[Federal Register Volume 84, Number 140 (Monday, July 22, 2019)]
[Notices]
[Pages 35069-35073]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-15510]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[C-570-968]
Aluminum Extrusions From the People's Republic of China: Final
Results of Countervailing Duty Administrative Review and Rescission of
Review, in Part; 2017
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce (Commerce) determines that
exporters and/or producers subject to this administrative review
received countervailable subsidies during the period of review (POR)
January 1, 2017 through December 31, 2017.
DATES: Applicable July 22, 2019.
FOR FURTHER INFORMATION CONTACT: Davina Friedmann AD/CVD Operations,
Office VI, Enforcement and Compliance, International Trade
Administration, U.S. Department of Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230; telephone: (202) 482-0698.
SUPPLEMENTARY INFORMATION:
Background
Commerce published the Preliminary Results of this administrative
review in the Federal Register on March 15, 2019.\1\ We invited parties
to comment on the Preliminary Results. No interested party submitted
comments or requested a hearing in this administrative review. Commerce
conducted this review in accordance with section 751(a)(1)(A) of the
Tariff Act of 1930, as amended (the Act).
---------------------------------------------------------------------------
\1\ See Aluminum Extrusions from the People's Republic of China:
Preliminary Results of the Countervailing Duty Administrative
Review, Rescission of Review, in Part, and Intent to Rescind, in
Part; 2017, 84 FR 9487 (March 15, 2019) (Preliminary Results) and
accompanying Preliminary Decision Memorandum.
---------------------------------------------------------------------------
Commerce exercised its discretion to toll all deadlines affected by
the partial federal government closure from December 22, 2018 through
the resumption of operations on January 29, 2019.\2\ If the new
deadline falls on a non-business day, in accordance with Commerce's
practice, the deadline will become the next business day. Accordingly,
the revised deadline for the final results of this administrative
review is now July 15, 2019.
---------------------------------------------------------------------------
\2\ See Memorandum to the Record from Gary Taverman, Deputy
Assistant Secretary for Antidumping and Countervailing Duty
Operations, performing the non-exclusive functions and duties of the
Assistant Secretary for Enforcement and Compliance, ``Deadlines
affected by the Partial Shutdown of the Federal Government,'' dated
January 28, 2019. All deadlines in this segment of the proceeding
have been extended by 40 days.
---------------------------------------------------------------------------
Scope of the Order
The product covered by the Order is aluminum extrusions from the
People's Republic of China. The complete description of the scope is
provided at Appendix I of this notice.
Methodology
For each of the subsidy programs we found to be countervailable, we
determined that there is a subsidy, i.e., a government-provided
financial contribution that gives rise to a benefit to the recipient,
and that the subsidy is
[[Page 35070]]
specific.\3\ For additional details, see the Preliminary Results and
accompanying Preliminary Decision Memorandum.
---------------------------------------------------------------------------
\3\ See sections 771(5)(B) and (D) of the Act regarding
financial contribution, section 771(5)(E) of the Act regarding
benefit, and section 771(5A) of the Act regarding specificity.
---------------------------------------------------------------------------
Changes Since the Preliminary Results
As no party submitted comments on the methodology used in
calculating the adverse facts available subsidy rates assigned in the
Preliminary Results, Commerce made no adjustments to that methodology
in the final results of this review.
Rescission of Review
In the Preliminary Results, we stated our intention to rescind the
review with respect to companies named in the Initiation Notice for
which all review requests were timely withdrawn in accordance with 19
CFR 351.213(d)(1). These companies are listed in the Appendix II to
this notice. No interested party commented on our intent to rescind
with respect to these companies. Therefore, we are rescinding the
administrative review of the countervailing duty order on aluminum
extrusions from China, in part, covering the period January 1, 2017
through December 31, 2017, for the companies listed in Appendix II. For
these companies, Commerce will assess duties at rates equal to the
rates of the cash deposits for estimated countervailing duties required
at the time of entry, or withdrawn from warehouse, for consumption,
during the POR, in accordance with 19 CFR 351.212(c)(2).\4\
---------------------------------------------------------------------------
\4\ See Preliminary Results, 84 FR at 9485, 9487.
