[Federal Register Volume 85, Number 224 (Thursday, November 19, 2020)] [Rules and Regulations] [Pages 73640-73642] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2020-23552] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 52 [EPA-R09-OAR-2019-0127; FRL-10014-90-Region 9] Air Plan Approval; California; Sacramento Metropolitan Air Quality Management District AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. ----------------------------------------------------------------------- SUMMARY: The Environmental Protection Agency (EPA) is taking final action to approve revisions to the Sacramento Metropolitan Air Quality Management District (SMAQMD) portion of the California State Implementation Plan (SIP). These revisions concern emissions of volatile organic compounds (VOCs) from the surface coating operations of plastic parts and products. We are approving a local rule to regulate these emission sources under the Clean Air Act (CAA or the ``Act''), and we are approving a negative [[Page 73641]] declaration for a subcategory of a control techniques guidelines (CTG) source in the SMAQMD. DATES: This rule will be effective on December 21, 2020. ADDRESSES: The EPA has established a docket for this action under Docket ID No. EPA-R09-OAR-2019-0127. All documents in the docket are listed on the https://www.regulations.gov website. Although listed in the index, some information is not publicly available, e.g., Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, is not placed on the internet and will be publicly available only in hard copy form. Publicly available docket materials are available through https://www.regulations.gov, or please contact the person identified in the FOR FURTHER INFORMATION CONTACT section for additional availability information. If you need assistance in a language other than English or if you are a person with disabilities who needs a reasonable accommodation at no cost to you, please contact the person identified in the FOR FURTHER INFORMATION CONTACT section. FOR FURTHER INFORMATION CONTACT: Arnold Lazarus, EPA Region IX, (415) 972-3024, [email protected]. SUPPLEMENTARY INFORMATION: Throughout this document, ``we,'' ``us'' and ``our'' refer to the EPA. Table of Contents I. Proposed Action II. Public Comments and EPA Responses III. EPA Action IV. Incorporation by Reference V. Statutory and Executive Order Reviews I. Proposed Action On July 23, 2020 (85 FR 44496), the EPA proposed to approve the following rule and negative declaration, listed in Table 1, into the California SIP. Table 1--Submitted Rule and Negative Declaration ---------------------------------------------------------------------------------------------------------------- Rule Local agency No. Rule title Adopted Submitted ---------------------------------------------------------------------------------------------------------------- SMAQMD................................... 468 Surface Coating of Plastic 03/22/2018 05/23/2018 Parts and Products. SMAQMD................................... ....... Negative Declaration for 03/22/2018 6/11/2018 ``Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings,'' EPA-453/R-08-003, September 2008 (Pleasure Craft Coating Portion Only). ---------------------------------------------------------------------------------------------------------------- We proposed to approve this rule and negative declaration because we determined that they comply with the relevant CAA requirements. Our proposed action contains more information on the rule, the negative declaration and our evaluation. II. Public Comments and EPA Responses The EPA's proposed action provided a 30-day public comment period. During this period, we received no comments. III. EPA Action Pursuant to section 110(k)(3) of the Act, and for the reasons set forth in the proposed rule and related technical support documents, the EPA is fully approving this rule and negative declaration into the California SIP. IV. Incorporation by Reference In this rule, the EPA is finalizing regulatory text that includes incorporation by reference. In accordance with requirements of 1 CFR 51.5, the EPA is finalizing the incorporation by reference of the SMAQMD rule described in the amendments to 40 CFR part 52 set forth below. The EPA has made, and will continue to make, these documents available through www.regulations.gov and at the EPA Region IX Office (please contact the person identified in the FOR FURTHER INFORMATION CONTACT section of this preamble for more information). V. Statutory and Executive Order Reviews Under the Clean Air Act, the Administrator is required to approve a SIP submission that complies with the provisions of the Act and applicable Federal regulations. 