[Federal Register Volume 86, Number 43 (Monday, March 8, 2021)]
[Notices]
[Pages 13295-13296]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-04743]



[[Page 13295]]

-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-801-001]


Common Alloy Aluminum Sheet From Serbia: Final Determination of 
Sales at Less Than Fair Value

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: The Department of Commerce (Commerce) determines that imports 
of common alloy aluminum sheet (aluminum sheet) from Serbia are being, 
or are likely to be, sold in the United States at less than fair value 
(LTFV) for the period of investigation January 1, 2019, through 
December 31, 2019.

DATES: Applicable March 8, 2021.

FOR FURTHER INFORMATION CONTACT: Jaron Moore or Katherine Johnson, AD/
CVD Operations, Office VIII, Enforcement and Compliance, International 
Trade Administration, U.S. Department of Commerce, 1401 Constitution 
Avenue NW, Washington, DC 20230; telephone: (202) 482-3640 or (202) 
482-4929, respectively.

SUPPLEMENTARY INFORMATION:

Background

    On October 15, 2020, Commerce published in the Federal Register its 
preliminary affirmative determination in the LTFV investigation of 
aluminum sheet from Serbia, in which we also postponed the final 
determination until March 1, 2021.\1\ We invited interested parties to 
comment on the Preliminary Determination. A summary of the events that 
occurred since Commerce published the Preliminary Determination, may be 
found in the Issues and Decision Memorandum.\2\
---------------------------------------------------------------------------

    \1\ See Common Alloy Aluminum Sheet from Serbia: Preliminary 
Affirmative Determination of Sales at Less Than Fair Value, 
Postponement of Final Determination, and Extension of Provisional 
Measures, 85 FR 65386 (October 15, 2020) (Preliminary 
Determination), and accompanying Preliminary Decision Memorandum.
    \2\ See Memorandum, ``Issues and Decision Memorandum for the 
Final Affirmative Determination in the Less-Than-Fair-Value 
Investigation of Common Alloy Aluminum Sheet from Serbia,'' dated 
concurrently with, and hereby adopted by, this notice (Issues and 
Decision Memorandum).
---------------------------------------------------------------------------

Scope of the Investigation

    The product covered by this investigation is aluminum sheet from 
Serbia. For a complete description of the scope of this investigation, 
see Appendix I.

Scope Comments

    During the course of this investigation, Commerce received scope 
comments from interested parties. Commerce issued a Preliminary Scope 
Decision Memorandum to address these comments.\3\ We received comments 
from interested parties on the Preliminary Scope Decision Memorandum, 
which we address in the Final Scope Decision Memorandum.\4\ Commerce is 
not modifying the scope language as it appeared in the Preliminary 
Determination. See Appendix I for the final scope of the investigation.
---------------------------------------------------------------------------

    \3\ See Memorandum, ``Common Alloy Aluminum Sheet from Bahrain, 
Brazil, Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, 
Republic of Korea, Oman, Romania, Serbia, Slovenia, South Africa, 
Spain, Taiwan, and Turkey: Scope Comments Decision Memorandum for 
the Preliminary Determinations,'' dated October 6, 2020 (Preliminary 
Scope Decision Memorandum).
    \4\ See Memorandum, ``Common Alloy Aluminum Sheet from Bahrain, 
Brazil, Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, 
Republic of Korea, Oman, Romania, Serbia, Slovenia, South Africa, 
Spain, Taiwan, and Turkey: Scope Comments Final Decision 
Memorandum,'' dated concurrently with, and hereby adopted by, this 
notice (Final Scope Decision Memorandum).
---------------------------------------------------------------------------

Analysis of Comments Received

    All issues raised in the case and rebuttal briefs that were 
submitted by parties in this investigation are addressed in the Issues 
and Decision Memorandum. A list of the issues addressed in the Issues 
and Decision Memorandum is attached to this notice at Appendix II. The 
Issues and Decision Memorandum is a public document and is on file 
electronically via Enforcement and Compliance's Antidumping and 
Countervailing Duty Centralized Electronic Service System (ACCESS). 
ACCESS is available to registered users at https://access.trade.gov. In 
addition, a complete version of the Issues and Decision Memorandum can 
be accessed directly at http://enforcement.trade.gov/frn. The signed 
and electronic versions of the Issues and Decision Memorandum are 
identical in content.