---------------------------------------------------------------------------
Final Results of Administrative Review
In accordance with 19 CFR 351.221(b)(5), we determine the following
final net subsidy rates for the 2017 administrative review: \5\
---------------------------------------------------------------------------
\5\ See Preliminary Results; see also Memorandum,
``Administrative Review of Countervailing Duty Order on Aluminum
Extrusions from the People's Republic of China: AFA Calculation
Memorandum for the Final Results of Review; 2017.''
------------------------------------------------------------------------
Final ad
Company valorem
rate
------------------------------------------------------------------------
Anshan Zhongjda Industry Co. Ltd........................... 216.61
Foshan Sanshui Fenglu Aluminum Co.......................... 216.61
Jangho Curtain Wall Hong Kong Ltd.......................... 216.61
Sihui Shi Guoyao Aluminum Co., Ltd......................... 216.61
Sincere Profit Ltd......................................... 216.61
------------------------------------------------------------------------
Assessment Rates
Commerce intends to issue appropriate assessment instructions
directly to Customs and Border Protection (CBP), 15 days after
publication of these final results of review, to liquidate shipments of
subject merchandise entered, or withdrawn from warehouse, for
consumption on or after January 1, 2017 through December 31, 2017, at
the ad valorem rates listed above.
Cash Deposit Requirements
Commerce also intends to instruct CBP to collect cash deposits of
estimated countervailing duties in the amounts indicated above for each
company listed on shipments of subject merchandise entered, or
withdrawn from warehouse, for consumption on or after the date of
publication of the final results of this administrative review. For all
non-reviewed firms, we will instruct CBP to collect cash deposits of
estimated countervailing duties at the most recent company-specific or
all-others rate applicable to the company, as appropriate. Accordingly,
the cash deposit requirements that will be applied to companies covered
by this order, but not examined in this administrative review, are
those established in the most recently completed segment of the
proceeding for each company. These cash deposit requirements, when
imposed, shall remain in effect until further notice.
Administrative Protective Order
This notice serves as a reminder to parties subject to
administrative protective order (APO) of their responsibility
concerning the disposition of proprietary information disclosed under
APO in accordance with 19 CFR 351.305(a)(3). Timely written
notification of return or destruction of APO materials or conversion to
judicial protective order is hereby requested. Failure to comply with
the regulations and the terms of an APO is a sanctionable violation.
Notification to Interested Parties
We are issuing and publishing these results in accordance with
sections 751(a)(1) and 777(i)(1) of the Act.
Dated: July 15, 2019.
Jeffrey I. Kessler,
Assistant Secretary for Enforcement and Compliance.
Appendix I
The merchandise covered by the order is aluminum extrusions
which are shapes and forms, produced by an extrusion process, made
from aluminum alloys having metallic elements corresponding to the
alloy series designations published by The Aluminum Association
commencing with the numbers 1, 3, and 6 (or proprietary equivalents
or other certifying body equivalents). Specifically, the subject
merchandise made from aluminum alloy with an Aluminum Association
series designation commencing with the number 1 contains not less
than 99 percent aluminum by weight. The subject merchandise made
from aluminum alloy with an Aluminum Association series designation
commencing with the number 3 contains manganese as the major
alloying element, with manganese accounting for not more than 3.0
percent of total materials by weight. The subject merchandise is
made from an aluminum alloy with an Aluminum Association series
designation commencing with the number 6 contains magnesium and
silicon as the major alloying elements, with magnesium accounting
for at least 0.1 percent but not more than 2.0 percent of total
materials by weight, and silicon accounting for at least 0.1 percent
but not more than 3.0 percent of total materials by weight. The
subject aluminum extrusions are properly identified by a four-digit
alloy series without either a decimal point or leading letter.
Illustrative examples from among the approximately 160 registered
alloys that may characterize the subject merchandise are as follows:
1350, 3003, and 6060.
Aluminum extrusions are produced and imported in a wide variety
of shapes and forms, including, but not limited to, hollow profiles,
other solid profiles, pipes, tubes, bars, and rods. Aluminum
extrusions that are drawn subsequent to extrusion (drawn aluminum)
are also included in the scope.
Aluminum extrusions are produced and imported with a variety of
finishes (both coatings and surface treatments), and types of
fabrication. The types of coatings and treatments applied to subject
aluminum extrusions include, but are not limited to, extrusions that
are mill finished (i.e., without any coating or further finishing),
brushed, buffed, polished, anodized (including brightdip anodized),
liquid painted, or powder coated. Aluminum extrusions may also be
fabricated, i.e., prepared for assembly. Such operations would
include, but are not limited to, extrusions that are cut-to-length,
machined, drilled, punched, notched, bent, stretched, knurled,
swedged, mitered, chamfered, threaded, and spun. The subject
merchandise includes aluminum extrusions that are finished (coated,
painted, etc.), fabricated, or any combination thereof.
