[Federal Register Volume 84, Number 129 (Friday, July 5, 2019)]
[Notices]
[Pages 32161-32168]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-14273]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[PA-HQ-OPPT-2019-0075; FRL-9992-78]
Certain New Chemicals; Receipt and Status Information for April
2019
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 04/01/
2019 to 04/30/2019.
DATES: Comments identified by the specific case number provided in this
document must be received on or before August 5, 2019.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2019-0075, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at http://www.epa.gov/dockets/contacts.html. Additional
instructions on commenting or visiting the docket, along with more
information about dockets generally, is available at http://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, Information Management Division (7407M), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number:
(202) 564-8593; email address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 04/01/2019 to 04/30/2019. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs
[[Page 32162]]
to manufacture a new chemical substance; and a periodic status report
on new chemical substances that are currently under EPA review or have
recently concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be
either an ``existing'' chemical substance or a ``new'' chemical
substance. Any chemical substance that is not on EPA's TSCA Inventory
of Chemical Substances (TSCA Inventory) is classified as a ``new
chemical substance,'' while a chemical substance that is listed on the
TSCA Inventory is classified as an ``existing chemical substance.''
(See TSCA section 3(11).) For more information about the TSCA Inventory
go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: http://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the date the notice
passed an initial screening by EPA staff, the submitting manufacturer
(i.e., domestic producer or importer), the potential uses identified by
the manufacturer in the notice, and the chemical substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
[[Page 32163]]
Table I--PMN/SNUN/MCANs Approved * From 04/01/2019 to 04/30/2019
----------------------------------------------------------------------------------------------------------------
Case No. Version Received date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
J-19-0021........... 1 4/3/2019 CBI................. (S) Ethanol (G) Saccharomyces
production. cerevisiae strain.
J-19-0022........... 1 4/3/2019 CBI................. (S) Ethanol (G) Saccharomyces
production. cerevisiae strain.
P-16-0326A.......... 4 4/1/2019 Firmenich, Inc...... (G) As part of a (S) Propanoic acid,
fragrance formula. 2,2-dimethyl-,-1-
methyl-2-(1-
methylethoxy)-2-
oxoethyl ester.
P-16-0425A.......... 3 3/25/2019 CBI................. (G) A chemical (G) Amino-silane.
reactant used in
manufacturing a
polymer.
P-16-0429A.......... 4 4/23/2019 CBI................. (G) Universal tint (G) Endcapped
paste resin having polysiloxane.
high solids.
P-16-0470A.......... 2 3/29/2019 Firmenich, Inc...... (G) As part of a (S) 2,7-Nonadien-4-
fragrance formula. ol, 4,8-dimethyl-.
P-17-0152A.......... 7 3/27/2019 CBI................. (G) Additive in-home (G) Poly-(2-methyl-1-
care products. oxo-2-propen-1-yl)
ester with
Ethanaminium, N,N,N-
trialkyl, chloride
and methoxypoly(oxy-
1,2-ethanediyl).
P-17-0220A.......... 3 3/26/2019 CBI................. (G) Additive, open, (G) 2-Oxepanone,
non-dispersive use. reaction products
with
alkylenediamine-
alkyleneimine
polymer, 2-[[(2-
alkyl)oxy]alkyl]oxi
rane and tetrahydro-
2H-pyran-2-one.
P-17-0239A.......... 5 3/26/2019 CBI................. (G) Adhesive for (G) Substituted
open non- carboxylic acid,
descriptive use. polymer with 2,4-
diisocyanato-1-
methylbenzene,
hexanedioic acid,
alpha-hydro-omega-
hydroxypoly[oxy(met
hyl-1,2-
ethanediyl)], 1,1'-
methylenebis[4-
isocyanatobenzene],
2,2'-
oxybis[ethanol],
1,1'-oxybis[2-
propanol] and 1,2-
propanediol.
P-17-0245A.......... 6 4/9/2019 CBI................. (G) Adhesive for (G) Unsaturated
open, non- polyfluoro ester.
dispersive use.
P-17-0249A.......... 5 4/22/2019 CBI................. (G) Open, dispersive (G) Acid-
use. neutralized, amine-
functional acrylic
polymer.
P-17-0253A.......... 3 4/16/2019 CBI................. (G) The polymer will (G) Oxirane, 2-
be produced and methyl-, polymer
sold to the with oxirane,
customer in liquid methyl 2-
form. Customers (substituted
will then blend the carbomonocycle
polymer to enhance isoquinolin-2(3H)-
formulation yl) propyl ether.
solubilization
Properties.
