[Federal Register Volume 84, Number 119 (Thursday, June 20, 2019)]
[Notices]
[Pages 28799-28811]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-13099]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2019-0075; FRL-9992-77]
Certain New Chemicals; Receipt and Status Information for March
2019
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 03/01/
2019 to 03/31/2019.
DATES: Comments identified by the specific case number provided in this
document must be received on or before July 22, 2019.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2019-0075, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at http://www.epa.gov/dockets/contacts.html. Additional
instructions on commenting or visiting the docket, along with more
information about dockets generally, is available at http://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Information
Management Division (7407M), Office of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington,
DC 20460-0001; telephone number: (202) 564-8593; email address:
[email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
What action is the Agency taking?
This document provides the receipt and status reports for the
period from 03/01/2019 to 03/31/2019. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be
either an ``existing'' chemical substance or a ``new'' chemical
substance. Any chemical substance that is not on EPA's
[[Page 28800]]
TSCA Inventory of Chemical Substances (TSCA Inventory) is classified as
a ``new chemical substance,'' while a chemical substance that is listed
on the TSCA Inventory is classified as an ``existing chemical
substance.'' (See TSCA section 3(11).) For more information about the
TSCA Inventory go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: http://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved* From 03/01/2019 to 03/31/2019
--------------------------------------------------------------------------------------------------------------------------------------------------------
Case No. Version Received date Manufacturer Use Chemical substance
--------------------------------------------------------------------------------------------------------------------------------------------------------
J-19-0018............................ 2 3/5/2019 CBI..................... (G) Protein production....... (G) Protein-producing
modified microorganism, with
chromosomally-borne
modifications.
[[Page 28801]]
J-19-0019............................ 1 3/20/2019 Danisco US, Inc......... (G) Production of an enzyme (G) Genetically modified
substance. microorganism for the
production of an enzyme
substance.
J-19-0020............................ 1 3/20/2019 Danisco US, Inc......... (G) Production of an enzyme (G) Genetically modified
substance. microorganism for the
production of an enzyme
substance.
P-16-0225A........................... 2 3/14/2019 International Flavors... (S) The notified substance (S) isomer mixture of
will be used as a fragrance Cyclohexanol, 4-ethylidene-2-
ingredient, being blended propoxy- (CAS 1631145-48-6)
(mixed) with other fragrance (35-45%) and Cyclohexanol, 5-
ingredients to make ethylidene-2-propoxy.
fragrance oils that will be
sold to industrial and
commercial customers for
their incorporation into
soaps, detergents, cleaners,
air fresheners, candles and
other similar industrial,
household and consumer
products.
P-16-0422A........................... 4 3/20/2019 Polymer Additives Inc... (G) Additive for Polymers.... (S) 1,2-
Cyclohexanedicarboxylic
acid, 1-(phenylmethyl)
ester, ester with 2,2,4-
trimethyl-1,3-pentanediol
mono(2-methylpropanoate).
P-16-0493A........................... 7 2/7/2019 CBI..................... (G) Paint.................... (G) Dicarboxylic acids,
polymers with alkyl prop-2-
enoate, alkyl 2-methylprop-2-
enoate, alkyl [(alkenyl)
alkyl] alkanediol,
alkanediol, alkanedioic
acid, alkyl 2-methylprop-2-
enoate, alkyl prop-2-enoic
acid, alkylene
[Isocyanatocarbomonocyle]
and alkanediol, alkanolamine-
blocked, compds with 2-
(alkylamino)alkanol.
P-16-0593A........................... 4 2/22/2019 Emery Oleochemicals..... (S) Aromatic polyester polyol (G) Aromatic Polyester
for rigid foam. Polyol.
[[Page 28802]]
P-17-0108A........................... 5 2/27/2019 Crison LLC.............. (G) The product of this PMN (S) Carbonodithioic acid, O-
is typically added at a rate [2-[(dithiocarboxy)amino]-2-
of 3-5% of the collector methylpropyl] ester, sodium
package. The product is salt (1:2).
added after the grinding of
the ore, along with copious
amounts of water to enable
the flotation of the desired
mineral. The product binds
to the target mineral and
makes it hydrophobic,
enabling the dissolved gas
flotation system to float
the target mineral. The
collected target mineral
concentrate (with the
product bound to them) is
then sent to a metullurgy
plant for further
purification. The high
temperature processing
results in all the organics
(including the product)
being burned off. The
resulting combustion
products are scrubbed as
required by the
mettullurgical plants
permits. A very small amount
of product settles with the
larger particles of ore that
contain target mineral. This
product goes with the gangue
to the tailing ponds. The
tailing ponds have their own
set of permits but are
isolated with various
membrane and other
groundwater protection
methods that are beyond the
scope of this application.
It is worth noting that only
3-5% of the collector
package at this time is made
up of the product of this
PMN. The chemistry is an
incremental improvement on
the currently commercially
practiced collection method,
containing the same
functional groups and
similar solubilities. Thus,
the product of this PMN is
readily detected or measured
with current monitoring at
the use sites. Because the
product is added at a stage
where large amounts of water
are also added, the current
international users wash the
drums with large amounts of
water, and the wash water is
added to the process with
the prime material as it is
added.
