[Federal Register Volume 86, Number 79 (Tuesday, April 27, 2021)]
[Notices]
[Pages 22139-22143]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-08713]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-525-001, A-351-854, A-891-001, A-729-803, A-428-849, A-533-895, A-
560-835, A-475-842, A-523-814, A-485-809, A-801-001, A-856-001, A-791-
825, A-469-820, A-583-867, A-489-839]


Common Alloy Aluminum Sheet From Bahrain, Brazil, Croatia, Egypt, 
Germany, India, Indonesia, Italy, Oman, Romania, Serbia, Slovenia, 
South Africa, Spain, Taiwan and the Republic of Turkey: Antidumping 
Duty Orders

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: Based on affirmative final determinations by the Department of 
Commerce (Commerce) and the International Trade Commission (ITC), 
Commerce is issuing antidumping duty orders on Common Alloy Aluminum 
Sheet (aluminum sheet) from Bahrain, Brazil, Croatia, Egypt, Germany, 
India, Indonesia, Italy, Oman, Romania, Serbia, Slovenia, South Africa, 
Spain, Taiwan, and the Republic of Turkey (Turkey).

DATES: Applicable April 27, 2021.

FOR FURTHER INFORMATION CONTACT: Allison Hollander at (202) 482-2805 
(Bahrain); Shanah Lee at (202) 482-6386 (Brazil); Irene Gorelik at 
(202) 482-6905 (Croatia); Magd Zalok at (202) 482-4162 (Egypt); 
Jonathan Hill at (202) 482-3518 (Germany); Jasun Moy at (202) 482-8194 
(India); Preston Cox at (202) 482-5041 (Indonesia); Elfi Blum at (202) 
482-0197 (Italy); Chelsey Simonovich at (202) 482-1979 (Oman); Krisha 
Hill at (202) 482-4037 (Romania); Katherine Johnson at (202) 482-4929 
(Serbia); Faris

[[Page 22140]]

Montgomery at (202) 482-2805 (Slovenia); Laurel LaCivita at (202) 482-
4243 (South Africa); Whitley Herndon at (202) 482-6247 (Spain); Kathryn 
Turlo at (202) 482-3870 (Taiwan); and Sean Carey at (202) 482-3964 
(Turkey); AD/CVD Operations, Enforcement and Compliance, International 
Trade Administration, U.S. Department of Commerce, 1401 Constitution 
Avenue NW, Washington, DC 20230.

SUPPLEMENTARY INFORMATION:

Background

    On March 8, 2021, Commerce published its affirmative final 
determinations in the less-than-fair-value (LTFV) investigations of 
aluminum sheet from Bahrain, Brazil, Croatia, Egypt, Germany, India, 
Indonesia, Italy, Oman, Romania, Serbia, Slovenia, South Africa, Spain, 
Taiwan, and Turkey.\1\ On April 20, 2021, the ITC notified Commerce of 
its final determinations, pursuant to section 735(d) of the Tariff Act 
of 1930, as amended (the Act), that an industry in the United States is 
materially injured within the meaning of section 735(b)(1)(A)(i) of the 
Act by reason of LTFV imports of aluminum sheet from Bahrain, Brazil, 
Croatia, Egypt, Germany, India, Indonesia, Italy, Oman, Romania, 
Serbia, Slovenia, South Africa, Spain, Taiwan, and Turkey, and its 
negative critical circumstances finding with respect to dumped imports 
of aluminum sheet from Indonesia.\2\
---------------------------------------------------------------------------