Verification

    Commerce was unable to conduct on-site verification of the 
information relied upon in making its final determination in this 
investigation. However, we took additional steps in lieu of an on-site 
verification to verify the information relied upon in making this final 
determination, in accordance with section 782(i) of the Tariff Act of 
1930, as amended (the Act).\5\
---------------------------------------------------------------------------

    \5\ See Commerce's Letter, ``In Lieu of Verification 
Supplemental,'' dated December 9, 2020; see also Impol's Letter, 
``Response to In Lieu of Verification Questionnaire,'' dated 
December 17, 2020.
---------------------------------------------------------------------------

Changes Since the Preliminary Determination

    Based on our analysis of the comments received and our findings 
related to our request for information in lieu of on-site verification, 
we made certain changes to the margin calculation for Impol d.o.o. and 
Impol Seval, a.d. (collectively, Impol), the only mandatory respondent 
that participated in this investigation. For a discussion of these 
changes, see the ``Changes from the Preliminary Determination'' section 
of the Issues and Decision Memorandum. We made no change to the adverse 
facts available (AFA) rate applied to Otovici d.o.o., the mandatory 
respondent which failed to participate in this investigation, as we 
received no comments on the application of this rate and the facts have 
not changed with respect to this company.

All-Others Rate

    Section 735(c)(5)(A) of the Act provides that the estimated 
weighted-average dumping margin for all other producers and exporters 
not individually investigated shall be equal to the weighted average of 
the estimated weighted-average dumping margins established for 
exporters and producers individually investigated excluding rates that 
are zero, de minimis, or determined entirely under section 776 of the 
Act. Commerce calculated an individual estimated weighted-average 
dumping margin for Impol, the only individually examined exporter/
producer in this investigation. Because the only individually 
calculated dumping margin is not zero, de minimis, or based entirely on 
facts otherwise available, the estimated weighted-average dumping 
margin calculated for Impol is the margin assigned to all other 
producers and exporters, pursuant to section 735(c)(5)(A) of the Act.

Final Determination

    The final estimated weighted-average dumping margins are as 
follows:
---------------------------------------------------------------------------

    \6\ The final rate calculated for Impol in this investigation 
applies to subject merchandise produced by Impol Seval and exported 
by either Impol Seval (Serbia) or Impol d.o.o. (Slovenia).

------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Impol d.o.o./Impol Seval, a.d.\6\...........................       11.67
Otovici Doo.................................................     * 25.84
All Others..................................................       11.67
------------------------------------------------------------------------
* Margin is based on AFA.


[[Page 13296]]

Disclosure

    We intend to disclose the calculations performed in this final 
determination within five days of the date of publication of this 
notice to parties in this proceeding in accordance with 19 CFR 
351.224(b).

Continuation of Suspension of Liquidation

    In accordance with section 735(c)(1)(B) of the Act, Commerce will 
instruct U.S. Customs and Border Protection (CBP) to continue to 
suspend liquidation of all appropriate entries of aluminum sheet from 
Serbia, as described in Appendix I of this notice, which are entered, 
or withdrawn from warehouse, for consumption on or after October 15, 
2020, the date of publication in the Federal Register of the 
affirmative Preliminary Determination.
    Pursuant to section 735(c)(1)(B)(ii) of the Act and 19 CFR 
351.210(d), we will instruct CBP to require a cash deposit for such 
entries of merchandise equal to the estimated weighted-average dumping 
margin as follows: (1) The cash deposit rate for the respondent listed 
above will be equal to the respondent-specific estimated weighted-
average dumping margin determined in this final determination; (2) if 
the exporter is not a respondent identified above but the producer is, 
then the cash deposit rate will be equal to the respondent-specific 
estimated weighted-average dumping margin established for that producer 
of the subject merchandise; and (3) the cash deposit rate for all other 
producers and exporters will be equal to the all-others estimated 
weighted-average dumping margin. These suspension-of-liquidation 
instructions will remain in effect until further notice.

International Trade Commission Notification

    In accordance with section 735(d) of the Act, we will notify the 
International Trade Commission (ITC) of the final affirmative 
determination of sales at LTFV. Because Commerce's final determination 
is affirmative, in accordance with section 735(b)(2) of the Act, the 
ITC will make its final determination as to whether the domestic 
industry in the United States is materially injured, or threatened with 
material injury, by reason of imports or sales (or the likelihood of 
sales) for importation of aluminum sheet no later than 45 days after 
this final determination. If the ITC determines that such injury does 
not exist, this proceeding will be terminated, and all cash deposits 
posted will be refunded and suspension of liquidation will be lifted. 
If the ITC determines that such injury does exist, Commerce will issue 
an antidumping duty (AD) order directing CBP to assess, upon further 
instruction by Commerce, AD duties on all imports of the subject 
merchandise entered, or withdrawn from warehouse, for consumption on or 
after the effective date of the suspension of liquidation, as discussed 
above in the ``Continuation of Suspension of Liquidation'' section.