P-17-0240A........................... 2 3/1/2019 Ashland, Inc............ (G) Encapsulanting polymer... (G) Alkenoic acid, polymer
with
alkanepolyolpolyacrylate,
2,2'-azobis[2-
methylbutanenitrile]-
initiated.
P-17-0240A........................... 3 3/7/2019 Ashland, Inc............ (G) Encapsulanting polymer... (G) Alkenoic acid, polymer
with
alkanepolyolpolyacrylate,
2,2'-azobis[2-
methylbutanenitrile]-
initiated.
P-17-0312A........................... 7 2/20/2019 CBI..................... (G)Additive for electrocoat (G) Organic acid, compds.
formulas. with bisphenol A-
epichlorohydrin-
polypropylene glycol
diglycidyl ether polymer-
disubstituted polypropylene
glycol reaction products.
[[Page 28803]]
P-17-0313A........................... 7 2/20/2019 CBI..................... (G)Additive for electrocoat (G) Phenol, 4,4'-(1-
formulas. methylethylidene) bis-,
polymer with 2-
(chloromethyl) oxirane and
alpha-(2-oxiranylmethyl)-
omega-(2-oxiranylmethoxy)
poly[oxy(methyl-1,2-
ethanediyl)], reaction
products with disubstituted
amine and disubstituted
polypropylene glycol,
organic acid salts.
P-17-0314A........................... 7 2/20/2019 CBI..................... (G)Additive for electrocoat (G) Organic acid, 2-
formulas. substituted-, compds. with
bisphenol A-epichlorohydrin-
polypropylene glycol
diglycidyl ether polymer-
disubstituted
aminedisubstituted
polypropylene glycol
reaction products.
P-17-0315A........................... 7 2/20/2019 CBI..................... (G)Additive for electrocoat (G) Phenol, 4,4'-(1-
formulas. methylethylidene) bis-,
polymer with alpha-(2-
substituted-methylethyl)-
omega-(2-substituted-
methylethoxy)
poly[oxy(methyl-1,2-
ethanediyl)], 2-
(chloromethyl) oxirane and
alpha-(2-oxiranylmethyl)-
omega-(2-oxiranylmethoxy)
poly[oxy(methyl-1,2-
ethanediyl)], alkylphenyl
ethers, reaction products
with disubstituted amine,
organic acid salts.
P-17-0316A........................... 7 2/20/2019 CBI..................... (G)Additive for electrocoat (G) Organic acid, compds.
formulas. with bisphenol A-
epichlorohydrin-
disubstituted polypropylene
glycol-polypropylene glycol
diglycidyl ether polymer
alkylphenyl ethers-
disubstituted amine reaction
products.
P-17-0317A........................... 7 2/20/2019 CBI..................... (G)Additive for electrocoat (G) Organic acid, compds.
formulas. with bisphenol A-
epichlorohydrin-
polypropylene glycol
diglycidyl ether polymer-
disubstituted polypropylene
glycol reaction products.
P-17-0375A........................... 4 2/8/2019 CBI..................... (G) Paint additive........... (G) 2-Oxepanone, polymer with
diisocyanatohexane, alkyl-
((hydroxyalkyl)-alkanediol
and isocyanato-
(isocyanatoalkyl)-
trialkylcyclohexane, di-
alkyl malonate- and
polyalkylene glycol mono-Me
ether-blocked, reaction
products with (methylalkyl)-
propanamine.
P-17-0395A........................... 4 2/7/2019 CBI..................... (G) Water treatment additive. (G) Alkyl tri dithiocarbmate
tri salt.
P-18-0036A........................... 5 2/8/2019 CBI..................... (G) Water repellant.......... (S) Siloxanes and Silicones,
di-Me, 3- [3-carboxy-2(or 3)-
(octenyl)-1-oxopropoxy]
propyl group-terminated.
P-18-0064A........................... 2 2/25/2019 CBI..................... (G) Intermediate............. (G) Fluorinated carboxylate
esters and fluorinated
alkoxyalkyl heterocycles.
P-18-0069A........................... 2 2/20/2019 Sasol Chemicals (USA), (G) Polymer performance (G) Surface modified
LLC. additive. boehmite.
P-18-0085A........................... 2 3/5/2019 CBI..................... (G) Industrial use in (G) Fatty acids reaction
oilfield. products with ethyleneamines
and dialkyl ester.
P-18-0106A........................... 3 2/25/2019 CBI..................... (S) Process aid.............. (G) Perfluoro[(alkenyl)oxy]
alkane-, manuf. of, by-
products from, distn.
residues.
P-18-0120A........................... 4 3/19/2019 Designer Molecules, Inc. (G) Adhesive component....... (S) 1H-Pyrrole-2,5-dione,
1,1'-C36-alkylenebis-.
[[Page 28804]]
P-18-0131A........................... 4 3/5/2019 Coim USA, Inc........... (S) Polyol prepolymer in (G) Soybean oil, polymer with
polyester foam applications. mixed difunctional glycols,
glycerol, melamine, phthalic
anhydride, poyethylene
glycol, and terephathalic
acid.