    \1\ See Common Alloy Aluminum Sheet From Bahrain: Final 
Affirmative Determination of Sales at Less Than Fair Value, 86 FR 
13331 (March 8, 2021); Common Alloy Aluminum Sheet From Brazil: 
Final Affirmative Determination of Sales at Less Than Fair Value, 86 
FR 13302 (March 8, 2021); Common Alloy Aluminum Sheet From Croatia: 
Final Affirmative Determination of Sales at Less Than Fair Value, 86 
FR 13312 (March 8, 2021); Common Alloy Aluminum Sheet From Egypt: 
Final Affirmative Determination of Sales at Less Than Fair Value, 86 
FR 13324 (March 8, 2021); Common Alloy Aluminum Sheet From Germany: 
Final Affirmative Determination of Sales at Less Than Fair Value, 86 
FR 13318 (March 8, 2021); Common Alloy Aluminum Sheet From India: 
Final Affirmative Determination of Sales at Less Than Fair Value, 86 
FR 13282 (March 8, 2021); Common Alloy Aluminum Sheet From 
Indonesia: Final Affirmative Determination of Sales at Less Than 
Fair Value, and Final Affirmative Finding of Critical Circumstances, 
86 FR 13304 (March 8, 2021); Common Alloy Aluminum Sheet From Italy: 
Final Affirmative Determination of Sales at Less Than Fair Value, 86 
FR 13311 (March 8, 2021); Common Alloy Aluminum Sheet From Romania: 
Final Affirmative Determination of Sales at Less Than Fair Value, 86 
FR 13320 (March 8, 2021); Common Alloy Aluminum Sheet From Serbia: 
Final Affirmative Determination of Sales at Less Than Fair Value, 86 
FR 13295 (March 8, 2021) ; Common Alloy Aluminum Sheet From 
Slovenia: Final Affirmative Determination of Sales at Less Than Fair 
Value, 86 FR 13305 (March 8, 2021); Common Alloy Aluminum Sheet From 
South Africa: Final Affirmative Determination of Sales at Less Than 
Fair Value, 86 FR 13287 (March 8, 2021); Common Alloy Aluminum Sheet 
From Spain: Final Affirmative Determination of Sales at Less Than 
Fair Value, 86 FR 13298 (March 8, 2021); Common Alloy Aluminum Sheet 
From Taiwan: Final Affirmative Determination of Sales at Less Than 
Fair Value, 86 FR 13293 (March 8, 2021); Common Alloy Aluminum Sheet 
From Oman: Final Affirmative Determination of Sales at Less Than 
Fair Value, 86 FR 13328 (March 8, 2021); Common Alloy Aluminum Sheet 
From Turkey: Final Affirmative Determination of Sales at Less Than 
Fair Value, 86 FR 13326 (March 8, 2021) (collectively Final 
Determinations). The final affirmative determination for Turkey was 
inadvertently published under the case number for Italy (A-475-842). 
The correct case number for Turkey is A-489-839.
    \2\ See ITC Notification Letter, Investigation Nos. 701-TA-639 
and 641-642 and 731-TA-1475-1479, 1481-1483, and 1485-1492 (Final) 
dated April 20, 2021 (ITC Notification Letter).
---------------------------------------------------------------------------

Scope of the Orders

    The products covered by these orders are aluminum sheet from 
Bahrain, Brazil, Croatia, Egypt, Germany, India, Indonesia, Italy, 
Oman, Romania, Serbia, Slovenia, South Africa, Spain, Taiwan, and 
Turkey. For a complete description of the scope of these orders, see 
the appendix to this notice.

Antidumping Duty Orders

    On April 20, 2021, in accordance with section 735(d) of the Act, 
the ITC notified Commerce of its final determinations in these 
investigations, in which it found that an industry in the United States 
is materially injured by reason of imports of aluminum sheet from 
Bahrain, Brazil, Croatia, Egypt, Germany, India, Indonesia, Italy, 
Oman, Romania, Serbia, Slovenia, South Africa, Spain, Taiwan, and 
Turkey.\3\ Therefore, in accordance with section 735(c)(2) of the Act, 
Commerce is issuing these antidumping duty orders. Because the ITC 
determined that imports of aluminum sheet from Bahrain, Brazil, 
Croatia, Egypt, Germany, India, Indonesia, Italy, Oman, Romania, 
Serbia, Slovenia, South Africa, Spain, Taiwan, and Turkey are 
materially injuring a U.S. industry, unliquidated entries of such 
merchandise from Bahrain, Brazil, Croatia, Egypt, Germany, India, 
Indonesia, Italy, Oman, Romania, Serbia, Slovenia, South Africa, Spain, 
Taiwan, and Turkey, entered or withdrawn from warehouse for 
consumption, are subject to the assessment of antidumping duties.
---------------------------------------------------------------------------

