[Federal Register Volume 85, Number 54 (Thursday, March 19, 2020)]
[Notices]
[Pages 15849-15850]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-05674]


-----------------------------------------------------------------------

OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE


Notice of Product Exclusion Extensions: China's Acts, Policies, 
and Practices Related to Technology Transfer, Intellectual Property, 
and Innovation

AGENCY: Office of the United States Trade Representative.

ACTION: Notice of product exclusion extensions.

-----------------------------------------------------------------------

SUMMARY: Effective July 6, 2018, the U.S. Trade Representative imposed 
additional duties on goods of China with an annual trade value of 
approximately $34 billion as part of the action in the Section 301 
investigation of China's acts, policies, and practices related to 
technology transfer, intellectual property, and innovation. The U.S. 
Trade Representative initiated the exclusion process in July 2018 and, 
to date, has granted ten sets of exclusions. The second set of 
exclusions was published in March 2019 and will expire in March 2020. 
On December 30, 2019, the U.S. Trade Representative established a 
process for the public to comment on whether to extend particular 
exclusions granted in March 2019 for up to 12 months. This notice 
announces the U.S. Trade Representative's determination to extend 
certain exclusions for 12 months.

DATES: The product exclusion extensions announced in this notice will 
apply as of March 25, 2020 and extend for one year. U.S. Customs and 
Border Protection will issue instructions on entry guidance and 
implementation.

FOR FURTHER INFORMATION CONTACT: For general questions about this 
notice, contact Assistant General Counsels Philip Butler or Benjamin 
Allen, or Director of Industrial Goods Justin Hoffmann at (202) 395-
5725. For specific questions on customs classification or 
implementation of the product exclusions identified in the Annex to 
this notice, contact [email protected].

SUPPLEMENTARY INFORMATION: 

A. Background

    For background on the proceedings in this investigation, please see 
the prior notices issued in the investigation, including 82 FR 40213 
(August 23, 2017), 83 FR 14906 (April 6, 2018), 83 FR 28710 (June 20, 
2018), 83 FR 32181 (July 11, 2018), 83 FR 67463 (December 28, 2018), 84 
FR 11152 (March 25, 2019), 84 FR 16310 (April 18, 2019), 84 FR 21389 
(May 14, 2019), 84 FR 25895 (June 4, 2019), 84 FR 32821 (July 9, 2019), 
84 FR 46212 (September 3, 2019), 84 FR 49564 (September 20, 2019), 84 
FR 52567 (October 2, 2019), 84 FR 58427 (October 31, 2019), 84 FR 70616 
(December 23, 2019), 84 FR 72102 (December 30, 2019), 85 FR 6687 
(February 5, 2020), and 85 FR 12373 (March 2, 2020).
    Effective July 6, 2018, the U.S. Trade Representative imposed 
additional 25 percent duties on goods of China classified in 818 8-
digit subheadings of the Harmonized Tariff Schedule of the United 
States (HTSUS), with an approximate annual trade value of $34 billion. 
See 83 FR 28710 (the $34 billion action). The U.S. Trade 
Representative's determination included a decision to establish a 
process by which U.S. stakeholders could request exclusion of

[[Page 15850]]

particular products classified within an 8-digit HTSUS subheading 
covered by the $34 billion action from the additional duties. The U.S. 
Trade Representative issued a notice setting out the process for the 
product exclusions, and opened a public docket. See 83 FR 32181 (the 
July 11 notice).
    In March 2019, the U.S. Trade Representative granted a set of 
exclusion requests, which expire on March 25, 2020. See 83 FR 67463 
(the March 25 notice). On December 30, 2019, the U.S. Trade 
Representative invited the public to comment on whether to extend, by 
up to twelve months, particular exclusions granted in the March 25 
notice. See 84 FR 72102 (the December 30 notice).
    Under the December 30 notice, commenters were asked to address 
whether the particular product and/or a comparable product is available 
from sources in the United States and/or in third countries; any 
changes in the global supply chain since July 2018 with respect to the 
particular product, or any other relevant industry developments; and 
efforts, if any, importers or U.S. purchasers have undertaken since 
July 2018 to source the product from the United States or third 
countries.
    In addition, commenters who were importers and/or purchasers of the 
products covered by an exclusion were asked to provide information 
regarding their efforts since July 2018 to source the product from the 
United States or third countries; the value and quantity of the 
Chinese-origin product covered by the specific exclusion request 
purchased in 2018, the first half of 2018, and the first half of 2019, 
and whether these purchases are from a related company; whether Chinese 
suppliers have lowered their prices for products covered by the 
exclusion following the imposition of duties; the value and quantity of 
the product covered by the exclusion purchased from domestic and third 
country sources in 2018, the first half of 2018 and the first half of 
2019; the commenter's gross revenue for 2018, the first half of 2018, 
and the first half of 2019; whether the Chinese-origin product of 
concern is sold as a final product or as an input; whether the 
imposition of duties on the products covered by the exclusion will 
result in severe economic harm to the commenter or other U.S. 
interests; and any additional information in support or in opposition 
of the extending the exclusion.
    The December 30 notice required the submission of comments no later 
than February 15, 2020.

