[Federal Register Volume 85, Number 57 (Tuesday, March 24, 2020)]
[Notices]
[Pages 16664-16673]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-06144]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2013-0012]


Modification to the List of Appropriate NRTL Program Test 
Standards and the Scopes of Recognition of Several NRTLs

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In this notice, OSHA announces the final decision to: (1) Add 
one new test standard to the Nationally Recognized Testing Laboratories 
(NRTL) Program's list of appropriate test standards; (2) delete or 
replace several test standards from the NRTL Program's list of 
appropriate test standards; and (3) update the scope of recognition of 
several NRTLs.

DATES: The actions contained in this notice will become effective on 
March 24, 2020.

FOR FURTHER INFORMATION CONTACT: Information regarding this notice is 
available from the following sources:
    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office 
of Communications; telephone: (202) 693-1999; email: 
[email protected].
    General and technical information: Contact Mr. Kevin Robinson, 
Director, Office of Technical Programs and Coordination Activities, 
Directorate of Technical Support and Emergency Management, Occupational 
Safety and Health Administration; telephone: (202) 693-2110 or email: 
[email protected]. OSHA's web page includes information about the 
NRTL Program (see http://www.osha.gov/dts/otpca/nrtl/index.html).

SUPPLEMENTARY INFORMATION:

I. Background

    The NRTL Program recognizes organizations that provide product-
safety testing and certification services to manufacturers. These 
organizations perform testing and certification for purposes of the 
program, to U.S. consensus-based product-safety test standards. The 
products covered by the NRTL Program consist of those items for which 
OSHA safety standards require ``certification'' by a NRTL. The 
requirements affect electrical products and 38 other types of products. 
OSHA does not develop or issue these test standards, but generally 
relies on standards development organizations (SDOs), which develop and 
maintain the standards using a method that provides input and 
consideration of views of industry groups, experts, users, consumers, 
governmental authorities and others having broad experience in the 
safety field involved.

Addition of New Test Standards to the NRTL List of Appropriate Test 
Standards

    Periodically, OSHA will add new test standards to the NRTL list of 
appropriate test standards following an evaluation of the test standard 
document. To qualify as an appropriate test standard, the agency 
evaluates the document to (1) verify it represents a product category 
for which OSHA requires certification by a NRTL, (2) verify the 
document represents an end product and not a component, and (3) verify 
the document defines safety test specifications (not installation or 
operational performance specifications). OSHA becomes aware of new test 
standards through various avenues. For example, OSHA may become aware 
of new test standards by: (1) Monitoring notifications issued by 
certain SDOs; (2) reviewing applications by NRTLs or applicants seeking 
recognition to include a new test standard in their scopes of 
recognition; and (3) obtaining notification from manufacturers, 
manufacturing organizations, government agencies, or other parties that 
a new test standard may be appropriate to add to the list of 
appropriate standards. OSHA may determine to include a new test 
standard in the list, for example, if the test standard is for a 
particular type of product that another test standard also covers, 
addresses a type of product that no standard previously covered, or is 
otherwise new to the NRTL Program.

SDO Deletion and Replacement of Test Standards

    The NRTL Program regulations require that appropriate test 
standards be maintained and current (29 CFR 1910.7(c)). A test standard 
withdrawn by a standards development organization is no longer 
considered an appropriate test standard (CPL 01-00-004, NRTL Program 
Policies, Procedures and Guidelines Directive, Chapter 2, IX). It is 
OSHA's policy to remove recognition of withdrawn test standards by 
issuing a correction notice in the Federal Register for all NRTLs

[[Page 16665]]

recognized for the withdrawn test standards. However, SDOs frequently 
will designate a replacement standard for withdrawn standards. OSHA 
will recognize a NRTL for an appropriate replacement test standard if 
the NRTL has the requisite testing and evaluation capability for the 
replacement test standard.
    One method that NRTLs may use to show such capability involves an 
analysis to determine whether any testing and evaluation requirements 
of existing test standards in a NRTL's scope are comparable (i.e., are 
completely or substantially identical) to the requirements in the 
replacement test standard. If OSHA's analysis shows the replacement 
test standard does not require additional or different technical 
capability than an existing test standard(s), and the replacement test 
standard is comparable to the existing test standard(s), then OSHA can 
add the replacement test standard to affected NRTLs' scopes of 
recognition. If OSHA's analysis shows the replacement test standard 
requires an additional or different technical capability, or the 
replacement test standard is not comparable to any existing test 
standards, each affected NRTL seeking to have OSHA add the replacement 
test standard to the NRTL's scope of recognition must provide 
information to OSHA that demonstrates technical capability.

Other Reasons for Removal of Test Standards From the NRTL List of 
Appropriate Test Standards

    OSHA may choose to remove a test standard from the NRTL Program's 
List of Appropriate Test Standards based on an internal review in which 
NRTL Program staff review the NRTL Program's List of Appropriate Test 
Standards to determine if the test standards conform to the definition 
of an appropriate test standard defined in NRTL Program regulations and 
policy. There are several reasons for removing a test standard based on 
this review. First, a document that provides the methodology for a 
single test is a test method rather than an appropriate test standard 
(29 CFR 1910.7(c)). As stated above, a test standard must specify the 
safety requirements for a specific type of product(s). A test method, 
however, is a specified technical procedure for performing a test, as 
such, a test method is not an appropriate test standard. While a NRTL 
may use a test method to determine if certain safety requirements are 
met, a test method is not itself a safety requirement for a specific 
product category.
    Second, a document that focuses primarily on usage, installation, 
or maintenance requirements would also not be considered an appropriate 
test standard (NRTL Program Policies, Procedures and Guidelines 
Directive, CPL-01-00-004, Chapter 2, Section VIII, B). In some cases, 
however, a document may also provide safety test specifications in 
addition to usage, installation, and maintenance requirements. In such 
cases, the document would be retained as an appropriate test standard 
based on the safety test specifications.
    Finally, a document may not be considered an appropriate test 
standard if the document covers products for which OSHA does not 
require testing and certification (NRTL Program Policies, Procedures 
and Guidelines Directive, CPL-01-00-004, Chapter 2, Section VIII, B). 
Similarly, a document that covers electrical product components would 
not be considered an appropriate test standard. These documents apply 
to types of components that have limitation(s) or condition(s) on their 
use, which are not appropriate for use as end-use products. These 
documents also specify that these types of components are for use only 
as part of an end-use product. NRTLs, however, evaluate such components 
only in the context of evaluating whether end-use products requiring 
NRTL approval are safe for use in the workplace. Testing such 
components alone would not indicate that the end-use products 
containing the components are safe for use. Accordingly, as a matter of 
policy, OSHA considers that documents covering such components are not 
appropriate test standards under the NRTL Program. OSHA notes, however, 
that it is not proposing to delete from NRTLs' scope of recognition any 
test standards covering end-use products that contain such 
components.\1\
---------------------------------------------------------------------------

