[Federal Register Volume 86, Number 25 (Tuesday, February 9, 2021)]
[Notices]
[Pages 8786-8791]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-02660]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2020-0077; FRL-10018-37]
Certain New Chemicals; Receipt and Status Information for
November 2020
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 11/01/
2020 to 11/30/2020.
DATES: Comments identified by the specific case number provided in this
document must be received on or before March 11, 2021.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2020-0077, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental
[[Page 8787]]
Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-
0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at http://www.epa.gov/dockets/contacts.html.
Due to the public health concerns related to COVID-19, the EPA
Docket Center (EPA/DC) and Reading Room is closed to visitors with
limited exceptions. The staff continues to provide remote customer
service via email, phone, and webform. For the latest status
information on EPA/DC services and docket access, visit https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, Project Management and Operations Division (7407M), Office of
Pollution Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number:
(202) 564-8593; email address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 11/01/2020 to 11/30/2020. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et
seq., a chemical substance may be either an ``existing'' chemical
substance or a ``new'' chemical substance. Any chemical substance that
is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory)
is classified as a ``new chemical substance,'' while a chemical
substance that is listed on the TSCA Inventory is classified as an
``existing chemical substance.'' (See TSCA section 3(11).) For more
information about the TSCA Inventory please go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: http://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7)). Since the
passage of the Lautenberg amendments to TSCA in 2016, public interest
in information on the status of section 5 cases under EPA review and,
in particular, the final determination of such cases, has increased. In
an effort to be responsive to the regulated community, the users of
this information, and the general public, to comply with the
requirements of TSCA, to conserve EPA resources and to streamline the
process and make it more timely, EPA is providing information on its
website about cases reviewed under the amended TSCA, including the
section 5 PMN/SNUN/MCAN and exemption notices received, the date of
receipt, the final EPA determination on the notice, and the effective
date of
[[Page 8788]]
EPA's determination for PMN/SNUN/MCAN notices on its website at:
https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is
updated on a weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved * From 11/01/2020 to 11/30/2020
----------------------------------------------------------------------------------------------------------------
Case No. Version Received date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
J-20-0005.......... 2 10/16/2020 CBI............. (G) Ethanol (G) Saccharomyces
production. cerevisiae modified.
J-20-0013.......... 3 10/27/2020 Greenlight (G) Production of (G) Modified strains
Biociences, Inc. enzymes for use in of Escherichia coli.
internal
manufacturing.
J-20-0014.......... 3 10/27/2020 Greenlight (G) Production of (G) Modified strains
Biociences, Inc. enzymes for use in of Escherichia coli.
internal
manufacturing.
J-20-0015.......... 3 10/27/2020 Greenlight (G) Production of (G) Modified strains
Biociences, Inc. enzymes for use in of Escherichia coli.
internal
manufacturing.
J-20-0016.......... 3 10/27/2020 Greenlight (G) Production of (G) Modified strains
Biociences, Inc. enzymes for use in of Escherichia coli.
internal
manufacturing.
J-20-0017.......... 3 10/27/2020 Greenlight (G) Production of (G) Modified strains
Biociences, Inc. enzymes for use in of Escherichia coli.
internal
manufacturing.
J-20-0018.......... 3 10/27/2020 Greenlight (G) Production of (G) Modified strains
Biociences, Inc. enzymes for use in of Escherichia coli.
internal
manufacturing.
J-20-0025.......... 3 11/03/2020 CBI............. (G) Ethanol (G) Biofuel producing
production. Saccharomyces
cerevisiae modified,
genetically stable.
P-18-0057A......... 12 11/12/2020 CBI............. (S) a drier (G) Vanadium
accelerator that is Carboxylate.
used for superior
drying performance
in solvent-borne and
waterborne air-dried
paints, inks and
coatings.
P-18-0057A......... 13 11/18/2020 CBI............. (S) a drier (G) Vanadium
accelerator that is Carboxylate.
used for superior
drying performance
in solvent-borne and
waterborne air-dried
paints, inks and
coatings.
P-18-0057A......... 14 11/23/2020 CBI............. (S) a drier (G) Vanadium
accelerator that is Carboxylate.
used for superior
drying performance
in solvent-borne and
waterborne air-dried
paints, inks and
coatings.
P-18-0084A......... 9 11/23/2020 ShayoNano USA, (S) Additive for (S) silicon zinc
Inc. water-based paints oxide.
and coatings.
P-18-0256A......... 7 11/11/2020 CBI............. (G) Chemical (S) Undecanol,
Intermediate. branched.