    \3\ See ITC Notification Letter.
---------------------------------------------------------------------------

    Therefore, in accordance with section 736(a)(1) of the Act, 
Commerce will direct U.S. Customs and Border Protection (CBP) to 
assess, upon further instruction by Commerce, antidumping duties equal 
to the amount by which the normal value of the merchandise exceeds the 
export price (or constructed export price) of the merchandise, for all 
relevant entries of aluminum sheet from Bahrain, Brazil, Croatia, 
Egypt, Germany, India, Indonesia, Italy, Oman, Romania, Serbia, 
Slovenia, South Africa, Spain, Taiwan, and Turkey. With the exception 
of entries occurring after the expiration of the provisional measures 
period and before publication of the ITC's final affirmative injury 
determinations, as further described below, antidumping duties will be 
assessed on unliquidated entries of aluminum sheet from Bahrain, 
Brazil, Croatia, Egypt, Germany, India, Indonesia, Italy, Oman, 
Romania, Serbia, Slovenia, South Africa, Spain, Taiwan, and Turkey 
entered, or withdrawn from warehouse, for consumption, on or after 
October 15, 2020, the date of publication of the Preliminary 
Determinations.\4\
---------------------------------------------------------------------------

    \4\ See Common Alloy Aluminum Sheet From Bahrain: Preliminary 
Affirmative Determination of Sales at Less Than Fair Value, 
Postponement of Final Determination, and Extension of Provisional 
Measures, 85 FR 65372 (October 15, 2020); Common Alloy Aluminum 
Sheet From Brazil: Preliminary Affirmative Determination of Sales at 
Less Than Fair Value, Postponement of Final Determination, and 
Extension of Provisional Measures 85 FR 65363 (October 15, 2020); 
Common Alloy Aluminum Sheet From Croatia: Preliminary Affirmative 
Determination of Sales at Less Than Fair Value, Postponement of 
Final Determination, and Extension of Provisional Measures, 85 FR 
65384 (October 15, 2020) ; Common Alloy Aluminum Sheet From Egypt: 
Preliminary Affirmative Determination of Sales at Less Than Fair 
Value, Postponement of Final Determination, and Extension of 
Provisional Measures, 85 FR 65382 (October 15, 2020); Common Alloy 
Aluminum Sheet From Germany: Preliminary Affirmative Determination 
of Sales at Less Than Fair Value, Postponement of Final 
Determination, and Extension of Provisional Measures, 85 FR 65386 
(October 15, 2020); Common Alloy Aluminum Sheet From India: 
Preliminary Affirmative Determination of Sales at Less Than Fair 
Value, Postponement of Final Determination, and Extension of 
Provisional Measures, 85 FR 65377 (October 15, 2020); Common Alloy 
Aluminum Sheet From Indonesia: Preliminary Affirmative Determination 
of Sales at Less Than Fair Value, Preliminary Affirmative 
Determination of Critical Circumstances, 85 FR 65356 (October 15, 
2020) (Indonesia Preliminary Determination); Common Alloy Aluminum 
Sheet From Italy: Preliminary Affirmative Determination of Sales at 
Less Than Fair Value, Postponement of Final Determination, and 
Extension of Provisional Measures, 85 FR 65342 (October 15, 2020); 
Common Alloy Aluminum Sheet From the Sultanate of Oman: Preliminary 
Affirmative Determination of Sales at Less Than Fair Value, Negative 
Determination of Critical Circumstances, and Postponement of Final 
Determination, 85 FR 65340 (October 15, 2020); Common Alloy Aluminum 
Sheet From Romania: Preliminary Affirmative Determination of Sales 
at Less Than Fair Value, 85 FR 65358 (October 15, 2020); Common 
Alloy Aluminum Sheet From Serbia: Preliminary Affirmative 
Determination of Sales at Less Than Fair Value, Postponement of 
Final Determination, and Extension of Provisional Measures, 85 FR 
65370 (October 15, 2020); Common Alloy Aluminum Sheet From Slovenia: 
Preliminary Affirmative Determination of Sales at Less Than Fair 
Value, Postponement of Final Determination, and Extension of 
Provisional Measures, 85 FR 65349 (October 15, 2020); Common Alloy 
Aluminum Sheet From South Africa: Preliminary Affirmative 
Determination of Sales at Less Than Fair Value, Postponement of 
Final Determination, and Extension of Provisional Measures, 85 FR 
65351 (October 15, 2020); Common Alloy Aluminum Sheet From Spain: 
Preliminary Affirmative Determination of Sales at Less Than Fair 
Value, Postponement of Final Determination, and Extension of 
Provisional Measures, 85 FR 65367 (October 15, 2020); Common Alloy 
Aluminum Sheet From Taiwan: Preliminary Affirmative Determination of 
Sales at Less Than Fair Value, Preliminary Negative Determination of 
Critical Circumstances, Postponement of Final Determination, and 
Extension of Provisional Measures, 85 FR 65361 (October 15, 2020); 
Common Alloy Aluminum Sheet From Turkey: Preliminary Affirmative 
Determination of Sales at Less Than Fair Value, Preliminary Negative 
Determination of Critical Circumstances, Postponement of Final 
Determination, and Extension of Provisional Measures, 85 FR 65346 
(October 15, 2020) (collectively, Preliminary Determinations).