Subject aluminum extrusions may be described at the time of
importation as parts for final finished products that are assembled
after importation, including, but not limited to, window frames,
door frames, solar panels, curtain walls, or furniture. Such parts
that otherwise meet the definition of aluminum extrusions are
included in the scope. The scope includes the aluminum extrusion
components that are attached (e.g., by welding or fasteners) to form
subassemblies, i.e., partially assembled merchandise unless imported
as part of the finished goods `kit' defined further below. The scope
does not include the non-aluminum extrusion components of
subassemblies or subject kits.
Subject extrusions may be identified with reference to their end
use, such as fence
[[Page 35071]]
posts, electrical conduits, door thresholds, carpet trim, or heat
sinks (that do not meet the finished heat sink exclusionary language
below). Such goods are subject merchandise if they otherwise meet
the scope definition, regardless of whether they are ready for use
at the time of importation. The following aluminum extrusion
products are excluded: Aluminum extrusions made from aluminum alloy
with an Aluminum Association series designations commencing with the
number 2 and containing in excess of 1.5 percent copper by weight;
aluminum extrusions made from aluminum alloy with an Aluminum
Association series designation commencing with the number 5 and
containing in excess of 1.0 percent magnesium by weight; and
aluminum extrusions made from aluminum alloy with an Aluminum
Association series designation commencing with the number 7 and
containing in excess of 2.0 percent zinc by weight.
The scope also excludes finished merchandise containing aluminum
extrusions as parts that are fully and permanently assembled and
completed at the time of entry, such as finished windows with glass,
doors with glass or vinyl, picture frames with glass pane and
backing material, and solar panels. The scope also excludes finished
goods containing aluminum extrusions that are entered unassembled in
a ``finished goods kit.'' A finished goods kit is understood to mean
a packaged combination of parts that contains, at the time of
importation, all of the necessary parts to fully assemble a final
finished good and requires no further finishing or fabrication, such
as cutting or punching, and is assembled ``as is'' into a finished
product. An imported product will not be considered a ``finished
goods kit'' and therefore excluded from the scope of the orders
merely by including fasteners such as screws, bolts, etc. in the
packaging with an aluminum extrusion product.
The scope also excludes aluminum alloy sheet or plates produced
by other than the extrusion process, such as aluminum products
produced by a method of casting. Cast aluminum products are properly
identified by four digits with a decimal point between the third and
fourth digit. A letter may also precede the four digits. The
following Aluminum Association designations are representative of
aluminum alloys for casting: 208.0, 295.0, 308.0, 355.0, C355.0,
356.0, A356.0, A357.0, 360.0, 366.0, 380.0, A380.0, 413.0, 443.0,
514.0, 518.1, and 712.0. The scope also excludes pure, unwrought
aluminum in any form.
The scope also excludes collapsible tubular containers composed
of metallic elements corresponding to alloy code 1080A as designated
by the Aluminum Association where the tubular container (excluding
the nozzle) meets each of the following dimensional characteristics:
(1) Length of 37 millimeters (``mm'') or 62 mm, (2) outer diameter
of 11.0 mm or 12.7 mm, and (3) wall thickness not exceeding 0.13 mm.
Also excluded from the scope of this order are finished heat
sinks. Finished heat sinks are fabricated heat sinks made from
aluminum extrusions the design and production of which are organized
around meeting certain specified thermal performance requirements
and which have been fully, albeit not necessarily individually,
tested to comply with such requirements.