    \1\ OSHA notes also that some types of devices covered by these 
documents, such as capacitors and transformers, may be end-use 
products themselves, and tested under other test standards 
applicable to such products. For example, the following test 
standard covers transformers that are end-use products: UL 1562 
Standard for Transformers, Distribution, Dry-Type--Over 600 Volts. 
OSHA is not proposing to delete such test standards from NRTLs' 
scopes of recognition.
---------------------------------------------------------------------------

    In addition, OSHA notes that, to conform to a test standard 
covering an end-use product, a NRTL must still determine that the 
components in the product comply with the components' specific test 
standards. In making this determination, NRTLs may test the components 
themselves, or accept the testing of a qualified testing organization 
that a given component conforms to the particular test standard. OSHA 
reviews each NRTL's procedures to determine which approach the NRTL 
will use to address components, and reviews the end-use product testing 
to verify the NRTL appropriately addresses that product's components.

Proposed Modification to the List of Appropriate NRTL Program Test 
Standards and the Scope of Recognition of Several NRTLs

    In an April 10, 2019 Federal Register notice (84 FR 14412, referred 
to in this notice as ``Proposed Modification,'' and available at 
www.regulations.gov under Docket ID OSHA-2013-0012-0011), OSHA 
proposed: Deleting several withdrawn and deleted test standards from 
the NRTL Program's list of appropriate test standards; incorporating 
into the NRTL Program's list of appropriate test standards replacement 
test standards for some of the withdrawn and deleted test standards; 
and updating the scope of recognition of several NRTLs. In response to 
this notice, two comments (OSHA-2013-0012-0023) and (OSHA-2013-0012-
0024) were received from the public after the comment period ended. The 
comments were not related to this Federal Register notice, and OSHA has 
not made any modifications to this notice based on these comments.
    OSHA further published a Federal Register notice regarding 
insulating links on March 14, 2019 (84 FR 9384) and announced the final 
decision on July 29, 2019 (84 FR 35887). This Federal Register notice 
addressed the issue raised in the comments within 84 FR 14412. 
Therefore the issue raised in the comments will not be addressed in 
this notice.

II. Final Decision To Add a New Test Standard to the NRTL Program's 
List of Appropriate Test Standards

    In this notice, OSHA announces the final decision to add one test 
standard, UL 61010-2-061, Electrical Equipment for Measurement, Control 
and Laboratory Use--Part 2-061: Particular Requirements for Laboratory 
Atomic Spectrometers with Thermal Atomization and Ionization to the 
NRTL Program's list of appropriate test standards. In the Proposed 
Modification, OSHA proposed replacing withdrawn standards with nine 
standards, eight of which are already included in the NRTL Program's 
list of appropriate test standards. The standard

[[Page 16666]]

OSHA will add to the NRTL Program's list of appropriate test standards 
is outlined below in Table 1 below:

   Table 1--Test Standard OSHA Is Adding to the NRTL Program's List of
                       Appropriate Test Standards
------------------------------------------------------------------------
         Test standard No.                   Test standard title
------------------------------------------------------------------------
UL 61010-2-061....................  Electrical Equipment for
                                     Measurement, Control and Laboratory
                                     Use--Part 2-061: Particular
                                     Requirements for Laboratory Atomic
                                     Spectrometers with Thermal
                                     Atomization and Ionization.
------------------------------------------------------------------------

II. Final Decision To Remove a Test Standard to the NRTL Program's List 
of Appropriate Test Standards

    In this notice, OSHA announces the final decision to delete twenty-
nine withdrawn and deleted test standards from the NRTL Program's List 
of Appropriate Test Standards. OSHA also incorporates into the NRTL 
Program's List of Appropriate Test Standards replacement test standards 
for some of the withdrawn and deleted test standards as described below 
in Table 2:

         Table 2--Test Standards OSHA Is Removing From NRTL Program's List of Appropriate Test Standards
----------------------------------------------------------------------------------------------------------------
                                                                                                 Replacement
     Deleted test standard        Test standard title           Reason for deletion              standard(s)
----------------------------------------------------------------------------------------------------------------
ANSI C37.44....................  Distribution Oil      Withdrawn...........................  None.
                                  Cutouts and Fuse
                                  Links.
IEEE C37.09....................  Standard Test         Withdrawn...........................  None.
                                  Procedure for High-
                                  Voltage Circuit
                                  Breakers Rated on a
                                  Symmetrical Current
                                  Basis.
IEEE C37.29....................  Low-Voltage AC Power  Withdrawn...........................  None.
                                  Circuit Protectors
                                  Used in Enclosures.
IEEE C37.45....................  Distribution          Withdrawn...........................  None.
                                  Enclosed Single-
                                  Pole Air Switches.
NEMA C37.52....................  Low-Voltage AC Power  Withdrawn...........................  None.
                                  Circuit Protectors
                                  Used in Enclosures--
                                  Test Procedures.
IEEE C37.53....................  High-Voltage Current  Withdrawn...........................  None.
                                  Motor-Starter
                                  Fuses--Conformance
                                  Test Procedures.
ISA 82.02.01...................  Electric and          Withdrawn...........................  None.
                                  Electronic Test,
                                  Measuring,
                                  Controlling and
                                  Related Equipment:
                                  General Requirement.
UL 1093........................  Halogenated Agent     Withdrawn...........................  None.
                                  Fire Extinguishers.
UL 1244........................  Electrical and        Withdrawn...........................  None.
                                  Electronic
                                  Measuring and
                                  Testing Equipment.
UL 1448........................  Electric Hedge        Withdrawn and replaced..............  UL 60745-2-15
                                  Trimmers.                                                   Particular
                                                                                              Requirements for
                                                                                              Hedge Trimmers.
ISA 60079-2....................  Explosive             Withdrawn and replaced..............  UL 60079-2
                                  Atmospheres--Part                                           Explosive
                                  2: Equipment                                                Atmospheres--Part
                                  Protection by                                               2: Protection by
                                  Pressurized                                                 Pressurized
                                  Enclosures ``p''.                                           Enclosures ``p''.
ISA 60079-5....................  Explosive             Withdrawn and replaced..............  UL 60079-5
                                  Atmospheres--Part                                           Explosive
                                  5: Equipment                                                Atmospheres--Part
                                  Protection by                                               5: Equipment
                                  Powder Filling                                              Protection by
                                  ``q''.                                                      Powder Filling
                                                                                              ``q''.
ISA 60079-18...................  Explosive             Withdrawn and replaced..............  UL 60079-18
                                  Atmospheres--Part                                           Explosive
                                  18: Equipment                                               Atmospheres--Part
                                  Protection by                                               18: Equipment
                                  Encapsulation ``m''.                                        Protection by
                                                                                              Encapsulation
                                                                                              ``m''.
ISA 60079-26...................  Explosive             Withdrawn and replaced..............  UL 60079-26
                                  Atmospheres--Part                                           Explosive
                                  26: Equipment for                                           Atmospheres--Part
                                  Use in Class I,                                             26: Equipment for
                                  Zone 0 Hazardous                                            Use in Class I,
                                  (Classified)                                                Zone 0 Hazardous
                                  Locations.                                                  (Classified)
                                                                                              Locations.
UL 745-1.......................  Portable Electric     Withdrawn...........................  None.
                                  Tools.
UL 745-2.......................  Particular            Withdrawn...........................  None.
                                  Requirements of
                                  Drills.
UL 745-2-3.....................  Particular            Withdrawn...........................  None.
                                  Requirements for
                                  Grinders, Polishers
                                  and Disk-Type
                                  Sanders.
UL 745-2-17....................  Particular            Withdrawn...........................  None.
                                  Requirements for
                                  Circular Saws and
                                  Circular Knives.
UL 745-2-36....................  Particular            Withdrawn...........................  None.
                                  Requirements for
                                  Hand Motor Tools.
UL 745-2-37....................  Particular            Withdrawn...........................  None.
                                  Requirements for
                                  Plate Jointers.
UL 61010A-1....................  Electrical Equipment  Withdrawn and replaced..............  UL 61010-1
                                  for Laboratory Use;                                         Electrical
                                  Part 1: General                                             Equipment for
                                  Requirements.                                               Measurement,
                                                                                              Control and
                                                                                              Laboratory Use;
                                                                                              Part 1: General
                                                                                              Requirements.
UL 61010A-2-010................  Electrical Equipment  Withdrawn and replaced..............  UL 61010-2-010
                                  for Laboratory Use;                                         Electrical
                                  Part 2: Particular                                          Equipment for
                                  Requirements for                                            Measurement,
                                  the Heating of                                              Control and
                                  Materials.                                                  Laboratory Use--
                                                                                              Part 2-010:
                                                                                              Particular
                                                                                              Requirements for
                                                                                              Laboratory
                                                                                              Equipment for the
                                                                                              Heating of
                                                                                              Materials.
UL 61010A-2-020................  Electrical Equipment  Withdrawn and replaced..............  UL 61010-2-020
                                  for Laboratory Use;                                         Electrical
                                  Part 2: Particular                                          Equipment for
                                  Requirements for                                            Measurement,
                                  Laboratory                                                  Control, and
                                  Centrifuges.                                                Laboratory Use--
                                                                                              Part 2-020:
                                                                                              Particular
                                                                                              Requirements for
                                                                                              Laboratory
                                                                                              Centrifuges.

[[Page 16667]]