---------------------------------------------------------------------------

[[Page 22141]]

Continuation of Suspension of Liquidation

    Except as noted in the ``Provisional Measures'' section of this 
notice, in accordance with section 735(c)(1)(B) of the Act, Commerce 
will instruct CBP to continue to suspend liquidation on all relevant 
entries of aluminum sheet from Bahrain, Brazil, Croatia, Egypt, 
Germany, India, Indonesia, Italy, Oman, Romania, Serbia, Slovenia, 
South Africa, Spain, Taiwan and Turkey. These instructions suspending 
liquidation will remain in effect until further notice.
    Commerce will also instruct CBP to require cash deposits equal to 
the estimated weighted-average dumping margins indicated in the tables 
below. Accordingly, effective on the date of publication in the Federal 
Register of the notice of the ITC's final affirmative injury 
determinations, CBP will require, at the same time as importers would 
normally deposit estimated duties on subject merchandise, a cash 
deposit equal to the rates listed below. The relevant all-others rate 
applies to all producers or exporters not specifically listed.
    Because the estimated weighted-average dumping margin is zero for 
subject merchandise produced and exported by Manaksia Aluminium Company 
Limited, entries of shipments of subject merchandise from this 
producer/exporter combination are excluded from the antidumping duty 
order on subject merchandise from India. Because the estimated 
weighted-average dumping margin is zero for subject merchandise 
produced and exported by Laminazione Sottile S.p.A., entries of 
shipments of subject merchandise from this producer/exporter 
combination are excluded from the antidumping duty order on subject 
merchandise from Italy. These exclusions will not be applicable to 
merchandise exported to the United States by these respondents in any 
other producer/exporter combination or by third parties that sourced 
subject merchandise from the excluded producer/exporter combinations.

