[Federal Register Volume 85, Number 200 (Thursday, October 15, 2020)]
[Notices]
[Pages 65351-65354]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-22802]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-791-825]


Common Alloy Aluminum Sheet From South Africa: Preliminary 
Affirmative Determination of Sales at Less Than Fair Value, 
Postponement of Final Determination, and Extension of Provisional 
Measures

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: The Department of Commerce (Commerce) preliminarily determines 
that common alloy aluminum sheet (aluminum sheet) from South Africa is 
being, or is likely to be, sold in the United States at less than fair 
value (LTFV). The period of investigation is January 1, 2019 through 
December 31, 2019. Interested parties are invited to comment on this 
preliminary determination.

DATES: Applicable October 15, 2020.

FOR FURTHER INFORMATION CONTACT: Laurel LaCivita or Brendan Quinn, AD/
CVD Operations, Office III, Enforcement and Compliance, International 
Trade Administration, U.S. Department of Commerce, 1401 Constitution 
Avenue NW, Washington, DC 20230; telephone: (202) 482-4243 or (202) 
482-5848, respectively.

SUPPLEMENTARY INFORMATION:

Background

    This preliminary determination is made in accordance with section 
733(b) of the Tariff Act of 1930, as amended (the Act). Commerce 
published the notice of initiation of this investigation on April 7, 
2020.\1\ On July 29, 2020, Commerce postponed the preliminary 
determination of this investigation, and the revised deadline is now 
October 6, 2020.\2\ For a complete description of the events that 
followed the initiation of this investigation, see the Preliminary 
Decision Memorandum.\3\ A list of topics

[[Page 65352]]

included in the Preliminary Decision Memorandum is included as Appendix 
II to this notice. The Preliminary Decision Memorandum is a public 
document and is on file electronically via Enforcement and Compliance's 
Antidumping and Countervailing Duty Centralized Electronic Service 
System (ACCESS). ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Preliminary 
Decision Memorandum can be accessed directly at http://enforcement.trade.gov/frn/. The signed and the electronic versions of 
the Preliminary Decision Memorandum are identical in content.
---------------------------------------------------------------------------

    \1\ See Common Alloy Aluminum Sheet from Bahrain, Brazil, 
Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, Republic 
of Korea, Oman, Romania, Serbia, Slovenia, South Africa, Spain, 
Taiwan and the Republic of Turkey: Initiation of Less-Than-FairValue 
Investigations, 85 FR 19444 (April 7, 2020) (Initiation Notice).
    \2\ Common Alloy Aluminum Sheet from Bahrain, Brazil, Croatia, 
Egypt, Germany, Greece, India, Indonesia, Italy, Republic of Korea, 
Oman, Romania, Serbia, Slovenia, South Africa, Spain, Taiwan and the 
Republic of Turkey: Postponement of Preliminary Determinations in 
the Less-Than-Fair-Value Investigations, 85 FR 45576 (July 29, 
2020).
    \3\ See Memorandum, ``Decision Memorandum for the Preliminary 
Affirmative Determination in the Less-Than-Fair-Value Investigation 
of Common Alloy Aluminum Sheet from South Africa,'' dated 
concurrently with, and hereby adopted by this notice (Preliminary 
Decision Memorandum).
---------------------------------------------------------------------------

Scope of the Investigation

    The products covered by this investigation are common alloy 
aluminum sheet from South Africa. For a complete description of the 
scope of this investigation, see Appendix I.

Scope Comments

    In accordance with the preamble to Commerce's regulations,\4\ the 
Initiation Notice set aside a period of time for parties to raise 
issues regarding product coverage (i.e., scope).\5\ Certain interested 
parties commented on the scope of the investigation as it appeared in 
the Initiation Notice. For a summary of the product coverage comments 
and rebuttal responses submitted to the record for this investigation, 
and accompanying discussion and analysis of all comments timely 
received, see the Preliminary Scope Decision Memorandum.\6\ As 
discussed herein, Commerce is preliminarily modifying the scope 
language as it appeared in the Initiation Notice. See the revised scope 
in Appendix I to this notice. The Preliminary Scope Decision Memorandum 
establishes the deadline to submit scope case briefs. There will be no 
further opportunity for comments on scope-related issues.\7\
---------------------------------------------------------------------------

