are 5 mm (+/- 0.05 mm) in width and 1.0 mm (+/- 0.02 mm) in 
thickness. Imports of rectangular wire are provided for under HTSUS 
category 7605.19.000.
    Imports of the subject merchandise are provided for under the 
following categories of the Harmonized Tariff Schedule of the United 
States (HTSUS): 6603.90.81.00, 7604.21.00.00, 7604.21.00.10, 
7604.21.00.90, 7604.29.10.00, 7604.29.10.10, 7604.29.10.90, 
7604.29.30.10, 7604.29.30.50, 7604.29.30.60, 7604.29.30.90, 
7604.29.50.30, 7604.29.50.60, 7604.29.50.50, 7604.29.50.90, 
7606.12.30.91, 7606.12.30.96, 7608.20.00.30, 7608.20.00.90, 
7609.00.00, 7610.10.00, 7610.90.00, 7615.10.20.15, 7615.10.20.25, 
7615.10.30, 7615.10.30.15, 7615.10.30.25, 7615.10.50.20, 
7615.10.50.40, 7615.10.71, 7615.10.71.25, 7615.10.71.30, 
7615.10.71.55, 7615.10.71.80, 7615.10.91, 7615.10.91.00, 7615.19.10, 
7615.19.30, 7615.19.50, 7615.19.70, 7615.19.90, 7615.20.00, 
7615.20.00.00, 7616.10.90.90, 7616.99.10, 7616.99.50, 7616.99.51, 
8302.10.30.00, 8302.10.60.30, 8302.10.60.60, 8302.10.60.90, 
8302.20.00.00, 8302.30.30.10, 8302.30.30.60, 8302.41.30.00, 
8302.41.60.15, 8302.41.60.45, 8302.41.60.50, 8302.41.60.80, 
8302.42.30.10, 8302.42.30.15, 8302.42.30.65, 8302.49.60.35, 
8302.49.60.45, 8302.49.60.55, 8302.49.60.85, 8302.50.00.00, 
8302.60.90.00, 8305.10.00.50, 8306.30.00.00, 8414.59.60.90, 
8415.90.80.45, 8418.99.80.05, 8418.99.80.50, 8418.99.80.60, 
8419.90.10.00, 8422.90.06.40, 8424.90.90.80, 8473.30.20.00, 
8473.30.51.00, 8479.89.94, 8479.89.98, 8479.90.85.00, 8479.90.94, 
8481.90.90.60, 8481.90.90.85, 8486.90.00.00, 8487.90.00.80, 
8503.00.95.20, 8508.70.00.00, 8513.90.20, 8515.90.20.00, 
8516.90.50.00, 8516.90.80.50, 8517.70.00.00, 8529.90.73.00, 
8529.90.97.60, 8536.90.80.85, 8538.10.00.00, 8541.90.00.00, 
8543.90.88.80, 8543.90.88.85, 8708.10.30.50, 8708.29.50.60, 
8708.29.51.60, 8708.80.65.90, 8708.99.68.90, 8803.30.00.60, 
9013.90.50.00, 9013.90.90.00, 9031.90.90.95, 9031.90.91.95, 
9401.90.50.81, 9401.99.90.81, 9403.10.00, 9403.20.00, 9403.90.10.40, 
9403.90.10.50, 9403.90.10.85, 9403.90.25.40, 9403.90.25.80, 
9403.90.40.05, 9403.90.40.10, 9403.90.40.60, 9403.90.50.05, 
9403.90.50.10, 9403.90.50.80, 9403.90.60.05, 9403.90.60.10, 
9403.90.60.80, 9403.90.70.05, 9403.90.70.10, 9403.90.70.80, 
9403.90.80.10, 9403.90.80.15, 9403.90.80.20, 9403.90.80.41, 
9403.90.80.51, 9403.90.80.61, 9403.99.10.40, 9403.99.90.10, 
9403.99.90.15, 9403.99.90.20, 9403.99.90.41, 9405.99.40.20, 
9506.11.40.80, 9506.51.40.00, 9506.51.60.00, 9506.59.40.40, 
9506.70.20.90, 9506.91.00.10, 9506.91.00.20, 9506.91.00.30, 
9506.99.05.10, 9506.99.05.20, 9506.99.05.30, 9506.99.15.00, 
9506.99.20.00, 9506.99.25.80, 9506.99.28.00, 9506.99.55.00, 
9506.99.60.80, 9507.30.20.00, 9507.30.40.00, 9507.30.60.00, 
9507.30.80.00, 9507.90.60.00, and 9603.90.80.50.
    The subject merchandise entered as parts of other aluminum 
products may be classifiable under the following additional Chapter 
76 subheadings: 7610.10, 7610.90, 7615.19, 7615.20, and 7616.99, as 
well as under other HTSUS chapters. In addition, fin evaporator 
coils may be classifiable under HTSUS numbers: 8418.99.80.50 and 
8418.99.80.60. While HTSUS subheadings are provided for convenience 
and customs purposes, the written description of the scope of these 
Orders is dispositive.

[FR Doc. 2022-13139 Filed 6-16-22; 8:45 am]
BILLING CODE 3510-DS-P