P-17-0380A.......... 3 4/22/2019 CBI................. (G) Open, non- (G) Amine- and
dispersive use. hydroxy-functional
acrylic polymer.
P-17-0381A.......... 3 4/22/2019 CBI................. (G) Open, non- (G) Hydroxy acrylic
dispersive use. polymer,
methanesulfonates.
P-17-0396A.......... 4 4/5/2019 CBI................. (S) Intermediate for (G) Aminoalkylated
a polyurethane imidazole.
catalyst.
P-18-0010A.......... 3 4/5/2019 CBI................. (S) Polyurethane (G) Aminoalkylated
catalyst. imidazole, N-Me
derivs.
P-18-0084A.......... 5 4/2/2019 ShayoNano USA, Inc.. (S) Additive for (S) Silicon zinc
paints and coatings. oxide.
P-18-0086A.......... 2 4/5/2019 CBI................. (S) Intermediate for (G) Propanenitrile,
a polyurethane polyalkylpolyamine.
catalyst.
P-18-0091A.......... 3 4/17/2019 Resinate Materials (S) Intermediate for (G) Vegetable oil,
Group, Inc. use in the polymers with
manufacture of diethylene glycol-
polymers. and polyol- and
polyethylene glycol-
depolymd.
poly(ethylene
terephthalate)
waste plastics and
arylcarboxylic acid
anhydride.
P-18-0101A.......... 5 3/22/2019 CBI................. (G) Industrial...... (G) Pentaerythritol,
mixed esters with
linear and branched
fatty acids.
P-18-0122A.......... 5 4/10/2019 Polymer Ventures, (G) Paper additive.. (G) Alkylamide,
Inc. polymer with
alkylamine,
formaldehyde, and
polycyanamide,
alkyl acid salt.
P-18-0151A.......... 4 4/1/2019 Struers, Inc........ (S) A curing agent (S) Formaldehyde,
for curing epoxy reaction products
systems. with 1,3-
benzenedimethanamin
e and p-tert-
butylphenol.
P-18-0154A.......... 6 4/5/2019 CBI................. (G) Crosslinking (G) Isocyanic acid,
agent for coatings. polyalkylenepolycyc
loalkylene ester, 2-
alkoxy alkanol and
1-alkoxy alkanol
and alkylene diol
blocked.
P-18-0168A.......... 4 3/22/2019 CBI................. (G) Color additive.. (G) Alkoxylated
triaryl methane.
P-18-0174A.......... 2 4/16/2019 CBI................. (G) Oilfield (G) Enzyme.
applications.
P-18-0188A.......... 2 4/11/2019 Allnex USA, Inc..... (S) Adhesion and (G) Alkyl
scratch resistance. substituted
alkenoic acid,
alkyl ester,
polymer with
alkanediol alkyl-
alkenoate, reaction
products with
alkenoic acid,
isocyanato-
(isocyanatoalkyl)-
alkyl substituted
carbomonocycle and
substituted
alkanediol.
P-18-0228A.......... 3 3/26/2019 CBI................. (G) Tackifier....... (G) Branched alkenyl
acid, alkyl ester,
homopolymer.
P-18-0229A.......... 3 3/26/2019 CBI................. (G) Tackifier....... (G) Modified
branched alkenyl
acid, alkyl ester,
homopolymer.
P-18-0237A.......... 7 3/23/2019 CBI................. (G) Use in print (G) Alkanediol,
resins. polymer with 5-
isocyanato-1-
(isocyanatomethyl)-
1,3,3-
trimethylcyclohexan
e, alkylaminoalkyl
methacrylate-, and
dialkylheteromonocy
cle-blocked.
P-18-0258A.......... 3 4/10/2019 CBI................. (G) Copolyamide for (G) Dioic acids,
Packaging Films; polymers with
(G) Copolyamide for caprolactam and
Monofilament; (G) alkyldiamines.
Copolyamide for
Molding Parts.
P-18-0259A.......... 3 4/10/2019 CBI................. (G) Copolyamide for (G) Fatty acids,
Packaging Films; dimers,
(G) Copolyamide for hydrogenated,
Monofilament; (G) polymers with
Copolyamide for caprolactam and
Molding Parts. alkyl diamine.
P-18-0266A.......... 3 4/9/2019 Sasol Chemicals (S) Additive, Rubber (S) Alkanes, C20-45
(USA), LLC. and Tire branched and
manufacturing; linear.
Additive, Casting
Wax; Thread
Lubricant.