P-18-0293A......... 6 11/17/2020 CBI............. (S) Monomer for use (S) Propanedioic
in emulsion acid, 2-methylene-,
polymers, formulated 1,3-dihexyl ester.
industrial coatings,
industrial adhesives.
P-18-0293A......... 7 11/20/2020 CBI............. (S) Monomer for use (S) Propanedioic
in emulsion acid, 2-methylene-,
polymers, formulated 1,3-dihexyl ester.
industrial coatings,
industrial adhesives.
P-18-0294A......... 6 11/17/2020 CBI............. (S) Monomer for use (S) Propanedioic
in emulsion acid, 2-methylene-,
polymers, formulated 1,3-dicyclohexyl
industrial coatings, ester.
industrial adhesives.
P-18-0294A......... 7 11/20/2020 CBI............. (S) Monomer for use (S) Propanedioic
in emulsion acid, 2-methylene-,
polymers, formulated 1,3-dicyclohexyl
industrial coatings, ester.
industrial adhesive.
P-18-0345A......... 3 11/24/2020 Chitec (S) R-gen 990 is a (S) 1-Butanone, 2-
Technology Co., liquid aminoketone- (dimethylamino)-1-[4-
Ltd. based photoinitator (2-ethyl-2-methyl-3-
(PI) intended for oxazolidinyl)phenyl]-
use as an 2-(phenylmethyl)-.
ultraviolet (UV)
curing agent in
highly pigmented
inks, photoresists,
and masks.
[[Page 8789]]
P-19-0082A......... 5 11/12/2020 Bedoukian (S) Fragrance uses (S) Heptanal, 6-
Research Inc. per FFDCA: Fine hydroxy-2,6-dimethyl-
fragrance, creams, .
lotions, etc., TSCA:
Scented papers,
candles, detergents,
cleaners, etc.
P-20-0010A......... 11 11/04/2020 CBI............. (G) Polymerization (G) Carboxylic acid,
auxiliary. reaction products
with metal
hydroxide, inorganic
dioxide and metal.
P-20-0031A......... 5 11/02/2020 CBI............. (G) Intermediate..... (G) Perfluorinated
substituted 1,3-
oxathiolane dioxide.
P-20-0070A......... 2 11/07/2020 Clariant (S) Solvent for use (S) Nonanamide, N,N-
Corporation. in formulated dimethyl-.
pesticide products.
P-20-0076A......... 4 11/04/2020 Cytec Industries (G) Mining chemical.. (S) Glycine, reaction
Inc. products with sodium
O-iso-Pr
carbonodithioate,
sodium salts.
P-20-0077A......... 6 11/23/2020 CBI............. (S) UV Curing Agent (G) 1-(dialkyl-
for use in Inks and diphenylene alkane)-
Coatings. 2-alkyl-2-
hydrooxazine-1-
alkylketone.
P-20-0078A......... 2 11/11/2020 Ascend (G) Stabilizer for (G) Dicarboxylic
Performance industrial acid, compd. with
Materials. applications. aminoalkyl-
alkyldiamine
alkyldioate
alkyldioate
(1:2:1:1).
P-20-0079A......... 2 11/11/2020 Ascend (G) Stabilizer for (G) Dicarboxylic
Performance industrial acid, compd. with
Materials. applications. aminoalkyl-
alkyldiamine (3:2).
P-20-0080A......... 5 11/11/2020 Ascend (G) Stabilizer for (G) Alkyldiamine,
Performance industrial aminoalkyl-,
Materials. applications. hydrochloride (1:3).
P-20-0081A......... 5 11/11/2020 Ascend (G) A stabilizer for (G) Carboxylic acid,
Performance industrial compd. with
Materials. applications. aminoalkyl-
alkyldiamine (3:1).
P-20-0082A......... 5 11/11/2020 Ascend (G) Stabilizer for (G) Alkyldiamine,
Performance industrial aminoalkyl-,
Materials. applications. carboxylate (1:3).
P-20-0094A......... 3 11/12/2020 CBI............. (S) Formulation (G) Alkanedioic acid,
component in UV/EB polymer with tri-
coatings, inks and alkyl-
3D printing/ isocyanatocarbomonoc
stereolithography/ ycle,
additive and dialkylglycols,
adhesive ester with 2,3-
manufacturing. dihydroxypropyl
alkyl ester, 2-
hydroxyethyl
methacrylate-
blocked.
P-20-0105A......... 3 11/25/2020 Sound (S) Maltol lactone is (S) 4H-Pyran-4-one, 3-
Agriculture a compound that [(2,5-dihydro-4-
Company. promotes microbial methyl-5-oxo-2-
activity in the furanyl)oxy]-2-
soil, resulting in methyl-.
increased
availability of
phosphorus for
crops. This
substance will be
used on commercial
farming operations.
