[Federal Register Volume 86, Number 159 (Friday, August 20, 2021)]
[Notices]
[Pages 46826-46830]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-17865]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-570-133, C-570-134]


Certain Metal Lockers and Parts Thereof From the People's 
Republic of China: Antidumping and Countervailing Duty Orders

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: Based on the affirmative final determinations by the 
Department of Commerce (Commerce) and the International Trade 
Commission (ITC), Commerce is issuing antidumping duty (AD) and 
countervailing duty (CVD) orders on certain metal lockers and parts 
thereof (metal lockers) from the People's Republic of China (China).

DATES: Applicable August 20, 2021.

FOR FURTHER INFORMATION CONTACT: Laurel LaCivita or Patrick Barton at 
(202) 482-4243 or (202) 482-0012, respectively (AD), and Alex Cipolla 
or Charles Doss at (202) 482-4956 or (202) 482-4474, respectively 
(CVD); AD/CVD Operations, Office III, Enforcement and Compliance, 
International Trade Administration, U.S. Department of Commerce, 1401 
Constitution Avenue NW, Washington, DC 20230.

SUPPLEMENTARY INFORMATION:

Background

    In accordance with sections 705(d) and 735(d) of the Tariff Act of 
1930, as amended (the Act), on July 7, 2021, Commerce published its 
affirmative final determinations in the CVD and less-than-fair-value 
(LTFV) investigations of metal lockers from China.\1\ On August 13, 
2021, the ITC notified Commerce of its final determinations, pursuant 
to sections 705(d) and 735(d) of the Act, that an industry in the 
United States is materially injured by reason of subsidized and LTFV 
imports of metal lockers from China, within the meaning of sections 
705(b)(1)(A)(i) and 735(b)(1)(A)(i) of the Act.\2\
---------------------------------------------------------------------------

    \1\ See Certain Metal Lockers and Parts Thereof from the 
People's Republic of China: Final Affirmative Determination of Sales 
at Less Than Fair Value, 86 FR 35737 (July 7, 2021) (LTFV Final 
Determination); and Certain Metal Lockers and Parts Thereof from the 
People's Republic of China: Final Affirmative Countervailing Duty 
Determination, 86 FR 35741 (July 7, 2021).
    \2\ See ITC Notification Letter, Investigation Nos. 701-TA-639 
and 641-642 and 731-TA-1475-1479, 1481-1483, and 1485-1492 (Final) 
dated August 13, 2021 (ITC Notification Letter).
---------------------------------------------------------------------------

Scope of the Orders

    The products covered by these orders are metal lockers from China. 
For a full description of the scope of these orders,see the Appendix to 
this notice.

AD Order

    As stated above, on August 13, 2021, in accordance with section 
735(d) of the Act, the ITC notified Commerce of its final determination 
that an industry in the United States is materially injured within the 
meaning of section 735(b)(1)(A)(i) of the Act by reason of imports of 
metal lockers from China that are sold in the United States at LTFV.\3\ 
Therefore, in accordance with sections 735(c)(2) and 736 of the Act, 
Commerce is issuing this AD order. Because the ITC determined that LTFV 
imports of metal lockers from China are materially injuring a U.S. 
industry, unliquidated entries of subject merchandise from China, 
entered or withdrawn from warehouse, for consumption, are subject to 
the assessment of antidumping duties.
---------------------------------------------------------------------------

    \3\ See ITC Notification Letter.
---------------------------------------------------------------------------

    Therefore, in accordance with section 736(a)(1) of the Act, 
Commerce intends to direct U.S. Customs and Border Protection (CBP) to 
assess, upon further instruction by Commerce, antidumping duties equal 
to the amount by which the normal value of the merchandise exceeds the 
export price (or constructed export price) of the merchandise for all 
relevant entries of metal lockers from China. Antidumping duties will 
be assessed on unliquidated entries of metal lockers from China 
entered, or withdrawn from warehouse, for consumption on or after 
February 11, 2021, the date of publication of the AD Preliminary 
Determination, but will not include entries occurring after the 
expiration of the provision measures period and before publication of 
the ITC's final injury determination, as further described below.\4\
---------------------------------------------------------------------------

    \4\ See Certain Metal Lockers and Parts Thereof from the 
People's Republic of China: Preliminary Affirmative Determination of 
Sales at Less Than Fair Value, Postponement of Final Determination 
and Extension of Provisional Measures, 86 FR 9051 (February 11, 
2021) (AD Preliminary Determination).

