[Federal Register Volume 85, Number 200 (Thursday, October 15, 2020)]
[Notices]
[Pages 65340-65342]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-22805]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-523-814]


Common Alloy Aluminum Sheet From the Sultanate of Oman: 
Preliminary Affirmative Determination of Sales at Less Than Fair Value, 
Negative Determination of Critical Circumstances, and Postponement of 
Final Determination

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: The Department of Commerce (Commerce) preliminarily determines 
that common alloy aluminum sheet (aluminum sheet) from the Sultanate of 
Oman (Oman) is being, or is likely to be, sold in the United States at 
less than fair value (LTFV). The period of investigation is January 1, 
2019 through December 31, 2019. Interested parties are invited to 
comment on this preliminary determination.

DATES: Applicable October 15, 2020.

FOR FURTHER INFORMATION CONTACT: Chelsey Simonovich, AD/CVD Operations, 
Office VI, Enforcement and Compliance, International Trade 
Administration, U.S. Department of Commerce, 1401 Constitution Avenue 
NW, Washington, DC 20230; telephone: (202) 482-1979.

SUPPLEMENTARY INFORMATION:

Background

    This preliminary determination is made in accordance with section 
733(b) of the Tariff Act of 1930, as amended (the Act). Commerce 
published the notice of initiation of this investigation on April 7, 
2020.\1\ On July 29, 2020, Commerce postponed the preliminary 
determination of this investigation, and the revised deadline is now 
October 6, 2020.\2\ For a complete description of the events that 
followed the initiation of this investigation, see the Preliminary 
Decision Memorandum.\3\ A list of topics included in the Preliminary 
Decision Memorandum is included as Appendix II to this notice. The 
Preliminary Decision Memorandum is a public document and is on file 
electronically via Enforcement and Compliance's Antidumping and 
Countervailing Duty Centralized Electronic Service System (ACCESS). 
ACCESS is available to registered users at https://access.trade.gov. In 
addition, a complete version of the Preliminary Decision Memorandum can 
be accessed directly at http://enforcement.trade.gov/frn/. The signed 
and the electronic versions of the Preliminary Decision Memorandum are 
identical in content.
---------------------------------------------------------------------------

    \1\ See Common Alloy Aluminum Sheet from Bahrain, Brazil, 
Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, Republic 
of Korea, Oman, Romania, Serbia, Slovenia, South Africa, Spain, 
Taiwan and the Republic of Turkey: Initiation of Less-Than-Fair-
Value Investigations, 85 FR 19444 (April 7, 2020) (Initiation 
Notice).
    \2\ See Common Alloy Aluminum Sheet from Bahrain, Brazil, 
Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, Republic 
of Korea, Oman, Romania, Serbia, Slovenia, South Africa, Spain, 
Taiwan and the Republic of Turkey: Postponement of Preliminary 
Determinations in the Less-Than-Fair-Value Investigations, 85 FR 
45576 (July 29, 2020).
    \3\ See Memorandum, ``Decision Memorandum for the Preliminary 
Determination in the Less-Than-Fair-Value Investigation of Common 
Alloy Aluminum Sheet from Oman,'' dated concurrently with, and 
hereby adopted by, this notice (Preliminary Decision Memorandum).
---------------------------------------------------------------------------

Scope of the Investigation

    The products covered by this investigation are aluminum sheet from 
Oman. For a complete description of the scope of this investigation, 
see Appendix I.

Scope Comments

    In accordance with the preamble to Commerce's regulations,\4\ the 
Initiation Notice set aside a period of time for parties to raise 
issues regarding product coverage (i.e., scope).\5\ Certain interested 
parties commented on the scope of the investigation as it appeared in 
the Initiation Notice. For a summary of the product coverage comments 
and rebuttal responses submitted to the record for this investigation, 
and accompanying discussion and analysis of all comments timely 
received, see the Preliminary Scope Decision Memorandum.\6\ As 
discussed in the Preliminary Scope Decision Memorandum, Commerce is 
preliminarily modifying the scope language as it appeared in the 
Initiation Notice. See the revised scope in Appendix I to this notice.
---------------------------------------------------------------------------