P-18-0169A........................... 7 2/15/2019 C. L. Hauthaway & Sons (G) Protective coating....... (G) Propanoic acid, 3-hydroxy-
Corp. 2-(hydroxymethyl)-2-methyl-,
polymer with dimethyl
carbonate, 1,6-hexanediol,
diamine and 1,1'-
methylenebis[4-
isocyanatocyclohexane],
acrylate-blocked, compds.
with triethylamine.
P-18-0175A........................... 6 2/12/2019 Hexion, Inc............. (S) Food can coating;........ (S) Formaldehyde, polymer
(S) Non-food contact can with 4-(1,1-dimethylethyl)
coating. phenol and phenol, Bu ether.
P-18-0219A........................... 6 3/5/2019 CBI..................... (G) Intermediate for topcoat. (G) Polythioether, short
chain diol polymer
terminated with aliphatic
diisocyanate.
P-18-0247A........................... 3 3/13/2019 CBI..................... (S) Crosslinker for (G) Isocyanic acid,
automotive electrocoat. polymethylenepolyphenylene
ester, polymer with 2-ethyl-
2-(hydroxymethyl)-1,3-
propanediol,
polyetherpolyol, [iquest],
[iquest]'-[(1-
methylethylidene) di-4,1-
phenylene] bis[[iquest]-
hydroxypoly(oxy-1,2-
ethanediyl)] and 1,2-
propanediol, iso-Bu alc.-
and 2-butoxyethanol- and 2-
(2-butoxyethoxy) ethanol-
and Et alc.- and methanol-
and 1-methoxy-2-propanol-
blocked.
P-18-0248A........................... 3 3/13/2019 CBI..................... (S) Crosslinker for (G) Isocyanic acid,
automotive electrocoat. polymethylenepolyphenylene
ester, polymer with
polyetherpolyol, 2-
butoxyethanol- and 2-(2-
butoxyethoxy) ethanol- and
methanolblocked.
P-18-0249A........................... 3 3/13/2019 CBI..................... (S) Crosslinker for (G) Isocyanic acid,
automotive electrocoat. polymethylenepolyphenylene
ester, polymer with
polyetherpolyol, 2-
butoxyethanol- and 2-(2-
butoxyethoxy) ethanol- and
methanoland 1-methoxy-2-
propanol-blocked.
P-18-0250A........................... 3 3/13/2019 CBI..................... (S) Crosslinker for (G) Isocyanic acid,
automotive electrocoat. polymethylenepolyphenylene
ester, polymer with
polyetherpolyol, 2-
butoxyethanol- and 2-(2-
butoxyethoxy) ethanol- and
1(or2) -(2-
methoxymethylethoxy)
propanol-blocked.
P-18-0251A........................... 3 3/13/2019 CBI..................... (S) Crosslinker for (S) Isocyanic acid,
automotive electrocoat. polymethylenepolyphenylene
ester, 2-butoxyethanol- and
2-(2-butoxyethoxy) ethanol-
and methanol- and 1(or2) -(2-
methoxymethylethoxy)
propanol-blocked.
P-18-0252A........................... 3 3/13/2019 CBI..................... (S) Crosslinker for (S) Isocyanic acid,
automotive electrocoat. polymethylenepolyphenylene
ester, 2-butoxyethanol- and
2-(2-butoxyethoxy) ethanol-
and methanol- and 1-methoxy-
2-propanol-blocked.
P-18-0258A........................... 2 3/7/2019 CBI..................... (G) Copolyamide for packaging (G) Dioic acids, polymers
films; (G) Copolyamide for with caprolactam and
monofilamen; (G) Copolyamide alkyldiamines.
for molding parts.
[[Page 28805]]
P-18-0259A........................... 2 3/7/2019 CBI..................... (G) Copolyamide for packaging (G) Fatty acids, dimers,
films; (G) Copolyamide for hydrogenated, polymers with
monofilamen; (G) Copolyamide caprolactam and alkyl
for molding parts. diamine.
P-18-0262A........................... 4 2/14/2019 Seppic.................. (S) Function: Stabilizer of (S) 2-Propenoic acid, 2-
suspensions, Applications: methyl-, dodecyl ester,
Detergency, treatment of polymer with ammonium 2-
physical surfaces, methyl-2-[(1-oxo-2-propen-1-
development of soaps; (S) yl) amino]-1-
Function: thickener, propanesulfonate (1:1), N, N-
Applications: Paints, dimethyl-2-propenamide and.
adhesive; (S) Function: alpha-(2-methyl-1-oxo-2-
polishes, Applications: Wood propen-1-yl)-omega-
care, leather care. (dodecyloxy) poly(oxy-1,2-
ethanediyl).
P-18-0270A........................... 4 3/8/2019 Specialty Elements, LLC. (S) Active co-solvent for (G) Ethanol, 2-butoxy-, 1,1'-
solvent-based coatings; (S) ester.