---------------------------------------------------------------------------

[[Page 46827]]

Continuation of Suspension of Liquidation--AD

    Except as noted in the ``Provisional Measures--AD'' section of this 
notice, in accordance with section 735(c)(1)(B) of the Act, Commerce 
intends to instruct CBP to continue to suspend liquidation on all 
relevant entries of metal lockers from China entered, or withdrawn from 
warehouse for consumption on or after the date of publication of the 
ITC's final affirmative injury determination in the Federal Register. 
These instructions suspending liquidation will remain in effect until 
further notice.
    For each producer and exporter combination, Commerce also intends 
to instruct CBP to require cash deposits equal to the estimated 
weighted-average dumping margins indicated in the tables below, 
adjusted by the relevant subsidy offsets. Accordingly, effective on the 
date of publication in the Federal Register of the notice of the ITC's 
final affirmative injury determinations, CBP must require, at the same 
time as importers would normally deposit estimated duties on subject 
merchandise, a cash deposit equal to the rates listed in the table 
below: \5\
---------------------------------------------------------------------------

    \5\ See section 736(a)(3) of the Act.

----------------------------------------------------------------------------------------------------------------
                                                                                               Cash deposit rate
                                                                                Estimated        (adjusted for
                  Exporter                              Producer            weighted- average   subsidy offsets)
                                                                              dumping margin       (percent)
----------------------------------------------------------------------------------------------------------------
Zhejiang Xingyi Metal Products Co., Ltd./    Zhejiang Xingyi Metal                      21.25              10.71
 Xingyi Metalworking Technology (Zhejiang)    Products Co., Ltd./Xingyi
 Co., Ltd.                                    Metalworking Technology
                                              (Zhejiang) Co., Ltd.
Geelong Sales (Macao Commercial Offshore)    Zhongshan Geelong                          21.25              10.71
 Limited (a.k.a. Geelong Sales (MCO)          Manufacturing Co. Ltd.
 Limited, Geelong Sales (Macao Commercial)
 Limited, and Geelong Sales (MC) Limited).
Hangzhou Evernew Machinery & Equipment       Zhejiang Yinghong Metalworks               21.25              10.71
 Company Limited.                             Co., Ltd.
Hangzhou Zhuoxu Trading Co., Ltd...........  Shanghai Asi Building                      21.25              10.71
                                              Materials Co., Ltd.
Hangzhou Zhuoxu Trading Co., Ltd...........  Luoyang Mingxiu Office                     21.25              10.71
                                              Furniture Co., Ltd.
Hangzhou Zhuoxu Trading Co., Ltd...........  Luoyang Wandefu Import and                 21.25              10.71
                                              Export Trading Co. Ltd.
Hangzhou Zhuoxu Trading Co., Ltd...........  Zhejiang Xingyi Metal                      21.25              10.71
                                              Products Co., Ltd.
Jiaxing Haihong Mechanical and Electrical    Zhejiang Steelrix Office                   21.25              10.71
 Technology Co. Ltd.                          Furniture Co., Ltd.
Kunshan Dongchu Precision Machinery Co.,     Kunshan Dongchu Precision                  21.25              10.71
 Ltd.                                         Machinery Co., Ltd.
Luoyang Hynow Import and Export Co., Ltd...  Luoyang Jiudu Golden Cabinet               21.25              10.71
                                              Co., Ltd.
Luoyang Shidiu Import and Export Co., Ltd..  Luoyang Yuabo Office                       21.25              10.71
                                              Machinery Co., Ltd.
Luoyang Steelart Office Furniture Co., Ltd.  Luoyang Yongwei Office                     21.25              10.71
                                              Furniture Co., Ltd.
Luoyang Steelart Office Furniture Co., Ltd.  Luoyang Zhuofan Steel Product              21.25              10.71
                                              Factory.
Luoyang Steelart Office Furniture Co., Ltd.  Luoyang Flyer Office                       21.25              10.71
                                              Furniture Co., Ltd.
Pinghu Chenda Storage Office Co., Ltd......  Pinghu Chenda Storage Office               21.25              10.71
                                              Co., Ltd.
Tianjin Jia Mei Metal Furniture Ltd........  Tianjin Jia Mei Metal                      21.25              10.71
                                              Furniture Ltd.
China-Wide Entity..........................  .............................             322.25             311.71
----------------------------------------------------------------------------------------------------------------

