[Federal Register Volume 84, Number 210 (Wednesday, October 30, 2019)]
[Notices]
[Pages 58152-58153]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-23618]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2013-0338; FRL-10001-64-OMS]


Information Collection Request Submitted to OMB for Review and 
Approval; Comment Request; NESHAP for the Manufacture of Amino/Phenolic 
Resins (Renewal)

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency (EPA) has submitted an 
information collection request (ICR), NESHAP for the Manufacture of 
Amino/Phenolic Resins (EPA ICR Number 1869.10, OMB Control Number 2060-
0434) to the Office of Management and Budget (OMB) for review and 
approval in accordance with the Paperwork

[[Page 58153]]

Reduction Act. This is a proposed extension of the ICR, which is 
currently approved through January 31, 2020. Public comments were 
previously requested via the Federal Register on May 6, 2019 during a 
60-day comment period. This notice allows for an additional 30 days for 
public comments. A fuller description of the ICR is given below, 
including its estimated burden and cost to the public. An agency may 
not conduct or sponsor and a person is not required to respond to a 
collection of information unless it displays a currently valid OMB 
control number.

DATES: Additional comments may be submitted on or before November 29, 
2019.

ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2013-0338, to (1) EPA online using www.regulations.gov (our 
preferred method), by email to [email protected], or by mail to: EPA 
Docket Center, Environmental Protection Agency, Mail Code 28221T, 1200 
Pennsylvania Ave. NW, Washington, DC 20460, and (2) OMB via email to 
[email protected]. Address comments to OMB Desk Officer for 
EPA.
    EPA's policy is that all comments received will be included in the 
public docket without change including any personal information 
provided, unless the comment includes profanity, threats, information 
claimed to be Confidential Business Information (CBI) or other 
information whose disclosure is restricted by statute.

FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, 
Assistance, and Media Programs Division, Office of Compliance, Mail 
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, 
Washington, DC 20460; telephone number: (202) 564-2970; fax number: 
(202) 564-0050; email address: [email protected].

SUPPLEMENTARY INFORMATION: Supporting documents, which explain in 
detail the information that the EPA will be collecting, are available 
in the public docket for this ICR. The docket can be viewed online at 
www.regulations.gov or in person at the EPA Docket Center, EPA West, 
Room 3334, 1301 Constitution Ave. NW, Washington, DC. The telephone 
number for the Docket Center is 202-566-1744. For additional 
information about EPA's public docket, visit http://www.epa.gov/dockets.
    Abstract: The National Emission Standards for Hazardous Air 
Pollutants (NESHAP) for the regulations published at 40 CFR part 63, 
subpart OOO were proposed on December 14, 1998, promulgated on January 
20, 2000, and amended on April 20, 2006, October 8, 2014, and October 
15, 2018. These regulations apply to existing facilities and new 
facilities that engage in the manufacture of amino/phenolic resins with 
HAP emissions points that include: (1) Reactor batch process vents; (2) 
nonreactor batch process vents; (3) continuous process vents; (4) 
equipment leaks; (5) wastewater; (6) storage vessels; and (7) heat 
exchangers. New facilities include those that commenced construction or 
reconstruction after the date of proposal of the 2014 rule amendment. 
This information is being collected to assure compliance with 40 CFR 
part 63, subpart OOO.
    The October 15, 2018 amendments (83 FR 51842) responded to 
petitions for reconsideration regarding the NESHAP rule revisions that 
were promulgated on October 8, 2014 and revised the standards for 
continuous process vents (CPVs) at existing affected sources, revised 
the requirements for storage vessels at new and existing sources during 
periods when an emission control system used to control vents on fixed 
roof storage vessels is undergoing planned routine maintenance, and 
included minor technical corrections to improve rule clarity. This 
renewal incorporates revised costs and burden from activities from 
these final rule amendments.
    In general, all NESHAP standards require initial notifications, 
performance tests, and periodic reports by the owners/operators of the 
affected facilities. They are also required to maintain records of the 
occurrence and duration of any startup, shutdown, or malfunction in the 
operation of an affected facility, or any period during which the 
monitoring system is inoperative. These notifications, reports, and 
records are essential in determining compliance, and are required of 
all affected facilities subject to NESHAP.
    Form Numbers: None.
    Respondents/affected entities: Facilities that manufacture amino/
phenolic resins.
    Respondent's obligation to respond: Mandatory (40 CFR part 63, 
subpart OOO).
    Estimated number of respondents: 19 (total).
    Frequency of response: Initially, occasionally, and semiannually.
    Total estimated burden: 23,300 hours (per year). Burden is defined 
at 5 CFR 1320.3(b).
    Total estimated cost: $4,910,000 (per year), which includes 
$2,210,000 annualized capital or operation & maintenance costs.
    Changes in the Estimates: There is an increase in burden from the 
most recently approved ICR. This renewal incorporates revised costs and 
burden from activities applicable to a subset of facilities with 
storage tanks or continuous process vents, which includes 
recordkeeping, reporting and monitoring requirements. There is an 
increase in the annual O&M costs for facilities with RTOs for control 
of continuous process vents.

Courtney Kerwin,
Director, Regulatory Support Division.
[FR Doc. 2019-23618 Filed 10-29-19; 8:45 am]
 BILLING CODE 6560-50-P