[Federal Register Volume 84, Number 100 (Thursday, May 23, 2019)]
[Rules and Regulations]
[Pages 23727-23728]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-10766]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Part 63
National Emission Standards for Hazardous Air Pollutants for
Source Categories
CFR Correction
In Title 40 of the Code of Federal Regulations, Part 63, 63.8980 to
end of part 63, revised as of July 1, 2018, make the following
corrections in Subpart UUUUU:
0
1. On page 188, in Sec. 63.10021, paragraph (e)(9) is revised to read
as follows:
Sec. 63.10021 How do I demonstrate continuous compliance with the
emission limitations, operating limits, and work practice standards?
* * * * *
(e) * * *
(9) Report the dates of the initial and subsequent tune-ups in hard
copy, as specified in Sec. 63.10031(f)(5), through June 30, 2020. On
or after July 1, 2020, report the date of all tune-ups electronically,
in accordance with Sec. 63.10031(f). The tune-up report date is the
date when tune-up requirements in paragraphs (e)(6) and (7) of this
section are completed.
* * * * *
0
2. On page 195, in Sec. 63.10031, paragraphs (f) introductory text,
(f)(1), (2), (4), and (f)(6) introductory text are revised to read as
follows:
Sec. 63.10031 What reports must I submit and when?
* * * * *
(f) On or after July 1, 2020, within 60 days after the date of
completing each performance test, you must submit the performance test
reports required by this subpart to the EPA's WebFIRE database by using
the Compliance and Emissions Data Reporting Interface (CEDRI) that is
accessed through the EPA's Central Data Exchange (CDX) (https://cdx.epa.gov). Performance test data must be submitted in the file
format generated through use of EPA's Electronic Reporting Tool (ERT)
(see https://www.epa.gov/ttn/chief/ert/index.html). Only data collected
using those test methods on the ERT website are subject to this
requirement for submitting reports electronically to WebFIRE. Owners or
operators who claim that some of the information being submitted for
performance tests is confidential business information (CBI) must
submit a complete ERT file including information claimed to be CBI on a
compact disk or other commonly used electronic storage media
(including, but not limited to, flash drives) to EPA. The electronic
media must be clearly marked as CBI and mailed to U.S. EPA/OAPQS/CORE
CBI Office, Attention: WebFIRE Administrator, MD C404-02, 4930 Old Page
Rd., Durham, NC 27703. The same ERT file with the CBI omitted must be
submitted to EPA via CDX as described earlier in this paragraph. At the
discretion of the delegated authority, you must also submit these
reports, including the confidential business information, to the
delegated authority in the format specified by the delegated authority.
(1) On or after July 1, 2020, within 60 days after the date of
completing each CEMS (SO2, PM, HCl, HF, and Hg) performance
evaluation test, as defined in Sec. 63.2 and required by this subpart,
you must submit the relative accuracy test audit (RATA) data (or, for
PM CEMS, RCA and RRA data) required by this subpart to EPA's WebFIRE
database by using CEDRI that is accessed through EPA's CDX (https://cdx.epa.gov). The RATA data shall be submitted in the file format
generated through use of EPA's Electronic Reporting Tool (ERT) (https://www.epa.gov/ttn/chief/ert/index.html). Only RATA data compounds listed
on the ERT website are subject to this requirement. Owners or operators
who claim that some of the information being submitted for RATAs is
confidential business information (CBI) shall submit a complete ERT
file including information claimed to be CBI on a compact disk or other
commonly used electronic storage media (including, but not limited to,
flash drives) by registered letter to EPA and the same ERT file with
the CBI omitted to EPA via CDX as described earlier in this paragraph.
The compact disk or other commonly used electronic storage media shall
be clearly marked as CBI and mailed to U.S. EPA/OAPQS/CORE CBI Office,
Attention: WebFIRE Administrator, MD C404-02, 4930 Old Page Rd.,
Durham, NC 27703. At the discretion of the delegated authority, owners
or operators shall also submit these RATAs to the delegated authority
in the format specified by the delegated authority. Owners or operators
shall submit calibration error testing, drift checks, and other
information required in the performance evaluation as described in
Sec. 63.2 and as required in this chapter.
(2) On or after July 1, 2020, for a PM CEMS, PM CPMS, or approved
alternative monitoring using a HAP metals CEMS, within 60 days after
the reporting periods ending on March 31st, June 30th, September 30th,
and December 31st, you must submit quarterly reports to the EPA's
WebFIRE database by using the CEDRI that is accessed through the EPA's
CDX (https://cdx.epa.gov). You must use the appropriate electronic
reporting form in CEDRI or provide an alternate electronic file
consistent with EPA's reporting form output format. For each reporting
period, the quarterly reports must include all of the calculated 30-
boiler operating day rolling average values derived from the CEMS and
PM CPMS.
* * * * *
(4) On or after July 1, 2020, submit the compliance reports
required under paragraphs (c) and (d) of this section and the
notification of compliance status required under Sec. 63.10030(e) to
the EPA's WebFIRE database by using the CEDRI that is accessed through
the EPA's CDX (https://cdx.epa.gov). You must use the appropriate
electronic reporting form in CEDRI or provide an alternate electronic
file consistent with EPA's reporting form output format.
* * * * *
(6) Prior to July 1, 2020, all reports subject to electronic
submittal in paragraphs (f) introductory text, (f)(1), (2), and (4) of
this section shall be submitted to the EPA at the frequency specified
in those paragraphs in electronic portable document format (PDF) using
the ECMPS Client Tool. Each PDF version of a submitted report must
include sufficient information to
[[Page 23728]]
assess compliance and to demonstrate that the testing was done
properly. The following data elements must be entered into the ECMPS
Client Tool at the time of submission of each PDF file:
* * * * *
[FR Doc. 2019-10766 Filed 5-22-19; 8:45 am]
BILLING CODE 1301-00-D