    Because the estimated weighted-average dumping margin is zero for 
subject merchandise produced by Hangzhou Jusheng Metal Products Co., 
Ltd. and exported by Hangzhou Xline Machinery & Equipment Co., Ltd., 
entries of shipments of subject merchandise from this producer/exporter 
combination are excluded from the AD order on subject merchandise from 
China. On the basis of the LTFV Final Determination for this producer/
exporter combination, we ordered CBP to liquidate entries of subject 
merchandise for this producer/exporter combination, entered or 
withdrawn from warehouse, for consumption on or after February 11, 
2021, without regard to duties and to refund cash deposits. This 
exclusion will not be applicable to merchandise exported to the United 
States by these respondents in any other producer/exporter combination 
or by third parties that sourced subject merchandise from the excluded 
producer/exporter combinations.

Provisional Measures--AD

    Section 733(d) of the Act states that suspension of liquidation 
pursuant to an affirmative preliminary determination may not remain in 
effect for more than four months, except where exporters representing a 
significant proportion of exports of the subject merchandise request 
that Commerce extend the four-month period to no more than six months. 
At the request of exporters that account for a significant proportion 
of metal lockers from China, Commerce extended the four-month period to 
six months in this AD investigation.\6\ Commerce published the AD 
Preliminary Determination in this investigation on February 11, 
2021.\7\
---------------------------------------------------------------------------

    \6\ See AD Preliminary Determination, 86 FR at 9053.
    \7\ See AD Preliminary Determination.
---------------------------------------------------------------------------

    Therefore, the extended provisional measures period, beginning on 
the date of publication of the AD Preliminary Determination, ended on 
August 9, 2021. Therefore, in accordance with section 733(d) of the 
Act, Commerce will instruct CBP to terminate the suspension of 
liquidation and to liquidate, without regard to antidumping duties, 
unliquidated entries of metal lockers from China entered, or withdrawn 
from warehouse, for consumption after August 9, 2021, the final day on 
which the provisional measures were in effect, until and through the 
day preceding the date of publication of the ITC's final affirmative 
injury determinations in the Federal Register. Suspension of 
liquidation and the collection of cash deposits will resume on the date 
of publication of the ITC's final determinations in the Federal 
Register.

CVD Order

    As stated above, on August 13, 2021, in accordance with section 
705(d) of the Act, the ITC notified Commerce of its final determination 
that an industry in

[[Page 46828]]

the United States is materially injured within the meaning of section 
705(b)(1)(A)(i) of the Act by reason of subsidized imports of metal 
lockers from China.\8\ Therefore, in accordance with sections 705(c)(2) 
and 706 of the Act, Commerce is issuing this CVD order. Because the ITC 
determined that subsidized imports of metal lockers from China are 
materially injuring a U.S. industry, unliquidated entries of subject 
merchandise from China entered, or withdrawn from warehouse, for 
consumption, are subject to the assessment of countervailing duties.
---------------------------------------------------------------------------

    \8\ See ITC Notification Letter.
---------------------------------------------------------------------------

    Therefore, in accordance with section 706(a)(1) of the Act, 
Commerce intends to direct CBP to assess, upon further instruction by 
Commerce, countervailing duties on unliquidated entries of subject 
merchandise from China entered, or withdrawn from warehouse, for 
consumption on or after December 14, 2020, the date of publication of 
the CVD Preliminary Determination, but will not include entries 
occurring after the expiration of the provisional measure period and 
before the publication of the ITC's final injury determination under 
section 705(b) of the Act, as further described in the ``Provisional 
Measures--CVD'' section of this notice.\9\
---------------------------------------------------------------------------

    \9\ See Certain Metal Lockers and Parts Thereof from the 
People's Republic of China: Preliminary Affirmative Countervailing 
Duty Determination and Alignment of Final Determination with Final 
Antidumping Duty Determination, 85 FR 80771 (December 14, 2020) (CVD 
Preliminary Determination).
---------------------------------------------------------------------------

Suspension of Liquidation and Cash Deposits--CVD

    In accordance with section 706 of the Act, Commerce intends to 
instruct CBP to reinstitute the suspension of liquidation of all 
relevant entries of metal lockers from China, effective on the date of 
publication of the ITC's final affirmative injury determination in the 
Federal Register, and to assess, upon further instruction by Commerce, 
pursuant to section 706(a)(1) of the Act, countervailing duties for 
each entry of subject merchandise in an amount based on the net 
countervailable subsidy rates below. On or after the date of 
publication of the ITC's final injury determination in the Federal 
Register, CBP must require, at the same time as importers would 
normally deposit estimated duties on subject merchandise, a cash 
deposit for each entry of subject merchandise equal to the subsidy 
rates listed below.\10\ These instructions suspending liquidation will 
remain in effect until further notice. The all-others rate applies to 
all producers or exporters not specifically listed below, as 
appropriate:
---------------------------------------------------------------------------

    \10\ See section 706(a)(3) of the Act.