P-18-0281A.......... 2 4/17/2019 CBI................. (G) Electrolyte (G) Cyclic sulfate.
additive.
[[Page 32164]]
P-18-0299A.......... 2 4/8/2019 CBI................. (G) Ink additive.... (G) Alkenoic acid,
alkyl-, polymers
with alkyl
methacrylate,
cycloalkyl
methacrylate,
alkylene
dimethacrylate, and
polyalkene glycol
hydrogen sulfate
[(branched
alkyloxy)alkyl]-
(alkenyloxy)alkyl
ethers ammonium
salts, metal salts.
P-18-0302A.......... 3 4/5/2019 CBI................. (G) Chemical (S) D-glucaric acid,
intermediate. ammonium salt
(1:1).
P-18-0305A.......... 2 4/23/2019 CBI................. (G) Component of ink (G) Alkenoic acid,
alkyl-,alkyl ester,
polymer with alkyl
alkenoate,
substituted
heteromonocycycle,
substituted
carbomonocycle,
substituted
alkanediol and
alkenoic acid,
alkali metal salt.
P-18-0312A.......... 4 3/29/2019 CBI................. (G) Dispersing agent (G) Formaldehyde,
polymer with 2-
phenoxyalkanol and
.alpha.-phenyl-
.omega.
hydroxypoly(oxy-1,2-
alkylnediyl),
dihydrogen
phosphate 2-
phenoxyalkyl
hydrogen phosphate,
alkaline salt.
P-18-0326A.......... 3 3/26/2019 CBI................. (G) Chemical (G) Alkanoic acid,
Intermediate. alkyl ester, manuf.
of, byproducts
from, distn.
residues.
P-18-0331A.......... 2 4/17/2019 Evonik Corporation.. (S) Substrate (S) Siloxanes and
wetting and anti- Silicones, di-Me, 3-
cratering additive (4-hydroxy-3-
for inks. methoxyphenyl)propy
l Me, ethoxylated
propoxylated.
P-18-0359A.......... 2 3/28/2019 CBI................. (G) Molded or (G) Methoxy Vinyl
extruded items. Ether-Vinylidene
Fluoride polymer.
P-18-0378A.......... 3 4/24/2019 CBI................. (G) Industrial (G) Acrylic and
coatings additive. Methacrylic acids
and esters, polymer
with
alkenylimidazole,
alkyl polyalkylene
glycol,
alkenylbenzene,
alkylbenzeneperoxoi
c acid ester
initiated, compds.
with
Dialkylaminoalkanol
.
P-18-0380A.......... 5 3/26/2019 CBI................. (G) Automotive brake (G) Butanoic acid
parts (contained ethyl amine.
use).
P-18-0383A.......... 3 3/27/2019 CBI................. (G) Coatings and (G) Dialkyl-
inks for commercial alkanediamine,
use. polymer with [(oxo-
alkenyl)oxy]poly(ox
y-alkanediyl)ether
with
bis(hydroxyalkyl)-
alkanediol.
P-18-0385A.......... 3 4/11/2019 Colonial Chemical, (S) Liquid Laundry.. (S) D-Glucopyranose,
Inc. oligomeric, Bu
glycosides polymers
with
epichlorohydrin, 2-
hydroxy-3-
sulfopropyl ethers,
sodium salts.
P-18-0398A.......... 2 4/5/2019 CBI................. (S) Intermediate.... (S) 1,2-
Ethanediamine, N-(1-
methylethyl)-N-[2-
[(1-
methylethyl)amino]e
thyl]-.
P-18-0402A.......... 4 4/24/2019 CBI................. (G) Fuel additive... (G) Phenol,
alkanepolyolbis(het
eroalkylene)bis-,
polyalkylene
derivs.
P-18-0404A.......... 6 3/25/2019 CBI................. (S) The substance is (G)
part of a mixture Alkylmultiheteroato
with other amines m,2-
to act as a functionalisedalkyl-
curative for a 2- 2-hydroxyalkyl-,
part epoxy polymer with
formulation. The alkylheteroatom-
intended use is the multialkylfunctiona
manufacture of wind lised
turbine blades. carbomonocylehetero
During manufacture atom and
of the blades this multiglycidylether
substance forms difunctionalised
part of the in-mold polyalkylene
coating system glycol.
which is applied to
the blade mold and
further laminated
with glass (or
carbon) reinforced
fibres (GRP). The
manufactured
structure is then
`cured' using heat
and a chemical
reaction occurs
forming a solid
composite
structure. The PMN
substance is
reacted during the
cure process into
the solid plastic
matrix and
therefore not
present in the
finished cured part.