Critical Circumstances

    With regard to the ITC's negative critical circumstances 
determination on imports of aluminum sheet from Indonesia, we will 
instruct CBP to lift suspension and to refund any cash deposits made to 
secure the payment of estimated antidumping duties with respect to 
entries of the subject merchandise entered, or withdrawn from 
warehouse, for consumption on or after July 17, 2020 (i.e., 90 days 
prior to the date of the publication of the Indonesia Preliminary 
Determination), but before October 15, 2020 (i.e., the date of 
publication of the Indonesia Preliminary Determination).

Provisional Measures

    Section 733(d) of the Act states that suspension of liquidation 
pursuant to an affirmative preliminary determination may not remain in 
effect for more than four months, except where exporters representing a 
significant proportion of exports of the subject merchandise request 
that Commerce extend the four-month period to no more than six months. 
At the request of exporters that account for a significant proportion 
of aluminum sheet from Bahrain, Brazil, Croatia, Egypt, Germany, India, 
Indonesia, Italy, Oman, Romania, Serbia, Slovenia, South Africa, Spain, 
Taiwan, and Turkey, Commerce extended the four-month period to six 
months in each of these investigations. Commerce published the 
preliminary determinations in these investigations on October 15, 
2020.\5\
---------------------------------------------------------------------------

    \5\ See Preliminary Determinations, and Common Alloy Aluminum 
Sheet from Indonesia and Romania: Postponement of Final 
Determinations of Less-Than-Fair-Value Investigations, 85 FR 1049 
(November 6, 2020).
---------------------------------------------------------------------------

    The extended provisional measures period, beginning on the date of 
publication of the Preliminary Determinations, ends on April 12, 2021. 
Therefore, in accordance with section 733(d) of the Act and our 
practice,\6\ Commerce will instruct CBP to terminate the suspension of 
liquidation and to liquidate, without regard to antidumping duties, 
unliquidated entries of aluminum sheet from Bahrain, Brazil, Croatia, 
Egypt, Germany, India, Indonesia, Italy, Oman, Romania, Serbia, 
Slovenia, South Africa, Spain, Taiwan, and Turkey entered, or withdrawn 
from warehouse, for consumption after April 12, 2021, the final day on 
which the provisional measures were in effect, until and through the 
day preceding the date of publication of the ITC's final affirmative 
injury determinations in the Federal Register. Suspension of 
liquidation and the collection of cash deposits will resume on the date 
of publication of the ITC's final determinations in the Federal 
Register.
---------------------------------------------------------------------------

    \6\ See, e.g., Certain Corrosion-Resistant Steel Products from 
India, India, the People's Republic of China, the Republic of Korea 
and Taiwan: Amended Final Affirmative Antidumping Determination for 
India and Taiwan, and Antidumping Duty Orders, 81 FR 48390, 48392 
(July 25, 2016).
---------------------------------------------------------------------------

Estimated Weighted-Average Dumping Margins

    The estimated weighted-average dumping margins are as follows:

                                 Bahrain
------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Gulf Aluminium Rolling Mill B.S.C. (GARMCO).................        4.83
All Others..................................................        4.83
------------------------------------------------------------------------


                                 Brazil
------------------------------------------------------------------------
                                                               Weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Companhia Brasileiro de Aluminio............................      137.06
Novelis do Brasil Ltda......................................       49.61
All Others..................................................       49.61
------------------------------------------------------------------------


                                 Croatia
------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Impol d.o.o./Impol-TLM d.o.o.\7\............................        3.19
All Others..................................................        3.19
------------------------------------------------------------------------


[[Page 22142]]


                                  Egypt
------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Aluminium Co. of Egypt (Egyptalum)/Egyptian Copper Works           12.11
 Company....................................................
All Others..................................................       12.11
------------------------------------------------------------------------


                                 Germany
------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Hydro Aluminium Rolled Products GmbH........................      242.80
Novelis Deutschland GmbH....................................       49.40
All Others..................................................       49.40
------------------------------------------------------------------------


