[Federal Register Volume 86, Number 234 (Thursday, December 9, 2021)]
[Rules and Regulations]
[Pages 69987-69990]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: R1-2021-25005]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2021-0879; Project Identifier MCAI-2020-01494-E; 
Amendment 39-21773; AD 2021-21-13]
RIN 2120-AA64


Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG 
(Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines

Republication

    Editorial Note: Rule document 2021-25005 was originally 
published on pages 64066 through 64068 in the issue of Wednesday,

[[Page 69988]]

November 17, 2021. On page 64068, in the first column, in paragraph 
(a), in the second line, ``January 3, 2022'' should have read 
``December 2, 2021''. The corrected document is republished in its 
entirety.

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule; request for comments.

-----------------------------------------------------------------------

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for 
certain Rolls-Royce Deutschland Ltd. & Co KG (RRD) Trent 1000 model 
turbofan engines. This AD was prompted by the manufacturer revising the 
engine Time Limits Manual (TLM) life limits of certain critical 
rotating parts and direct accumulation counting data files. This AD 
requires the operator to revise the airworthiness limitation section 
(ALS) of their existing approved aircraft maintenance program (AMP) by 
incorporating the revised tasks of the applicable TLM for each affected 
model turbofan engine, as specified in a European Union Aviation Safety 
Agency (EASA) AD, which is incorporated by reference. The FAA is 
issuing this AD to address the unsafe condition on these products.

DATES: This AD is effective December 2, 2021.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in this AD as of December 2, 
2021.
    The FAA must receive comments on this AD by January 3, 2022.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 
11.43 and 11.45, by any of the following methods:
     Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.
     Fax: (202) 493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE, Washington, DC 20590.
     Hand Delivery: Deliver to Mail address above between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
    For material incorporated by reference in this AD, contact EASA, 
Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; phone: +49 221 8999 
000; email: [email protected]. You may find this material on the EASA 
website at https://ad.easa.europa.eu. You may view this material at the 
FAA, Airworthiness Products Section, Operational Safety Branch, 1200 
District Avenue, Burlington, MA 01803. For information on the 
availability of this material at the FAA, call (781) 238-7759. It is 
also available in the AD docket at https://www.regulations.gov by 
searching for and locating Docket No. FAA-2021-0879.

Examining the AD Docket

    You may examine the AD docket at https://www.regulations.gov by 
searching for and locating Docket No. FAA-2021-0879; or in person at 
Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, 
except Federal holidays. The AD docket contains this AD, the EASA AD, 
any comments received, and other information. The street address for 
Docket Operations is listed above.

FOR FURTHER INFORMATION CONTACT: Kevin M. Clark, Aviation Safety 
Engineer, ECO Branch, FAA, 1200 District Avenue, Burlington, MA 01803; 
phone: (781) 238-7088; email: [email protected].

SUPPLEMENTARY INFORMATION:

Background

    EASA, which is the Technical Agent for the Member States of the 
European Union, has issued EASA AD 2020-0242, dated November 5, 2020 
(EASA AD 2020-0242) (also referred to as the Mandatory Continuing 
Airworthiness Information, or the MCAI), to correct an unsafe condition 
for certain RRD Trent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000-
CE, Trent 1000-D, Trent 1000-E, Trent 1000-G, and Trent 1000-H model 
turbofan engines.
    This AD was prompted by the manufacturer revising the engine TLM 
life limits of certain critical rotating parts and updating certain 
maintenance tasks. The FAA is issuing this AD to address the failure of 
critical rotating parts.

FAA's Determination

    These engines have been approved by the aviation authority of 
another country and are approved for operation in the United States. 
Pursuant to the FAA's bilateral agreement with the State of Design 
Authority, the FAA has been notified about the unsafe condition 
described in the EASA AD referenced in this proposed AD. The FAA is 
issuing this AD because the agency evaluated all the relevant 
information provided by EASA and determined the unsafe condition 
described previously is likely to exist or develop in other products of 
the same type design.

Related Service Information Under 1 CFR Part 51

    The FAA reviewed EASA AD 2020-0242. EASA AD 2020-0242 specifies 
procedures for revising the approved AMP by incorporating the 
limitations, tasks, and associated thresholds and intervals described 
in the TLM.
    This material is reasonably available because the interested 
parties have access to it through their normal course of business or by 
the means identified in ADDRESSES.

Other Related Service Information

    The FAA reviewed Chapter 05-10 of Rolls-Royce (RR) Trent 1000 TLM 
T-TRENT-10RRB, dated August 1, 2020. RR Trent 1000 TLM T-TRENT-10RRB, 
Chapter 05-10, identifies the reduced life limits of certain critical 
rotating parts.
    The FAA also reviewed Chapter 05-20 of RR Trent 1000 TLM T-TRENT-
10RRB, dated August 1, 2020. RR Trent 1000 TLM T-TRENT-10RRB, Chapter 
05-20, identifies the critical rotating part inspection thresholds and 
intervals.