Use of this product
will enhance the
life of renewable
energy source
provided by wind
turbines therefore
contributing to the
reduction in fossil
fuel usage.
P-18-0405A.......... 3 4/4/2019 CBI................. (G) Adhesive........ (S) Phenol, 4,4'-(1-
methylethylidene)bi
s-, polymer with
3,6,9,12-
tetraoxatetradeca-
1,13-diene,
glycidyl ether.
P-18-0406A.......... 3 3/28/2019 CBI................. (G) Initiator....... (G) Formaldehyde,
polymer with alkyl
aryl ketones.
P-18-0407A.......... 2 4/5/2019 CBI................. (S) Polyurethane (S) 1,2-
catalyst. Ethanediamine, N,N-
dimethyl-N-(1-
methylethyl)-N-[2-
[methyl(1-
methylethyl)amino]e
thyl]-.
P-19-0012A.......... 10 4/29/2019 CBI................. (S) Resin component (G)
for the Benzenedicarboxylic
polyisocyanurate; acid, rection
Resin component in products with
specialty isobenzofurandione
polyurethane kits and diethylene
and systems for glycol.
aerospace and
military
applications.
P-19-0020A.......... 4 4/29/2019 CBI................. (G) Lubricating (G) Alkylphenol,
additive. reaction products
with carbon
dioxide, distn.
residues from
manuf. of
alkylphenol derivs.
and calcium
alkylphenol derivs.
[[Page 32165]]
P-19-0024A.......... 2 4/8/2019 Sales And (S) Hot Mix Asphalt (S) Silsesquioxanes,
Distribution Application: The 3-
Services, Inc. PMN compound will (dimethyloctadecyla
be used as asphalt mmonio)propyl Me
additive for hot Pr, polymers with
mix (HMA) as well silicic acid
as cold mix (CMA) (H4Si04) tetra-Et
asphalt ester, (2-
applications; hydroxyethoxy)- and
Asphalt Emulsion methoxyterminated,
Application: The chlorides.
PMN substance is
water soluble and
can be used as an
asphalt emulsion in
road construction;
Waterproofing
Application: The
PMN substance is
expected to be used
in waterproofing of
building materials,
including
cementitious
material, masonry,
concrete, plaster,
bricks, etc.
P-19-0027A.......... 4 3/26/2019 Allnex USA, Inc..... (S) The PMN (G) Substituted
substance is an Carbomoncycle,
isolated polymer with
intermediate haloalkyl
incorporated as a substituted
component in heteromonocycle,
several allnex dialkyl-
coating resin alkanediamine and
products that are hydro-
only applied by hydroxypoly[oxy(alk
Cathodic ylalkanediyl)],
Electrodeposition reaction products
(CED) and used as with metal oxide
additives for and dialkanolamine,
corrosion acetates (salts).
protection.
P-19-0030A.......... 5 4/24/2019 CBI................. (G) Water Systems... (G) Triethanolamine
modified
Phosphinicocarboxyl
ates, sodium salts.
P-19-0031A.......... 6 3/27/2019 CBI................. (S) Curing agent for (G) Phenol, 4,4'-(1-
epoxy coating methylethylidene)bi
systems. s-, polymer with
formaldehyde, 2-
(chloromethyl)oxira
ne, alpha-hydro-
omega-
hydroxypoly(oxy-1,2-
ethanediyl), and
polyamines.
P-19-0034A.......... 4 4/11/2019 CBI................. (G) Contained use as (G) Metal, bis(2,4-
a component of pentanedionato-
tires. kO2,kO4)-, (T-4)-.
P-19-0035A.......... 4 3/28/2019 Firmenich, Inc...... (G) Fragrance....... (S) Acetamide, 2-(4-
methylphenoxy)-N-1H-
pyrazol-3-yl-N-(2-
thienylmethyl)-.
P-19-0036A.......... 2 3/28/2019 Ethox Chemicals, LLC (S) As an additive (S) 1,4-
to polymers for Benzenedicarboxylic
improvement in gas acid, 1,4-bis(2-
barrier performance. phenoxyethyl)
ester.
P-19-0045A.......... 2 4/3/2019 CBI................. (G) Component of (G) Non-metal
textile coating. tetrakis
(hydroxyalkyl)-,
halide, polymer
with amide
oxidized.
