[Federal Register Volume 84, Number 65 (Thursday, April 4, 2019)]
[Notices]
[Pages 13287-13293]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-06557]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2018-0409; FRL-9990-57]
Certain New Chemicals; Receipt and Status Information for October
2018
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 10/01/
2018 to 10/31/2018.
DATES: Comments identified by the specific case number provided in this
document must be received on or before May 6, 2019.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2018-0409, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at http://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at http://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Information
Management Division (7407M), Office of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington,
DC 20460-0001; telephone number: (202) 564-8593; email address:
[email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 10/01/2018 to 10/31/2018. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be
either an ``existing'' chemical substance or a
[[Page 13288]]
``new'' chemical substance. Any chemical substance that is not on EPA's
TSCA Inventory of Chemical Substances (TSCA Inventory) is classified as
a ``new chemical substance,'' while a chemical substance that is listed
on the TSCA Inventory is classified as an ``existing chemical
substance.'' (See TSCA section 3(11).) For more information about the
TSCA Inventory go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: http://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995 (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs received by EPA during this period, Table I
provides the following information (to the extent that such information
is not subject to a CBI claim) on the notices received by EPA during
this period: The EPA case number assigned to the notice that indicates
whether the submission is an initial submission, or an amendment, a
notation of which version was received, the date the notice was
received by EPA, the submitting manufacturer (i.e., domestic producer
or importer), the potential uses identified by the manufacturer in the
notice, and the chemical substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Received From 10/01/2018 to 10/31/2018
----------------------------------------------------------------------------------------------------------------
Case No. Version Received date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
J-19-0001............ 2 10/5/2018 Xyleco.......... (S) Used to produce (S) Trichoderma
enzymes which will reesei 3AX3-9.
be used to
saccharify
agricultural waste
to simple sugars.
J-19-0002............ 1 10/5/2018 CBI............. (G) Used for the (G) Genetically
manufacture of a modified
chemical. microorganism.
[[Page 13289]]
J-19-0003............ 1 10/5/2018 CBI............. (G) Used for the (G) Genetically
manufacture of a modified
chemical. microorganism.
J-19-0004............ 1 10/5/2018 CBI............. (G) Used for the (G) Genetically
manufacture of a modified
chemical. microorganism.
P-18-0235A........... 5 10/3/2018 CBI............. (S) Component in (G) Naphtha Oils.
automotive gasoline/
transportation fuel
for consumer use.
P-18-0309............ 7 10/19/2018 Highland (G) Latex applied to (G) alkanedioic acid,
Logistics, LLC. textiles for anti- 2-alkylene-, polymer
odor and anti- with
microbial polyhaloaromatic
applications. arylate, sodium
salt, hydroxyalkyl
alkanoate, alkanoic
acid, alkenyl-
hydroxypoly(oxy-1,2-
ethanediyl-
alkenyloxymethylalky
oxy polyoxy-1,2-
ethandiyl.
P-18-0341............ 2 10/11/2018 CBI............. (G) Component in (G) Alkane
coatings. dicarboxylic acid,
polymer with
alkoxylated
polyalcohol, alkyl
polyglycol, alkyl
dialcohol, and
functionalized
carboxylic acid.
P-18-0342............ 2 10/11/2018 CBI............. (G) Component in (G) Alkane
coatings. dicarboxylic acid,
polymer with alkyl
polyglycol, alkyl
dialcohol, and
functionalized
carboxylic acid.
P-18-0343............ 2 10/11/2018 CBI............. (G) Component in (G) Alkane
coatings. dicarboxylic acid,
polymer with
alkoxylated
polyalcohol, and
alkyl dialcohol,
(hydroxy alkyl)
ester.
P-18-0344............ 2 10/11/2018 CBI............. (G) Component in (G) Aromatic
coatings. dicarboxylic acid,
polymer with alkane
dicarboxylic acid,
alkoxylated
polyalcohol, and
alkyl dialcohol.
P-18-0365............ 3 10/30/2018 CBI............. (G) Superabsorbent (G) Starch,
polymer; (S) carboxymethyl ether,
Manufacture for sodium salt, polymer
export only. with polycarboxylic
acid.
P-18-0366............ 3 10/30/2018 CBI............. (G) Superabsorbent (G) Starch,
polymer; (S) carboxymethyl ether,
Manufacture for sodium salt, polymer
export only. with mixed
polycarboxylic
acids.
P-18-0368............ 2 10/15/2018 CBI............. (G) Surfactant; (G) (G)
Protectant. Polyfluoroalkanesulf
onamido-
(hydroxyethyl)-,
phosphate ester
compounds, amine
salts.