Imports of the subject merchandise are provided for under the
following categories of the Harmonized Tariff Schedule of the United
States (HTSUS): 8541.90.00.00, 8708.10.30.50, 8708.99.68.90,
6603.90.8100, 7616.99.51, 8479.89.94, 8481.90.9060, 8481.90.9085,
9031.90.9195, 8424.90.9080, 9405.99.4020, 9031.90.90.95,
7616.10.90.90, 7609.00.00, 7610.10.00, 7610.90.00, 7615.10.30,
7615.10.71, 7615.10.91, 7615.19.10, 7615.19.30, 7615.19.50,
7615.19.70, 7615.19.90, 7615.20.00, 7616.99.10, 7616.99.50,
8479.89.98, 8479.90.94, 8513.90.20, 9403.10.00, 9403.20.00,
7604.21.00.00, 7604.29.10.00, 7604.29.30.10, 7604.29.30.50,
7604.29.50.30, 7604.29.50.60, 7608.20.00.30, 7608.20.00.90,
8302.10.30.00, 8302.10.60.30, 8302.10.60.60, 8302.10.60.90,
8302.20.00.00, 8302.30.30.10, 8302.30.30.60, 8302.41.30.00,
8302.41.60.15, 8302.41.60.45, 8302.41.60.50, 8302.41.60.80,
8302.42.30.10, 8302.42.30.15, 8302.42.30.65, 8302.49.60.35,
8302.49.60.45, 8302.49.60.55, 8302.49.60.85, 8302.50.00.00,
8302.60.90.00, 8305.10.00.50, 8306.30.00.00, 8414.59.60.90,
8415.90.80.45, 8418.99.80.05, 8418.99.80.50, 8418.99.80.60,
8419.90.10.00, 8422.90.06.40, 8473.30.20.00, 8473.30.51.00,
8479.90.85.00, 8486.90.00.00, 8487.90.00.80, 8503.00.95.20,
8508.70.00.00, 8515.90.20.00, 8516.90.50.00, 8516.90.80.50,
8517.70.00.00, 8529.90.73.00, 8529.90.97.60, 8536.90.80.85,
8538.10.00.00, 8543.90.88.80, 8708.29.50.60, 8708.80.65.90,
8803.30.00.60, 9013.90.50.00, 9013.90.90.00, 9401.90.50.81,
9403.90.10.40, 9403.90.10.50, 9403.90.10.85, 9403.90.25.40,
9403.90.25.80, 9403.90.40.05, 9403.90.40.10, 9403.90.40.60,
9403.90.50.05, 9403.90.50.10, 9403.90.50.80, 9403.90.60.05,
9403.90.60.10, 9403.90.60.80, 9403.90.70.05, 9403.90.70.10,
9403.90.70.80, 9403.90.80.10, 9403.90.80.15, 9403.90.80.20,
9403.90.80.41, 9403.90.80.51, 9403.90.80.61, 9506.11.40.80,
9506.51.40.00, 9506.51.60.00, 9506.59.40.40, 9506.70.20.90,
9506.91.00.10, 9506.91.00.20, 9506.91.00.30, 9506.99.05.10,
9506.99.05.20, 9506.99.05.30, 9506.99.15.00, 9506.99.20.00,
9506.99.25.80, 9506.99.28.00, 9506.99.55.00, 9506.99.60.80,
9507.30.20.00, 9507.30.40.00, 9507.30.60.00, 9507.90.60.00, and
9603.90.80.50.
The subject merchandise entered as parts of other aluminum
products may be classifiable under the following additional Chapter
76 subheadings: 7610.10, 7610.90, 7615.19, 7615.20, and 7616.99, as
well as under other HTSUS chapters. In addition, fin evaporator
coils may be classifiable under HTSUS numbers: 8418.99.80.50 and
8418.99.80.60. While HTSUS subheadings are provided for convenience
and customs purposes, the written description of the scope of this
order is dispositive.