Coalescent for industrial
water-based coatings; (S)
Coupling agent and solvent
in industrial cleaners, rust
removers, hard surface
cleaners, and disinfectants;
(S) Primary solvent in
solvent-based silk screen
printing inks; (S) Coupling
agent for resins and dyes in
water-based printing inks;
(S) Other uses include a co-
solvent for agricultural
pesticides and may be used
in the production of a wide
variety of products and
commodities such as
polyester resins, engine
coolants, latex paints, heat
transfer fluids and deicing
compounds, lubricants,
plasticizers and cement
grinding additives.
P-18-0271A........................... 4 3/8/2019 Specialty Elements, LLC. (S) Film forming coalescent (G) 2-Propanol, 1-butoxy-,
for architectural coatings; 2,2'-ester.
(S) Film forming coalescent
for consumer architectural
coatings; (S) Film forming
coalescent for automotive
OEM coatings
(electrodeposition primers);
(S) Film forming coalescent
for can and coil coatings;
(S) Film forming coalescent
for industrial wood
coatings; (S) Film forming
coalescent for floor
polishes; (S) Film forming
coalescent for industrial
maintenance coatings; (S)
Film forming coalescent for
marine and wood coatings;
(S) Film forming coalescent
for consumer marine and wood
coatings; (S) Film forming
coalescent for
transportation coatings; (S)
Other uses include Graphic
Arts--Printing Inks
(Lithographic and
Letterpress oil-based inks),
Reactive Intermediate--Ester
Derivatives for Plasticizers.
P-18-0272A........................... 2 2/26/2019 CBI..................... (G) Polymer composite (G) Metal, alkylcarboxylate
additive. oxo complexes.
P-18-0274A........................... 5 3/13/2019 CBI..................... (S) Chemical intermediate; (G) Heterocycle fluoroalkyl
(G) Additive. sulfonyl.
P-18-0275A........................... 2 3/13/2019 CBI..................... (G) Polymer additive......... (G) Methanone phenylene
fluoroalkyl sulfonyl
heterocycle.
P-18-0282A........................... 11 3/7/2019 Ashland, Inc............ (G) Adhesive................. (G) Fatty acid ester,
polyether, diisocyanate
polymer.
P-18-0283A........................... 4 3/1/2019 CBI..................... (G)Open, non-dispersive use.. (G) Hydroxy alkanoic acid,
compds. with
aminoalkoxyalcohol-epoxy
polymer-alkanolamine
reaction products.
[[Page 28806]]
P-18-0283A........................... 5 3/11/2019 CBI..................... (G)Open, non-dispersive use.. (G) Hydroxy alkanoic acid,
compds. with
aminoalkoxyalcohol-epoxy
polymer-alkanolamine
reaction products.
P-18-0284A........................... 2 3/1/2019 CBI..................... (G) Polymer composite (G) Inorganic acid, reaction
additive. products with alkyl alcohol.
P-18-0292A........................... 2 2/19/2019 CBI..................... (G) Use in print resins...... (G) Alkanediol, polymer with
5-isocyanato-1-
(isocyanatomethyl)-1,3,3-
trimethylcyclohexane,
alkylaminoalkyl methacrylate-
blocked.
P-18-0292A........................... 3 3/21/2019 CBI..................... (G) Use in print resins...... (G) Alkanediol, polymer with
5-isocyanato-1-
(isocyanatomethyl)-1,3,3-
trimethylcyclohexane,
alkylaminoalkyl methacrylate-
blocked.
P-18-0300A........................... 2 2/8/2019 CBI..................... (S) Additive for automatic (G) Heteromonocycle, alkenoic
dishwashing detergent. 1:1 salt, polymer with alpha-
(2-methyl-1-oxo-2-propen-1-
y) l-omegamethoxypoly(oxy-
1,2-ethanediyl) and methyl-
alkenoic acid.
P-18-0313A........................... 4 3/19/2019 Ashland Inc............. (G) Adhesive................. (G) Alkoxylated glycol ether
with 1,2-propanediol,
reaction products with alkyl
alcohol blocked 1,1'-
methylenebis [4-
isocyanatobenzene]
homopolymer and 1,1'-
methylenebis [4-
isocyanatobenzene].
P-18-0322A........................... 6 2/7/2019 CBI..................... (G) The notified substance is (G) Heteromonocycle, 4,6-
used as a fragrance dimethyl-2-(1-phenylethyl)-.
ingredient in consumer
products.
P-18-0327A........................... 4 3/21/2019 CBI..................... (G) Filler for non-dispersive (G) Mixed metal oxide.
resins.
P-18-0341A........................... 3 3/15/2019 CBI..................... (G) Component in coatings.... (G) Alkane dicarboxylic acid,
polymer with alkoxylated
polyalcohol, alkyl
polyglycol, alkyl dialcohol,
and functionalized
carboxylic acid.
P-18-0342A........................... 3 3/15/2019 CBI..................... (G) Component in coatings.... (G) Alkane dicarboxylic acid,
polymer with alkyl
polyglycol, alkyl dialcohol,
and functionalized
carboxylic acid.
