[Federal Register Volume 84, Number 190 (Tuesday, October 1, 2019)]
[Notices]
[Pages 52140-52141]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-21235]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2007-0042]
TUV Rheinland of North America, Inc.: Grant of Expansion of
Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces the final decision to expand
the scope of recognition for TUV Rheinland of North America, Inc. as a
Nationally Recognized Testing Laboratory (NRTL).
DATES: The expansion of the scope of recognition becomes effective on
October 1, 2019.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, U.S. Department of Labor; telephone: (202) 693-1999;
email: [email protected].
General and technical information: Contact Mr. Kevin Robinson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, U.S. Department of Labor; telephone:
(202) 693-2110; email: [email protected]. OSHA's website includes
information about the NRTL Program (see http://www.osha.gov/dts/otpca/nrtl/index.html).
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the expansion of the scope of
recognition of TUV Rheinland of North America, Inc. (TUVRNA) as a NRTL.
TUVRNA's expansion covers the addition of three recognized testing
standards to the NRTL scope of recognition.
OSHA recognition of a NRTL signifies that the organization meets
the requirements specified in 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within the
scope of recognition, and is not a delegation or grant of government
authority. As a result of recognition, employers may use products
properly approved by the NRTL to meet OSHA standards that require
testing and certification.
The agency processes applications by a NRTL for initial
recognition, or for expansion or renewal of this recognition, following
requirements in Appendix A to 29 CFR 1910.7. This appendix requires
that the agency publish two notices in the Federal Register in
processing an application. In the first notice, OSHA announces the
application and provides the preliminary finding and, in the second
notice, the agency provides the final decision on the application.
These notices set forth the NRTL's scope of recognition or
modifications of that scope. OSHA maintains an informational web page
for each NRTL that details the scope of recognition. These pages are
available from the agency's website at http://
[[Page 52141]]
www.osha.gov/dts/otpca/nrtl/index.html.
TUVRNA submitted an application, dated August 7, 2018 (OSHA-2007-
0042-0033), to expand recognition to include the addition of three test
standards to the scope of recognition. OSHA staff performed a detailed
analysis of the application and other pertinent information but did not
perform any onsite reviews in relation to this application.
OSHA published the preliminary notice announcing TUVRNA's expansion
application in the Federal Register on June 5, 2019 (84 FR 26157). The
agency requested comments by June 20, 2019, and the agency received one
comment (OSHA-2007-0042-0036) in support of the application, but the
comment did not require a response from the agency. OSHA now is
proceeding with this final notice to grant expansion of TUVRNA's scope
of recognition.
To obtain or review copies of all public documents pertaining to
TUVRNA's application, go to www.regulations.gov or contact the Docket
Office, Occupational Safety and Health Administration, U.S. Department
of Labor, 200 Constitution Avenue NW, Room N-3655, Washington, DC
20210; telephone: (202) 698-2350. Docket No. OSHA-2007-0042 contains
all materials in the record concerning TUVRNA's recognition.
II. Final Decision and Order
OSHA staff examined TUVRNA's expansion application and examined
other pertinent information. Based on a review of this evidence, OSHA
finds that TUVRNA meets the requirements of 29 CFR 1910.7 for expansion
of recognition, subject to the limitation and conditions listed below.
OSHA, therefore, is proceeding with this final notice to grant
expansion of TUVRNA's scope of recognition.
OSHA limits the expansion of TUVRNA's scope of recognition to
testing and certification of products for demonstration of conformance
to the test standards listed in Table 1.
Table 1 List of Appropriate Test Standards for Inclusion in TUVRNA's
NRTL Scope of Recognition
------------------------------------------------------------------------
Test standard Test standard title
------------------------------------------------------------------------
UL 61010-2-010................ Safety Requirements for Electrical
Equipment for Measurement, Control and
Laboratory Use--Part 2-010: Particular
Requirements for Laboratory Equipment
for the Heating of Materials.
UL 61010-2-020................ Standard for Safety Requirements for
Electrical Equipment for Measurement,
Control and Laboratory Use--Part 2-020:
Particular Requirements for Laboratory
Centrifuges.
UL 61010-2-101................ Safety Requirement for Electrical
Equipment for Measurement, Control and
Laboratory Use--Part 2-101: Particular
Requirements for In Vitro Diagnostic
(IVD) Medical Equipment.
------------------------------------------------------------------------
OSHA's recognition of any NRTL for a particular test standard is
limited to equipment or materials for which OSHA standards require
third-party testing and certification before using them in the
workplace. Consequently, if a test standard also covers any products
for which OSHA does not require such testing and certification, a
NRTL's scope of recognition does not include these products.
The American National Standards Institute (ANSI) may approve the
test standards listed above as American National Standards. However,
for convenience, the use of the designation of the standards-developing
organization for the standard as opposed to the ANSI designation may
occur. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3,
Appendix C, paragraph XIV), any NRTL recognized for a particular test
standard may use either the proprietary version of the test standard or
the ANSI version of that standard. Contact ANSI to determine whether a
test standard is currently ANSI-approved.
A. Conditions
In addition to those conditions already required by 29 CFR 1910.7,
TUVRNA must abide by the following conditions of the recognition:
1. TUVRNA must inform OSHA as soon as possible, in writing, of any
change of ownership, facilities, or key personnel, and of any major
change in its operations as an NRTL, and provide details of the
change(s);
2. TUVRNA must meet all the terms of the recognition and comply
with all OSHA policies pertaining to this recognition; and
3. TUVRNA must continue to meet the requirements for recognition,
including all previously published conditions on TUVRNA's scope of
recognition, in all areas for which it has recognition.
Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the
scope of recognition of TUVRNA, subject to the limitation and
conditions specified above.
III. Authority and Signature
Loren Sweatt, Principal Deputy Assistant Secretary of Labor for
Occupational Safety and Health, authorized the preparation of this
notice. Accordingly, the agency is issuing this notice pursuant to 29
U.S.C. 657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912,
Jan. 25, 2012), and 29 CFR 1910.7.
Signed at Washington, DC, on September 25, 2019.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor for Occupational Safety
and Health.
[FR Doc. 2019-21235 Filed 9-30-19; 8:45 am]
BILLING CODE 4510-26-P