                                  India
------------------------------------------------------------------------
                                                                 Cash
                                                   Estimated    deposit
                                                   weighted-     rate
                                                    average    (adjusted
                Exporter/producer                   dumping       for
                                                    margin      subsidy
                                                   (percent)   offsets)
                                                               (percent)
------------------------------------------------------------------------
Hindalco Industries Limited.....................       47.92       44.64
Manaksia Aluminium Company Limited..............        0.00        0.00
All Others......................................       47.92       44.64
------------------------------------------------------------------------


                                Indonesia
------------------------------------------------------------------------
                                                               Estimated
                                                                dumping
                      Exporter/producer                         margin
                                                               (percent)
------------------------------------------------------------------------
Pt. Alumindo Light Metal Industry Tbk.......................       32.12
All Others..................................................       32.12
------------------------------------------------------------------------


                                  Italy
------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Laminazione Sottile S.p.A...................................        0.00
Profilglass S.p.A...........................................       29.13
All Others..................................................       14.57
------------------------------------------------------------------------


                                  Oman
------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Oman Aluminium Rolling Company..............................        5.29
All Others..................................................        5.29
------------------------------------------------------------------------


                                 Romania
------------------------------------------------------------------------
                                                               Estimated
                                                                dumping
                      Exporter/producer                         margin
                                                               (percent)
------------------------------------------------------------------------
Alro, SA \8\................................................       37.26
All Others..................................................       12.51
------------------------------------------------------------------------


                                 Serbia
------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Impol d.o.o./Impol Seval, a.d.\9\...........................       11.67
Otovici Doo.................................................       25.84
All Others..................................................       11.67
------------------------------------------------------------------------


                                Slovenia
------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Impol d.o.o./Impol FT, d.o.o.\10\...........................       13.43
All Others..................................................       13.43
------------------------------------------------------------------------


                              South Africa
------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Hulamin Operations (Pty) Ltd................................        8.85
All Others..................................................        8.85
------------------------------------------------------------------------


                                  Spain
------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Aludium Transformacion de Productos, S.L....................        3.80
Compania Valenciana de Aluminio Baux S.L.U./Bancolor Baux          24.23
 S.L.U......................................................
All Others..................................................        3.80
------------------------------------------------------------------------


                                 Taiwan
------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
C.S. Aluminium Corporation..................................       17.50
All Others..................................................       17.50
------------------------------------------------------------------------


                                 Turkey
------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Assan Aluminyum Sanayi ve Ticaret A.S.......................        2.02
Teknik Aluminyum Sanayi A.S.................................       13.56
All Others..................................................        4.85
------------------------------------------------------------------------

Notification to Interested Parties
---------------------------------------------------------------------------

    \7\ The final rate calculated for Impol applies to subject 
merchandise produced by Impol-TLM d.o.o. and exported by either 
Impol-TLM d.o.o. (Croatia) or Impol d.o.o. (Slovenia).
    \8\ On April 8, 2020, Alro, SA and its affiliate Vimetco 
Management Romania, SRL, notified Commerce that ``Vimetco Group'' is 
not a legal entity but that the name reflects a collection of 
companies including Alro, SA. Additionally, Alro, SA noted that its 
name is ``Alro, SA'' rather than ``Alro, S.A.'' as stated in the 
Initiation Notice. See Alro, SA's Letter, ``Common Alloy Aluminum 
Sheets from Romania, A-385-809; Clarification of Company Names,'' 
dated April 8, 2020. Given that Vimetco Group is not a legal entity 
but refers to a group of companies in which Alro, SA is the only 
producer, seller, and exporter of aluminum sheet, we have assigned 
the dumping rate to Alro, SA.
    \9\ The final rate calculated for Impol applies to subject 
merchandise produced by Impol Seval and exported by either Impol 
Seval (Serbia) or Impol d.o.o. (Slovenia).
    \10\ The final rate calculated for Impol applies to subject 
merchandise produced by Impol FT, d.o.o. and exported by either 
Impol FT, d.o.o. or Impol d.o.o.
---------------------------------------------------------------------------