P-18-0343A........................... 3 3/15/2019 CBI..................... (G) Component in coatings.... (G) Alkane dicarboxylic acid,
polymer with alkoxylated
polyalcohol, and alkyl
dialcohol, (hydroxy alkyl)
ester.
P-18-0344A........................... 3 3/15/2019 CBI..................... (G) Component in coatings.... (G) Aromatic dicarboxylic
acid, polymer with alkane
dicarboxylic acid,
alkoxylated polyalcohol, and
alkyl dialcohol.
P-18-0346A........................... 3 3/4/2019 Chitec Technology Co., (S) Antioxidant compounded (S) 2,4,8,10-Tetraoxa-3,9-
Ltd. into various polymers to be diphosphaspiro [5.5]
used in extrusion processes undecane, 3,9-bis-[2-(1-
to fabricate articles. methyl-1-phenylethyl)-4-
(1,1,3,3-tetramethylbutyl)
phenoxy]-.
P-18-0381A........................... 2 3/19/2019 The Shepherd Color (G) For use in exterior (S) Indium manganese yttrium
Company. paints and plastics; (G) For oxide.
use in coatings; (G) For use
in high temperature
engineering polymers; (G)
For use in artist materials.
P-18-0387A........................... 3 2/11/2019 CBI..................... (G) Plastic additive......... (G) Alkanal, reaction
products with alkanediyl
bis[alkyl-tris(alkyl-
heterocycle)-1,3,5-triazine-
2,4,6-triamine and hydrogen
peroxide.
P-18-0388A........................... 3 2/11/2019 CBI..................... (G) Plastic additive......... (G) 1,3,5-triazine-2,4,6-
triamine, alkanediyl
bis[alkyl-tris(alkyl-
heterocycle)-, allyl
derivs., oxidized,
hydrogenated.
[[Page 28807]]
P-18-0389A........................... 2 3/13/2019 CBI..................... (G) Component in package (G) Alkenoic acid, alkyl-
coatings. substituted, epoxy ester,
polymer with alkyl
alkenoate, alkene, and
polylactide.
P-18-0393A........................... 2 3/15/2019 CBI..................... (G) Paint.................... (G) Alkenoic acid, alkyl,
alkyl ester, polymer with
alkyl propenoate, vinyl
carbomonocyle, substituted
alkyl propenoate, alkyl 2-
alkyl 2-propenoate,
alkanediol mono(2-alkyl-2-
propenoate) and
bicarbomonocylo alkyl 2-
alkyl-2-alkenoate, tertiary
alkyl substituted alkane
peroxoate initiated.
P-18-0394A........................... 2 2/25/2019 CBI..................... (G) Chemical Intermediate.... (G) Substituted benzylic
ether polyethylene glycol
alkyl ether derivative.
P-18-0402A........................... 3 3/11/2019 CBI..................... (G) Fuel additive............ (G) Phenol,
alkanepolyolbis(heteroalkyle
ne)bis-, polyalkylene
derivs.
P-19-0009A........................... 4 2/7/2019 Allnex USA, Inc......... (S) The PMN substance is used (G) Carbonmonocycles, polymer
as a coating resin additive with haloalkyl substituted
for corrosion protection. heteromonocycle and hydro-
hydroxypoly[oxy(alkyl-
alkanediyl)], dialkyl-
alkanediamineterminated,
hydroxyalkylated, acetates
(salts).
P-19-0012A........................... 9 3/11/2019 CBI..................... (S) Resin component for the (G) Benzenedicarboxylic acid,
polyisocyanurate; (S) Resin rection products with
component in specialty isobenzofurandione and
polyurethane kits and diethylene glycol.
systems for aerospace and
military applications.
P-19-0015A........................... 3 3/1/2019 CBI..................... (S) Emulsifier for use in (G) Alkyl cyclic amide.
asphalt applications.
P-19-0021A........................... 2 2/13/2019 CBI..................... (G) Pigment ink.............. (G) Hydroxyalkyl carboxylic
acid, polymer with
alkylamine, alkylene
carbonate, alkanediol,
isocyanate, compd. with
alkylamine.
P-19-0022A........................... 2 2/13/2019 CBI..................... (G) Pigment ink.............. (G) Hydroxyalkyl carboxylic
acid, polymer with
alkylamine, alkyl carbonate,
alkanediol, isocyanate,
compd. with alkylamine.
P-19-0025A........................... 2 2/21/2019 Bercen, Inc............. (G) Hydrophobe formulation... (S) 11-Docosene.
P-19-0026A........................... 4 2/27/2019 Allnex USA, Inc......... (S) The PMN substance is an (G) Alkanoic acid, compds.
isolated intermediate with substituted
incorporated as a component carbomonocycle-dialkyl-
in several imported allnex alkanediamine-halosubstitued
coating resin products that heteromonocycle-polyalkylene
are only applied by Cathodic glycol polymerdialkanolamine
Electrodeposition (CED) and reaction products.
used as additives for
corrosion protection.
P-19-0028A........................... 6 2/22/2019 CBI..................... (G) Lubricating oil additive. (G) Alkyl salicylate, metal
salts.