P-18-0372............ 2 10/10/2018 Hexion Inc...... (G) Polyol; (S) (G) Formaldehyde,
Reactive modifier polymer with phenol
for Carbon; (S) and heteroatom-
Reactive modifier substituted
for Fiber bonding; heteromonocycle,
(S) Reactive reaction products
modifier for with 1,3-dioxolan-2-
Friction; (S) one and 4-methyl-1,3-
Reactive modifier dioxolan-2-one.
for Coated
abrasives; (S)
Reactive modifier
for Glass Inserts;
(S) Reactive
Modifier for
Refractory; (S)
Reactive modifier
for Bonded
abrasives; (S)
Reactive polyol for
Sealants; (S)
Reactive polyol for
Adhesives; (S)
Reactive polyol for
1 part coatings; (S)
Reactive polyol for
2 part coatings; (S)
Reactive polyol for
composites; (G)
Polyol.
P-18-0373............ 2 10/10/2018 Hexion Inc...... (G) Polyol; (S) (G) Formaldehyde,
Reactive modifier polymer with 2-
for carbon; (S) methyloxirane,
Reactive modifier oxirane, phenol and
for friction; (S) heteroatom-
Reactive modifier substituted
for fiber bonding; heteromonocycle.
(S) Reactive
modifier for coated
abrasives; (S)
Reactive modifier
for glass inserts;
(S) Reactive
modifier for
refractory; (S)
Reactive modifier
for bonded
abrasives; (S)
Reactive polyol for
sealants; (S)
Reactive polyol for
adhesives; (S)
Reactive polyol for
1-part coatings; (S)
Reactive polyol for
2-part coatings; (S)
Reactive polyol for
composites; (G)
Polyol.
P-18-0374............ 3 10/18/2018 Evonik (S) Additive in a (G) Cationic
Corporation. water-borne coating aminomodified
formulation; (S) alkylpolysiloxane.
Glass fiber sizing;
(S) Fillers,
pigments and glass
bead treatment.
P-18-0375............ 3 10/10/2018 Pulcra (S) The PMN substance (S) Fats and
Chemicals, LLC. will be imported as Glyceridic oils,
part of an aqueous vegetable,
emulsion containing sulfonated, sodium
about 10 to 25 salts.
percent PMN
substance with
lubricant oils,
nonionic surfactants
and anionic
surfactants. The
emulsion will be
used in the fat
liquoring stage in
the production of
leather.
P-18-0376............ 1 10/10/2018 Sumitomo (S) Substance used to (G) Thiosulfuric
Chemical improve physical acid, aminoalkyl
Advanced properties in rubber ester.
Technologies, products.
LLC.
P-18-0378............ 2 10/4/2018 CBI............. (G) Industrial (G) Acrylic and
coatings additive. Methacrylic acids
and esters, polymer
with
alkenylimidazole,
alkyl polyalkylene
glycol,
alkenylbenzene,
alkylbenzeneperoxoic
acid ester
initiated, compds.
with
Dialkylaminoalkanol.
P-18-0380............ 3 10/12/2018 CBI............. (G) Automotive brake (G) Butanoic acid
parts (contained ethyl amine.
use).
P-18-0392............ 4 10/15/2018 CBI............. (G) Intermediate (G) Heteromonocycle,
chemical. alkenyl alkyl.
[[Page 13290]]
P-18-0404............ 2 10/19/2018 Gurit (USA), Inc (S) The substance is (G)
part of a mixture alkylmultiheteroatom
with other amines to ,2-
act as a curative functionalisedalkyl-
for a 2-part epoxy 2-hydroxyalkyl-,
formulation. The polymer with
intended use is the alkylheteroatom-
manufacture of wind multialkylfunctional
turbine blades. ised
During manufacture carbomonocyleheteroa
of the blades this tom and
substance forms part multiglycidylether
of the in-mold difunctionalised
coating system which polyalkylene glycol.
is applied to the
blade mold and
further laminated
with glass (or
carbon) reinforced
fibres (GRP). The
manufactured
structure is then
`cured' using heat
and a chemical
reaction occurs
forming a solid
composite structure.