P-19-0046A.......... 2 4/24/2019 Kluber Lubrication (G) Lubricating (S) 1,2,4-
North America, L.P. agent; Degreasing Benzenetricarboxyli
agent. c acid, mixed decyl
and octyl
trimesters.
P-19-0049A.......... 3 4/3/2019 Allnex USA, Inc..... (G) Isolated (G) Fatty acids,
intermediate polymers with
coating resin. substituted
carbomonocycles,
dialkanolamine,
alkyl substituted
alkanediamine and
halo-substituted
heteromonocycle,
formates (salts).
P-19-0051A.......... 4 4/4/2019 CBI................. (G) UV curable inks. (G) 1,3-
Propanediamine,
N1,N1-dimethyl-,
polymers with
alkylene glycol
ether with
alkyltriol (3:1)
mixed acrylates and
adipates, and
alkylene glycol
monoacrylate ether
with alkyltriol
(3:1).
P-19-0053A.......... 3 4/14/2019 Wacker Chemical (S) Used as a (S) 1-Butanamine, N-
Corporation. surface treatment, butyl-N-
sealant, caulk, and [(triethoxysilyl)me
coating for mineral thyl]-.
building materials
such as concrete,
brick, limestone,
and plaster, as
well as on wood,
metal and other
substrates.
Formulations
containing the
cross-linker
provide release and
anti-graffiti
properties, water
repellency, weather
proofing, and
improved bonding in
adhesive/sealant
applications. The
new substance is a
moisture curing
cross-linking agent
which binds/joins
polymers together
when cured. Ethanol
is released during
cure, and once the
cure reaction is
complete, the
product will remain
bound in the cured
polymer matrix.
P-19-0056A.......... 2 4/5/2019 Neste Oil US, Inc... (G) The PMN (G) Aliphatic
substance will be hydrocarbons, C8-20-
imported as a raw branched and
material for linear.
manufacturing other
aliphatic
hydrocarbons.
P-19-0057A.......... 2 4/5/2019 CBI................. (G) Treatment (G) Alkanamine,
chemical. [(Alkoxy)alkoxy]alk
yl] alkyl.
P-19-0060A.......... 2 4/5/2019 Neste Oil US, Inc... (G) The PMN (G) Aliphatic
substance will be hydrocarbons, C8-18-
used as fuel. branched and
linear.
P-19-0061A.......... 2 4/5/2019 Neste Oil US, Inc... (G) The PMN (G) Aliphatic
substance will be hydrocarbons, C16-
used as fuel. 20-branched and
linear.
P-19-0067A.......... 3 4/3/2019 CBI................. (G) On site (G) Triglyceride,
consumption as a reactions products
raw material in the with
production of diethylenetriamine.
downstream
chemicals;
Production of oil
soluble corrosion
inhibitors;
Production of water-
soluble corrosion
inhibitors.
P-19-0067A.......... 4 4/17/2019 CBI................. (G) On site (G) Triglyceride,
consumption as a reactions products
raw material in the with
production of diethylenetriamine.
downstream
chemicals;
Production of oil
soluble corrosion
inhibitors;
Production of water-
soluble corrosion
inhibitors.
P-19-0068........... 2 4/16/2019 Dayglo Color Corp... (G) Polymeric Dye (G) 1,4-
Carrier. benzenedicarboxylic
acid, polymer with
diol, 5-amino-1,3,3-
trimethylcyclohexan
emethanamine, 1,2-
ethanediol and
urea.
[[Page 32166]]
P-19-0069A.......... 2 4/2/2019 CBI................. (G) Curing agent for (G)
coatings. Diisocyanatoalkane,
homopolymer, di-
alkyl malonate- and
alkyl acetoacetate-
blocked, isoalkyl
methylalkyl esters.
P-19-0070A.......... 2 4/3/2019 CBI................. (G) Curing agent for (G) Oxacyclanone,
coatings. polymer with
diisocyanatoalkane,
and alkyl-
(substitutedalkyl)-
polyol, di-alkyl
malonate- and alkyl
acetoacetate-
blocked, alkyl
esters.
P-19-0071A.......... 2 4/2/2019 CBI................. (G) Physical (G)
property modifier Trimethylolpropane,
for polymers. alkenoic acid,
triester.
P-19-0073........... 1 3/29/2019 CBI................. (G) Polymer coatings (G) Propoxylated,
additive--low ethoxylated
foaming wetting alkoxyalkyl ether.
agent.
P-19-0073A.......... 2 4/5/2019 CBI................. (G) Polymer coatings (G) Propoxylated,
additive--low ethoxylated
foaming wetting alkoxyalkyl ether.
agent.