 
UL 61010A-2-041................  Electrical Equipment  Withdrawn and replaced..............  UL 61010-1 (no
                                  for Laboratory Use:                                         direct
                                  Part 2: Particular                                          replacement).
                                  Requirements for
                                  Autoclaves Using
                                  Steam for the
                                  Treatment of
                                  Medical Materials
                                  for Laboratory
                                  Purposes.
UL 61010A-2-051................  Electrical Equipment  Withdrawn and replaced..............  UL 61010-2-051
                                  for Laboratory Use;                                         Electrical
                                  Part 2: Particular                                          Equipment for
                                  Requirements for                                            Measurement,
                                  Laboratory                                                  Control and
                                  Equipment Mixing                                            Laboratory Use--
                                  and Stirring.                                               Part 2-051:
                                                                                              Particular
                                                                                              Requirements for
                                                                                              Laboratory
                                                                                              Equipment for
                                                                                              Mixing and
                                                                                              Stirring.
UL 61010A-2-061................  Electrical Equipment  Withdrawn and replaced..............  UL 61010-2-061
                                  for Laboratory Use:                                         Electrical
                                  Part 2: Particular                                          Equipment for
                                  Requirements for                                            Measurement,
                                  Laboratory Atomic                                           Control and
                                  Spectrometers with                                          Laboratory Use--
                                  Thermal Atomization                                         Part 2-061:
                                  and Ionization.                                             Particular
                                                                                              Requirements for
                                                                                              Laboratory Atomic
                                                                                              Spectrometers with
                                                                                              Thermal
                                                                                              Atomization and
                                                                                              Ionization.
UL 61010B-1....................  Electrical Measuring  Withdrawn and replaced..............  UL 61010-1
                                  and Test Equipment;                                         Electrical
                                  Part 1: General                                             Equipment for
                                  Requirements.                                               Measurement,
                                                                                              Control and
                                                                                              Laboratory Use;
                                                                                              Part 1: General
                                                                                              Requirements.
UL 61010B-2-031................  Electrical Equipment  Withdrawn and replaced..............  UL 61010-1 (no
                                  for Measurement,                                            direct
                                  Control and                                                 replacement).
                                  Laboratory Use:
                                  Part 2: Particular
                                  Requirements for
                                  Hand-Held Probe
                                  Assemblies for
                                  Electrical
                                  Measurement and
                                  Test.
UL 61010C-1....................  Process Control       Withdrawn and replaced..............  UL 61010-1
                                  Equipment.                                                  Electrical
                                                                                              Equipment for
                                                                                              Measurement,
                                                                                              Control and
                                                                                              Laboratory Use;
                                                                                              Part 1: General
                                                                                              Requirements.
----------------------------------------------------------------------------------------------------------------

III. Final Decision To Modify Affected NRTLs' Scope of Recognition

    In this notice, OSHA announces the final decision to update the 
scope of recognition of several NRTLs. The tables in this section 
(Table 3 thru Table 10) list, for each affected NRTL, the test 
standard(s) that OSHA will delete from the scope of recognition and, 
when applicable, the test standard(s) that OSHA will incorporate into 
the scope of recognition to replace withdrawn (and deleted) test 
standards.

 Table 3--Test Standards OSHA Is Removing From the Scope of Recognition
                  of the Canadian Standards Association
------------------------------------------------------------------------
                                                      Replacement test
Test standard(s) being removed      Reason for        standard(s) (if
                                     removal            applicable)
------------------------------------------------------------------------
UL 61010A-2-020--Electrical     Standard           UL 61010-2-020--
 Equipment for Laboratory Use;   withdrawn by       Standard for Safety
 Part 2: Particular              Standards          Requirements for
 Requirements for Laboratory     Organization.      Electrical Equipment
 Equipment for Laboratory                           for Laboratory Use;
 Centrifuges.                                       Part 2-020:
                                                    Particular
                                                    Requirements for
                                                    Laboratory Equipment
                                                    for Laboratory
                                                    Centrifuges.
IEEE C37.09 Standard Test       Withdrawn........  None.
 Procedure for AC High-Voltage
 Circuit Breakers Rated on a
 Symmetrical Current Basis.
IEEE C37.29 Low-Voltage AC      Withdrawn........  None.
 Power Circuit Protectors Used
 in Enclosures.
IEEE C37.45 Distribution        Withdrawn........  None.
 Enclosed Single-Pole Air
 Switches.
NEMA C37.52 Low-Voltage AC      Withdrawn........  None.
 Power Circuit Protectors Used
 in Enclosures--Test
 Procedures.
ISA 82.02.01 Electric and       Withdrawn........  None.
 Electronic Test, Measuring,
 Controlling and Related
 Equipment: General
 Requirement.
UL 1244.......................  Withdrawn........  None.
UL 1448.......................  Withdrawn and      UL 60745-2-15
                                 Replaced.          Particular
                                                    Requirements for
                                                    Hedge Trimmers.
ISA 60079-2 Explosive           Withdrawn and      UL 60079-2 Explosive
 Atmospheres--Part 2:            replaced.          Atmospheres--Part 2:
 Equipment Protection by                            Equipment Protection
 Pressurized Enclosures ``p''.                      by Pressurized
                                                    Enclosures ``p''.
ISA 60079-5 Explosive           Withdrawn and      UL 60079-5 Explosive
 Atmospheres--Part 5:            replaced.          Atmospheres--Part 5:
 Equipment Protection by Power                      Equipment Protection
 Filling ``q''.                                     by Powder Filling
                                                    ``q''.
ISA 60079-18 Explosive          Withdrawn and      UL 60079-18 Explosive
 Atmospheres--Part 18:           replaced.          Atmospheres--Part
 Equipment Protection by                            18: Equipment
 Encapsulation ``m''.                               Protection by
                                                    Encapsulation ``m''.
ISA 60079-26 Explosive          Withdrawn and      UL 60079-26 Explosive
 Atmospheres--Part 26:           replaced.          Atmospheres--Part
 Equipment for Use in Class I,                      26: Equipment for
 Zone 0 Hazardous (Classified)                      Use in Class I, Zone
 Locations.                                         0 Hazardous
                                                    (Classified)
                                                    Locations.

[[Page 16668]]