Appendix II
List of Companies for Which We Are Rescinding This Administrative
Review
1. Acro Import and Export Co.
2. Activa International Inc.
3. Activa Leisure Inc.
4. Allied Maker Limited
5. Alnan Aluminum Co., Ltd.
6. Alnan Aluminum Ltd.
7. Aluminicaste Fundicion de Mexico
8. AMC Ltd.
9. AMC Limited
10. Anji Chang Hong Chain Manufacturing
11. Aoda Aluminum (Hong Kong) Co., Limited
12. AsiaAlum Group
13. Atlas Integrated Manufacturing Ltd.
14. Belton (Asia) Development Limited
15. Belton (Asia) Development Ltd.
16. Birchwoods (Lin'an) Leisure Products Co., Ltd.
17. Bolnar Hong Kong Ltd.
18. Bracalente Metal Products (Suzhou) Co., Ltd.
19. Brilliance General Equipment Co., Ltd.
20. Changshu Changshen Aluminum Products Co., Ltd.
21. Changshu Changsheng Aluminum Products Co., Ltd.
22. Changzhou Changzhen Evaporator Co., Ltd.
23. Changzhou Changzheng Evaporator Co., Ltd.
24. Changzhou Tenglong Auto Accessories Manufacturing Co. Ltd
25. Changzhou Tenglong Auto Parts Co., Ltd.
26. Changzhou Tenglong Auto Parts Co Ltd
27. China Square
28. China Square Industrial Co.
29. China Square Industrial Ltd.
30. China Zhongwang Holdings, Ltd.
31. Chiping One Stop Industrial & Trade Co., Ltd.
32. Classic & Contemporary Inc.
33. Clear Sky Inc.
34. Cosco (J.M.) Aluminum Co., Ltd.
35. Cosco (JM) Aluminum Development Co. Ltd
36. Dalian Huacheng Aquatic Products
37. Dalian Liwang Trade Co., Ltd.
38. Danfoss Micro Channel Heat Exchanger (Jia Xing) Co., Ltd.
39. Daya Hardware Co. Ltd.
40. Dongguan Dazhan Metal Co., Ltd.
41. Dongguang Aoda Aluminum Co., Ltd.
42. Dongguan Golden Tiger Hardware Industrial Co., Ltd.
43. Dragonluxe Limited
44. Dynabright International Group (HK) Ltd.
45. Dynamic Technologies China
46. ETLA Technology (Wuxi) Co. Ltd.
47. Ever Extend Ent. Ltd.
48. Fenghua Metal Product Factory
49. First Union Property Limited
50. FookShing Metal & Plastic Co. Ltd.
51. Foreign Trade Co. of Suzhou New & High-Tech Industrial
Development Zone
52. Foshan City Nanhai Hongjia Aluminum Alloy Co., Ltd.
53. Foshan Golden Source Aluminum Products Co., Ltd.
54. Foshan Guangcheng Aluminium Co., Ltd
55. Foshan Jinlan Aluminum Co. Ltd.
56. Foshan JinLan Aluminum Co., Ltd.
57. Foshan JMA Aluminum Company Limited
58. Foshan Nanhai Niu Yuan Hardware Product Co., Ltd.
59. Foshan Shunde Aoneng Electrical Appliances Co., Ltd
60. Foshan Yong Li Jian Aluminum Co., Ltd.
61. Fujian Sanchuan Aluminum Co., Ltd.
62. Fukang Aluminum & Plastic Import and Export Co., Ltd.
[[Page 35072]]
