[Federal Register Volume 85, Number 61 (Monday, March 30, 2020)]
[Notices]
[Pages 17536-17538]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-06548]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[C-533-892]


Forged Steel Fittings From India: Preliminary Affirmative 
Countervailing Duty Determination, and Alignment of Final Determination 
With Final Antidumping Duty Determination

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: The Department of Commerce (Commerce) preliminarily determines 
that countervailable subsidies are being provided to producers and 
exporters of forged steel fittings from India for the period of 
investigation January 1, 2018 through December 31, 2018. Interested 
parties are invited to comment on this preliminary determination.

DATES: Applicable March 30, 2020.

FOR FURTHER INFORMATION CONTACT: Lauren Caserta, AD/CVD Operations, 
Office VII, Enforcement and Compliance, International Trade 
Administration, U.S. Department of Commerce, 1401 Constitution Avenue 
NW, Washington, DC 20230; telephone: (202) 482-4737.

SUPPLEMENTARY INFORMATION:

Background

    This preliminary determination is made in accordance with section 
703(b) of the Tariff Act of 1930, as amended (the Act). Commerce 
published the notice of initiation of this investigation on November 
21, 2020.\1\ On January 10, 2020, Commerce postponed the preliminary 
determination of this investigation and the revised deadline is now 
March 23, 2020.\2\ For a complete description of the events that 
followed the initiation of this investigation, see the Preliminary 
Decision Memorandum.\3\ A list of topics discussed in the Preliminary 
Decision Memorandum is included as Appendix II to this notice. The 
Preliminary Decision Memorandum is a public document and is on file 
electronically via Enforcement and Compliance's Antidumping and 
Countervailing Duty Centralized Electronic Service System (ACCESS). 
ACCESS is available to registered users at https://access.trade.gov, 
and is available to all parties in the Central Records Unit, room B8024 
of the main Commerce building. In addition, a complete version of the 
Preliminary Decision Memorandum can be accessed directly at http://enforcement.trade.gov/frn/. The signed and electronic versions of the 
Preliminary Decision Memorandum are identical in content.
---------------------------------------------------------------------------

    \1\ See Forged Steel Fittings from India and the Republic of 
Korea: Initiation of Countervailing Duty Investigation, 84 FR 64270 
(November 21, 2019) (Initiation Notice).
    \2\ See Forged Steel Fittings from India: Postponement of 
Preliminary Determination in the Countervailing Duty Investigation, 
85 FR 1300 (January 10, 2020).
    \3\ See Memorandum, ``Decision Memorandum for the Preliminary 
Determination in the Countervailing Duty Investigation of Forged 
Steel Fittings from India,'' dated concurrently with, and hereby 
adopted by, this notice (Preliminary Decision Memorandum).
---------------------------------------------------------------------------

Scope of the Investigation

    The products covered by this investigation are forged steel 
fittings from India. For a complete description of the scope of this 
investigation, see Appendix I.

Scope Comments

    In accordance with the Preamble to Commerce's regulations,\4\ the 
Initiation Notice set aside a period of time for parties to raise 
issues regarding product coverage (i.e., scope).\5\ Certain interested 
parties commented on the scope of the investigation as it appeared in 
the Initiation Notice. For a summary of the product coverage comments 
submitted to the record for this preliminary determination, and 
accompanying discussion and analysis of all comments timely received, 
see the Preliminary Decision Memorandum. Commerce is preliminarily 
modifying the scope language as it appeared in the Initiation Notice. 
See revised scope in Appendix I.
---------------------------------------------------------------------------

    \4\ See Antidumping Duties; Countervailing Duties, Final Rule, 
62 FR 27296, 27323 (May 19, 1997) (Preamble).
    \5\ See Initiation Notice.
---------------------------------------------------------------------------

Methodology

    Commerce is conducting this investigation in accordance with 
section 701 of the Act. For each of the subsidy programs found 
countervailable, Commerce preliminarily determines that there is a 
subsidy, i.e., a financial contribution by an ``authority'' that gives 
rise to a benefit to the recipient, and that the subsidy is 
specific.\6\
---------------------------------------------------------------------------

    \6\ See sections 771(5)(B) and (D) of the Act regarding 
financial contribution; section 771(5)(E) of the Act regarding 
benefit; and section 771(5A) of the Act regarding specificity.
---------------------------------------------------------------------------

Alignment

    As noted in the Preliminary Decision Memorandum, in accordance with 
section 705(a)(1) of the Act and 19 CFR 351.210(b)(4), Commerce is 
aligning the final CVD determination in this investigation with the 
final determination in the companion AD investigation of forged steel 
fittings from India based on a request made by the petitioner.\7\ 
Consequently, the final CVD determination will be issued on the same 
date as the final AD determination, which is currently scheduled no 
later than August 3, 2020, unless postponed.\8\
---------------------------------------------------------------------------