 
UL 745-1 Portable Electric      Withdrawn........  None.
 Tools.
UL 745-2-1 Particular           Withdrawn........  None.
 Requirements of Drills.
UL 745-2-5 Particular           Withdrawn........  None.
 Requirements for Circular
 Saws and Circular Knives.
UL 745-2-17 Particular          Withdrawn........  None.
 Requirements for Routers and
 Trimmers.
UL 745-2-36 Particular          Withdrawn........  None.
 Requirements for Hand Motor
 Tools.
UL 745-2-37 Particular          Withdrawn........  None.
 Requirements for Plate
 Jointers.
UL 61010A-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Equipment for Laboratory Use;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010A-2-010 Electrical      Withdrawn and      UL 61010-2-010
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for the Heating                       Control and
 of Materials.                                      Laboratory Use--Part
                                                    2-010: Particular
                                                    Requirements for
                                                    Laboratory Equipment
                                                    for the Heating of
                                                    Materials.
UL 61010A-2-020 Electrical      Withdrawn and      UL 61010-2-020
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control, and
 Centrifuges.                                       Laboratory Use--Part
                                                    2-020: Particular
                                                    Requirements for
                                                    Laboratory
                                                    Centrifuges.
UL 61010A-2-041 Electrical      Withdrawn and      UL 61010-1 (no direct
 Equipment for Laboratory Use:   replaced.          replacement).
 Part 2: Particular
 Requirements for Autoclaves
 Using Steam for the Treatment
 of Medical Materials for
 Laboratory Purposes.
UL 61010A-2-051 Electrical      Withdrawn and      UL 61010-2-051
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control and
 Equipment Mixing and Stirring.                     Laboratory Use--Part
                                                    2-051: Particular
                                                    Requirements for
                                                    Laboratory Equipment
                                                    for Mixing and
                                                    Stirring.
UL 61010A-2-061 Electrical      Withdrawn and      UL 61010-2-061
 Equipment for Laboratory Use:   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control and
 Atomic Spectrometers with                          Laboratory Use--Part
 Thermal Atomization and                            2-061: Particular
 Ionization.                                        Requirements for
                                                    Laboratory Atomic
                                                    Spectrometers with
                                                    Thermal Atomization
                                                    and Ionization.
UL 61010B-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Measuring and Test Equipment;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010B-2-031 Electrical      Withdrawn and      UL 61010-1 (no direct
 Equipment for Measurement,      replaced.          replacement).
 Control and Laboratory Use:
 Part 2: Particular
 Requirements for Hand-Held
 Probe Assemblies for
 Electrical Measurement and
 Test.
UL 61010C-1 Process Control     Withdrawn and      UL 61010-1 Electrical
 Equipment.                      replaced.          Equipment for
                                                    Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
------------------------------------------------------------------------


 Table 4--Test Standards OSHA Is Removing From the Scope of Recognition
                           of FM Approvals LLC
------------------------------------------------------------------------
                                                      Replacement test
Test standard(s) being removed      Reason for        standard(s)  (if
                                     removal            applicable)
------------------------------------------------------------------------
UL 1093.......................  Withdrawn........  None.
ISA 82.02.01 Electric and       Withdrawn........  None.
 Electronic Test, Measuring,
 Controlling and Related
 Equipment: General
 Requirement.
UL 61010A-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Equipment for Laboratory Use;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010B-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Measuring and Test Equipment;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
------------------------------------------------------------------------


 Table 5--Test Standards OSHA Is Removing From the Scope of Recognition
                    of Intertek Testing Services, NA
------------------------------------------------------------------------
                                                      Replacement test
Test standard(s) being removed      Reason for        standard(s)  (if
                                     removal            applicable)
------------------------------------------------------------------------
UL 61010A-2-020--Electrical     Standard           UL 61010-2-020--
 Equipment for Laboratory Use;   withdrawn by       Standard for Safety
 Part 2: Particular              Standards          Requirements for
 Requirements for Laboratory     Organization.      Electrical Equipment
 Equipment for Laboratory                           for Laboratory Use;
 Centrifuges.                                       Part 2-020:
                                                    Particular
                                                    Requirements for
                                                    Laboratory
                                                    Centrifuges.

[[Page 16669]]

 
IEEE C37.29 Low-Voltage AC      Withdrawn........  None.
 Power Circuit Protectors Used
 in Enclosures.
ISA 82.02.01 Electric and       Withdrawn........  None.
 Electronic Test, Measuring,
 Controlling and Related
 Equipment: General
 Requirement.
UL 1093 Halogenated Agent Fire  Withdrawn........  None.
 Extinguishers.
UL 1244 Electrical and          Withdrawn........  None.
 Electronic Measuring and
 Testing Equipment.
UL 1448 Electric Hedge          Withdrawn and      UL 60745-2-15
 Trimmers.                       Replaced.          Particular
                                                    Requirements for
                                                    Hedge Trimmers.
ISA 60079-2 Explosive           Withdrawn and      UL 60079-2 Explosive
 Atmospheres--Part 2:            replaced.          Atmospheres--Part 2:
 Equipment Protection by                            Equipment Protection
 Pressurized Enclosures ``p''.                      by Pressurized
                                                    Enclosures ``p.''
ISA 60079-5 Explosive           Withdrawn and      UL 60079-5 Explosive
 Atmospheres--Part 5:            replaced.          Atmospheres--Part 5:
 Equipment Protection by Power                      Equipment Protection
 Filling ``q''.                                     by Powder Filling
                                                    ``q.''
ISA 60079-18 Explosive          Withdrawn and      UL 60079-18 Explosive
 Atmospheres--Part 18:           replaced.          Atmospheres--Part
 Equipment Protection by                            18: Equipment
 Encapsulation ``m''.                               Protection by
                                                    Encapsulation ``m.''
ISA 60079-26 Explosive          Withdrawn and      UL 60079-26 Explosive
 Atmospheres--Part 26:           replaced.          Atmospheres--Part
 Equipment for Use in Class I,                      26: Equipment for
 Zone 0 Hazardous (Classified)                      Use in Class I, Zone
 Locations.                                         0 Hazardous
                                                    (Classified)
                                                    Locations.
UL 745-1 Portable Electric      Withdrawn........  None.
 Tools.
UL 745-2-1 Particular           Withdrawn........  None.
 Requirements of Drills.
UL 745-2-5 Particular           Withdrawn........  None.
 Requirements for Circular
 Saws and Circular Knives.
UL 745-2-17 Particular          Withdrawn........  None.
 Requirements for Routers and
 Trimmers.
UL 745-2-36 Particular          Withdrawn........  None.
 Requirements for Hand Motor
 Tools.
UL 745-2-37 Particular          Withdrawn........  None.
 Requirements for Plate
 Jointers.
UL 61010A-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Equipment for Laboratory Use;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010A-2-010 Electrical      Withdrawn and      UL 61010-2-010
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for the Heating                       Control and
 of Materials.                                      Laboratory Use--Part
                                                    2-010: Particular
                                                    Requirements for
                                                    Laboratory Equipment
                                                    for the Heating of
                                                    Materials.
UL 61010A-2-020 Electrical      Withdrawn and      UL 61010-2-020
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control, and
 Centrifuges.                                       Laboratory Use--Part
                                                    2-020: Particular
                                                    Requirements for
                                                    Laboratory
                                                    Centrifuges.
UL 61010A-2-041 Electrical      Withdrawn and      UL 61010-1 (no direct
 Equipment for Laboratory Use:   replaced.          replacement).
 Part 2: Particular
 Requirements for Autoclaves
 Using Steam for the Treatment
 of Medical Materials for
 Laboratory Purposes.
UL 61010A-2-051 Electrical      Withdrawn and      UL 61010-2-051
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control and
 Equipment Mixing and Stirring.                     Laboratory Use--Part
                                                    2-051: Particular
                                                    Requirements for
                                                    Laboratory Equipment
                                                    for Mixing and
                                                    Stirring.
UL 61010A-2-061 Electrical      Withdrawn and      UL 61010-2-061
 Equipment for Laboratory Use:   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control and
 Atomic Spectrometers with                          Laboratory Use--Part
 Thermal Atomization and                            2-061: Particular
 Ionization.                                        Requirements for
                                                    Laboratory Atomic
                                                    Spectrometers with
                                                    Thermal Atomization
                                                    and Ionization.
UL 61010B-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Measuring and Test Equipment;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010B-2-031 Electrical      Withdrawn and      UL 61010-1 (no direct
 Equipment for Measurement,      replaced.          replacement).
 Control and Laboratory Use:
 Part 2: Particular
 Requirements for Hand-Held
 Probe Assemblies for
 Electrical Measurement and
 Test.
UL 61010C-1 Process Control     Withdrawn and      UL 61010-1 Electrical
 Equipment.                      replaced.          Equipment for
                                                    Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
------------------------------------------------------------------------