63. Fuzhou Sunmodo New Energy Equipment
64. Gaotang Xinhai Economy & Trade Co., Ltd.
65. Genimex Shanghai, Ltd.
66. Global Hi-Tek Precision Co. Ltd
67. Global PMX Dongguan Co., Ltd.
68. Global Point Technology (Far East) Limited
69. Gold Mountain International Development, Ltd.
70. Golden Dragon Precise Copper Tube Group, Inc.
71. Gran Cabrio Capital Pte. Ltd.
72. Gree Electric Appliances
73. GT88 Capital Pte. Ltd.
74. Guang Ya Aluminium Industries Co. Ltd.
75. Guang Ya Aluminum Industries Company Ltd
76. Guang Ya Aluminium Industries (HK) Ltd.
77. Guangcheng Aluminum Co., Ltd.
78. Guangdong Hao Mei Aluminum Co., Ltd.
79. Guangdong Jianmei Aluminum Profile Company Limited
80. Guangdong JMA Aluminum Profile Factory (Group) Co., Ltd.
81. Guangdong Midea
82. Guangdong Midea Microwave and Electrical Appliances
83. Guangdong Nanhai Foodstuffs Imp. & Exp. Co., Ltd.
84. Guangdong Weiye Aluminum Factory Co., Ltd.
85. Guangdong Whirlpool Electrical Appliances Co., Ltd.
86. Guangdong Xingfa Aluminum Co., Ltd.
87. Guangdong Xin Wei Aluminum Products Co., Ltd.
88. Guangdong Yonglijian Aluminum Co., Ltd.
89. Guangdong Zhongya Aluminum Company Ltd.
90. Guangzhou Jangho Curtain Wall System Engineering Co., Ltd.
91. Guangzhou Mingcan Die-Casting Hardware Products Co., Ltd.
92. Hangzhou Xingyi Metal Products Co., Ltd.
93. Hanwood Enterprises Limited
94. Hanyung Alcoba Co., Ltd.
95. Hanyung Alcobis Co., Ltd.
96. Hanyung Metal (Suzhou) Co., Ltd.
97. Hao Mei Aluminum Co., Ltd.
98. Hao Mei Aluminum International Co., Ltd.
99. Hebei Xusen Wire Mesh Products Co., Ltd.
100. Henan New Kelong Electrical Appliances Co., Ltd.
101. Henan Zhongduo Aluminum Magnesium New Material Co., Ltd.
102. Hong Kong Gree Electric Appliances Sales Limited
103. Hong Kong Modern Non-Ferrous Metal
104. Honsense Development Company
105. Houztek Architectural Products Co., Ltd.
106. Hui Mei Gao Aluminum Foshan Co., Ltd.
107. Huixin Aluminum
108. IDEX Dinglee Technology (Tianjin) Co., Ltd.
109. IDEX Health
110. IDEX Technology Suzhou Co., Ltd.
111. Innovative Aluminum (Hong Kong) Limited
112. iSource Asia
113. Jackson Travel Products Co., Ltd.
114. Jiangmen Jianghai District Foreign Economic Enterprise Corp.
Ltd.