AD Requirements

    This AD requires accomplishing the actions specified in EASA AD 
2020-0242, described previously, as incorporated by reference, except 
for any differences identified as exceptions in the regulatory text of 
this AD and except as discussed under ``Differences Between this AD and 
the MCAI.''

Explanation of Required Compliance Information

    In the FAA's ongoing efforts to improve the efficiency of the AD 
process, the FAA developed a process to use some civil aviation 
authority (CAA) ADs as the primary source of information for compliance 
with requirements for corresponding FAA ADs. The FAA has since 
coordinated with other manufacturers and civil aviation authorities 
(CAAs) to use this process. As a result, EASA AD 2020-0242 will be 
incorporated in this final rule. This AD, therefore, requires 
compliance with EASA AD 2020-0242 in its entirety through that 
incorporation, except for any differences identified as exceptions in 
the regulatory text of this AD. Using common terms that are the same as 
the heading of a particular section in EASA AD 2020-0242 does not mean 
that operators need comply only with that section. For example, where 
the AD requirement refers to ``all required actions and compliance 
times,'' compliance with this AD requirement is not limited to the 
section titled ``Required Action(s) and Compliance Time(s)'' in EASA AD 
2020-0242. Service information required by EASA AD 2020-0242 for 
compliance will be available at https://www.regulations.gov by 
searching for and locating Docket No. FAA-2021-0879.

[[Page 69989]]

Differences Between This AD and the MCAI

    This AD does not mandate the ``Maintenance Tasks and Replacement of 
Critical Parts'' and ``Corrective Action(s)'' sections of EASA AD 2020-
0242. Where EASA AD 2020-0242 requires compliance from its effective 
date, this AD requires using the effective date of this AD. Where EASA 
AD 2020-0242 requires revising the approved AMP within 12 months from 
its effective date, this AD requires revising the existing approved AMP 
within 90 days after the effective date of this AD. This AD does not 
mandate compliance with the ``Remarks'' section of EASA AD 2020-0242.

Justification for Immediate Adoption and Determination of the Effective 
Date

    Section 553(b)(3)(B) of the Administrative Procedure Act (APA) (5 
U.S.C. 551 et seq.) authorizes agencies to dispense with notice and 
comment procedures for rules when the agency, for ``good cause'' finds 
that those procedures are ``impracticable, unnecessary, or contrary to 
the public interest.'' Under this section, an agency, upon finding good 
cause, may issue a final rule without seeking comment prior to 
issuance. Further, section 553(d) of the APA authorizes agencies to 
make rules effective in less than thirty days, upon a finding of good 
cause.
    The FAA justifies waiving notice and comment prior to adoption of 
this rule because no domestic operators use this product. It is 
unlikely that the FAA will receive any adverse comments or useful 
information about this AD from any U.S. operator. Accordingly, notice 
and opportunity for prior public comment are unnecessary, pursuant to 5 
U.S.C. 553(b)(3)(B). In addition, for the foregoing reason, the FAA 
finds that good cause exists pursuant to 5 U.S.C. 553(d) for making 
this amendment effective in less than 30 days.

Comments Invited

    The FAA invites you to send any written relevant data, views, or 
arguments about this final rule. Send your comments to an address 
listed under ADDRESSES. Include ``Docket No. FAA-2021-0879; Project 
Identifier MCAI-2020-01494-E'' at the beginning of your comments. The 
most helpful comments reference a specific portion of the final rule, 
explain the reason for any recommended change, and include supporting 
data. The FAA will consider all comments received by the closing date 
and may amend this final rule because of those comments.
    Except for Confidential Business Information (CBI) as described in 
the following paragraph, and other information as described in 14 CFR 
11.35, the FAA will post all comments received, without change, to 
https://www.regulations.gov, including any personal information you 
provide. The agency will also post a report summarizing each 
substantive verbal contact received about this final rule.

Confidential Business Information

    CBI is commercial or financial information that is both customarily 
and actually treated as private by its owner. Under the Freedom of 
Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public 
disclosure. If your comments responsive to this AD contain commercial 
or financial information that is customarily treated as private, that 
you actually treat as private, and that is relevant or responsive to 
this AD, it is important that you clearly designate the submitted 
comments as CBI. Please mark each page of your submission containing 
CBI as ``PROPIN.'' The FAA will treat such marked submissions as 
confidential under the FOIA, and they will not be placed in the public 
docket of this AD. Submissions containing CBI should be sent to Kevin 
M. Clark, Aviation Safety Engineer, ECO Branch, FAA, 1200 District 
Avenue, Burlington, MA 01803. Any commentary that the FAA receives that 
is not specifically designated as CBI will be placed in the public 
docket for this rulemaking.

Regulatory Flexibility Act

    The requirements of the Regulatory Flexibility Act (RFA) do not 
apply when an agency finds good cause pursuant to 5 U.S.C. 553 to adopt 
a rule without prior notice and comment. Because the FAA has determined 
that it has good cause to adopt this rule without notice and comment, 
RFA analysis is not required.