P-19-0032A........................... 4 3/18/2019 Presidium USA, Inc...... (G) Polyol used in the (G) Carbonic dichloride,
manufacture of articles made polymer with 4,4'-(1-
of a polyurethane thermoset methylethylidene)
material. bis[phenol] ester, polymer
with tetrol and polyether
tetrol.
P-19-0034A........................... 3 3/15/2019 CBI..................... (G) Contained use as a (G) Metal, bis (2,4-
component of tires. pentanedionato-kO2, kO4)-,
(T-4)-.
P-19-0038A........................... 3 2/7/2019 Allan Chemical (S) Ink carrier for the (S) Fatty acids, coco, iso-Bu
Corporation. ceramic industries. esters.
P-19-0050A........................... 3 3/11/2019 Kimes Technologies (S) Rust preventative........ (S) Hydrocarbon waxes
International, Inc. (petroleum), oxidized, Bu
esters.
[[Page 28808]]
P-19-0053A........................... 2 3/13/2019 Wacker Chemical (S) Used as a surface (S) 1-Butanamine, N-butyl-N-
Corporation. treatment, sealant, caulk, [(triethoxysilyl)methyl]-.
and coating for mineral
building materials such as
concrete, brick, limestone,
and plaster, as well as on
wood, metal and other
substrates. Formulations
containing the cross-linker
provide release and anti-
graffiti properties, water
repellency, weather
proofing, and improved
bonding in adhesive/sealant
applications. The new
substance is a moisture
curing cross-linking agent
which binds/joins polymers
together when cured. Ethanol
is released during cure, and
once the cure reaction is
complete, the product will
remain bound in the cured
polymer matrix.
P-19-0064............................ 1 3/4/2019 The Sherwin Williams (G) Polymeric film former for (G) 4,4'-methylenebis [2,6-
Company. coatings. dimethyl phenol] polymer
with 2-(chloromethyl)
oxirane, 1,4-benzyl diol, 2-
methyl-2-propenoic acid,
butyl 2-methyl 2-propenoate,
ethyl 2-methyl 2-propenoate,
and ethyl 2-propenoate,
reaction products with 2-
(dimethylamino) ethanol.
P-19-0064A........................... 2 3/18/2019 The Sherwin Williams (G) Polymeric film former for (G) 4,4'-methylenebis [2,6-
Company. coatings. dimethyl phenol] polymer
with 2-(chloromethyl)
oxirane, 1,4-benzyl diol, 2-
methyl-2-propenoic acid,
butyl 2-methyl 2-propenoate,
ethyl 2-methyl 2-propenoate,
and ethyl 2-propenoate,
reaction products with 2-
(dimethylamino) ethanol.
P-19-0065............................ 4 3/22/2019 eScientia Technologies, (S) Fire retardant for (S) 2lambda5, 4lambda5,
LLC. thermal plastics: 6lambda5--1,3,5,2,4,6
Application: This product is Triazatriphosphorine,
the environmental protection 2,2,4,4,6,6--hexaphenoxy-.
Phosphazene flame retardant.
It does not produce
pollutants after burning. It
is mainly used in PC and ABS
resins. It has good flame
retardancy on epoxy resin,
it can be used to make EMC
for IC Packaging, its flame
retardancy is much better
than Brominated flame
retardant, the flame
retardancy can reach UL-94V0
grade. Oxygen index could
reach 33.1%. When it is used
in Benzoxazine Resin glass
cloth laminate, if the HPCTP
is 10%, the grade of burning
could reach V-0 grade, the
parallel breakdown voltage
is 47KV. When it is used in
Polyethylene, the LOI of
final flame retardancy
polyethylene could reach 30-
33. After used in viscose
spinning solution, we could
get the flame retardant
viscose fiber with oxygen
index 25.3-26.7. If the
added amount is 12% in PC/
ABS, it could pass the UL-94
V0 test. It also can be used
in LED, powder coating,
potting material and
polymers.
P-19-0066............................ 4 3/22/2019 eScientia Technologies, (S) Fire retardant........... (S) 2lambda5, 4lambda5,--
LLC. 1,3,5,2,4,6
Triazatriphosphorine,
2,2,4,4,6,6, -hexaphenoxy.
[[Page 28809]]
P-19-0067............................ 2 3/19/2019 CBI..................... (G) On site consumption as a (G) Triglyceride, reactions
raw material in the products with
production of downstream diethylenetriamine.
chemicals, (G) Production of
water-soluble corrosion
inhibitors; (G) Production
of oil soluble corrosion
inhibitors..
P-19-0069............................ 1 3/19/2019 CBI..................... (G) Curing agent for coatings (G) Diisocyanatoalkane,
homopolymer, di-alkyl
malonate- and alkyl
acetoacetate-blocked,
isoalkyl methylalkyl esters.
P-19-0070............................ 1 3/22/2019 CBI..................... (G) Curing agent for coatings (G) Oxacyclanone, polymer
with diisocyanatoalkane, and
alkyl-(substitutedalkyl)-
polyol, di-alkyl malonate-
and alkyl acetoacetate-
blocked, alkyl esters.