 Table 6--Test Standards OSHA Is Removing From the Scope of Recognition
                        of MET Laboratories, Inc.
------------------------------------------------------------------------
                                                      Replacement test
Test standard(s) being removed      Reason for        standard(s)  (if
                                     removal            applicable)
------------------------------------------------------------------------
UL 1448 Electric Edge Trimmers  Withdrawn and      UL 60745-2-15
                                 Replaced.          Particular
                                                    Requirements for
                                                    Hedge Trimmers.

[[Page 16670]]

 
UL 1244 Electrical and          Withdrawn........  None.
 Electronic Measuring and
 Testing Equipment.
UL 61010A-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Equipment for Laboratory Use;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010B-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Measuring and Test Equipment;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010C-1 Process Control     Withdrawn and      UL 61010-1 Electrical
 Equipment.                      replaced.          Equipment for
                                                    Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
------------------------------------------------------------------------


 Table 7--Test Standards OSHA Is Removing From the Scope of Recognition
                 of TUV Rheinland of North America, Inc.
------------------------------------------------------------------------
                                                      Replacement test
Test standard(s) being removed      Reason for        standard(s)  (if
                                     removal            applicable)
------------------------------------------------------------------------
UL 1448.......................  Withdrawn and      UL 60745-2-15
                                 replaced.          Particular
                                                    Requirements for
                                                    Hedge Trimmers.
UL 745-1 Portable Electric      Withdrawn........  None.
 Tools.
UL 745-2-1 Particular           Withdrawn........  None.
 Requirements of Drills.
UL 745-2-5 Particular           Withdrawn........  None.
 Requirements for Circular
 Saws and Circular Knives.
UL 745-2-17 Particular          Withdrawn........  None.
 Requirements for Routers and
 Trimmers.
UL 745-2-36 Particular          Withdrawn........  None.
 Requirements for Hand Motor
 Tools.
UL 745-2-37 Particular          Withdrawn........  None.
 Requirements for Plate
 Jointers.
UL 61010A-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Equipment for Laboratory Use;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010B-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Measuring and Test Equipment;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010C-1 Process Control     Withdrawn and      UL 61010-1 Electrical
 Equipment.                      replaced.          Equipment for
                                                    Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
------------------------------------------------------------------------


 Table 8--Test Standards OSHA Is Removing From the Scope of Recognition
                        of TUV SUD America, Inc.
------------------------------------------------------------------------
                                                      Replacement test
Test standard(s) being removed      Reason for        standard(s)  (if
                                     removal            applicable)
------------------------------------------------------------------------
UL 61010A-2-020--Electrical     Standard           UL 61010-2-020--
 Equipment for Laboratory Use;   withdrawn by       Standard for Safety
 Part 2: Particular              Standards          Requirements for
 Requirements for Laboratory     Organization.      Electrical Equipment
 Equipment for Laboratory                           for Laboratory Use;
 Centrifuges.                                       Part 2-020:
                                                    Particular
                                                    Requirements for
                                                    Laboratory
                                                    Centrifuges.
UL 1448.......................  Withdrawn and      UL 60745-2-15
                                 replaced.          Particular
                                                    Requirements for
                                                    Hedge Trimmers.
UL 745-1 Portable Electric      Withdrawn........  None.
 Tools.
UL 745-2-1 Particular           Withdrawn........  None.
 Requirements of Drills.
UL 745-2-5 Particular           Withdrawn........  None.
 Requirements for Circular
 Saws and Circular Knives.
UL 745-2-17 Particular          Withdrawn........  None.
 Requirements for Routers and
 Trimmers.
UL 745-2-36 Particular          Withdrawn........  None.
 Requirements for Hand Motor
 Tools.
UL 745-2-37 Particular          Withdrawn........  None.
 Requirements for Plate
 Jointers.
UL 61010A-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Equipment for Laboratory Use;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010A-2-010 Electrical      Withdrawn and      UL 61010-2-010.
 Equipment for Laboratory Use;   replaced.
 Part 2: Particular
 Requirements for the Heating
 of Materials.