------------------------------------------------------------------------
                                                                Subsidy
                           Company                               rate
                                                               (percent)
------------------------------------------------------------------------
Zhejiang Xingyi Metal Products Co., Ltd.....................       24.66
Changshu Taron Machinery Equipment Manufacturing Co., Ltd...      131.51
Guangdong Yuhua Building Materials Co., Ltd.................      131.51
Jiangsu Tongrun Tool Cabinet Co., Ltd.......................      131.51
Luoyang Mas Younger Office Furniture Co./Luoyang Mas Younger      131.51
 Export and Import Co.......................................
Luoyang Shidiu Import and Export Co., Ltd...................      131.51
Suzhou Yuanda Commercial Products Co. Ltd...................      131.51
Winnsen Industry Co., Ltd...................................      131.51
Xiamen Headleader Technology................................      131.51
All Others..................................................       24.66
------------------------------------------------------------------------

Provisional Measures--CVD

    Section 703(d) of the Act states that the suspension of liquidation 
pursuant to an affirmative preliminary determination may not remain in 
effect for more than four months. Commerce published the CVD 
Preliminary Determination on December 14, 2020.\11\ Accordingly, the 
provisional measures period, beginning on the date of publication of 
the CVD Preliminary Determination, ended on April 12, 2021. Pursuant to 
section 707(b) of the Act, the collection of cash deposits at the rates 
listed above will begin on the date of publication of the ITC's final 
affirmative injury determination.
---------------------------------------------------------------------------

    \11\ See CVD Preliminary Determination.
---------------------------------------------------------------------------

    Therefore, in accordance with section 703(d) of the Act, Commerce 
instructed CBP to terminate the suspension of liquidation and to 
liquidate, without regard to countervailing duties, unliquidated 
entries of metal lockers from China entered, or withdrawn from 
warehouse, for consumption, after April 12, 2021, the date on which the 
provisional measures expired. Suspension of liquidation will resume on 
the date of publication of the ITC's final affirmative injury 
determinations in the Federal Register.

Notification to Interested Parties

    This notice constitutes the AD and CVD orders with respect to metal 
lockers from China pursuant to sections 706(a) and 736(a) of the Act. 
Interested parties can find a list of orders currently in effect at 
http://enforcement.trade.gov/stats/iastats1.html.
    These orders are published in accordance with sections 706(a) and 
736(a) of the Act and 19 CFR 351.211(b).

    Dated: August 16, 2021.
Christian Marsh,
Acting Assistant Secretary for Enforcement and Compliance.

Appendix

Scope of the Orders

    The scope of the orders covers certain metal lockers, with or 
without doors, and parts thereof (metal lockers). The subject metal 
lockers are secure metal storage devices less than 27 inches wide 
and less than 27 inches deep, whether floor standing, installed onto 
a base or wall-mounted. In a multiple locker assembly (whether a 
welded locker unit, otherwise assembled locker unit or knocked down 
unit or kit), the width measurement shall be based on the width of 
an individual locker not the overall unit dimensions. All 
measurements in this scope are based on actual measurements taken on 
the outside dimensions of the single-locker unit. The height is the 
vertical measurement from the bottom to the top of the unit. The 
width is the horizontal (side to side) measurement of the front of 
the unit, and the front of the unit is the face with the door or 
doors or the opening for internal access of the unit if configured 
without a door. The depth is the measurement from the front to the 
back of the unit. The subject certain metal lockers typically 
include the bodies (back, side, shelf, top and bottom panels), door 
frames with or without doors which can be integrated into the sides 
or made separately, and doors.
    The subject metal lockers typically are made of flat-rolled 
metal, metal mesh and/or expanded metal, which includes but is not 
limited to alloy or non-alloy steel (whether or not galvanized or 
otherwise metallically coated for corrosion resistance), stainless 
steel, or aluminum, but the doors may also include transparent 
polycarbonate, Plexiglas or similar transparent material or any 
combination thereof. Metal mesh refers to both wire mesh and 
expanded metal mesh. Wire mesh is a wire product in which the 
horizontal and transverse wires are welded at the cross-section in a 
grid pattern. Expanded metal mesh is made by slitting and stretching 
metal sheets to make a screen of diamond or other shaped openings.
    Where the product has doors, the doors are typically configured 
with or for a handle or other device or other means that permit the 
use of a mechanical or electronic lock or locking mechanism, 
including, but not limited to: A combination lock, a padlock, a key 
lock (including cylinder locks) lever or knob lock, electronic key 
pad, or other electronic or wireless lock. The handle and locking 
mechanism, if included, need not be integrated into one another. The 
subject locker may or may not also enter with the lock or locking 
device included or installed. The doors or body panels may also 
include vents (including wire mesh or expanded metal mesh vents) or 
perforations. The bodies, body components and doors are typically 
powder coated, otherwise painted