P-19-0071............................ 1 3/22/2019 CBI..................... (S) Physical property (G) Trimethylolpropane,
modifier for polymers. alkenoic acid, triester.
P-19-0072............................ 1 3/26/2019 CBI..................... (G) Raw material used in (S) 1-Butanol, reaction
chemical manufacture. products with 2-[(2-propen-1-
yloxy)- methyl] oxirane.
SN-18-0005A.......................... 3 3/3/2019 CBI..................... (G) Monomer for industrial (S) Butanoic acid, 3-mercapto-
adhesives, coatings and inks. ,1,1'-[2,2-bis[(3-mercapto-1-
oxobutoxy) methyl]-1,3-
propanediyl] ester.
SN-18-0013A.......................... 2 2/27/2019 CBI..................... (G) Intermediate............. (G) Lithiated metal oxide.
SN-18-0016A.......................... 4 3/20/2019 Hexion, Inc............. (G) Reactive polymer; (S) (G) Modified phenol-
Reactive polyol for formaldehyde resin.
composites; (S) Reactive
polyol for 2- part coatings;
(S) Reactive polyol for 1-
part coatings; (S) Reactive
polyol for sealants; (S)
Reactive modifier for bonded
abrasives; (S) Reactive
modifier for refractory; (S)
Reactive modifier for glass
inserts; (S) Reactive
modifier for coated
abrasives; (S) Reactive
modifier for friction; (S)
Reactive modifier for fiber
bonding; (S) Reactive
modifier for carbon (liquid
EPF); (S) Reactive modifier
for carbon (powder EPF).
--------------------------------------------------------------------------------------------------------------------------------------------------------
*The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided
with the submission prior to the start of the 90-day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table II--NOCs Approved * From 03/01/2019 to 03/31/2019
--------------------------------------------------------------------------------------------------------------------------------------------------------
Commencement If amendment, type of
Case No. Received date date amendment Chemical substance
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-07-0541A............................. 3/27/2019 11/14/2007 Generic chemical name (G) Diaminodiol, polymer with diisocyanate,
updated. polyether alcohol, polyether amine, benzyl
chloride-quaternized.
P-11-0294.............................. 3/5/2019 3/24/2014 N......................... (S) Carbonic dichloride, polymer with 4,4'-(1-
methylethylidene)bis(phenol) and 4,4'-(3,3,5-
trimethylcyclohexylidene)bis(phenol)), bis(4-(1,1-
dimethylethyl)phenyl) ester.
P-11-0450.............................. 2/28/2019 2/17/2019 N......................... (S) Fatty acids, carnauba-wax.
P-11-0451.............................. 2/28/2019 2/17/2019 N......................... (S) Fatty acids, carnauba wax, esters with 1,3-
butanediol;
(S) Fatty acids, Carnauba-wax, calcium salts.
P-11-0452.............................. 2/28/2019 2/17/2019 N......................... (S) Fatty acids, carnauba-wax, ethylene esters.
P-14-0382.............................. 3/8/2019 2/13/2019 N......................... (G) Quaternary ammonium compounds, tri-C8-10-
alkylmethyl, hydrogen sulfates.
[[Page 28810]]
P-16-0360.............................. 3/22/2019 3/17/2019 N......................... (S) Poly (oxy-1,2-ethanediyl), alpha- (1-
oxodocosyl)- omega- [(1-oxodocosyl)oxy]-.
P-16-0421.............................. 3/18/2019 2/20/2019 N......................... (S) Flue dust, glass manufacturing,
desulfurization.
P-17-0354.............................. 3/4/2019 2/4/2019 N......................... (G) (substituted-dialkyl(C=1~7)silyl)
alkanenitrile.
P-18-0030.............................. 3/22/2019 3/14/2019 N......................... (G) Poly[oxy(methyl-
alkylendiyl)],alpha,alpha',alpha''-1,2,3-
alkanetriyltris[omega-hydroxy-, polymer with 1,1'-
alkylenebis[4-isocyanatocarbomonocycle], 2-
substituted ethyl acrylate- and 2-substituted
ethyl metacrylate-blocked.
P-18-0123.............................. 3/6/2019 2/20/2019 N......................... (S) Hydrogen lithium nickel oxide.
P-18-0124.............................. 3/6/2019 2/21/2019 N......................... (S) Lithium nickel potassium oxide.
P-18-0136.............................. 3/22/2019 2/22/2019 N......................... (G) 1-Butanaminium,N,N,N-tributyl-,2(or5)-
[[benzoyldihydrodioxo[(sulfophenyl)amino]heteropol
ycycle]oxy]-5(or2)-(1,1-
dimethylpropyl)benzenesulfonate (2:1).
P-18-0233.............................. 3/4/2019 2/13/2019 N......................... (G) Alkyl Alkenoic acid, alkyl ester, telomer with
alkylthiol, substituted carbomonocycle,
substituted alkyl alkyl alkenoate and hydroxyalkyl
alkenoate, tert-butyl alkyl peroxoate-initiated.
P-18-0318.............................. 3/5/2019 3/4/2019 N......................... (S) 1-Octadecanaminium, N,N-dimethyl-N-[3-
(triethoxysilyl)propyl]- chloride.