P-18-0404A........... 3 10/30/2018 Gurit (USA), Inc (S) The substance is (G)
part of a mixture alkylmultiheteroatom
with other amines to ,2-
act as a curative functionalisedalkyl-
for a 2-part epoxy 2-hydroxyalkyl-,
formulation. The polymer with
intended use is the alkylheteroatom-
manufacture of wind multialkylfunctional
turbine blades. ised
During manufacture carbomonocyleheteroa
of the blades this tom and
substance forms part multiglycidylether
of the in-mold difunctionalised
coating system which polyalkylene glycol.
is applied to the
blade mold and
further laminated
with glass (or
carbon) reinforced
fibres (GRP). The
manufactured
structure is then
`cured' using heat
and a chemical
reaction occurs
forming a solid
composite structure.
P-19-0001............ 2 10/1/2018 Burgess Pigment (G) Filler for (G) Aluminum silicate
Company. plastic. clay treated with
siloxane (vinyl
functionality).
P-19-0002............ 3 10/10/2018 CBI............. (S) Chemical (G) Polyaromatic
Intermediate. symmetrical
tetracarboxylic
acid.
P-19-0003............ 2 10/19/2018 Sabic Innovative (S) Chemical (G) Polyaromatic
Plastics US, Intermediate. ether symmetrical
LLC. dicarboxylic
anhydride.
P-19-0004............ 2 10/19/2018 Sabic Innovative (G) Molded parts and (G) Aromatic
Plastics US, components. dianhydride, polymer
LLC. with aromatic
diamine and
heteroatom bridged
aromatic diamine,
reaction products
with aromatic
anhydride.
P-19-0005............ 1 10/2/2018 CBI............. (S) Adhesive for (G) Phenol-
automotive parts. formaldehyde epoxy,
polymer with an
alkyl polyether
polysulfide.
P-19-0006............ 1 10/9/2018 CBI............. (G) Open, non- (G) Diisocyanate
dispersive use. polymer blocked with
alkoxyamine.
P-19-0007............ 1 10/16/2018 Allnex USA, Inc. (S) Coating resin (G) Alkenoic acid,
binder. alkyl-, hydroxyalkyl
ester, polymer with
alkyl-alkenoate,
alkenylcarbomonocycl
e, hydroxyalkyl-
alkenoate, alkyl
substituted
alkenoate,
heteromonocycle and
alkenoic acid,
alkylperoxoate-
initiated.
P-19-0007A........... 2 10/25/2018 Allnex USA, Inc. (S) Coating resin (G) Alkenoic acid,
binder. alkyl-, hydroxyalkyl
ester, polymer with
alkyl-alkenoate,
alkenylcarbomonocycl
e, hydroxyalkyl-
alkenoate, alkyl
substituted
alkenoate,
heteromonocycle and
alkenoic acid,
alkylperoxoate-
initiated.
P-19-0008............ 1 10/22/2018 Allnex USA, Inc. (S) The PMN substance (G) Substitued
is an isolated polyalkylenepolycarb
intermediate omonocycle ester,
incorporated as a polymer with
component in several dialkanolamine,
allnex coating resin (hydroxyalkoxy)carbo
products used as nyl] derivs.,
additives for (alkoxyalkoxy)
corrosion protection. alkanol-blocked.
P-19-0009............ 1 10/23/2018 Allnex USA, Inc. (S) The PMN substance (G) Carbonmonocycles,
is used as a coating polymer with
resin additive for haloalkyl
corrosion protection. substituted
heteromonocycle and
hydro-
hydroxypoly[oxy(alky
l-alkanediyl)],
dialkyl-
alkanediamine-
terminated,
hydroxyalkylated,
acetates (salts).
P-19-0010............ 1 10/29/2018 Ashland, Inc.... (G) Adhesive......... (G) Hydrogenated
fatty acid dimers,
polymers with 1,1'-
methylenebis[4-
isocyanatobenzene],
polypropylene
glycol,
polypropylene glycol
ether with
trimethylolpropane
(3:1), and 1,3-
propanediol,
propylene glycol
monomethacrylate-
blocked.
[[Page 13291]]
SN-18-0016........... 2 10/10/2018 Hexion Inc...... (S) Reactive modifier (G) Modified phenol-
for glass inserts; formaldehyde resin.
(S) Reactive
modifier for
refractory; (S)
Reactive modifier
for bonded
abrasives; (S)
Reactive polyol for
sealants; (S)
Reactive polyol for
adhesives; (S)
Reactive polyol for
1 part coatings; (S)
Reactive polyol for
2 part coatings; (S)
Reactive polyol for
composites; (G)
Reactive polymer;
(G) Reactive
polymer; (S)
Reactive modifier
for carbon (powder
EPF); (S) Reactive
modifier for carbon
(liquid EPF); (S)
Reactive modifier
for fiber bonding;
(S) Reactive
modifier for
friction; (S)
Reactive modifier
for coated abrasives.
