[Federal Register Volume 86, Number 57 (Friday, March 26, 2021)]
[Notices]
[Pages 16185-16186]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-06296]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-570-026]


Corrosion-Resistant Steel Products From the People's Republic of 
China: Final Determination of No Shipments in the Antidumping Duty 
Administrative Review; 2018-2019

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: The Department of Commerce (Commerce) continues to find that 
Nippon Steel and Sumikin Sales Vietnam Co., Ltd. (NSSVC), Hoa Sen Group 
(HSG), and Ton Dong A Corporation (TDA) made no shipments of corrosion-
resistant steel products (CORE) from the People's Republic of China 
(subject merchandise) during the period of review (POR) July 1, 2018, 
through June 30, 2019.

DATES: Applicable March 26, 2021.

FOR FURTHER INFORMATION CONTACT: Gene H. Calvert, AD/CVD Operations, 
Office VII, Enforcement and Compliance, International Trade 
Administration, U.S. Department of Commerce, 1401 Constitution Avenue 
NW, Washington, DC 20230; telephone: (202) 482-3586.

SUPPLEMENTARY INFORMATION:

Background

    On November 25, 2020, Commerce published the Preliminary Results of 
this administrative review in the Federal Register.\1\ Commerce invited 
parties to submit comments on the Preliminary Results. No interested 
party submitted comments concerning the Preliminary Results or 
requested a hearing in this administrative review. Accordingly, the 
final results of this administrative review remain unchanged from the 
Preliminary Results. The current deadline for these final results is 
March 25, 2021. Commerce conducted this review in accordance with 
section 751(a)(1)(B) of the Tariff Act of 1930, as amended (the Act).
---------------------------------------------------------------------------

    \1\ See Corrosion-Resistant Steel Products from the People's 
Republic of China: Preliminary Determination of No Shipments in the 
Antidumping Duty Administrative Review and Rescission, in Part; 
2018-2019, 85 FR 75299 (November 25, 2020) (Preliminary Results).
---------------------------------------------------------------------------

Scope of the Order

    The products covered by this order are certain flat-rolled steel 
products, either clad, plated, or coated with corrosion-resistant 
metals such as zinc, aluminum, or zinc-, aluminum-, nickel--or iron-
based alloys, whether or not corrugated or painted, varnished, 
laminated, or coated with plastics or other non-metallic substances in 
addition to the metallic coating. The products covered include coils 
that have a width of 12.7 mm or greater, regardless of form of coil 
(e.g., in successively superimposed layers, spirally oscillating, 
etc.). The products covered also include products not in coils (e.g., 
in straight lengths) of a thickness less than 4.75 mm and a width that 
is 12.7 mm or greater and that measures at least 10 times the 
thickness. The products covered also include products not in coils 
(e.g., in straight lengths) of a thickness of 4.75 mm or more and a 
width exceeding 150 mm and measuring at least twice the thickness. The 
products described above may be rectangular, square, circular, or other 
shape and include products of either rectangular or non-rectangular 
cross-section where such cross-section is achieved subsequent to the 
rolling process, i.e., products which have been ``worked after 
rolling'' (e.g., products which have been beveled or rounded at the 
edges). For purposes of the width and thickness requirements referenced 
above:
    (1) Where the nominal and actual measurements vary, a product is 
within the scope if application of either the nominal or actual 
measurement would place it within the scope based on the definitions 
set forth above, and
    (2) where the width and thickness vary for a specific product 
(e.g., the thickness of certain products with non-rectangular cross-
section, the width of certain products with non-rectangular shape, 
etc.), the measurement at its greatest width or thickness applies.
    Steel products included in the scope of this order are products in 
which: (1) Iron predominates, by weight, over each of the other 
contained elements; (2) the carbon content is 2 percent or less, by 
weight; and (3) none of the elements listed below exceeds the quantity, 
by weight, respectively indicated:

 2.50 percent of manganese, or
 3.30 percent of silicon, or
 1.50 percent of copper, or
 1.50 percent of aluminum, or
 1.25 percent of chromium, or
 0.30 percent of cobalt, or
 0.40 percent of lead, or
 2.00 percent of nickel, or
 0.30 percent of tungsten (also called wolfram), or
 0.80 percent of molybdenum, or
 0.10 percent of niobium (also called columbium), or
 0.30 percent of vanadium, or
 0.30 percent of zirconium