P-19-0074........... 2 4/19/2019 CBI................. (S) Swelling agent (G)
for the dyeing of Poly(oxyalkylenediy
polyester and blend l), carbomonocyclic
fibers. acid, 2-
(aminocarbonyl)-
alkyl.
P-19-0075........... 1 4/2/2019 Allnex USA, Inc..... (S) The PMN (G) Substitued
substance is an polyalkylenepolycar
intermediate bomonocycle ester,
incorporated as a polymer with
component in dialkanolamine,
VIACRYL SC 6841. (hydroxyalkoxy)carb
onyl] derivs.,
(alkoxyalkoxy)
alkanol-blocked.
P-19-0075A.......... 2 4/11/2019 Allnex USA, Inc..... (S) The PMN (G) Alkenoic acid,
substance is an alkyl-,
intermediate (alkylamino)alkyl
incorporated as a ester, polymer with
component in alkyl substituted
VIACRYL SC 6841. carbomonocycle,
substituted-
[alkanenitrile]-
initiated,
formates.
P-19-0076........... 1 4/11/2019 CBI................. (G) An ingredient (G) Sulfonium,
used in the bis(dihalo-
manufacture of carbomonocycle)
photoresist. carbomonocycle,
salt with dihalo
substituted alkyl
carbopolycyclic
carboxylate (1:1).
P-19-0077........... 2 4/22/2019 CBI................. (G) Agricultural.... (G) Alkenylamide.
P-19-0078........... 1 4/18/2019 Shin-Etsu Microsi... (G) Polymer for (G) Substituted
photoresist. heterocyclic onium
compound, salt with
2,2,2-trifluoro-1-
(sulfomethyl)-1-
(trifluoromethyl)et
hyl 3-[(2-methyl-1-
oxo-2-propen-1-
yl)oxy]tricycle[3.3
.1.13,7]decane-1-
carboxylate (1:1),
polymer with
acenaphthylene, 1-
ethenyl-4-[(1-
ethylcyclopentyl)ox
y]benzene and 4-
ethenylphenol, di-
Me 2,2'-(1,2-
diazenediyl)bis[2-
methylpropanoate]-
initiated.
P-19-0079........... 1 4/22/2019 Shin-Etsu Microsi... (G) Polymer for (G) Substituted
photoresist. heterocyclic onium
compound, salt with
2,2,2-trifluoro-1-
(sulfomethyl)-1-
(trifluoromethyl)et
hyl 3-[(2-methyl-1-
oxo-2-propen-1-
yl)oxy]tricyclo[3.3
.1.13,7]decane-1-
carboxylate (1:1),
polymer with
acenaphthylene, 1-
ethenyl-4-[[1-(1-
methylethyl)cyclope
ntyl]oxy]benzene
and 4-
ethenylphenol, di-
Me 2,2'-(1,2-
diazenediyl)bis[2-
methylpropanoate]-
initiated.
P-19-0080........... 1 4/22/2019 CBI................. (G) Hydrocarbon fuel (G) Tetra
marker dye. (substituted
phenoxy)
Phthalocyanine.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission prior to the start of the 90 day review
period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date the NOC passed an initial screening, the date of
commencement provided by the submitter in the NOC, a notation of the
type of amendment (e.g., amendment to generic name, specific name,
technical contact information, etc.) and chemical substance identity.
Table II--NOCs Approved * From 04/01/2019 to 04/30/2019
--------------------------------------------------------------------------------------------------------------------------------------------------------
Commencement
Case No. Received date date If amendment, type of amendment Chemical substance
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-08-0099........................ 04/26/2019 12/10/2017 ................................................. (S) 1,4-benzenedicarboxylic
acid, polymer with 1,2-
ethanediol, 2,5-furandione,
2,2'-oxybis(ethanol) and 1,2-
propanediol.
P-12-0579........................ 04/25/2019 10/20/2014 ................................................. (S) L-Alaninamide, N-
[(phenylmethoxy)carbonyl]glycy
l-N-[(1S)-1-formyl-2-(4-
hydroxyphenyl)ethyl].
P-13-0410........................ 04/25/2019 09/02/2015 ................................................. (S) L-Alaninamide, N-
[(phenylmethoxy)carbonyl]glycy
l-N-[2-hydroxy-1-[(4-
hydroxypheny)methyl]-2-
sulfoethyl]-, sodium salt
(1:1).
P-16-0192........................ 04/12/2019 04/09/2019 ................................................. (S) Polysulfides, bis[3-
(triethoxysilyl)propyl],
hydrolysis products with
silica.