----------------------------------------------------------------------------------------------------------------
In Table II. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
received by EPA during this period: The EPA case number assigned to the
NOC including whether the submission was an initial or amended
submission, the date the NOC was received by EPA, the date of
commencement provided by the submitter in the NOC, a notation of the
type of amendment (e.g., amendment to generic name, specific name,
technical contact information, etc.) and chemical substance identity.
Table II--NOCs Received From 10/01/2018 to 10/31/2018
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type of
Case No. Received date date amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
J-18-0006.................. 10/24/2018 09/25/2018 ..................... (G) Biofuel-producing
modified
microorganism(s), with
chromosomally-borne
modifications.
J-18-0008.................. 10/15/2018 09/12/2018 ..................... (G) Biofuel-producing
modified
microorganism(s), with
chromosomally-borne
modifications.
P-11-0432A................. 10/02/2018 09/10/2018 The chemical name and (S)
CASRN submitted were Tricyclo[7.3.3.15,11]hept
not in agreement asiloxane-3,7,14-triol,
with the original 1,3,5,7,9,11,14-
PMN submission (P- heptakis(2,4,4-
110432). trimethylpentyl)-.
P-13-0071.................. 10/29/2018 10/01/2018 ..................... (G) Fatty acid amide
chlorides.
P-14-0092.................. 10/29/2018 10/01/2018 ..................... (G) Fatty acid amide
chloride.
P-15-0353.................. 10/05/2018 09/27/2018 ..................... (S) Fatty acids, c16 and
c18-unsaturated, methyl
esters, chlorinated.
P-15-0437.................. 10/16/2018 10/12/2018 ..................... (G) Flexible polyurethane
methacrylate resin.
P-16-0207.................. 10/18/2018 09/12/2018 ..................... (G) Spiro
tetrafluoroborate.
P-16-0483.................. 10/23/2018 10/17/2018 ..................... (G) Inorganic acids, metal
salts, cmpds with
modified hetereoaromatic
casrn.
P-17-0007A................. 10/08/2018 09/20/2018 Updated generic name. (G) Dialkyl 7,10-dioxa,
dithiahexadeca diene.
P-17-0207.................. 10/04/2018 09/17/2018 ..................... (G) 2-alkenoic acid, 2-
alkyl-, 2-alkyl ester,
polymer with alkyl 2-
alkenoate, vinyl
carbomonocyle,
substituted alkyl 2-alkyl-
2-alkenoate and alkyl 2-
alkyl-2-alkenoate,
tertiary alkyl peroxide-
initiated.
P-17-0329.................. 10/30/2018 10/26/2018 ..................... (S) Ethanone, 1-[4-(4-
chlorophenoxy)-2-
(trifluoromethyl)phenyl]-
.
P-17-0334.................. 10/04/2018 09/28/2018 ..................... (S) Benzamide, 2-
(trifluoromethyl)-.
P-18-0040.................. 10/11/2018 10/10/2018 ..................... (G) Alkanedioic acid,
polymers with alkanoic
acid-dipentaerythritol
reaction products,
substituted alkanedioc
acid, substituted
alkanoic acid, isocyanato-
(isocyanatoalkyl)-alkyl
substituted carbomoncycle
and alkyl substituted
alkanediol.
P-18-0042.................. 10/09/2018 10/05/2018 ..................... (S) 2,5-furandione,
polymer with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol,
3a,4,5,6,7,7a-hexahydro-
4,7-methano-1h-inden-5(or
6)-yl ester, ester with
2,3-dihydroxypropyl
neodecanoate, polymer
with 5-isocyanato-1-
(isocyanatomethyl)-1,3,3-
trimethylcyclohexane, 2-
hydroxyethyl acrylate-
and 2-hydroxyethyl
methacrylate-blocked.
P-18-0100.................. 10/11/2018 10/09/2018 ..................... (G) Substituted alkanoic
acid, polymer with
alkylcarbonate,
alkanediols and
isocyanate substituted
carbomonocycles, sodium
salt, alkenoic acid
substituted polyol
reaction products-
blocked.
----------------------------------------------------------------------------------------------------------------
[[Page 13292]]
In Table III. of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information received by EPA during this time period: The EPA case
number assigned to the test information; the date the test information
was received by EPA, the type of test information submitted, and
chemical substance identity.
Table III--Test Information Received From 10/01/2018 to 10/31/2018
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
P-87-1436...................... 10/3/2018 QSAR Assessment Report on Vinyl (S) Dodecanoic acid, ethenyl
Laurate; Skin Sensitization: ester.