--------------------------------------------------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided
with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that have passed an initial screening by EPA during
this time period: The EPA case number assigned to the test information;
the date the test information was received by EPA, the type of test
information submitted, and chemical substance identity.
Table III--Test Information Received From 03/01/2019 to 03/31/2019
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
P-08-0087................... 3/15/2019 Hydrolysis as a Function (OECD 111)..... (G) Alkyl acids,
reaction products with
metal salt of an
alkanol.
P-08-0508................... 3/25/2019 In Vitro Mammalian Cytogenetic Test (S) Propanoic acid,
(OECD 473), Mutagenicity Testing of H- 2,3,3,3-tetrafluoro-2-
2O421 in the Salmonella Typhimurium (1,1,2,2,3,3,3-
Plate Incorporation Assay (OECD 473), heptafluoropropoxy).
Combined Two-Week Inhalation Toxicity
and Micronucleus Studies, Thermal
Transformation Byproduct, Determination
of the Water Solubility and Vapor
Pressure of H-28327 (OECD 104-105),
Determination of the n-Octanol/Water
Partition Coefficient of H-28327 (OPPTS
830.7560).
P-08-0509................... 3/25/2019 In Vitro Mammalian Cytogenetic Test (S) Propanoic acid,
(OECD 473), Mutagenicity Testing of H- 2,3,3,3-tetrafluoro-2-
2O421 in the Salmonella Typhimurium (1,1,2,2,3,3,3-
Plate Incorporation Assay (OECD 473), heptafluoropropoxy)-,
Combined Two-Week Inhalation Toxicity ammonium salt (1:1).
and Micronucleus Studies, Thermal
Transformation Byproduct, Determination
of the Water Solubility and Vapor
Pressure of H-28327 (OECD 104-105),
Determination of the n-Octanol/Water
Partition Coefficient of H-28327 (OPPTS
830.7560).
P-10-0060................... 3/21/2019 Studies for Triggered Testing: (OECD (G) Partially
421), Modified One-Generation fluorinated alcohol
Reproduction Test (Mice) (OPPTS substituted glycol.
850.3050).
P-15-0450................... 3/20/2019 90-Day Inhalation Toxicity Study (OECD (G) Lithium mixed metal
413). oxide.
P-16-0543................... 3/14/2019 Exposure Monitoring Report.............. (G) Halogenophosphoric
acid metal salt.
P-18-0060................... 3/26/2019 Sediment and Soil Adsorption/Desorption (S) 1-butanaminium, 4-
Isotherm (OECD 106), Acute Dermal amino-N-(2-hydroxy-3-
Toxicity (OECD 402), Mammalian sulfopropyl)-N, N-
Erythrocyte Micronucleus Test (OECD dimethyl-4-oxo-, N-coco
474). alkyl derivs., inner
salts.
P-18-0093................... 3/1/2019 Dust Control, Analytical Test Results, (G) Pentacyclo
Water Immersion Testing, H2O Immersion [9.5.1.13,9.15,15.17,13
with Proton Pulse Sequence, Plastic ] octasiloxane,
Abrasions SEM Summary and SEM Images, 1,3,5,7,9,11,13,15-
Risks Identified in Focus Report. octakis
(polyfluoroalkyl).
P-18-0177................... 3/5/2019 Solubility in Alga Growth Media (OECD (S) Waxes and waxy
201). substances, rice bran,
oxidized.
P-18-0286................... 3/8/2019 Supplemental Worker Exposure............ (S) Propane, 1,1,1,3,3,3-
hexafluoro-2-methoxy.
P-18-0293................... 3/21/2019 In Vitro Skin Sensitization Assays (OECD (S) Propanedioic acid, 2-
422D). methyl- ene-, 1,3-
dihexyl ester.
P-18-0294................... 3/21/2019 In Vitro Skin Sensitization Assays (OECD (S) Propanedioic acid, 2-
422D). methyl- ene-, 1,3-
dicyclohexyl ester.
[[Page 28811]]
P-18-0325................... 3/18/2019 Fish Acute Toxicity (OECD 203), Daphnia (G) Benzenesulfonic
Acute Toxicity (OECD 202), Algae Acute acid, alkyl derivs.,
Toxicity (OECD 201), Acute Oral compds. with
Toxicity (OECD 401), Acute Dermal diisopropanolamine.
Toxicity (OECD 402), Dermal Irritation
(OECD 404), Eye Irritation (OECD 405),
Ready Biodegradability (OECD 301B),
Activated Sludge Respiration Inhibition
Tests (OECD 209), Ames Test (OECD 471),
Skin Sensitization (OECD 406),
Chromosome Aberration Test (OECD 473),
28-Day Oral Toxicity Study (OECD 407).
SN-18-0003.................. 3/5/2019 Algae Growth Inhibition Study (OECD 201) (S) Lithium nickel oxide
(LiNiO2).
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: June 6, 2019.
Megan Carroll,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2019-13099 Filed 6-19-19; 8:45 am]
BILLING CODE 6560-50-P