42 U.S.C. 7410(k); 40 CFR 52.02(a). Thus, in reviewing SIP submissions, the EPA's role is to approve state choices, provided that they meet the criteria of the Clean Air Act. Accordingly, this action merely approves state law as meeting Federal requirements and does not impose additional requirements beyond those imposed by state law. For that reason, this action:Is not a significant regulatory action subject to review by the Office of Management and Budget under Executive Orders 12866 (58 FR 51735, October 4, 1993) and 13563 (76 FR 3821, January 21, 2011); Is not an Executive Order 13771 (82 FR 9339, February 3, 2017) regulatory action because SIP approvals are exempted under Executive Order 12866; Does not impose an information collection burden under the provisions of the Paperwork Reduction Act (44 U.S.C. 3501 et seq.); Is certified as not having a significant economic impact on a substantial number of small entities under the Regulatory Flexibility Act (5 U.S.C. 601 et seq.); Does not contain any unfunded mandate or significantly or uniquely affect small governments, as described in the Unfunded Mandates Reform Act of 1995 (Pub. L. 104-4); Does not have Federalism implications as specified in Executive Order 13132 (64 FR 43255, August 10, 1999); Is not an economically significant regulatory action based on health or safety risks subject to Executive Order 13045 (62 FR 19885, April 23, 1997); Is not a significant regulatory action subject to Executive Order 13211 (66 FR 28355, May 22, 2001); Is not subject to requirements of Section 12(d) of the National Technology Transfer and Advancement Act of 1995 (15 U.S.C. 272 note) because application of those requirements would be inconsistent with the Clean Air Act; and Does not provide the EPA with the discretionary authority to address, as appropriate, disproportionate human health or environmental effects, using practicable and legally permissible methods, under Executive Order 12898 (59 FR 7629, February 16, 1994). In addition, the SIP is not approved to apply on any Indian reservation land or in any other area where the EPA or an Indian tribe has demonstrated that a tribe has jurisdiction. In those areas of Indian country, the rule does not have tribal implications and will not impose substantial direct costs on tribal governments or preempt tribal law as specified by Executive Order 13175 (65 FR 67249, November 9, 2000). The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the Small [[Page 73642]] Business Regulatory Enforcement Fairness Act of 1996, generally provides that before a rule may take effect, the agency promulgating the rule must submit a rule report, which includes a copy of the rule, to each House of the Congress and to the Comptroller General of the United States. The EPA will submit a report containing this action and other required information to the U.S. Senate, the U.S. House of Representatives, and the Comptroller General of the United States prior to publication of the rule in the Federal Register. A major rule cannot take effect until 60 days after it is published in the Federal Register. This action is not a ``major rule'' as defined by 5 U.S.C. 804(2). Under section 307(b)(1) of the Clean Air Act, petitions for judicial review of this action must be filed in the United States Court of Appeals for the appropriate circuit by January 19, 2021. Filing a petition for reconsideration by the Administrator of this final rule does not affect the finality of this action for the purposes of judicial review nor does it extend the time within which a petition for judicial review may be filed, and shall not postpone the effectiveness of such rule or action. This action may not be challenged later in proceedings to enforce its requirements. (See section 307(b)(2).) List of Subjects in 40 CFR Part 52 Environmental protection, Air pollution control, Incorporation by reference, Intergovernmental relations, Ozone, Particulate matter, Reporting and recordkeeping requirements, Volatile organic compounds. Dated: September 25, 2020. John Busterud, Regional Administrator, Region IX. For the reasons stated in the preamble, the EPA amends, part 52, Chapter I, Title 40 of the Code of Federal Regulations as follows: PART 52--APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS 0 1. The authority citation for part 52 continues to read as follows: Authority: 42 U.S.C. 7401 et seq. Subpart F--California 0 2. Section 52.220 is amended by adding paragraphs (c)(518)(i)(C) and (c)(543) to read as follows: Sec. 52.220 Identification of plan-in part. * * * * * (c) * * * (518) * * * (i) * * * (C) Sacramento Metropolitan Air Quality Management District. (1) Rule 468, ``Surface Coating of Plastic Parts and Products,'' adopted on March 22, 2018. (2) [Reserved] * * * * * (543) Negative declaration for following AQMD was submitted on June 11, 2018 by the Governor's designee. (i) [Reserved] (ii) Additional materials. (A) Sacramento Metropolitan Air Quality Management District. (1) Negative Declaration for ``Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings,'' EPA-453/R-08-003, September 2008 (Pleasure Craft Coating Portion Only), adopted March 22, 2018. (2) [Reserved] (B) [Reserved] 0 3. Section 52.222 is amended by adding paragraph (a)(2)(v) to read as follows: Sec. 52.222 Negative declarations. (a) * * * (2) * * * (v) Negative Declaration for ``Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings,'' EPA-453/R-08-003, September 2008 (Pleasure Craft Coating Portion Only) submitted on June 11, 2018 and adopted on March 22, 2018. * * * * * [FR Doc. 2020-23552 Filed 11-18-20; 8:45 am] BILLING CODE 6560-50-P