Unless specifically excluded, products are included in this scope 
regardless of levels of boron and titanium.
    For example, specifically included in this scope are vacuum 
degassed, fully stabilized (commonly referred to as interstitial-free 
(IF)) steels and high strength low alloy (HSLA) steels. IF steels are 
recognized as low carbon steels with micro-alloying levels of elements 
such as titanium and/or niobium added to stabilize carbon and nitrogen 
elements. HSLA steels are recognized as steels with micro-alloying 
levels of elements such as chromium, copper, niobium, titanium, 
vanadium, and molybdenum.
    Furthermore, this scope also includes Advanced High Strength Steels 
(AHSS) and Ultra High Strength Steels (UHSS), both of which are 
considered high tensile strength and high elongation steels.
    Subject merchandise also includes corrosion-resistant steel that 
has been further processed in a third country, including but not 
limited to annealing, tempering, painting, varnishing, trimming, 
cutting, punching and/or slitting or any other processing that would 
not otherwise remove the merchandise from the scope of the order if 
performed in the country of manufacture of the in-scope corrosion 
resistant steel.
    All products that meet the written physical description, and in 
which the chemistry quantities do not exceed any one of the noted 
element levels listed above, are within the scope of this order unless 
specifically excluded. The following products are outside of and/or 
specifically excluded from the scope of this order:
     Flat-rolled steel products either plated or coated with 
tin, lead, chromium, chromium oxides, both tin and lead (``terne 
plate''), or both chromium and chromium oxides (``tin free steel''), 
whether or not painted, varnished or coated with plastics or other non-
metallic substances in addition to the metallic coating;

[[Page 16186]]

     Clad products in straight lengths of 4.7625 mm or more in 
composite thickness and of a width which exceeds 150 mm and measures at 
least twice the thickness; and
     Certain clad stainless flat-rolled products, which are 
three-layered corrosion-resistant flat-rolled steel products less than 
4.75 mm in composite thickness that consist of a flat-rolled steel 
product clad on both sides with stainless steel in a 20%-60%-20% ratio.
    The products subject to the order are currently classified in the 
Harmonized Tariff Schedule of the United States (HTSUS) under item 
numbers: 7210.30.0030, 7210.30.0060, 7210.41.0000, 7210.49.0030, 
7210.49.0091, 7210.49.0095, 7210.61.0000, 7210.69.0000, 7210.70.6030, 
7210.70.6060, 7210.70.6090, 7210.90.6000, 7210.90.9000, 7212.20.0000, 
7212.30.1030, 7212.30.1090, 7212.30.3000, 7212.30.5000, 7212.40.1000, 
7212.40.5000, 7212.50.0000, and 7212.60.0000.
    The products subject to the order may also enter under the 
following HTSUS item numbers: 7210.90.1000, 7215.90.1000, 7215.90.3000, 
7215.90.5000, 7217.20.1500, 7217.30.1530, 7217.30.1560, 7217.90.1000, 
7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.91.0000, 7225.92.0000, 
7225.99.0090, 7226.99.0110, 7226.99.0130, 7226.99.0180, 7228.60.6000, 
7228.60.8000, and 7229.90.1000.
    The HTSUS subheadings above are provided for convenience and 
customs purposes only. The written description of the scope of the 
order is dispositive.

Final Determination of No Shipments

    In the Preliminary Results, Commerce determined that NSSVC, HSG, 
and TDA had no shipments of subject merchandise during the POR.\2\ As 
Commerce did not receive any comments on its preliminary finding, 
Commerce continues to find that NSSVC, HSG, and TDA did not have any 
shipments of subject merchandise during the POR and intends to instruct 
U.S. Customs and Border Protection (CBP) to liquidate any suspended 
entries that entered under that exporter's case number (i.e., at that 
exporter's cash deposit rate) at the China-wide entity rate, 199.43 
percent.\3\ Commerce intends to issue appropriate assessment 
instructions directly to CBP no earlier than 35 days after the date of 
publication of this notice in the Federal Register.
---------------------------------------------------------------------------

    \2\ Id.
    \3\ See Non-Market Economy Antidumping Proceedings: Assessment 
of Antidumping Duties, 76 FR 65694, 65695 (October 24, 2011); see 
also Certain Corrosion-Resistant Steel Products from the People's 
Republic of China: Final Determination of Sales at Less Than Fair 
Value, and Final Affirmative Critical Circumstances Determination, 
in Part, 81 FR 35316 (June 2, 2016).
---------------------------------------------------------------------------

Notification to Importers

    This notice serves as a final reminder to importers of their 
responsibility under 19 CFR 351.402(f)(2) to file a certificate 
regarding the reimbursement of antidumping duties prior to liquidation 
of the relevant entries during this review period. Failure to comply 
with this requirement could result in Commerce's presumption that 
reimbursement of antidumping duties occurred and the subsequent 
assessment of doubled antidumping duties.

Notification Regarding Administrative Protection Order

    This notice also serves as the only reminder to parties subject to 
administrative protective order (APO) of their responsibility 
concerning the disposition of proprietary information disclosed under 
APO in accordance with 19 CFR 351.305(a)(3). Timely written 
notification of the return of destruction of APO materials or 
conversion to judicial protective order is hereby requested. Failure to 
comply with the regulations and the terms of an APO is a sanctionable 
violation.

Notification to Interested Parties

    This notice is issued and published in accordance with sections 
751(a) and 777(i) of the Act, and 19 CFR 351.213(h).

    Dated: March 22, 2021.
Christian Marsh,
Acting Assistant Secretary for Enforcement and Compliance.
[FR Doc. 2021-06296 Filed 3-25-21; 8:45 am]
BILLING CODE 3510-DS-P