B. Determination To Extend Certain Exclusions

    Based on the evaluation of the factors set out in the July 11 
notice and December 30 notice, which are summarized above, pursuant to 
sections 301(b), 301(c), and 307(a) of the Trade Act of 1974, as 
amended, and in accordance with the advice of the interagency Section 
301 Committee, the U.S. Trade Representative has determined to extend 
for 12 months certain product exclusions covered by the March 25 
notice, as set out in the Annex to this notice. The U.S. Trade 
Representative's determination also takes into account advice from 
advisory committees and any public comments concerning the extension of 
the pertinent exclusion.
    In accordance with the July 11 notice, the exclusions are available 
for any product that meets the description in the Annex, regardless of 
whether the importer filed an exclusion request. Further, the scope of 
each exclusion is governed by the scope of the 10-digit HTSUS headings 
and product descriptions in the Annex to this notice, and not by the 
product descriptions set out in any particular request for exclusion.
    As set out in the Annex, the U.S. Trade Representative has 
determined to extend the following exclusions under U.S. note 20(i) to 
subchapter III of chapter 99 of the HTSUS: (1), (3), (5), (10), (13), 
(14), (15), (17), (19), (23) and (32).

Joseph Barloon,
General Counsel, Office of the U.S. Trade Representative.

Annex

    Pursuant to the product exclusion process, the U.S. Trade 
Representative has determined to extend the following exclusions 
granted under the March 25, 2019 notice under heading 9903.88.06 and 
U.S. note 20(i) to subchapter III of chapter 99 of the HTSUS:

(1) 8412.21.0045
(3) 8607.21.1000
(5) Breast pumps, whether or not with accessories or batteries 
(described in statistical reporting number 8413.81.0040)
(10) Machinery for filtering water, submersible, powered by batteries, 
manually operated, such machinery designed for use in pools, basins, 
aquariums, spas or similar contained bodies of water (described in 
statistical reporting number 8421.21.0000)
(13) Hand-held ultraviolet water purifiers, powered by batteries 
(described in statistical reporting number 8421.21.0000)
(14) Filters designed to remove sulfites from wine (described in 
statistical reporting number 8421.22.0000)
(15) Filter housings, covers, or couplings, the foregoing of steel and 
comprising parts of machinery or apparatus for filtering liquids 
(described in statistical reporting number 8421.99.0040)
(17) Vulcanized rubber tracks, each incorporating cords and cleats of 
steel, designed for use on construction equipment (described in 
statistical reporting number 8431.49.9095)
(19) Automated data processing storage units (other than magnetic disk 
drive units), not assembled in cabinets for placing on a table or 
similar place, not presented with any other unit of a system (described 
in statistical reporting number 8471.70.6000)
(23) Electric motors, AC, permanent split capacitor type, each in a 
housing with outside diameter of 84 mm or less, with output of 6 W or 
more but not exceeding 16 W (described in statistical reporting number 
8501.10.4020)
(32) Inoculator sets of plastics, each consisting of a plate with 
multiple wells, a display tray, and a lid; when assembled, the set 
measuring 105 mm or more but not exceeding 108 mm in width, 138 mm or 
more but not exceeding 140 mm in depth, and 6.5 mm or less in thickness 
(described in statistical reporting number 9027.90.5650)

    Effective with respect to goods entered for consumption, or 
withdrawn from warehouse for consumption, on or after 12:01 a.m. 
eastern daylight time on July 6, 2018, and before March 25, 2021, the 
additional duties provided for in heading 9903.88.01 shall not apply to 
products which are provided for in heading 9903.88.06 and U.S. notes 
20(i)(1), 20(i)(3), 20(i)(5), 20(i)(10), 20(i)(13), 20(i)(14), 
20(i)(15), 20(i)(17), 20(i)(19), 20(i)(23) and 20(i)(32) to subchapter 
III of chapter 99 of the HTSUS.

[FR Doc. 2020-05674 Filed 3-18-20; 8:45 am]
 BILLING CODE 3290-F0-P