    \7\ See Petitioners' Letter, ``Forged Steel Fittings from India: 
Request for Alignment,'' dated March 5, 2020.
    \8\ See Forged Steel Fittings from India and the Republic of 
Korea: Postponement of Preliminary Determinations in the Less-Than-
Fair-Value Investigations, 85 FR 11965 (February 28, 2020).
---------------------------------------------------------------------------

All-Others Rate

    Sections 703(d) and 705(c)(5)(A) of the Act provide that in the 
preliminary determination, Commerce shall determine an estimated all-
others rate for companies not individually examined. This rate shall be 
an amount equal to the weighted average of the estimated subsidy rates 
established for those companies individually examined, excluding any 
zero and de minimis rates and any rates based entirely under section 
776 of the Act.
    In this investigation, Commerce preliminarily calculated a rate for 
Shakti, the only participating respondent. The only rate that is not 
zero, de minimis or based entirely on facts otherwise available is the 
rate calculated for Shakti. Consequently, the rate calculated for 
Shakti is also assigned as the rate for all other producers and 
exporters.

Preliminary Determination

    Commerce preliminarily determines that the following estimated 
countervailable subsidy rates exist:

[[Page 17537]]



------------------------------------------------------------------------
                                                           Subsidy  rate
                         Company                            Ad Valorem
------------------------------------------------------------------------
Shakti Forge Industries Pvt. Ltd. and Shakti Forge                 2.65%
 (collectively, Shakti).................................
Nikoo Forge Pvt. Ltd., Pan International, Patton                 284.91%
 International Limited, Sage Metals Limited, Kirtanlal
 Steel Private Limited, Disha Auto Components Private
 Limited, Dynamic Flow Products, Sara Sae Private
 Limited, and Parveen Industries Private Limited........
All Others..............................................           2.65%
------------------------------------------------------------------------

Suspension of Liquidation

    In accordance with section 703(d)(1)(B) and (d)(2) of the Act, 
Commerce will direct U.S. Customs and Border Protection (CBP) to 
suspend liquidation of entries of subject merchandise as described in 
the scope of the investigation section entered, or withdrawn from 
warehouse, for consumption on or after the date of publication of this 
notice in the Federal Register. Further, pursuant to 19 CFR 351.205(d), 
Commerce will instruct CBP to require a cash deposit equal to the rates 
indicated above.

Disclosure

    Commerce intends to disclose its calculations and analysis 
performed to interested parties in this preliminary determination 
within five days of its public announcement, or if there is no public 
announcement, within five days of the date of this notice in accordance 
with 19 CFR 351.224(b).

Verification

    As provided in section 782(i)(l) of the Act, Commerce intends to 
verify the information relied upon in making its final determination.

Public Comment

    Case briefs or other written comments may be submitted to the 
Assistant Secretary for Enforcement and Compliance no later than seven 
days after the date on which the last verification report is issued in 
this investigation. Rebuttal briefs, limited to issues raised in case 
briefs, may be submitted no later than five days after the deadline 
date for case briefs.\9\ Pursuant to 19 CFR 351.309(c)(2) and (d)(2), 
parties who submit case briefs or rebuttal briefs in this investigation 
are encouraged to submit with each argument: (1) A statement of the 
issue; (2) a brief summary of the argument; and (3) a table of 
authorities.
---------------------------------------------------------------------------

    \9\ See 19 CFR 351.309; see also 19 CFR 351.303 (for general 
filing requirements).
---------------------------------------------------------------------------

    Pursuant to 19 CFR 351.310(c), interested parties who wish to 
request a hearing, limited to issues raised in the case and rebuttal 
briefs, must submit a written request to the Assistant Secretary for 
Enforcement and Compliance, U.S. Department of Commerce within 30 days 
after the date of publication of this notice. Requests should contain 
the party's name, address, and telephone number, the number of 
participants, whether any participant is a foreign national, and a list 
of the issues to be discussed. If a request for a hearing is made, 
Commerce intends to hold the hearing at the U.S. Department of 
Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, at a time 
and date to be determined. Parties should confirm by telephone the 
date, time, and location of the hearing two days before the scheduled 
date.

International Trade Commission Notification

    In accordance with section 703(f) of the Act, Commerce will notify 
the International Trade Commission (ITC) of its determination. If the 
final determination is affirmative, the ITC will determine before the 
later of 120 days after the date of this preliminary determination or 
45 days after the final determination whether these imports are 
materially injuring, or threaten material injury to, the U.S. industry.

Notification to Interested Parties

    This determination is issued and published pursuant to sections 
703(f) and 777(i) of the Act and 19 CFR 351.205(c).

    Dated: March 23, 2020.
Jeffrey I. Kessler,
Assistant Secretary for Enforcement and Compliance.