    \4\ See Antidumping Duties; Countervailing Duties, Final Rule, 
62 FR 27296, 27323 (May 19, 1997).
    \5\ See Initiation Notice.
    \6\ See Memorandum, ``Common Alloy Aluminum Sheet from Bahrain, 
Brazil, Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, 
Republic of Korea, Oman, Romania, Serbia, Slovenia, South Africa, 
Spain, Taiwan and the Republic of Turkey: Scope Comments Decision 
Memorandum for the Preliminary Determinations,'' dated October 6, 
2020 (Preliminary Scope Decision Memorandum).
---------------------------------------------------------------------------

    The deadline to submit scope case briefs is established in the 
Preliminary Scope Decision Memorandum. There will be no further 
opportunity for comments on scope-related issues.\7\
---------------------------------------------------------------------------

    \7\ Case briefs, other written comments, and rebuttal briefs 
submitted in response to this preliminary LTFV determination should 
not include scope-related issues. See Preliminary Scope Decision 
Memorandum; see also ``Public Comment'' section of this notice.
---------------------------------------------------------------------------

Methodology

    Commerce is conducting this investigation in accordance with 
section 731 of the Act. Commerce calculated export prices in accordance 
with section 772(a) of the Act. Constructed export prices have been 
calculated in accordance with section 772(b) of the Act. Normal value 
(NV) is calculated in accordance with section 773 of the Act. 
Furthermore, pursuant to sections 776(a) and (b) of the Act, Commerce 
has preliminarily relied on partial facts otherwise available, with 
adverse inferences, for the mandatory respondent Oman Aluminium Rolling

[[Page 65341]]

Company (OARC). For a full description of the methodology underlying 
the preliminary determination, see the Preliminary Decision Memorandum.

Preliminary Negative Determination of Critical Circumstances

    In accordance with section 733(e) of the Act and 19 CFR 351.206, 
Commerce preliminarily determines that critical circumstances do not 
exist with respect to imports of aluminum sheet from OARC or for all 
other exporters or producers not individually examined. For a full 
description of the methodology and results of Commerce's analysis, see 
the Preliminary Decision Memorandum.

All-Others Rate

    Section 733(d)(1)(A)(ii) of the Act provides that in the 
preliminary determination Commerce shall determine an estimated all-
others rate for all exporters and producers not individually examined. 
Pursuant to section 735(c)(5)(A) of the Act, this rate shall be an 
amount equal to the weighted average of the estimated weighted-average 
dumping margins established for exporters and producers individually 
investigated, excluding any zero and de minimis margins, and any 
margins determined entirely under section 776 of the Act. Pursuant to 
section 735(c)(5)(B) of the Act, if the estimated weighted-average 
dumping margins established for all exporters and producers 
individually examined are zero, de minimis or determined based entirely 
on facts otherwise available, Commerce may use any reasonable method to 
establish the estimated weighted-average dumping margin for all other 
producers or exporters.
    In this investigation, the all-others rate is based on the dumping 
margin calculated for OARC, the only entity selected for individual 
examination and for which Commerce calculated a rate.\8\
---------------------------------------------------------------------------

    \8\ See section 735(c)(5)(A) of the Act.
---------------------------------------------------------------------------

Preliminary Determination

    Commerce preliminarily determines that the following estimated 
weighted-average dumping margins exist:
---------------------------------------------------------------------------

    \9\ See Memorandum, ``Decision Memorandum for the Preliminary 
Determination in the Less-Than-Fair-Value Investigation of Common 
Alloy Aluminum Sheet from Oman,'' dated concurrently with, and 
hereby adopted by, this notice.

------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Oman Aluminium Rolling Company (OARC).......................    \9\ 3.53
All Others..................................................        3.53
------------------------------------------------------------------------

Suspension of Liquidation

    In accordance with section 733(d)(2) of the Act, Commerce will 
direct U.S. Customs and Border Protection (CBP) to suspend liquidation 
of entries of subject merchandise, as described in Appendix I, entered, 
or withdrawn from warehouse, for consumption on or after the date of 
publication of this notice in the Federal Register.
    Further, pursuant to section 733(d)(1)(B) of the Act and 19 CFR 
351.205(d), where appropriate, Commerce will instruct CBP to require a 
cash deposit equal to the estimated weighted-average dumping margin or 
the estimated all-others rate, as follows: (1) The cash deposit rate 
for the respondent listed above will be equal to the company-specific 
estimated weighted-average dumping margins determined in this 
preliminary determination; (2) if the exporter is not a respondent 
identified above, but the producer is, then the cash deposit rate will 
be equal to the company-specific estimated weighted-average dumping 
margin established for that producer of the subject merchandise; and 
(3) the cash deposit rate for all other producers and exporters will be 
equal to the all-others estimated weighted-average dumping margin. 
These suspension of liquidation instructions will remain in effect 
until further notice.