[[Page 16671]]

 
UL 61010A-2-020 Electrical      Withdrawn and      UL 61010-2-010
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control and
 Centrifuges.                                       Laboratory Use--Part
                                                    2-010: Particular
                                                    Requirements for
                                                    Laboratory Equipment
                                                    for the Heating of
                                                    Materials.
UL 61010A-2-041 Electrical      Withdrawn and      UL 61010-1 (no direct
 Equipment for Laboratory Use:   replaced.          replacement).
 Part 2: Particular
 Requirements for Autoclaves
 Using Steam for the Treatment
 of Medical Materials for
 Laboratory Purposes.
UL 61010A-2-051 Electrical      Withdrawn and      UL 61010-2-051
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control and
 Equipment Mixing and Stirring.                     Laboratory Use--Part
                                                    2-051: Particular
                                                    Requirements for
                                                    Laboratory Equipment
                                                    for Mixing and
                                                    Stirring.
UL 61010A-2-061 Electrical      Withdrawn and      UL 61010-2-061
 Equipment for Laboratory Use:   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control and
 Atomic Spectrometers with                          Laboratory Use--Part
 Thermal Atomization and                            2-061: Particular
 Ionization.                                        Requirements for
                                                    Laboratory Atomic
                                                    Spectrometers with
                                                    Thermal Atomization
                                                    and Ionization.
UL 61010B-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Measuring and Test Equipment;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010B-2-031 Electrical      Withdrawn and      UL 61010-1 (no direct
 Equipment for Measurement,      replaced.          replacement).
 Control and Laboratory Use:
 Part 2: Particular
 Requirements for Hand-Held
 Probe Assemblies for
 Electrical Measurement and
 Test.
------------------------------------------------------------------------


 Table 9--Test Standards OSHA Is Removing From the Scope of Recognition
                             of TUVPSG, Inc.
------------------------------------------------------------------------
                                                      Replacement test
Test standard(s) being removed      Reason for        standard(s)  (if
                                     removal            applicable)
------------------------------------------------------------------------
UL 745-1 Portable Electric      Withdrawn........  None.
 Tools.
UL 745-2-1 Particular           Withdrawn........  None.
 Requirements of Drills.
UL 745-2-5 Particular           Withdrawn........  None.
 Requirements for Circular
 Saws and Circular Knives.
UL 745-2-17 Particular          Withdrawn........  None.
 Requirements for Routers and
 Trimmers.
UL 745-2-36 Particular          Withdrawn........  None.
 Requirements for Hand Motor
 Tools.
UL 745-2-37 Particular          Withdrawn........  None.
 Requirements for Plate
 Jointers.
UL 61010A-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Equipment for Laboratory Use;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010A-2-010 Electrical      Withdrawn and      UL 61010-2-010
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for the Heating                       Control and
 of Materials.                                      Laboratory Use--Part
                                                    2-010: Particular
                                                    Requirements for
                                                    Laboratory Equipment
                                                    for the Heating of
                                                    Materials.
UL 61010A-2-020 Electrical      Withdrawn and      UL 61010-2-020
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control, and
 Centrifuges.                                       Laboratory Use--Part
                                                    2-020: Particular
                                                    Requirements for
                                                    Laboratory
                                                    Centrifuges.
UL 61010A-2-041 Electrical      Withdrawn and      UL 61010-1 (no direct
 Equipment for Laboratory Use:   replaced.          replacement).
 Part 2: Particular
 Requirements for Autoclaves
 Using Steam for the Treatment
 of Medical Materials for
 Laboratory Purposes.
UL 61010A-2-051 Electrical      Withdrawn and      UL 61010-2-051
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control and
 Equipment Mixing and Stirring.                     Laboratory Use--Part
                                                    2-051: Particular
                                                    Requirements for
                                                    Laboratory Equipment
                                                    for Mixing and
                                                    Stirring.
UL 61010A-2-061 Electrical      Withdrawn and      UL 61010-2-061
 Equipment for Laboratory Use:   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control and
 Atomic Spectrometers with                          Laboratory Use--Part
 Thermal Atomization and                            2-061: Particular
 Ionization.                                        Requirements for
                                                    Laboratory Atomic
                                                    Spectrometers with
                                                    Thermal Atomization
                                                    and Ionization.
UL 61010B-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Measuring and Test Equipment;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
------------------------------------------------------------------------


[[Page 16672]]