[[Page 46829]]

or epoxy coated or may be unpainted. The subject merchandise 
includes metal lockers imported either as welded or otherwise 
assembled units (ready for installation or use) or as knocked down 
units or kits (requiring assembly prior to installation or use).
    The subject lockers may be shipped as individual or multiple 
locker units preassembled, welded, or combined into banks or tiers 
for ease of installation or as sets of component parts, bulk packed 
(i.e., all backs in one package, crate, rack, carton or container 
and sides in another package, crate, rack, carton or container) or 
any combination thereof. The knocked down lockers are shipped 
unassembled requiring a supplier, contractor or end-user to assemble 
the individual lockers and locker banks prior to installation.
    The scope also includes all parts and components of lockers made 
from flat-rolled metal or expanded metal (e.g., doors, frames, 
shelves, tops, bottoms, backs, side panels, etc.) as well as 
accessories that are attached to the lockers when installed 
(including, but not limited to, slope tops, bases, expansion filler 
panels, dividers, recess trim, decorative end panels, and end caps) 
that may be imported together with lockers or other locker 
components or on their own. The particular accessories listed for 
illustrative purposes are defined as follows:
    a. Slope tops: Slope tops are slanted metal panels or units that 
fit on the tops of the lockers and that slope from back to front to 
prevent the accumulation of dust and debris on top of the locker and 
to discourage the use of the tops of lockers as storage areas. Slope 
tops come in various configurations including, but not limited to, 
unit slope tops (in place of flat tops), slope hoods made of a back, 
top and end pieces which fit over multiple units and convert flat 
tops to a sloping tops, and slope top kits that convert flat tops to 
sloping tops and include tops, backs and ends.
    b. Bases: Locker bases are panels made from flat-rolled metal 
that either conceal the legs of the locker unit, or for lockers 
without legs, provide a toe space in the front of the locker and 
conceal the flanges for floor anchoring.
    c. Expansion filler panel: Expansion filler panels or fillers 
are metal panels that attach to locker units to cover columns, pipes 
or other obstacles in a row of lockers or fill in gaps between the 
locker and the wall. Fillers may also include metal panels that are 
used on the sides or the top of the lockers to fill gaps.
    d. Dividers: Dividers are metal panels that divide the space 
within a locker unit into different storage areas.
    e. Recess trim: Recess trim is a narrow metal trim that bridges 
the gap between lockers and walls or soffits when lockers are 
recessed into a wall.
    f. Decorative end panels: End panels fit onto the exposed ends 
of locker units to cover holes, bolts, nuts, screws and other 
fasteners. They typically are painted to match the lockers.
    g. End caps: End caps fit onto the exposed ends of locker units 
to cover holes, bolts, nuts, screws and other fasteners.
    The scope also includes all hardware for assembly and 
installation of the lockers and locker banks that are imported with 
or shipped, invoiced, or sold with the imported locker or locker 
system except the lock.
    Excluded from the scope are wire mesh lockers. Wire mesh lockers 
are those with each of the following characteristics:
    (1) At least three sides, including the door, made from wire 
mesh;
    (2) the width and depth each exceed 25 inches; and
    (3) the height exceeds 90 inches.
    Also excluded are lockers with bodies made entirely of plastic, 
wood, or any nonmetallic material.
    Also excluded are exchange lockers with multiple individual 
locking doors mounted on one master locking door to access multiple 
units. Excluded exchange lockers have multiple individual storage 
spaces, typically arranged in tiers, with access doors for each of 
the multiple individual storage space mounted on a single frame that 
can be swung open to allow access to all of the individual storage 
spaces at once. For example, uniform or garment exchange lockers are 
designed for the distinct function of securely and hygienically 
exchanging clean and soiled uniforms. Thus, excluded exchange 
lockers are a multi-access point locker whereas covered lockers are 
a single access point locker for personal storage. The excluded 
exchange lockers include assembled exchange lockers and those that 
enter in `knock down' form in which all of the parts and components 
to assemble a completed exchange locker unit are packaged together. 
Parts for exchange lockers that are imported separately from the 