P-20-0127A......... 4 11/12/2020 Kuraray America, (S) Industrial (S) 2H-Pyran,
Inc. Solvent. tetrahydro-4-methyl-
.
P-20-0138A......... 4 11/20/2020 Gurit (USA) Inc. (S) The substance is (G) Alkane diglycidy
part of a mixture ether, polymer with
with other amines to alkyl-cycloalkane
act as a curative diamines.
for a 2-part epoxy
adhesive
formulation. The new
substance will be
used within an
adhesive formulation
for use within an
industrial setting
primarily but not
limited to
industries such as
marine, automotive
and wind energy.
P-20-0146A......... 2 11/06/2020 CBI............. (G) Insulating (G) Alkanoic acid,
material for alkyl,
electrical parts. carbopolycyclic
alkyl ester.
P-20-0148.......... 2 11/12/2020 Solugen Inc..... (G) Additive for (G) Hydroxyalkanoic
consumer, acid, salt,
industrial, and oxidized.
commercial uses.
P-20-0149.......... 2 11/12/2020 Solugen Inc..... (G) Additive for (G) Hydroxyalkanoic
consumer, acid, salt,
industrial, and oxidized.
commercial uses.
P-20-0150.......... 2 11/12/2020 Solugen, Inc.... (G) Additive for (G) Hydroxyalkanoic
consumer, acid, salt,
industrial, and oxidized.
commercial uses.
P-20-0151.......... 2 11/12/2020 Solugen, Inc.... (G) Additive for (G) Hydroxyalkanoic
consumer, acid, salt,
industrial, and oxidized.
commercial uses.
P-20-0153A......... 4 11/04/2020 CBI............. (G) lubricant (G) Polyamines,
additive--dispersant. reaction products
with succinic
anhydride
polyalkenyl derivs.,
borates.
P-20-0154A......... 4 11/04/2020 CBI............. (G) lubricant (G) Polyamines,
additive--dispersant. reaction products
with succinic
anhydride
polyalkenyl derivs.,
borates.
P-20-0161A......... 2 11/04/2020 Sirrus, Inc..... (S) Film former or (S) Propanedioic
crosslinker additive acid, 2-methylene-,
used in coatings, 1,3-diethyl ester,
waterborne polymer with 1,4-
emulsions, adhesives. butanediol.
[[Page 8790]]
P-20-0169.......... 3 11/23/2020 CBI............. (G) Battery Plastics (S) multiwalled
and coatings carbon nanotube.
applications,
Conductive agent for
conductive plastic
and paint.
P-20-0183A......... 2 11/16/2020 CBI............. (G) Intermediate..... (G) Aryl ether
epoxide,
homopolymer, ether
with alkanolamine.
P-21-0003.......... 3 11/04/2020 CBI............. (G) Polymeric film (G) 4, 4 methylenebis
former for coatings. (2, 6 dimethyl
phenol) polymer with
2- (chloromethyl)
oxirane, 1,4-benzene
diol, 2-methyl-2-
propenoic acid,
mixed alkyl
substituted 2-methyl
2-propenoate, and
ethyl 2-propenoate,
reaction products
with 2-
(dimthylamino)
ethanol.
P-21-0004.......... 3 11/11/2020 CBI............. (G) Surfactant....... (G) Poly alkyl glycol
alkyl ether.
P-21-0011.......... 2 11/04/2020 CBI............. (S) Crosslinking (G) Hexane, 1,6-
agent for inks and diisocyanato-,
coatings. homopolymer, alkyl
epoxy ether- and
polyethylene glycol
mono-Me ether-
blocked, reaction
products with
propylenimine.
P-21-0012.......... 1 10/28/2020 CBI............. (G) The notified (G)
substance will be Multialkylbicycloalk
used as a fragrance enyl substituted
ingredient. propanenitrile.
P-21-0013.......... 2 11/24/2020 Takasago........ (S) Fragrance in fine (G) methyl
fragrance, phenylethyl
deodorants and cyclopropanemethanol
cosmetics, household .
products such as
laundry detergents
and air fresheners,
Shampoos and Body
Washes.
P-21-0014.......... 2 11/06/2020 CBI............. (G) oil and gas (G) Aliphatic
extraction. alcohol, bis-tetra-
alkyl ammonium,
chloride salts.
