[Federal Register Volume 87, Number 53 (Friday, March 18, 2022)]
[Notices]
[Pages 15366-15367]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-05725]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


Notice of Scope Ruling Applications Filed in Antidumping and 
Countervailing Duty Proceedings

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: The Department of Commerce (Commerce) received scope ruling 
applications, requesting that scope inquiries be conducted to determine 
whether identified products are covered by the scope of antidumping 
duty (AD) and/or countervailing duty (CVD) orders and that Commerce 
issue scope rulings pursuant to those inquiries. In accordance with 
Commerce's regulations, we are notifying the public of the filing of 
the scope ruling applications listed below in the month of February 
2022.

DATES: Applicable March 18, 2022.

FOR FURTHER INFORMATION CONTACT: Brenda E. Brown, AD/CVD Operations, 
Customs Liaison Unit, Enforcement and Compliance, International Trade 
Administration, U.S. Department of Commerce, 1401 Constitution Avenue 
NW, Washington, DC 20230, telephone: (202) 482-4735.

Notice of Scope Ruling Applications

    In accordance with 19 CFR 351.225(d)(3), we are notifying the 
public of the following scope ruling applications related to AD and CVD 
orders and findings filed in or around the month of February 2022. This 
notification includes, for each scope application: (1) Identification 
of the AD and/or CVD orders at issue (19 CFR 351.225(c)(1)); (2) 
concise public descriptions of the products at issue, including the 
physical characteristics (including chemical, dimensional and technical 
characteristics) of the products (19 CFR 351.225(c)(2)(ii)); (3) the 
countries where the products are produced and the countries from where 
the products are exported (19 CFR 351.225(c)(2)(i)(B)); (4) the full 
names of the applicants; and (5) the dates that the scope applications 
were filed with Commerce and the name of the ACCESS scope segment where 
the scope applications can be found.\1\ This notice does not include 
applications which have been rejected and not properly resubmitted. The 
scope ruling applications listed below are available on Commerce's 
online e-filing and document management system, Antidumping and 
Countervailing Duty Electronic Service System (ACCESS), at https://access.trade.gov.
---------------------------------------------------------------------------

    \1\ See Regulations to Improve Administration and Enforcement of 
Antidumping and Countervailing Duty Laws, 86 FR 52300, 52316 
(September 20, 2021) (Final Rule) (``It is our expectation that the 
Federal Register list will include, where appropriate, for each 
scope application the following data: (1) Identification of the AD 
and/or CVD orders at issue; (2) a concise public summary of the 
product's description, including the physical characteristics 
(including chemical, dimensional and technical characteristics) of 
the product; (3) the country(ies) where the product is produced and 
the country from where the product is exported; (4) the full name of 
the applicant; and (5) the date that the scope application was filed 
with Commerce.'')
---------------------------------------------------------------------------

Scope Ruling Applications

    Raw Flexible Magnets from the People's Republic of China (China) 
(A-570-922; C-570-923); Refrigerator door gasket with magnetic band; 
produced in Mexico with magnetic band sourced from either Germany or 
China; \2\ submitted by REHAU Industries, LLC (REHAU); February 4, 
2022; ACCESS scope segments ``Door Gasket.''
---------------------------------------------------------------------------

    \2\ REHAU's product is a refrigerator door gasket with magnetic 
band. It is an extruded PVC gasket incorporating a flexible magnetic 
band inside the gasket. The PVC gasket contains a pocket which 
encases the magnetic band. The magnetic band is not permanently 
affixed to the PVC gasket by an adhesive, a heat process, or 
pressure. The gasket is designed to be used on a specific model of 
refrigerator. The gasket is affixed to the door of refrigerator to 
prevent the loss of cold air from the refrigerator. The PVC gasket 
performs this primary function and the magnetic band provides an 
additional sealing force when the refrigerator door is closed.
    The subject product is manufactured in Mexico with magnetic band 
that is sourced from either Germany or China. In Mexico, the PVC 
gasket is extruded in the shape and size of the refrigerator for 
which it is designed. The incorporation of the magnetic band takes 
place in Mexico. The refrigerator door gasket with magnetic band is 
properly classified in the HTSUS subheading 8418.99.80, which 
provides for, ``Refrigerators, freezers and other refrigerating or 
freezing equipment, electric or other; heat pumps, other than the 
air conditioning machines of heading 8415; parts thereof: Parts: 
Other: Other.''

---------------------------------------------------------------------------

[[Page 15367]]

    Certain Chassis and Subassemblies Thereof from China (A-570-135; C-
570-136); Wheel caps; \3\ produced in and exported from China; 
submitted by Trans Texas Tire, LLC (Texas Tire); February 16, 2022; 
ACCESS scope segments ``Trans Texas Tire--Wheel Caps.''
---------------------------------------------------------------------------