P-16-0222A....................... 04/10/2019 06/26/2016 Updated CBI substantiation....................... (G) Alkanedioic acid, polymer
with substituted
heteromonocycle, AAAA-hydro-AA-
hydroxypoly(oxy-1,2-
ethanediyl) ether with
substituted alkanediol and
substituted
bis[carbomonocycle],
alkanoate.
P-16-0337A....................... 04/26/2019 03/28/2018 Updated CBI substantiation....................... (G) Aliphatic acrylate.
[[Page 32167]]
P-16-0338A....................... 04/12/2019 04/23/2017 Updated CBI substantiation....................... (G) Xanthylium, (sulfoaryl)-bis
[(substituted aryl) amino]-,
sulfo derivs., inner salts,
metal salts.
P-16-0339A....................... 04/12/2019 04/23/2017 Updated CBI substantiation....................... (G) Substituted triazinyl metal
salt, diazotized, coupled with
substituted
pyridobenzimidazolesulfonic
acids, substituted
pyridobenzimidazolesulfonic
acids, diazotized substituted
alkanesulfonic acid,
diazotized substituted
aromatic sulfonate, diazotized
substituted aromatic
sulfonate, metal salts.
P-16-0577A....................... 04/17/2019 11/09/2017 Updated CBI substantiation....................... (G) Alkyl polyamine.
P-17-0326A....................... 04/09/2019 01/16/2018 Updated CBI substantiation....................... (G) Allyloxymethylacrylate
P-18-0132........................ 04/22/2019 04/17/2019 ................................................. (G) Substituted Benzene, 4-
methoxy-2-nitro-5-[2-[(1e)-1-
[[(2-
methoxyphenyl)amino]carbonyl]-
2-oxopropylidene]hydrazinyl]-,
sodium salt (1:1).
P-18-0168........................ 04/05/2019 04/02/2019 ................................................. (G) Alkoxylated triaryl
methane.
P-18-0233A....................... 04/01/2019 02/13/2019 Updated CBI substantiation....................... (G) Alkyl alkenoic acid, alkyl
ester, telomer with
alkylthiol, substituted
carbomonocycle, substituted
alkyl alkyl alkenoate and
hydroxyalkyl alkenoate, tert-
butyl alkyl peroxoate-
initiated.
P-18-0379........................ 04/16/2019 04/09/2019 ................................................. (G) Cashew, nutshell liq.,
polymer with epichlorohydrin,
amines, formaldehyde and
glycol.
P-19-0007........................ 04/26/2019 04/21/2019 ................................................. (G) Alkenoic acid, alkyl-,
hydroxyalkyl ester, polymer
with alkyl-alkenoate,
alkenylcarbomonocycle,
hydroxyalkyl-alkenoate, alkyl
substituted alkenoate and
heteromonocycle, alkyl
substituted peroxoate-
initiated, polymers with
[substituted alkanenitrile]-
initiated acrylic acid-alkane
acrylates-alkyl substituted
carbomoncycle polymer.
P-19-0008........................ 04/17/2019 04/17/2019 ................................................. (G) Substituted
polyalkylenepolycarbomonocycle
ester, polymer with
dialkanolamine,
(hydroxyalkoxy)carbonyl]
derivs., (alkoxyalkoxy)
alkanol-blocked.
P-19-0009........................ 04/22/2019 04/20/2019 ................................................. (G) Carbonmonocycles, polymer
with haloalkyl substituted
heteromonocycle and hydro-
hydroxypoly[oxy(alkyl-
alkanediyl)], dialkyl-
alkanediamineterminated,
hydroxyalkylated, acetates
(salts).
P-19-0026........................ 04/17/2019 04/17/2019 ................................................. (G) Alkanoic acid, compds. with
substituted carbomonocycle-
dialkyl-alkanediamine-halo
substituted heteromonocycle-
polyalkylene glycol
polymerdialkanolamine reaction
products.
P-19-0027........................ 04/17/2019 04/17/2019 ................................................. (G) Substituted carbomoncycle,
polymer with haloalkyl
substituted heteromonocycle,
dialkyl-alkanediamine and
hydro-
hydroxypoly[oxy(alkylalkanediy
l)], reaction products with
metal oxide and
dialkanolamine, acetates
(salts).
--------------------------------------------------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided
with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that have passed an initial screening by EPA during
this time period: The EPA case number assigned to the test information;
the date the test information was received by EPA, the type of test
information submitted, and chemical substance identity.