Appendix I

Scope of the Investigation

    The merchandise covered by this investigation is carbon and 
alloy forged steel fittings, whether unfinished (commonly known as 
blanks or rough forgings) or finished. Such fittings are made in a 
variety of shapes including, but not limited to, elbows, tees, 
crosses, laterals, couplings, reducers, caps, plugs, bushings, 
unions (including hammer unions), and outlets. Forged steel fittings 
are covered regardless of end finish, whether threaded, socket-weld 
or other end connections. The scope includes integrally reinforced 
forged branch outlet fittings, regardless of whether they have one 
or more ends that is a socket welding, threaded, butt welding end, 
or other end connections.
    While these fittings are generally manufactured to 
specifications ASME B16.11, MSS SP-79, MSS SP-83, MSS-SP-97, ASTM 
A105, ASTM A350 and ASTM A182, the scope is not limited to fittings 
made to these specifications.
    The term forged is an industry term used to describe a class of 
products included in applicable standards, and it does not reference 
an exclusive manufacturing process. Forged steel fittings are not 
manufactured from casings. Pursuant to the applicable standards, 
fittings may also be machined from bar stock or machined from 
seamless pipe and tube.
    All types of forged steel fittings are included in the scope 
regardless of nominal pipe size (which may or may not be expressed 
in inches of nominal pipe size), pressure class rating (expressed in 
pounds of pressure, e.g., 2,000 or 2M; 3,000 or 3M; 6,000 or 6M; 
9,000 or 9M), wall thickness, and whether or not heat treated.
    Excluded from this scope are all fittings entirely made of 
stainless steel. Also excluded are flanges, nipples, and all 
fittings that have a maximum pressure rating of 300 pounds per 
square inch/PSI or less.
    Also excluded from the scope are fittings certified or made to 
the following standards, so long as the fittings are not also 
manufactured to the specifications of ASME B16.11, MSS SP-79, MSS 
SP-83, MSS SP-97, ASTM A105, ASTM A350 and ASTM A182:
     American Petroleum Institute (API) 5CT, API 5L, or API 
11B;
     American Society of Mechanical Engineers (ASME) B16.9;
     Manufacturers Standardization Society (MSS) SP-75;
     Society of Automotive Engineering (SAE) J476, SAE J514, 
SAE J516, SAE J517, SAE J518, SAE J1026, SAE J1231, SAE J1453, SAE 
J1926, J2044 or SAE AS 35411;
     Hydraulic hose fittings (e.g., fittings used in high 
pressure water cleaning applications, in the manufacture of 
hydraulic engines, to connect rubber dispensing hoses to a 
dispensing nozzle or grease fitting) made to ISO 12151-1, 12151-2, 
12151-3, 12151-4, 12151-5, or 12151-6;
     Underwriter's Laboratories (UL) certified electrical 
conduit fittings;
     ASTM A153, A536, A576, or A865;
     Casing conductor connectors made to proprietary 
specifications;
     Machined steel parts (e.g., couplers) that are not 
certified to any specifications in this scope description and that 
are not for connecting steel pipes for distributing gas and liquids;
     Oil country tubular goods (OCTG) connectors (e.g., 
forged steel tubular connectors for API 5L pipes or OCTG for 
offshore oil and gas drilling and extraction);
     Military Specification (MIL) MIL-C-4109F and MIL-F-
3541; and
     International Organization for Standardization (ISO) 
ISO6150-B.
    To be excluded from the scope, products must have the 
appropriate standard or pressure markings and/or be accompanied by 
documentation showing product compliance to the applicable standard 
or pressure, e.g., ``API 5CT'' mark and/or a mill certification 
report.

[[Page 17538]]

    Subject carbon and alloy forged steel fittings are normally 
entered under Harmonized Tariff Schedule of the United States 
(HTSUS) 7307.92.3010, 7307.92.3030, 7307.92.9000, 7307.99.1000, 
7307.99.3000, 7307.99.5045, and 7307.99.5060. They may also be 
entered under HTSUS 7307.93.3010, 7307.93.3040, 7307.93.6000, 
7307.93.9010, 7307.93.9040, 7307.93.9060, and 7326.19.0010.
    The HTSUS subheadings and specifications are provided for 
convenience and customs purposes; the written description of the 
scope is dispositive.

Appendix II

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary
II. Background
III. Scope Comments
IV. Scope of the Investigation
V. Injury Test
VI. Alignment
VII. Subsidies Valuation
VIII. Benchmarks and Interest Rates
IX. Use of Facts Otherwise Available and Adverse Inferences
X. Analysis of Programs
XI. Calculation of the All-Others Rate
XII. ITC Notification
XIII. Verification
XIV. Disclosure and Public Comment
XV. Conclusion

[FR Doc. 2020-06548 Filed 3-27-20; 8:45 am]
 BILLING CODE 3510-DS-P