Local Lymph Node Assay (OECD
TG 429); Repeated Dose 90-Day
Oral Toxicity in Rodents (OECD
TG 408); Repeated Dose
Toxicity and Repro/Devel
Toxicity Screening (OECD TG
422); Chromosome Aberration
Test (OECD TG 473); Gene
Mutation Assay (OECD TG 476);
Micronucleus Test (OECD TG
474); Prenatal Developmental
Toxicity Study (OECD TG 414);
Aquatic Toxicity--Daphnia
(OECD TG 202); Aquatic
Toxicity--Daphnia Reproductive
(OECD TG 211); Aquatic
Toxicity--Algal Growth (OECD
TG 201); Ready
Biodegradability (OECD TG
301); Dermal Irritation/
Corrosion (OECD TG 404);
Bacterial Reverse Mutation
Assay--Ames Test (OECD 471);
Fish Acute Toxicity (OECD TG
203); Activated Sludge Test
(OECD TG 209); Acute Oral
Toxicity (OECD TG 401); Acute
Eye Irritation (OECD TG 405);
Acute Dermal Toxicity (OECD TG
402), Site WWT Discharge
Permit, Flow Chart of the
existing Calvert City Waste
Water process system.
P-18-0300...................... 10/8/2018 Activated Sludge (ISO 18749), (G) Heteromonocycle, alkenoic
Acute Oral Toxicity (OECD 1:1 salt, polymer with alpha-
423), AMES Test (OECD 471), (2-methyl-1-oxo-2-propen-1-
Skin Sensitization-Buehler y)l-omegamethoxypoly(oxy-1,2-
Test (OECD 406), Ready ethanediyl) and ethylalkenoic
Biodegradability (OECD 301A). acid.
P-18-0051...................... 10/11/2018 Hydrolysis as a Function of pH. (G) Alkenoic acid, reaction
products with
[Oxybis(alkylene)]bis[(substi
tuted alkyl)-alkanediol],
polymers with
isocyanatoalkane and
substituted alkanoic acid,
substituted monoacrylate
alkanoate-blocked.
P-18-0126...................... 10/12/2018 Activated Sludge, Respiration (S) Calcium manganese titanium
Inhibition Test (Carbon and oxide.
Ammonium Oxidation) (OECD
209), Algae Growth Inhibition
Study in Pseudokirchneriella
subcapitata (OECD 201), 48-
hour Acute Immobilization
Study in Daphnia magna (OECD
202).
SN-18-0013..................... 10/15/2018 Particle Size Distribution..... (G) Lithiated metal oxide.
P-18-0270-0271................. 10/18/2018 Algae Acute Toxicity (OCSPP (G) Ethanol, 2-butoxy-, 1,1'-
850.5400), Daphnia Acute ester
Toxicity (OCSPP 850.1010, Fish (G) 2-Propanol, 1-butoxy-,
Acute Toxicity (OCSPP 2,2'-ester.
850.1075), Algae Acute
Toxicity (OCSPP 850.5400),
Daphnia Acute Toxicity (OCSPP
850.1010), Fish Acute Toxicity
(OCSPP 850.1075).
P-15-0054...................... 10/24/2018 Physical Chemistry Data (Year 3 (S) Carbon Nanotube.
Reporting):.
TEM, SEM, AFM Raman...
XPS ICP ESD...........
XRD Zeta Potential....
P-16-0543...................... 10/24/2018 Exposure Monitoring Report (G) halogenophosphoric acid
(September 27). metal salt.
P-18-0309...................... 10/26/2018 Skin Irritation (OECD 404)..... (G) alkanedioic acid, 2-
alkylene-, polymer with
polyhaloaromatic arylate,
sodium salt, hydroxyalkyl
alkanoate, alkanoic acid,
alkenyl-hydroxypoly(oxy-1,2-
ethanediyl-
alkenyloxymethylalkyoxy
polyoxy-1,2-ethandiyl.
P-17-0187...................... 10/26/2018 Skin Irritation (OECD 404)..... (G) Polymer with benzoic acid
tetra halogen hydroxy
tetrahalogen oxo H xanthenyl
alkenylaryl alkyl ester
alkalai metal salt, butyl-2-
propenoate, ethenyl
neodecanoate, methyl-2-methyl-
2- propenoate and 2-methyl-2-
propenoic acid.
----------------------------------------------------------------------------------------------------------------
[[Page 13293]]
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: March 19, 2019.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2019-06557 Filed 4-3-19; 8:45 am]
BILLING CODE 6560-50-P