exchange lockers in `knock down' form are not excluded.
    Also excluded are metal lockers that are imported with an 
installed electronic, internet-enabled locking device that permits 
communication or connection between the locker's locking device and 
other internet connected devices.
    Also excluded are locks and hardware and accessories for 
assembly and installation of the lockers, locker banks and storage 
systems that are separately imported in bulk and are not 
incorporated into a locker, locker system or knocked down kit at the 
time of importation. Such excluded hardware and accessories include 
but are not limited to locks and bulk imported rivets, nuts, bolts, 
hinges, door handles, door/frame latching components, and coat 
hooks. Accessories of sheet metal, including but not limited to end 
panels, bases, dividers and sloping tops, are not excluded 
accessories.
    Mobile tool chest attachments that meet the physical description 
above are covered by the scope of the orders, unless such 
attachments are covered by the scope of the orders on certain tool 
chests and cabinets from China. If the orders on certain tool chests 
and cabinets from China are revoked, the mobile tool chest 
attachments from China will be covered by the scope of the orders.
    The scope also excludes metal safes with each of the following 
characteristics: (1) Pry resistant, concealed hinges; (2) body walls 
and doors of steel that are at least 17 gauge (0.05625 inch or 
1.42874 mm thick); and (3) an integrated locking mechanism that 
includes at least two round steel bolts 0.75 inch (19 mm) or larger 
in diameter; or three bolts 0.70 inch (17.78 mm) or more in 
diameter; or four or more bolts at least 0.60 inch (15.24 mm) or 
more in diameter, that project from the door into the body or frame 
of the safe when in the locked position.
    The scope also excludes gun safes meeting each of the following 
requirements:
    (1) Shall be able to fully contain firearms and provide for 
their secure storage.
    (2) Shall have a locking system consisting of at minimum a 
mechanical or electronic combination lock. The mechanical or 
electronic combination lock utilized by the safe shall have at least 
10,000 possible combinations consisting of a minimum three numbers, 
letters, or symbols. The lock shall be protected by a casehardened 
(Rc 60+) drill-resistant steel plate, or drill-resistant material of 
equivalent strength.
    (3) Boltwork shall consist of a minimum of three steel locking 
bolts of at least \1/2\ inch thickness that intrude from the door of 
the safe into the body of the safe or from the body of the safe into 
the door of the safe, which are operated by a separate handle and 
secured by the lock.
    (4) The exterior walls shall be constructed of a minimum 12-
gauge thick steel for a single-walled safe, or the sum of the steel 
walls shall add up to at least 0.100 inches for safes with walls 
made from two pieces of flat-rolled steel.
    (5) Doors shall be constructed of a minimum one layer of 7-gauge 
steel plate reinforced construction or at least two layers of a 
minimum 12-gauge steel compound construction.
    (6) Door hinges shall be protected to prevent the removal of the 
door. Protective features include, but are not limited to: Hinges 
not exposed to the outside, interlocking door designs, dead bars, 
jeweler's lugs and active or inactive locking bolts.
    The scope also excludes metal storage devices that (1) have two 
or more exterior exposed drawers regardless of the height of the 
unit, or (2) are no more than 30 inches tall and have at least one 
exterior exposed drawer.
    Also excluded from the scope are free standing metal cabinets 
less than 30 inches tall with a single opening, single door and an 
installed tabletop.
    The scope also excludes metal storage devices less than 27 
inches wide and deep that: (1) Have two doors hinged on the right 
and left side of the door frame respectively covering a single 
opening and that open from the middle toward the outer frame; or (2) 
are free standing or wall-mounted, single-opening units 20 inches or 
less high with a single door.
    The subject certain metal lockers are classified under 
Harmonized Tariff Schedule of the United States (HTSUS) subheading 
9403.20.0078. Parts of subject certain metal lockers are classified 
under HTS subheading 9403.90.8041. In addition, subject certain 
metal lockers may also enter under HTS subheading 9403.20.0050. 
While HTSUS subheadings are provided for convenience and Customs 
purposes, the written

[[Page 46830]]

description of the scope of the orders is dispositive.

[FR Doc. 2021-17865 Filed 8-19-21; 8:45 am]
BILLING CODE 3510-DS-P