    \4\ See Antidumping Duties; Countervailing Duties, Final Rule, 
62 FR 27296, 27323 (May 19, 1997).
    \5\ See Initiation Notice.
    \6\ See Memorandum, ``Common Alloy Aluminum Sheet from Bahrain, 
Brazil, Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, 
Republic of Korea, Oman, Romania, Serbia, Slovenia, South Africa, 
Spain, Taiwan, and Turkey: Scope Comments Decision Memorandum for 
the Preliminary Determinations,'' dated October 6, 2020, 
(Preliminary Scope Decision Memorandum).
    \7\ Case briefs, other written comments, and rebuttal briefs 
submitted in response to this preliminary LTFV determination should 
not include scope-related issues. See Preliminary Scope Decision 
Memorandum; see also ``Public Comment'' section of this notice.
---------------------------------------------------------------------------

Methodology

    Commerce is conducting this investigation in accordance with 
section 731 of the Act. Commerce has calculated export prices in 
accordance with section 772(a) of the Act. Constructed export prices 
have been calculated in accordance with section 772(b) of the Act. 
Normal value (NV) is calculated in accordance with section 773 of the 
Act. For a full description of the methodology underlying the 
preliminary determination, see the Preliminary Decision Memorandum.

All-Others Rate

    Section 733(d)(1)(A)(ii) of the Act provides that in the 
preliminary determination Commerce shall determine an estimated all-
others rate for all exporters and producers not individually examined. 
Pursuant to section 735(c)(5)(A) of the Act, this rate shall be an 
amount equal to the weighted average of the estimated weighted-average 
dumping margins established for exporters and producers individually 
investigated, excluding any zero and de minimis margins, and any 
margins determined entirely under section 776 of the Act.
    Commerce calculated an individual estimated weighted-average 
dumping margin for Hulamin Operations (Pty) Ltd. (Hulamin Operations), 
the only individually examined exporter/producer in this investigation. 
Because the only individually calculated dumping margin is not zero, de 
minimis or based entirely on facts otherwise available, the estimated 
weighted-average dumping margin calculated for Hulamin Operations is 
the margin assigned to all other producers and exporters, pursuant to 
section 735(c)(5)(A) of the Act.

Preliminary Determination

    Commerce preliminarily determines that the following estimated 
weighted-average dumping margins exist:

------------------------------------------------------------------------
                                                               Estimated
                                                               weighted-
                                                                average
                      Exporter/producer                         dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
Hulamin Operations (Pty) Ltd................................    \8\ 8.98
All Others..................................................        8.98
------------------------------------------------------------------------

Suspension of Liquidation

    In accordance with section 733(d)(2) of the Act, Commerce will 
direct U.S. Customs and Border Protection (CBP) to suspend liquidation 
of entries of subject merchandise, as described in Appendix I, entered, 
or withdrawn from warehouse, for consumption on or after the date of 
publication of this notice in the Federal Register.
---------------------------------------------------------------------------

    \8\ See Memorandum, ``Antidumping Duty Investigation of Common 
Alloy Aluminum Sheet from South Africa: Analysis of the Preliminary 
Determination Margin Calculations for Hulamin Operations (Pty) 
Ltd.,'' dated concurrently with this notice.
---------------------------------------------------------------------------

    Further, pursuant to section 733(d)(1)(B) of the Act and 19 CFR 
351.205(d) Commerce will instruct CBP to require a cash deposit equal 
to the estimated weighted-average dumping margin or the estimated all-
others rate, as follows: (1) The cash deposit rate for the respondent 
listed above will be equal to the company-specific estimated weighted-
average dumping margin determined in this preliminary determination; 
(2) if the exporter is not a respondent identified above, but the 
producer is, then the cash deposit rate will be equal to the company-
specific estimated weighted-average dumping margin established for that 
producer of the subject merchandise; and (3) the cash deposit rate for 
all other producers and exporters will be equal to the all-others 
estimated weighted-average dumping margin. These suspension of 
liquidation instructions will remain in effect until further notice.