Disclosure

    Commerce intends to disclose its calculations and analysis 
performed to interested parties in this preliminary determination 
within five days of any public announcement or, if there is no public 
announcement, within five days of the date of publication of this 
notice in accordance with 19 CFR 351.224(b).

Verification

    Commerce is currently unable to conduct on-site verification of the 
information relied upon in making its preliminary determination in this 
investigation. Accordingly, we intend to take additional steps in lieu 
of on-site verification. Commerce will notify interested parties of any 
additional documentation or information required.

Public Comment

    Case briefs or other written comments may be submitted to the 
Assistant Secretary for Enforcement and Compliance. A timeline for the 
submission of case briefs and written comments on non-scope issues will 
be notified to interested parties at a later date. Rebuttal briefs, 
limited to issues raised in case briefs, may be submitted no later than 
seven days after the deadline date for case briefs.\10\ Commerce has 
modified certain of its requirements for serving documents containing 
business proprietary information until further notice.\11\ Pursuant to 
19 CFR 351.309(c)(2) and (d)(2), parties who submit case briefs or 
rebuttal briefs in this investigation are encouraged to submit with 
each argument: (1) A statement of the issue; (2) a brief summary of the 
argument; and (3) a table of authorities.
---------------------------------------------------------------------------

    \10\ See 19 CFR 351.309; see also 19 CFR 351.303 (for general 
filing requirements).
    \11\ See Temporary Rule Modifying AD/CVD Service Requirements 
Due to COVID-19; Extension of Effective Period, 85 FR 41363 (July 
10, 2020).
---------------------------------------------------------------------------

    Pursuant to 19 CFR 351.310(c), interested parties who wish to 
request a hearing, limited to issues raised in the case and rebuttal 
briefs, must submit a written request to the Assistant Secretary for 
Enforcement and Compliance, U.S. Department of Commerce, within 30 days 
after the date of publication of this notice. Requests should contain 
the party's name, address, and telephone number, the number of 
participants, whether any participant is a foreign national, and a list 
of the issues to be discussed. If a request for a hearing is made, 
Commerce intends to hold the hearing at a time and date to be 
determined. Parties should confirm by telephone the date, time, and 
location of the hearing two days before the scheduled date.
    Postponement of Final Determination and Extension of Provisional 
Measures
    Section 735(a)(2) of the Act provides that a final determination 
may be postponed until not later than 135 days after the date of the 
publication of the preliminary determination if, in the event of an 
affirmative preliminary determination, a request for such postponement 
is made by exporters who account for a significant proportion of 
exports of the subject merchandise, or in the event of a negative 
preliminary determination, a request for such postponement is made by 
the petitioner. Section 351.210(e)(2) of Commerce's regulations 
requires that a request by exporters for postponement of the final 
determination be accompanied by a request for extension of provisional

[[Page 65342]]

measures from a four-month period to a period not more than six months 
in duration.
    On September 18, 2020, pursuant to 19 CFR 351.210(e), OARC 
requested that Commerce postpone the final determination and that 
provisional measures be extended to a period not to exceed six 
months.\12\ In accordance with section 735(a)(2)(A) of the Act and 19 
CFR 351.210(b)(2)(ii), because: (1) The preliminary determination is 
affirmative; (2) the requesting exporters account for a significant 
proportion of exports of the subject merchandise; and (3) no compelling 
reasons for denial exist, Commerce is postponing the final 
determination and extending the provisional measures from a four-month 
period to a period not greater than six months. Accordingly, Commerce 
will make its final determination no later than 135 days after the date 
of publication of this preliminary determination, pursuant to section 
735(a)(2) of the Act.
---------------------------------------------------------------------------

    \12\ See OARC's Letter, ``Common Alloy Aluminum Sheet from Oman: 
Request for Postponement of Final Determination and Provisional 
Measures Period,'' dated September 18, 2020.
---------------------------------------------------------------------------

International Trade Commission Notification

    In accordance with section 733(f) of the Act, Commerce will notify 
the International Trade Commission (ITC) of its preliminary 
determination. If the final determination is affirmative, then the ITC 
will determine before the later of 120 days after the date of this 
preliminary determination or 45 days after the final determination 
whether imports of aluminum sheet from Oman are materially injuring, or 
threaten material injury to, the U.S. industry.

