[Federal Register Volume 85, Number 209 (Wednesday, October 28, 2020)]
[Notices]
[Pages 68371-68372]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-23816]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2010-0026]


The Mechanical Power Presses Standard; Extension of the Office of 
Management and Budget's (OMB) Approval of Information Collection 
(Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning the proposal to 
extend the Office of Management and Budget's (OMB) approval of the 
information collection requirements specified in the Mechanical Power 
Presses Standard.

DATES: Comments must be submitted (postmarked, sent, or received) by 
December 28, 2020.

ADDRESSES: 
    Electronically: You may submit comments and attachments 
electronically at http://www.regulations.gov, which is the Federal e-
Rulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, Docket No. OSHA-2010-0026, 
Occupational Safety and Health Administration, U.S. Department of 
Labor, Room N-3653, 200 Constitution Avenue NW, Washington, DC 20210. 
Please note: While OSHA's Docket Office is continuing to accept and 
process submissions by regular mail, due to the COVID-19 pandemic, the 
Docket Office is closed to the public and not able to receive 
submissions to the docket by hand, express mail, messenger, and courier 
service.
    Instructions: All submissions must include the agency name and the 
OSHA docket number (OSHA-2010-0026) for the Information Collection 
Request (ICR). All comments, including any personal information you 
provide, such as social security number and date of birth, are placed 
in the public docket without change, and may be made available online 
at http://www.regulations.gov. For further information on submitting 
comments see the ``Public Participation'' heading in the section of 
this notice titled SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the above address. All documents in the docket (including this Federal 
Register notice) are listed in the http://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download from the website. All submissions, 
including copyrighted material, are available for inspection and 
copying at the OSHA Docket Office. You also may contact Theda Kenney at 
the below phone number to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Seleda Perryman, 
Directorate of Standards and Guidance, OSHA, U.S. Department of Labor; 
telephone (202) 693-2222.

SUPPLEMENTARY INFORMATION:

I. Background

    The Department of Labor, as part of the continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accordance with the Paperwork Reduction Act 
(PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that information 
is in the desired format, reporting burden (time and costs) is minimal, 
collection instruments are clearly understood, and OSHA's estimate of 
the information collection burden is accurate. The Occupational Safety 
and Health Act of 1970 (OSH Act) (29 U.S.C. 651 et seq.) authorizes 
information collection by employers as necessary or appropriate for 
enforcement of the OSH Act or for developing information regarding the 
causes and prevention of occupational injuries, illnesses, and 
accidents (29 U.S.C. 657). The OSH Act also requires that OSHA obtain 
such information with minimum burden upon employers, especially those 
operating small businesses, and to reduce to the maximum extent 
feasible unnecessary duplication of efforts in obtaining information 
(29 U.S.C. 657).
    The collection of information contained in the Mechanical Power 
Presses Standard are necessary to reduce workers' risk of death or 
serious injury by ensuring that employers maintain the mechanical power 
presses used by the workers in safe operating condition.
    The following sections describe who uses the information collected 
under each requirement, as well as how they use it.

Section 1910.217(e)(1)(i)

    Paragraph (e)(1)(i) requires employers to establish and follow a 
program of periodic and regular inspections of power presses to ensure 
that all their parts, auxiliary equipment, and safeguards are in safe 
operating condition and adjustment. Employers must maintain a 
certification record of inspections that includes the date of 
inspection, the signature of the person who performed the inspection, 
and the

[[Page 68372]]

serial number, or other identifiers, of the power press that was 
inspected.

Section 1910.217(e)(1)(ii)

    Paragraph (e)(1)(ii) requires employers to inspect and test each 
press no less than weekly to determine the condition of the clutch/
brake mechanism, antirepeat feature, and single-stroke mechanism. 
Employers must perform and complete necessary maintenance or repair or 
both before the press is operated. In addition, employers must maintain 
a record of inspections, tests, and maintenance work. The record must 
include the date of the inspection, test, or maintenance; the signature 
of the person who performed the inspection, test, or maintenance; and 
the serial number, or other identifiers, of the press that was 
inspected, tested, or maintained.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the agency's functions, 
including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    OSHA is requesting a burden hour adjustment decrease of 17,160 
hours from 37,967 hours to 20,807 hours. This change in calculation 
methods accounts for the large decrease in the agency's estimate of 
mechanical power presses currently in service, still an overestimation.
    Type of Review: Extension of a currently approved collection.
    Title: Mechanical Power Presses Standard. (29 CFR 1910.217(e)(1)(i) 
and (e)(1)(ii)).
    OMB Number: 1218-0229.
    Affected Public: Business or other for-profit; farms.
    Number of Respondents: 104,035.
    Frequency of Response: On occasion.
    Total Responses: 62,421.
    Average Time per Response: Various.
    Estimated Total Burden Hours: 20,807.
    Estimated Cost (Operation and Maintenance): $0.

IV. Public Participation--Submission of Comments on This Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at http://www.regulations.gov, which is the Federal 
e-Rulemaking Portal; (2) by facsimile; or (3) by hard copy. All 
comments, attachments, and other material must identify the agency name 
and the OSHA docket number for this ICR (Docket No. OSHA-2010-0026). 
You may supplement electronic submissions by uploading document files 
electronically. If you wish to mail additional materials in reference 
to an electronic or facsimile submission, you must submit them to the 
OSHA Docket Office (see the section of this notice titled ADDRESSES). 
The additional materials must clearly identify your electronic comments 
by your name, date, and the docket number so the agency can attach them 
to your comments.
    Because of security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments. For information about 
security procedures concerning the delivery of materials by hand, 
express delivery, messenger, or courier service, please contact the 
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
    Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as your social security number and 
date of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download from this 
website. All submissions, including copyrighted material, are available 
for inspection and copying at the OSHA Docket Office. Information on 
using the http://www.regulations.gov website to submit comments and 
access the docket is available at the website's ``User Tips'' link. 
Contact the OSHA Docket Office for information about materials not 
available from the website, and for assistance in using the internet to 
locate docket submissions.

V. Authority and Signature

    Loren Sweatt, Principal Deputy Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 
(77 FR 3912).

    Signed at Washington, DC, on October 22, 2020.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor for Occupational Safety 
and Health.
[FR Doc. 2020-23816 Filed 10-27-20; 8:45 am]
BILLING CODE 4510-26-P