 Table 10--Test Standards OSHA Is Removing From the Scope of Recognition
                    of Underwriters Laboratory, Inc.
------------------------------------------------------------------------
                                                      Replacement test
Test standard(s) being removed      Reason for        standard(s)  (if
                                     removal            applicable)
------------------------------------------------------------------------
UL 61010A-2-020--Electrical     Standard           UL 61010-2-020--
 Equipment for Laboratory Use;   withdrawn by       Standard for Safety
 Part 2: Particular              Standards          Requirements for
 Requirements for Laboratory     Organization.      Electrical Equipment
 Equipment for Laboratory                           for Laboratory Use;
 Centrifuges.                                       Part 2-020:
                                                    Particular
                                                    Requirements for
                                                    Laboratory
                                                    Centrifuges.
ANSI C37.44 Distribution Oil    Withdrawn........  None.
 Cutouts and Fuse Links.
IEEE C37.29 Low-Voltage AC      Withdrawn........  None.
 Power Circuit Protectors Used
 in Enclosures.
IEEE C37.45 Distribution        Withdrawn........  None.
 Enclosed Single-Pole Air
 Switches.
IEEE C37.52 Low-Voltage AC      Withdrawn........  None.
 Power Circuit Protectors Used
 in Enclosures--Test
 Procedures.
UL 1093 Halogenated Agent Fire  Withdrawn........  None.
 Extinguishers.
UL 1244 Electrical and          Withdrawn........  None.
 Electronic Measuring and
 Testing Equipment.
UL 1448 Electric Hedge          Withdrawn and      UL 60745-2-15
 Trimmers.                       replaced.          Particular
                                                    Requirements for
                                                    Hedge Trimmers.
ISA 60079-2 Explosive           Withdrawn and      UL 60079-2 Explosive
 Atmospheres--Part 2:            replaced.          Atmospheres--Part 2:
 Equipment Protection by                            Protection by
 Pressurized Enclosures ``p''.                      Pressurized
                                                    Enclosures ``p''.
ISA 60079-5 Explosive           Withdrawn and      UL 60079-5 Explosive
 Atmospheres--Part 5:            replaced.          Atmospheres--Part 5:
 Equipment Protection by Power                      Equipment Protection
 Filling ``q''.                                     by Powder Filling
                                                    ``q''.
ISA 60079-18 Explosive          Withdrawn and      UL 60079-18 Explosive
 Atmospheres--Part 18:           replaced.          Atmospheres--Part
 Equipment Protection by                            18: Equipment
 Encapsulation ``m''.                               Protection by
                                                    Encapsulation ``m''.
ISA 60079-26 Explosive          Withdrawn and      UL 60079-26 Explosive
 Atmospheres--Part 26:           replaced.          Atmospheres--Part
 Equipment for Use in Class I,                      26: Equipment for
 Zone 0 Hazardous (Classified)                      Use in Class I, Zone
 Locations.                                         0 Hazardous
                                                    (Classified)
                                                    Locations.
UL 745-1 Portable Electric      Withdrawn........  None.
 Tools.
UL 745-2-1 Particular           Withdrawn........  None.
 Requirements of Drills.
UL 745-2-5 Particular           Withdrawn........  None.
 Requirements for Circular
 Saws and Circular Knives.
UL 745-2-17 Particular          Withdrawn........  None.
 Requirements for Routers and
 Trimmers.
UL 745-2-36 Particular          Withdrawn........  None.
 Requirements for Hand Motor
 Tools.
UL 745-2-37 Particular          Withdrawn........  None.
 Requirements for Plate
 Jointers.
UL 61010A-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Equipment for Laboratory Use;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010A-2-010 Electrical      Withdrawn and      UL 61010-2-010
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for the Heating                       Control and
 of Materials.                                      Laboratory Use--Part
                                                    2-010: Particular
                                                    Requirements for
                                                    Laboratory Equipment
                                                    for the Heating of
                                                    Materials.
UL 61010A-2-020 Electrical      Withdrawn and      UL 61010-2-020
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control, and
 Centrifuges.                                       Laboratory Use--Part
                                                    2-020: Particular
                                                    Requirements for
                                                    Laboratory
                                                    Centrifuges.
UL 61010A-2-041 Electrical      Withdrawn and      UL 61010-1 (no direct
 Equipment for Laboratory Use:   replaced.          replacement).
 Part 2: Particular
 Requirements for Autoclaves
 Using Steam for the Treatment
 of Medical Materials for
 Laboratory Purposes.
UL 61010A-2-051 Electrical      Withdrawn and      UL 61010-2-051
 Equipment for Laboratory Use;   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control and
 Equipment Mixing and Stirring.                     Laboratory Use--Part
                                                    2-051: Particular
                                                    Requirements for
                                                    Laboratory Equipment
                                                    for Mixing and
                                                    Stirring.
UL 61010A-2-061 Electrical      Withdrawn and      UL 61010-2-061
 Equipment for Laboratory Use:   replaced.          Electrical Equipment
 Part 2: Particular                                 for Measurement,
 Requirements for Laboratory                        Control and
 Atomic Spectrometers with                          Laboratory Use--Part
 Thermal Atomization and                            2-061: Particular
 Ionization.                                        Requirements for
                                                    Laboratory Atomic
                                                    Spectrometers with
                                                    Thermal Atomization
                                                    and Ionization.
UL 61010B-1 Electrical          Withdrawn and      UL 61010-1 Electrical
 Measuring and Test Equipment;   replaced.          Equipment for
 Part 1: General Requirements.                      Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
UL 61010B-2-031 Electrical      Withdrawn and      UL 61010-1 (no direct
 Equipment for Measurement,      replaced.          replacement).
 Control and Laboratory Use:
 Part 2: Particular
 Requirements for Hand-Held
 Probe Assemblies for
 Electrical Measurement and
 Test.
UL 61010C-1 Process Control     Withdrawn and      UL 61010-1 Electrical
 Equipment.                      replaced.          Equipment for
                                                    Measurement, Control
                                                    and Laboratory Use;
                                                    Part 1: General
                                                    Requirements.
------------------------------------------------------------------------


[[Page 16673]]

    OSHA will place on its informational web pages the modifications to 
each NRTL's scope of recognition. These web pages detail the scope of 
recognition for each NRTL, including the test standards the NRTL may 
use to test and certify products under OSHA's NRTL Program. OSHA also 
will add to the list of ``Appropriate Test Standards'' web page, those 
test standards added to the NRTL Program's List of Appropriate Test 
Standards. The agency will add to the ``Standards No Longer 
Recognized'' web page those test standards that OSHA no longer 
recognizes or permits under the NRTL Program. Access to these web pages 
is available at http://www.osha.gov/dts/otpca/nrtl/index.html.

IV. Authority and Signature

    Loren Sweatt, Principal Deputy Assistant Secretary of Labor for 
Occupational Safety and Health, authorized the preparation of this 
notice. Accordingly, the agency is issuing this notice pursuant to 29 
U.S.C. 657(g)(2)), Secretary of Labor's Order No. 1-2012 (77 FR 3912, 
Jan. 25, 2012), and 29 CFR 1910.7.

    Signed at Washington, DC, on March 19, 2020.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor for Occupational Safety 
and Health.
[FR Doc. 2020-06144 Filed 3-23-20; 8:45 am]
BILLING CODE 4510-26-P