115. Jiangmen Jianghai Foreign Ent. Gen.
116. Jiangmen Qunxing Hardware Diecasting Co., Ltd.
117. Jiangsu Changfa Refrigeration Co.
118. Jiangyin Suncitygaylin
119. Jiangyin Trust International Inc.
120. Jiangyin Xinhong Doors and Windows Co., Ltd.
121. Jiaxing Jackson Travel Products Co., Ltd.
122. Jiaxing Taixin Metal Products Co., Ltd.
123. Jiuyan Co., Ltd.
124. JMA (HK) Company Limited
125. Johnson Precision Engineering (Suzhou) Co., Ltd.
126. Justhere Co., Ltd.
127. Kam Kiu Aluminum Products Sdn Bhd
128. Kanal Precision Aluminum Product Co., Ltd.
129. Karlton Aluminum Company Ltd.
130. Kong Ah International Company Limited
131. Kromet International Inc.
132. Kromet Intl Inc.
133. Kromet International
134. Kunshan Giant Light Metal Technology Co., Ltd.
135. Liaoning Zhong Da Industrial Aluminum Co., Ltd.
136. Liaoning Zhongwang Group Co., Ltd.
137. Liaoyang Zhongwang Aluminum Profile Co. Ltd.
138. Longkou Donghai Trade Co., Ltd.
139. Metal Tech Co Ltd.
140. Metaltek Group Co., Ltd.
141. Metaltek Metal Industry Co., Ltd.
142. Midea Air Conditioning Equipment Co., Ltd.
143. Midea Electric Trading Co., Pte Ltd.
144. Midea International Trading Co., Ltd.
145. Midea International Training Co., Ltd.
146. Miland Luck Limited
147. Nanhai Textiles Import & Export Co., Ltd.
148. New Asia Aluminum & Stainless Steel Product Co., Ltd.
149. New Zhongya Aluminum Factory
150. Nidec Sankyo (Zhejang) Corporation
151. Nidec Sankyo Zhejiang Corporation
152. Nidec Sankyo Singapore Pte. Ltd.
153. Ningbo Coaster International Co., Ltd.
154. Ningbo Hi Tech Reliable Manufacturing Company
155. Ningbo Innopower Tengda Machinery
156. Ningbo Ivy Daily Commodity Co., Ltd.
157. Ningbo Yili Import and Export Co., Ltd.
158. North China Aluminum Co., Ltd.
159. North Fenghua Aluminum Ltd.
160. Northern States Metals
161. PanAsia Aluminum (China) Limited
162. Pengcheng Aluminum Enterprise Inc.
163. Permasteelisa Hong Kong Limited
164. Permasteelisa South China Factory
165. Pingguo Aluminum Company Limited
166. Pingguo Asia Aluminum Co., Ltd.
167. Popular Plastics Company Limited
168. Precision Metal Works Ltd.
169. Press Metal International Ltd.
170. Samuel, Son & Co., Ltd.
171. Sanchuan Aluminum Co., Ltd.
172. Sanhua (Hangzhou) Micro Channel Heat Exchanger Co., Ltd.
173. Shandong Fukang Aluminum & Plastic Co. LTD.
174. Shandong Huajian Aluminum Group
175. Shangdong Huasheng Pesticide Machinery Co.
176. Shangdong Nanshan Aluminum Co., Ltd.
177. Shanghai Automobile Air-Conditioner Accessories Co Ltd.
178. Shanghai Automobile Air Conditioner Accessories Ltd.
179. Shanghai Canghai Aluminum Tube Packaging Co., Ltd.
180. Shanghai Dofiberone Composites Co. Ltd.
181. Shanghai Dongsheng Metal
182. Shanghai Shen Hang Imp & Exp Co., Ltd.
183. Shanghai Tongtai Precise Aluminum Alloy Manufacturing Co. Ltd.
184. Shanghai Top-Ranking Aluminum Products Co., LTD.
185. Shanghai Top-Ranking New Materials Co., Ltd.
186. Shenyang Yuanda Aluminum Industry Engineering Co. Ltd.
187. Shenzhen Hudson Technology Development Co.
188. Shenzhen Jiuyuan Co., Ltd.
189. Skyline Exhibit Systems (Shanghai) Co. Ltd.
190. Southwest Aluminum (Group) Co., Ltd.
191. Summit Heat Sinks Metal Co., Ltd.
192. Summit Plastics Nanjing Co. Ltd.
193. Suzhou JRP Import & Export Co., Ltd.
194. Suzhou New Hongji Precision Part Co.
195. Tai-Ao Aluminum (Taishan) Co. Ltd.
196. Taishan City Kam Kiu Aluminium Extrusion Co., Ltd.
197. Taitoh Machinery Shanghai Co. Ltd.
198. Taizhou Lifeng Manufacturing Co., Ltd.
199. Tiazhou Lifeng Manufacturing Corporation
200. Taizhou United Imp. & Exp. Co., Ltd.
201. tenKsolar (Shanghai) Co., Ltd.
202. Tianjin Ganglv Nonferrous Metal Materials Co., Ltd.
203. Tianjin Jinmao Import & Export Corp., Ltd.
204. Tianjin Ruxin Electric Heat Transmission Technology Co., Ltd.
205. Tianjin Xiandai Plastic & Aluminum Products Co., Ltd.
206. Top-Wok Metal Co., Ltd.
207. Traffic Brick Network, LLC
208. Union Aluminum (SIP) Co.
209. Union Industry (Asia) Co., Ltd.
210. USA Worldwide Door Components (Pinghu) Co., Ltd.
211. Wenzhou Shengbo Decoration & Hardware
212. Wenzhou Yongtai Electric Co., Ltd.
213. Whirlpool (Guangdong)
214. Whirlpool Canada L.P.
215. Whirlpool Microwave Products Development Ltd.
216. Worldwide Door Components, Inc.
217. WTI Building Products, Ltd.
218. Wuxi Lutong Fiberglass Doors Co., Ltd.
219. Xin Wei Aluminum Co.
220. Xin Wei Aluminum Company Limited
221. Xinya Aluminum & Stainless Steel Product Co., Ltd.
222. Yuyao Fanshun Import & Export Co., Ltd.
223. Yuyao Haoshen Import & Export
224. Zahoqing China Square Industry
[[Page 35073]]
Limited
225. Zhaoqing Asia Aluminum Factory Company Ltd.
226. Zhaoqing China Square Industrial Ltd.
227. Zhaoqing China Square Industry Limited
228. Zhaoqing New Zhongya Aluminum Co., Ltd.
229. Zhejiang Anji Xinxiang Aluminum Co., Ltd.
230. Zhejiang Lilies Industrial and Commercial Co.
231. Zhejiang Yili Automobile Air Condition Co., Ltd.
232. Zhejiang Yongkang Listar Aluminum Industry Co., Ltd.
233. Zhejiang Zhengte Group Co., Ltd.
234. Zhenjiang Xinlong Group Co., Ltd.
235. Zhongshan Daya Hardware Co., Ltd.
236. Zhongshan Gold Mountain Aluminum Factory Ltd.
237. Zhongya Shaped Aluminum (HK) Holding Limited
238. Zhuhai Runxingtai Electrical Equipment Co., Ltd.
[FR Doc. 2019-15510 Filed 7-19-19; 8:45 am]
BILLING CODE 3510-DS-P