Notification Regarding Administrative Protective Orders

    This notice will serve as a final reminder to the parties subject 
to administrative protective order (APO) of their responsibility 
concerning the disposition of proprietary information disclosed under 
APO in accordance with 19 CFR 351.305(a)(3). Timely written 
notification of return or destruction of APO materials or conversion to 
judicial protective order is hereby requested. Failure to comply with 
the regulations and the terms of an APO is a sanctionable violation.

Notification to Interested Parties

    This determination and this notice are issued and published 
pursuant to sections 735(d) and 777(i)(1) of the Act, and 19 CFR 
351.210(c).

    Dated: March 1, 2021.
Christian Marsh,
Acting Assistant Secretary for Enforcement and Compliance.

Appendix I

Scope of the Investigation

    The products covered by this investigation are common alloy 
aluminum sheet, which is a flat-rolled aluminum product having a 
thickness of 6.3 mm or less, but greater than 0.2 mm, in coils or 
cut-to-length, regardless of width. Common alloy sheet within the 
scope of this investigation includes both not clad aluminum sheet, 
as well as multi-alloy, clad aluminum sheet. With respect to not 
clad aluminum sheet, common alloy sheet is manufactured from a 1XXX-
, 3XXX-, or 5XXX-series alloy as designated by the Aluminum 
Association. With respect to multi-alloy, clad aluminum sheet, 
common alloy sheet is produced from a 3XXX-series core, to which 
cladding layers are applied to either one or both sides of the core. 
The use of a proprietary alloy or non-proprietary alloy that is not 
specifically registered by the Aluminum Association as a discrete 
1XXX-, 3XXX-, or 5XXX-series alloy, but that otherwise has a 
chemistry that is consistent with these designations, does not 
remove an otherwise in-scope product from the scope.
    Common alloy sheet may be made to ASTM specification B209-14 but 
can also be made to other specifications. Regardless of 
specification, however, all common alloy sheet meeting the scope 
description is included in the scope. Subject merchandise includes 
common alloy sheet that has been further processed in a third 
country, including but not limited to annealing, tempering, 
painting, varnishing, trimming, cutting, punching, and/or slitting, 
or any other processing that would not otherwise remove the 
merchandise from the scope of this investigation if performed in the 
country of manufacture of the common alloy sheet.
    Excluded from the scope of this investigation is aluminum can 
stock, which is suitable for use in the manufacture of aluminum 
beverage cans, lids of such cans, or tabs used to open such cans. 
Aluminum can stock is produced to gauges that range from 0.200 mm to 
0.292 mm, and has an H-19, H-41, H-48, H-39, or H-391 temper. In 
addition, aluminum can stock has a lubricant applied to the flat 
surfaces of the can stock to facilitate its movement through 
machines used in the manufacture of beverage cans. Aluminum can 
stock is properly classified under Harmonized Tariff Schedule of the 
United States (HTSUS) subheadings 7606.12.3045 and 7606.12.3055.
    Where the nominal and actual measurements vary, a product is 
within the scope if application of either the nominal or actual 
measurement would place it within the scope based on the definitions 
set for the above.
    Common alloy sheet is currently classifiable under HTSUS 
subheadings 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000, 
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095. Further, 
merchandise that falls within the scope of this investigation may 
also be entered into the United States under HTSUS subheadings 
7606.11.3030, 7606.12.3015, 7606.12.3025, 7606.12.3035, 
7606.12.3091, 7606.91.3055, 7606.91.6055, 7606.92.3025, 
7606.92.6055, 7607.11.9090. Although the HTSUS subheadings are 
provided for convenience and customs purposes, the written 
description of the scope of this investigation is dispositive.

Appendix II

List of Topics Discussed in the Issues and Decision Memorandum

I. Summary
II. Background
III. Changes from the Preliminary Determination
IV. Discussion of the Issues
    Comment 1: Whether Commerce Should Apply Partial Adverse Facts 
Available (AFA) to Impol's Reported Yield Loss and Costs Associated 
with Non-Recoverable Scrap
    Comment 2: Impol d.o.o.'s General and Administrative (G&A) 
Expenses
    Comment 3: U.S. and Home Market Sales Databases
    Comment 4: U.S. Credit Expenses
    Comment 5: Selection of Appropriate Gross Unit Price in the Home 
Market
V. Recommendation

[FR Doc. 2021-04743 Filed 3-5-21; 8:45 am]
BILLING CODE 3510-DS-P