    \3\ Texas Tire's wheel caps are country of origin China as they 
are wholly produced in China. They are then exported from China 
directly to the United States. At entry, the wheel caps are 
classified under the HTSUS subheading 8716.90.5060.
    Subsequent to their importation, they will be installed onto 
wheels for use on marine trailers, utility trailers, and 
recreational vehicles. The wheel caps themselves are stainless steel 
decorative discs that cover the central portion of the wheel. They 
may keep dirt away from the spindle nut and wheel bearings or to 
hide the lug nuts, and/or the bearing. They are not a functional 
part of a vehicle chassis. There are two varieties of substantially 
similar wheel cap at issue. The first is a single piece cap composed 
of stainless steel. The second is a two-piece cap which includes the 
stainless-steel main cap component and a small plastic cap that 
clips onto the front end of the steel cap. The plastic cap can be 
removed so that a technician may better access and lubricate the 
axle. Both varieties are utilized only for marine trailers, utility 
trailers, and recreational vehicles.
---------------------------------------------------------------------------

Notification to Interested Parties

    This list of scope ruling applications is not an identification of 
scope inquiries that have been initiated. In accordance with 19 CFR 
351.225(d)(1), if Commerce has not rejected a scope ruling application 
nor initiated the scope inquiry within 30 days after the filing of the 
application, the application will be deemed accepted and a scope 
inquiry will be deemed initiated the following day--day 31.\4\ 
Commerce's practice generally dictates that where a deadline falls on a 
weekend, Federal holiday, or other non-business day, the appropriate 
deadline is the next business day.\5\ Accordingly, if the 30th day 
after the filing of the application falls on a non-business day, the 
next business day will be considered the ``updated'' 30th day, and if 
the application is not rejected or a scope inquiry initiated by or on 
that particular business day, the application will be deemed accepted 
and a scope inquiry will be deemed initiated on the next business day 
which follows the ``updated'' 30th day.\6\
---------------------------------------------------------------------------

    \4\ In accordance with 19 CFR 351.225(d)(2), within 30 days 
after the filing of a scope ruling application, if Commerce 
determines that it intends to address the scope issue raised in the 
application in another segment of the proceeding (such as a 
circumvention inquiry under 19 CFR 351.226 or a covered merchandise 
inquiry under 19 CFR 351.227), it will notify the applicant that it 
will not initiate a scope inquiry, but will instead determine if the 
product is covered by the scope at issue in that alternative 
segment.
    \5\ See Notice of Clarification: Application of ``Next Business 
Day'' Rule for Administrative Determination Deadlines Pursuant to 
the Tariff Act of 1930, As Amended, 70 FR 24533 (May 10, 2005).
    \6\ This structure maintains the intent of the applicable 
regulation, 19 CFR 351.225(d)(1), to allow day 30 and day 31 to be 
separate business days.
---------------------------------------------------------------------------

    In accordance with 19 CFR 351.225(m)(2), if there are companion AD 
and CVD orders covering the same merchandise from the same country of 
origin, the scope inquiry will be conducted on the record of the AD 
proceeding. Further, please note that pursuant to 19 CFR 351.225(m)(1), 
Commerce may either apply a scope ruling to all products from the same 
country with the same relevant physical characteristics, (including 
chemical, dimensional, and technical characteristics) as the product at 
issue, on a country-wide basis, regardless of the producer, exporter, 
or importer of those products, or on a company-specific basis.
    For further information on procedures for filing information with 
Commerce through ACCESS and participating in scope inquiries, please 
refer to the Filing Instructions section of the Scope Ruling 
Application Guide, at https://access.trade.gov/help/Scope_Ruling_Guidance.pdf. Interested parties, apart from the scope 
ruling applicant, who wish to participate in a scope inquiry and be 
added to the public service list for that segment of the proceeding 
must file an entry of appearance in accordance with 19 CFR 
351.103(d)(1) and 19 CFR 351.225(n)(4). Interested parties are advised 
to refer to the case segment in ACCESS as well as 19 CFR 351.225(f) for 
further information on the scope inquiry procedures, including the 
timelines for the submission of comments.
    Please note that this notice of scope ruling applications filed in 
AD and CVD proceedings may be published before any potential 
initiation, or after the initiation, of a given scope inquiry based on 
a scope ruling application identified in this notice. Therefore, please 
refer to the case segment on ACCESS to determine whether a scope ruling 
application has been accepted or rejected and whether a scope inquiry 
has been initiated.
    Interested parties who wish to be served scope ruling applications 
for a particular AD or CVD order may file a request to be included on 
the annual inquiry service list during the anniversary month of the 
publication of the AD or CVD order in accordance with 19 CFR 351.225(n) 
and Commerce's procedures.\7\
---------------------------------------------------------------------------

    \7\ Scope Ruling Application; Annual Inquiry Service List; and 
Informational Sessions, 86 FR 53205 (September 27, 2021).
---------------------------------------------------------------------------

    Interested parties are invited to comment on the completeness of 
this monthly list of scope ruling applications received by Commerce. 
Any comments should be submitted to James Maeder, Deputy Assistant 
Secretary for AD/CVD Operations, Enforcement and Compliance, 
International Trade Administration, via email to [email protected].
    This notice of scope ruling applications filed in AD and CVD 
proceedings is published in accordance with 19 CFR 351.225(d)(3).

    Dated: March 14, 2022.
James Maeder,
Deputy Assistant Secretary for Antidumping and Countervailing Duty 
Operations.
[FR Doc. 2022-05725 Filed 3-17-22; 8:45 am]
BILLING CODE 3510-DS-P