Disclosure

    Commerce intends to disclose its calculations and analysis 
performed to interested parties in this preliminary determination 
within five days of any public announcement or, if there is no public 
announcement, within five days of the date of publication of this 
notice in accordance with 19 CFR 351.224(b).

Verification

    Commerce is currently unable to conduct on-site verification of the 
information relied upon in making its final determination in this 
investigation. Accordingly, we intend to take additional steps in lieu 
of on-site verification. Commerce will notify interested parties of any 
additional documentation or information required.

Public Comment

    Case briefs or other written comments on non-scope issues may be 
submitted to the Assistant Secretary for Enforcement and Compliance. 
Interested parties will be notified of the timeline for the submission 
of case briefs and written comments at a later date. Rebuttal briefs, 
limited to issues raised in these case briefs, may be submitted no 
later than seven days after the deadline date for case briefs.\9\ Note 
that Commerce has modified certain of

[[Page 65353]]

its requirements for serving documents containing business proprietary 
information until further notice.\10\ Pursuant to 19 CFR 351.309(c)(2) 
and (d)(2), parties who submit case briefs or rebuttal briefs in this 
investigation are encouraged to submit with each argument: (1) A 
statement of the issue; (2) a brief summary of the argument; and (3) a 
table of authorities.
---------------------------------------------------------------------------

    \9\ See 19 CFR 351.309; see also 19 CFR 351.303 (for general 
filing requirements).
    \10\ See Temporary Rule Modifying AD/CVD Service Requirements 
Due to COVID-19, 85 FR 17006 (March 26, 2020); see also Temporary 
Rule Modifying AD/CVD Service Requirements Due to COVID-19; 
Extension of Effective Period, 85 FR 41363 (July 10, 2020).
---------------------------------------------------------------------------

    Pursuant to 19 CFR 351.310(c), interested parties who wish to 
request a hearing, limited to issues raised in the case and rebuttal 
briefs, must submit a written request to the Assistant Secretary for 
Enforcement and Compliance, U.S. Department of Commerce, within 30 days 
after the date of publication of this notice. Requests should contain 
the party's name, address, and telephone number, the number of 
participants, whether any participant is a foreign national, and a list 
of the issues to be discussed. If a request for a hearing is made, 
Commerce intends to hold the hearing at a time and date to be 
determined. Parties should confirm by telephone the date, time, and 
location of the hearing two days before the scheduled date.

Postponement of Final Determination and Extension of Provisional 
Measures

    Section 735(a)(2) of the Act provides that a final determination 
may be postponed until not later than 135 days after the date of the 
publication of the preliminary determination if, in the event of an 
affirmative preliminary determination, a request for such postponement 
is made by exporters who account for a significant proportion of 
exports of the subject merchandise, or in the event of a negative 
preliminary determination, a request for such postponement is made by 
the petitioner. Section 351.210(e)(2) of Commerce's regulations 
requires that a request by exporters for postponement of the final 
determination be accompanied by a request for extension of provisional 
measures from a four-month period to a period not more than six months 
in duration.
    On September 9, 2020, pursuant to 19 CFR 351.210(e), Hulamin 
Operations requested that Commerce postpone the final determination and 
that provisional measures be extended to a period not to exceed six 
months.\11\ In accordance with section 735(a)(2)(A) of the Act and 19 
CFR 351.210(b)(2)(ii), because: (1) The preliminary determination is 
affirmative; (2) the requesting exporter accounts for a significant 
proportion of exports of the subject merchandise; and (3) no compelling 
reasons for denial exist, Commerce is postponing the final 
determination and extending the provisional measures from a four-month 
period to a period not greater than six months. Accordingly, Commerce 
will make its final determination no later than 135 days after the date 
of publication of this preliminary determination, pursuant to section 
735(a)(2) of the Act.
---------------------------------------------------------------------------

    \11\ See Hulamin Operations' Letter, ``Common Alloy Aluminum 
Sheet from South Africa: Request to Postpone Final Determination and 
to Extend Provisional Measures,'' dated September 9, 2020.
---------------------------------------------------------------------------

International Trade Commission Notification

    In accordance with section 733(f) of the Act, Commerce will notify 
the International Trade Commission (ITC) of its preliminary 
determination. If the final determination is affirmative, then the ITC 
will determine before the later of 120 days after the date of this 
preliminary determination or 45 days after the final determination 
whether imports of aluminum sheet from South Africa are materially 
injuring, or threaten material injury to, the U.S. industry.