Notification to Interested Parties

    This determination is issued and published in accordance with 
sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).

    Dated: October 6, 2020.
Jeffrey I. Kessler,
Assistant Secretary for Enforcement and Compliance.

Appendix I--Scope of the Investigation

    The products covered by this investigation are common alloy 
aluminum sheet, which is a flat-rolled aluminum product having a 
thickness of 6.3 mm or less, but greater than 0.2 mm, in coils or 
cut-to-length, regardless of width. Common alloy sheet within the 
scope of this investigation includes both not clad aluminum sheet, 
as well as multi-alloy, clad aluminum sheet. With respect to not 
clad aluminum sheet, common alloy sheet is manufactured from a 1XXX-
, 3XXX-, or 5XXX-series alloy as designated by the Aluminum 
Association. With respect to multi-alloy, clad aluminum sheet, 
common alloy sheet is produced from a 3XXX-series core, to which 
cladding layers are applied to either one or both sides of the core. 
The use of a proprietary alloy or non-proprietary alloy that is not 
specifically registered by the Aluminum Association as a discrete 
1XXX-, 3XXX-, or 5XXX-series alloy, but that otherwise has a 
chemistry that is consistent with these designations, does not 
remove an otherwise in-scope product from the scope.
    Common alloy sheet may be made to ASTM specification B209-14 but 
can also be made to other specifications. Regardless of 
specification, however, all common alloy sheet meeting the scope 
description is included in the scope. Subject merchandise includes 
common alloy sheet that has been further processed in a third 
country, including but not limited to annealing, tempering, 
painting, varnishing, trimming, cutting, punching, and/or slitting, 
or any other processing that would not otherwise remove the 
merchandise from the scope of this investigation if performed in the 
country of manufacture of the common alloy sheet.
    Excluded from the scope of this investigation is aluminum can 
stock, which is suitable for use in the manufacture of aluminum 
beverage cans, lids of such cans, or tabs used to open such cans. 
Aluminum can stock is produced to gauges that range from 0.200 mm to 
0.292 mm, and has an H-19, H-41, H-48, H-39, or H-391 temper. In 
addition, aluminum can stock has a lubricant applied to the flat 
surfaces of the can stock to facilitate its movement through 
machines used in the manufacture of beverage cans. Aluminum can 
stock is properly classified under Harmonized Tariff Schedule of the 
United States (HTSUS) subheadings 7606.12.3045 and 7606.12.3055.
    Where the nominal and actual measurements vary, a product is 
within the scope if application of either the nominal or actual 
measurement would place it within the scope based on the definitions 
set for the above.
    Common alloy sheet is currently classifiable under HTSUS 
subheadings 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000, 
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095. Further, 
merchandise that falls within the scope of this investigation may 
also be entered into the United States under HTSUS subheadings 
7606.11.3030, 7606.12.3015, 7606.12.3025, 7606.12.3035, 
7606.12.3091, 7606.91.3055, 7606.91.6055, 7606.92.3025, 
7606.92.6055, 7607.11.9090. Although the HTSUS subheadings are 
provided for convenience and customs purposes, the written 
description of the scope of this investigation is dispositive.

Appendix II--List of Topics Discussed in the Preliminary Decision 
Memorandum

I. Summary
II. Background
III. Period of Investigation
IV. Scope of Investigation
V. Scope Comments
VI. Affiliation
VII. Application of Facts Available and Use of Adverse Inference
VIII. Preliminary Negative Determination of Critical Circumstances
IX. Discussion of the Methodology
X. Currency Conversion
XI. Recommendation

[FR Doc. 2020-22805 Filed 10-14-20; 8:45 am]
BILLING CODE 3510-DS-P