    This notice constitutes the antidumping duty orders with respect to 
aluminum sheet from Bahrain, Brazil, Croatia, Egypt, Germany, India, 
Indonesia, Italy, Oman, Romania, Serbia, Slovenia, South Africa, Spain, 
Taiwan, and Turkey pursuant to section 736(a) of the Act. Interested 
parties can find a list of antidumping duty orders currently in effect 
at http://

[[Page 22143]]

enforcement.trade.gov/stats/iastats1.html.
    These antidumping duty orders are published in accordance with 
sections 735(e) and 736(a) of the Act and 19 CFR 351.224(e) and 19 CFR 
351.211(b).

    Dated: April 21, 2021.
Christian Marsh,
Acting Assistant Secretary for Enforcement and Compliance.

Appendix

Scope of the Orders

    The products covered by these orders are common alloy aluminum 
sheet, which is a flat-rolled aluminum product having a thickness of 
6.3 mm or less, but greater than 0.2 mm, in coils or cut-to-length, 
regardless of width. Common alloy sheet within the scope of these 
orders includes both not clad aluminum sheet, as well as multi-
alloy, clad aluminum sheet. With respect to not clad aluminum sheet, 
common alloy sheet is manufactured from a 1XXX-, 3XXX-, or 5XXX-
series alloy as designated by the Aluminum Association. With respect 
to multi-alloy, clad aluminum sheet, common alloy sheet is produced 
from a 3XXX-series core, to which cladding layers are applied to 
either one or both sides of the core. The use of a proprietary alloy 
or non-proprietary alloy that is not specifically registered by the 
Aluminum Association as a discrete 1XXX-, 3XXX-, or 5XXX-series 
alloy, but that otherwise has a chemistry that is consistent with 
these designations, does not remove an otherwise in-scope product 
from the scope.
    Common alloy sheet may be made to ASTM specification B209-14 but 
can also be made to other specifications. Regardless of 
specification, however, all common alloy sheet meeting the scope 
description is included in the scope. Subject merchandise includes 
common alloy sheet that has been further processed in a third 
country, including but not limited to annealing, tempering, 
painting, varnishing, trimming, cutting, punching, and/or slitting, 
or any other processing that would not otherwise remove the 
merchandise from the scope of these orders if performed in the 
country of manufacture of the common alloy sheet.
    Excluded from the scope of these orders is aluminum can stock, 
which is suitable for use in the manufacture of aluminum beverage 
cans, lids of such cans, or tabs used to open such cans. Aluminum 
can stock is produced to gauges that range from 0.200 mm to 0.292 
mm, and has an H-19, H-41, H-48, H-39, or H-391 temper. In addition, 
aluminum can stock has a lubricant applied to the flat surfaces of 
the can stock to facilitate its movement through machines used in 
the manufacture of beverage cans. Aluminum can stock is properly 
classified under Harmonized Tariff Schedule of the United States 
(HTSUS) subheadings 7606.12.3045 and 7606.12.3055.
    Where the nominal and actual measurements vary, a product is 
within the scope if application of either the nominal or actual 
measurement would place it within the scope based on the definitions 
set for the above.
    Common alloy sheet is currently classifiable under HTSUS 
subheadings 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000, 
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095. Further, 
merchandise that falls within the scope of these orders may also be 
entered into the United States under HTSUS subheadings 7606.11.3030, 
7606.12.3015, 7606.12.3025, 7606.12.3035, 7606.12.3091, 
7606.91.3055, 7606.91.6055, 7606.92.3025, 7606.92.6055, 
7607.11.9090. Although the HTSUS subheadings are provided for 
convenience and customs purposes, the written description of the 
scope of these orders is dispositive.

[FR Doc. 2021-08713 Filed 4-26-21; 8:45 am]
BILLING CODE 3510-DS-P