Table III--Test Information Received From 04/01/2019 to 04/30/2019
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
P-00-0281........................ 4/3/2019 Freshwater AAP Algal Medium, (G) Alkylarylsulfonic acid,
Daphnia Sp. Acute sodium salts.
Immobilisation Test (OECD Test
Guideline 202), A 96-Hour
Static Acute Toxicity Test with
The Fathead Minnow (OECD Test
Guideline 203), A 96-Hour
Toxicity Test with the
Freshwater Alga (OECD Test
Guideline 201), Analytical
method development, and Surface
Tension of Aqueous Solutions
(OECD Test Guideline 115).
P-11-0063........................ 4/3/2019 Annual Analyte Test Data........ (G) Perfluoroalkyl acryalte
copolymer.
P-16-0150........................ 4/1/2019 28-day (Subacute) Inhalation (G) Chlorofluorocarbon.
Toxicity Study (OECD 412).
P-16-0377........................ 4/17/2019 Standard Test Method for (G) Polyester polyol.
Determination of Particles
Resulting from the Attrition of
Granular Pesticides (ASTM
E2316).
P-16-0378........................ 4/17/2019 Standard Test Method for (G) Polyester polyol.
Determination of Particles
Resulting from the Attrition of
Granular Pesticides (ASTM
E2316).
P-16-0462........................ 4/17/2019 Metals Analysis Report Quarter 1 (G) Ash (residues),
2019. reaction products with
tetraethoxydioxa-
polyheteroatom-
disilaalkane.
P-16-0543........................ 4/17/2019 Exposure Monitoring Report...... (G) Halogenophosphoric acid
metal salt.
P-17-0244........................ 4/1/2019 Guidance Document on (G) Metal oxide reaction
Transformation/Dissolution of products with cadmium
Metals and Metal Compounds in metal selenide sulfide,
aqueous media (OECD). and amine.
P-18-0293........................ 4/10/2019 Ready Biodegradability: (S) Propanedioic acid, 2-
Manomertric Respirometry Test methylene-, 1,3-dihexyl
(OECD 301F). ester.
P-18-0294........................ 4/10/2019 Ready Biodegradability: (S) Propanedioic acid, 2-
Manomertric Respirometry Test methylene-, 1,3-
(OECD 301F). dicyclohexyl ester.
P-18-0351........................ 4/26/2019 Gas Chromatography study........ (G) Acrylic acid, tricyclo
alkyl ester.
P-18-0376........................ 4/1/2019 Reproduction/Developmental (G) Sulfuric acid,
Toxicity Screening Test (OECD aminoalkyl ester.
421).
P-18-0391........................ 4/4/2019 Non-Renewal 96-hour acute (S) 1-propanaminium, N-
toxicity test (OCSPP 850.1075), (carboxymethyl)-N, N-
48-hour Acute Toxicity Test dimethyl-3-[(3,5, 5-
(OCSPP 850.1010), 96-Hour Algal trimethyl-1-oxohexyl),
Toxicity Test (OCSPP 850.4500). amino]- inner salt.
[[Page 32168]]
P-19-0029........................ 4/5/2019 Freshwater Alga and (S) Phosphonium,
Cyanobacteria, Growth tributylethyl-, diethyl
Inhibition Test (OECD 201), phosphate (1:1).
Daphnia sp., Acute
Immobilisation Test (OECD 202),
Freshwater Ecotoxicity and
Biodegradation Properties of
Some Common Ionic Liquids (OECD
201, 202, 301F), and Acute Oral
Toxicity--Acute Toxic Class
Method (OECD 423).
P-19-0054........................ 4/17/2019 P2 Model--Environmental (G) Polyamines, reaction
Assessment, MALDI Analysis for products with succinic
NAMW, % Amine Nitrogen for PMN anhydride polyalkenyl
Substance, %P (Phosphorus). derivs., metal salts,
polyamines, reaction
products with succinic
anhydride, polyalkenyl
derivs., metal salts.
P-19-0071........................ 4/25/2019 Mammalian Chromosome Aberration (G) Trimethylolpropane,
Test (OECD 473), Bacterial alkenoic acid, triester.
Reverse Mutation Test (OECD
471), In Vitro Mammalian Cell
Gene Mutation Tests Using the
Thymidine Kinase Gene (OECD
490).
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 5 U.S.C. 2601 et seq.
Dated: June 26, 2019.
Megan Carroll,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2019-14273 Filed 7-3-19; 8:45 am]
BILLING CODE 6560-50-P