Costs of Compliance

    The FAA estimates that this AD affects 0 engines installed on 
airplanes of U.S. registry. The FAA estimates the following costs to 
comply with this AD:

                                                 Estimated Costs
----------------------------------------------------------------------------------------------------------------
                                                                                     Cost per      Cost on U.S.
                Action                         Labor cost           Parts cost        product        operators
----------------------------------------------------------------------------------------------------------------
Revise the ALS of the AMP.............  1 work-hour x $85 per                 $0             $85              $0
                                         hour = $85.
----------------------------------------------------------------------------------------------------------------

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or develop on products identified in this rulemaking action.

Regulatory Findings

    This AD will not have federalism implications under Executive Order 
13132. This AD will not have a substantial direct effect on the States, 
on the relationship between the national Government and the States, or 
on the distribution of power and responsibilities among the various 
levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866, and
    (2) Will not affect intrastate aviation in Alaska.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

[[Page 69990]]

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13   [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive:

2021-21-13 Rolls-Royce Deutschland Ltd & Co KG (Type Certificate 
previously held by Rolls-Royce plc): Amendment 39-21773; Docket No. 
FAA-2021-0879; Project Identifier MCAI-2020-01494-E.

(a) Effective Date

    This airworthiness directive (AD) is effective December 2, 2021.

 (b) Affected ADs

    None.

 (c) Applicability

    This AD applies to Rolls-Royce Deutschland Ltd. & Co KG (RRD) 
(Type Certificate previously held by Rolls-Royce plc) Trent 1000-A, 
Trent 1000-AE, Trent 1000-C, Trent 1000-CE, Trent 1000-D, Trent 
1000-E, Trent 1000-G, and Trent 1000-H model turbofan engines.

 (d) Subject

    Joint Aircraft System Component (JASC) Code 7200, Engine 
(Turbine/Turboprop).

 (e) Unsafe Condition

    This AD was prompted by the manufacturer revising the engine 
Time Limits Manual life limits of certain critical rotating parts 
and direct accumulation counting data files. The FAA is issuing this 
AD to prevent the failure of critical rotating parts. The unsafe 
condition, if not addressed, could result in failure of one or more 
engines, loss of thrust control, and loss of the airplane.

 (f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

 (g) Required Actions

    Except as specified in paragraph (h) of this AD: Perform all 
required actions within the compliance times specified in, and in 
accordance with, EASA AD 2020-0242, dated November 5, 2020 (EASA AD 
2020-0242).

 (h) Exceptions to EASA AD 2020-0242

    (1) The requirements specified in paragraphs (1) and (2) of EASA 
AD 2020-0242 are not required by this AD.
    (2) Where EASA AD 2020-0242 requires compliance from its 
effective date, this AD requires using the effective date of this 
AD.
    (3) Paragraph (3) of EASA AD 2020-0242 specifies revising the 
approved aircraft maintenance program (AMP) within 12 months after 
its effective date, but this AD requires revising the existing 
approved AMP within 90 days after the effective date of this AD.
    (4) This AD does not mandate compliance with the ``Remarks'' 
section of EASA AD 2020-0242.

 (i) Alternative Methods of Compliance (AMOCs)

    (1) The Manager, ECO Branch, FAA, has the authority to approve 
AMOCs for this AD, if requested using the procedures found in 14 CFR 
39.19. In accordance with 14 CFR 39.19, send your request to your 
principal inspector or local Flight Standards District Office, as 
appropriate. If sending information directly to the manager of the 
ECO Branch, send it to the attention of the person identified in 
paragraph (j) of this AD. Information may be emailed to: [email protected].
    (2) Before using any approved AMOC, notify your appropriate 
principal inspector, or lacking a principal inspector, the manager 
of the local flight standards district office/certificate holding 
district office.

 (j) Related Information

    For more information about this AD, contact Kevin M. Clark, 
Aviation Safety Engineer, ECO Branch, FAA, 1200 District Avenue, 
Burlington, MA 01803; phone: (781) 238-7088; email: 
[email protected].

 (k) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless this AD specifies otherwise.
    (i) European Union Aviation Safety Agency (EASA) AD 2020-0242, 
dated November 5, 2020.
    (ii) [Reserved]
    (3) For EASA AD 2020-0242, contact the EASA, Konrad-Adenauer-
Ufer 3, 50668 Cologne, Germany; phone: +49 221 8999 000; email: 
[email protected]. You may find this EASA AD on the EASA website at 
https://ad.easa.europa.eu.
    (4) You may view this service information at the FAA, 
Airworthiness Products Section, Operational Safety Branch, 1200 
District Avenue, Burlington, MA 01803. For information on the 
availability of this material at the FAA, call (781) 238-7759. This 
material may be found in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-
2021-0879.
    (5) You may view this material that is incorporated by reference 
at the National Archives and Records Administration (NARA). For 
information on the availability of this material at NARA, email: 
[email protected], or go to https://www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued on October 8, 2021.
Gaetano A. Sciortino,
Deputy Director for Strategic Initiatives, Compliance & Airworthiness 
Division, Aircraft Certification Service.
[FR Doc. R1-2021-25005 Filed 12-8-21; 8:45 am]
BILLING CODE 0099-10-D