[Federal Register Volume 86, Number 139 (Friday, July 23, 2021)]
[Rules and Regulations]
[Page 38905]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-15658]
========================================================================
Rules and Regulations
Federal Register
________________________________________________________________________
This section of the FEDERAL REGISTER contains regulatory documents
having general applicability and legal effect, most of which are keyed
to and codified in the Code of Federal Regulations, which is published
under 50 titles pursuant to 44 U.S.C. 1510.
The Code of Federal Regulations is sold by the Superintendent of Documents.
========================================================================
Federal Register / Vol. 86, No. 139 / Friday, July 23, 2021 / Rules
and Regulations
[[Page 38905]]
NUCLEAR REGULATORY COMMISSION
10 CFR Part 50
[NRC-2020-0253]
Advanced Manufacturing Technologies Subtask 2A
AGENCY: Nuclear Regulatory Commission.
ACTION: Final report; issuance.
-----------------------------------------------------------------------
SUMMARY: The U.S. Nuclear Regulatory Commission (NRC) is issuing the
final document entitled, ``Implementation of Quality Assurance Criteria
and 10 CFR 50.59 for Nuclear Power Plant Components Produced Using
Advanced Manufacturing Technologies.''
DATES: This final report is available on July 23, 2021.
ADDRESSES: Please refer to Docket ID NRC-2020-0253 when contacting the
NRC about the availability of information regarding this document. You
may obtain publicly available information related to this document
using any of the following methods:
Federal Rulemaking Website: Go to https://www.regulations.gov and search for Docket ID NRC-2020-0253. Address
questions about Docket IDs in Regulations.gov to Stacy Schumann;
telephone: 301-415-0624; email: [email protected]. For technical
questions, contact the individual listed in the FOR FURTHER INFORMATION
CONTACT section of this document.
NRC's Agencywide Documents Access and Management System
(ADAMS): You may obtain publicly available documents online in the
ADAMS Public Documents collection at https://www.nrc.gov/reading-rm/adams.html. To begin the search, select ``Begin Web-based ADAMS
Search.'' For problems with ADAMS, please contact the NRC's Public
Document Room (PDR) reference staff at 1-800-397-4209, 301-415-4737, or
by email to [email protected]. The final document, ``Implementation
of Quality Assurance Criteria and 10 CFR 50.59 for Nuclear Power Plant
Components Produced Using Advanced Manufacturing Technologies,'' is
available in ADAMS under Accession No. ML21155A043.
Attention: The PDR, where you may examine and order copies
of public documents, is currently closed. You may submit your request
to the PDR via email at [email protected] or call 1-800-397-4209 or
301-415-4737, between 8:00 a.m. and 4:00 p.m. (ET), Monday through
Friday, except Federal holidays.
FOR FURTHER INFORMATION CONTACT: Isaac Anchondo-Lopez, Office of
Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission,
Washington, DC 20555-0001; telephone: 817-200-1152; email:
[email protected].
SUPPLEMENTARY INFORMATION:
I. Background
The NRC considers Advanced Manufacturing Technologies (AMTs) to
consist of material processing and component fabrication methods that
have not been traditionally used in the U.S. nuclear industry and have
not yet received NRC approval through NRC-endorsed codes and standards
or the approval of an industry submittal. There are several regulatory
paths available to a licensee for utilizing an AMT in a nuclear
application, including: (1) Development of a code or standard that can
be incorporated by reference in Sec. 50.55a of chapter I of title 10
of the Code of Federal Regulations (10 CFR); (2) selection of an
unregulated in service application; (3) submission of generic technical
reports or plant-specific submittals for NRC approval; or (4)
implementation of the 10 CFR 50.59, ``Changes, tests and experiments,''
10 CFR 70.72, ``Facility changes and change process,'' or 10 CFR 72.48,
``Changes, tests, and experiments'' processes. The document addresses
the processes, consistent with the QA requirements in appendix B to 10
CFR part 50 and in accordance with 10 CFR 50.59, in order to support
the staff's performance of potential inspections of a licensee's
implementation of these requirements for AMT-fabricated components.
II. Congressional Review Act
This action is a rule as defined in the Congressional Review Act (5
U.S.C. 801-808). However, the Office of Management and Budget has not
found it to be a major rule as defined in the Congressional Review Act.
III. Implementation
The staff has added Appendix A, ``Disposition of Public Comments,''
to the final document to inform the reader how public comments were
dispositioned. The Division of New and Renewed Licenses of the Office
of Nuclear Reactor Regulation will transmit the final version of the
document (ADAMS Accession Number ML21155A043) to each of the NRC
Regional Offices via a memo to be issued concurrently with publication
of this Federal Register notification.
Dated: July 19, 2021.
For the Nuclear Regulatory Commission.
Anna H. Bradford,
Director, Division of New and Renewed Licenses, Office of Nuclear
Reactor Regulation.
[FR Doc. 2021-15658 Filed 7-22-21; 8:45 am]
BILLING CODE 7590-01-P