Notification to Interested Parties

    This determination is issued and published in accordance with 
sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).

    Dated: October 6, 2020.
Jeffrey I. Kessler,
Assistant Secretary for Enforcement and Compliance.

Appendix I

Scope of the Investigation

    The products covered by this investigation are common alloy 
aluminum sheet, which is a flat-rolled aluminum product having a 
thickness of 6.3 mm or less, but greater than 0.2 mm, in coils or 
cut-to-length, regardless of width. Common alloy sheet within the 
scope of this investigation includes both not clad aluminum sheet, 
as well as multi-alloy, clad aluminum sheet. With respect to not 
clad aluminum sheet, common alloy sheet is manufactured from a 1XXX-
, 3XXX-, or 5XXX-series alloy as designated by the Aluminum 
Association. With respect to multi-alloy, clad aluminum sheet, 
common alloy sheet is produced from a 3XXX-series core, to which 
cladding layers are applied to either one or both sides of the core. 
The use of a proprietary alloy or non-proprietary alloy that is not 
specifically registered by the Aluminum Association as a discrete 
1XXX-, 3XXX-, or 5XXX-series alloy, but that otherwise has a 
chemistry that is consistent with these designations, does not 
remove an otherwise in-scope product from the scope.
    Common alloy sheet may be made to ASTM specification B209-14 but 
can also be made to other specifications. Regardless of 
specification, however, all common alloy sheet meeting the scope 
description is included in the scope. Subject merchandise includes 
common alloy sheet that has been further processed in a third 
country, including but not limited to annealing, tempering, 
painting, varnishing, trimming, cutting, punching, and/or slitting, 
or any other processing that would not otherwise remove the 
merchandise from the scope of this investigation if performed in the 
country of manufacture of the common alloy sheet.
    Excluded from the scope of this investigation is aluminum can 
stock, which is suitable for use in the manufacture of aluminum 
beverage cans, lids of such cans, or tabs used to open such cans. 
Aluminum can stock is produced to gauges that range from 0.200 mm to 
0.292 mm, and has an H-19, H-41, H-48, H-39, or H-391 temper. In 
addition, aluminum can stock has a lubricant applied to the flat 
surfaces of the can stock to facilitate its movement through 
machines used in the manufacture of beverage cans. Aluminum can 
stock is properly classified under Harmonized Tariff Schedule of the 
United States (HTSUS) subheadings 7606.12.3045 and 7606.12.3055.
    Where the nominal and actual measurements vary, a product is 
within the scope if application of either the nominal or actual 
measurement would place it within the scope based on the definitions 
set for the above.
    Common alloy sheet is currently classifiable under HTSUS 
subheadings 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000, 
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095. Further, 
merchandise that falls within the scope of this investigation may 
also be entered into the United States under HTSUS subheadings 
7606.11.3030, 7606.12.3015, 7606.12.3025, 7606.12.3035, 
7606.12.3091, 7606.91.3055, 7606.91.6055, 7606.92.3025, 
7606.92.6055, 7607.11.9090. Although the HTSUS subheadings are 
provided for convenience and customs purposes, the written 
description of the scope of this investigation is dispositive.

Appendix II

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary
II. Background
III. Period of Investigation
IV. Scope of Investigation
V. Scope Comments
VI. Discussion of the Methodology
    A. Comparisons to Normal Value
    1. Determination of Comparison Method
    2. Results of the Differential Pricing Analysis
    B. Product Comparisons
    C. Date of Sale
    D. Export Price
    E. Constructed Export Price
    F. Normal Value
    1. Comparison Market Viability
    2. Level of Trade
    3. Cost of Production Analysis
    a. Calculation of COP

[[Page 65354]]

    b. Test of Comparison Market Sales Prices
    c. Results of the COP Test
    G. Calculation of NV Based on Comparison-Market Prices
VII. Currency Conversion
VIII. Recommendation

[FR Doc. 2020-22802 Filed 10-14-20; 8:45 am]
BILLING CODE 3510-DS-P