P-21-0015.......... 1 10/30/2020 Designer (S) As a raw material (S) Amines, C36-
Molecules, Inc. in a Temporary alkylenedi-,
Bonding Adhesive polymers with 5,5'-
formulation. [(1-
methylethylidene)bis
(4,1-
phenyleneoxy)]bis[1,
3-
isobenzofurandione]
and 4,4'-[2,2,2-
trifluoro-1-
(trifluoromethyl)eth
ylidene]bis[2-
aminophenol].
P-21-0016.......... 1 11/02/2020 CBI............. (G) Paint additive, (G) Alkanoic acid,
Additive in coating dialkyl ester.
formulations,
Component in
cleaning agents.
P-21-0017.......... 1 11/12/2020 Sumitomo (S) Substance used to (G) [(Substituted-
Chemical improve physical carbomonocyclic)
Advanced properties in rubber amino] oxoalkenoic
Technologies products. acid, inorganic
LLC. salt.
P-21-0018.......... 1 11/12/2020 Shin-Etsu (G) Contained use for (G) Sulfonium,
Microsi. microlithography for triphenyl-,
electronic device heterocyclic
manufacturing. compound-carboxylate
(1:1).
P-21-0019.......... 2 11/17/2020 CBI............. (G) The notified (G) Ethyl 4-alkyl-2-
substance will be oxocycloalkanecarbox
used as a fragrance ylate.
ingredient.
P-21-0022.......... 1 11/20/2020 CBI............. (S) Flexographic (G) Rosin acid
water-based Ink & esters.
coating vehicle.
P-21-0023.......... 1 11/23/2020 CBI............. (G) Photolithography. (G) Sulfonium,
carbocyclic-, salt
with 1-(alkyl) 2-[4-
[polyhydro-2-
carbomonocyclic-5-
(polyfluoro-2-
sulfoalkyl)-4,7-
methano-1,3-
benzodioxol-2-
yl]carbomonocyclic
oxy]acetate (1:1).
P-21-0027.......... 1 11/23/2020 CBI............. (G) An ingredient (G) Heteropolycyclic,
used in the trihaloalkyl
manufacture of carbomonocycle-,
photoresist. hydroxy
carbomonocyclic
salt.
SN-17-0006A........ 5 10/29/2020 CBI............. (G) Physical (G) Potassium
characteristics Titanate.
modifier for
industrial use in
certain solid
composite articles.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission prior to the start of the 90 day review
period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned
[[Page 8791]]
to the NOC including whether the submission was an initial or amended
submission, the date the NOC was received by EPA, the date of
commencement provided by the submitter in the NOC, a notation of the
type of amendment (e.g., amendment to generic name, specific name,
technical contact information, etc.) and chemical substance identity.
Table II--NOCs Approved * From 11/01/2020 to 11/30/2020
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type of
Case No. Received date date amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
P-09-0492............... 10/30/2020 10/29/2020 N....................... (G) Isocyanate polymer,
amine blocked.
P-17-0387............... 11/03/2020 10/22/2020 N....................... (G) Dicarboxylic acids,
polymers with alkanoic
acid, alkanediol,
substituted-alkylalkanoic
acid, substituted alkyl
carbomonocyle,
alkanedioic acid and
alkanediol, alkanolamine
blocked, compds. with
alkanolamine.
P-18-0355............... 11/19/2020 11/10/2020 N....................... (G) Alkanediol,
substituted alkyl,
polymer with
carbomonocyle,
alkanedioate substituted
carbomonocycle, ester
with substituted
alkanoate.
P-19-0038............... 11/23/2020 11/20/2020 N....................... (S) Fatty acids, coco, iso-
bu esters.
P-20-0098............... 11/20/2020 11/13/2020 N....................... (G) Calcium
cycloaklylcarboxylate.
P-20-0160............... 11/23/2020 11/18/2020 N....................... (S) Amines,c36-alkylenedi-
, polymers with
bicyclo[2.2.1]heptanedime
thanamine, [5,5'-
biisobenzofuran]-
1,1',3,3'-tetrone and
3a,4,4a,7a,8,8a-hexahydro-
4,8-ethano1h,3h-benzo[1,2-
c:4,5-c']difuran-1,3,5,7-
tetrone, maleated.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table III--Test Information Received From 11/01/2020 to 11/30/2020
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
P-20-0066...................... 11/24/2020 Daphnia Magna Reproduction (G) 2-propenoic acid, 2-
Study (OECD Test Guideline hydroxyethyl ester, reaction
211). products with dialkyl hydrogen
heterosubstituted phosphate and
dimethyl phosphonate.
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: January 5, 2021.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2021-02660 Filed 2-8-21; 8:45 am]
BILLING CODE 6560-50-P