[Federal Register Volume 83, Number 247 (Thursday, December 27, 2018)]
[Notices]
[Pages 66704-66705]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-27959]


=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2014-0079; FRL-9988-08-OEI]


Information Collection Request Submitted to OMB for Review and 
Approval; Comment Request; NESHAP for Wet-Formed Fiberglass Mat 
Production (Renewal)

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency (EPA) has submitted an

[[Page 66705]]

information collection request (ICR), NESHAP for Wet-formed Fiberglass 
Mat Production (EPA ICR Number 1964.09; OMB Control Number 2060-0496), 
to the Office of Management and Budget (OMB) for review and approval in 
accordance with the Paperwork Reduction Act. This is a proposed 
extension of the ICR, which is currently approved through December 31, 
2018. Public comments were previously requested via the Federal 
Register on June 29, 2017 during a 60-day comment period. This notice 
allows for an additional 30 days for public comments. A fuller 
description of the ICR is given below, including its estimated burden 
and cost to the public. An agency may not conduct or sponsor and a 
person is not required to respond to a collection of information unless 
it displays a currently valid OMB control number.

DATES: Additional comments may be submitted on or before January 25, 
2019.

ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2014-0079, to (1) EPA online using www.regulations.gov (our 
preferred method), by email to [email protected], or by mail to: EPA 
Docket Center, Environmental Protection Agency, Mail Code 28221T, 1200 
Pennsylvania Ave. NW, Washington, DC 20460, and (2) OMB via email to 
[email protected]. Address comments to OMB Desk Officer for 
EPA.
    EPA's policy is that all comments received will be included in the 
public docket without change including any personal information 
provided, unless the comment includes profanity, threats, information 
claimed to be Confidential Business Information (CBI) or other 
information whose disclosure is restricted by statute.

FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, 
Assistance, and Media Programs Division, Office of Compliance, Mail 
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, 
Washington, DC 20460; telephone number: (202) 564-2970; fax number: 
(202) 564-0050; email address: [email protected].

SUPPLEMENTARY INFORMATION: Supporting documents, which explain in 
detail the information that the EPA will be collecting, are available 
in the public docket for this ICR. The docket can be viewed online at 
www.regulations.gov or in person at the EPA Docket Center, EPA West, 
Room 3334, 1301 Constitution Ave. NW, Washington, DC. The telephone 
number for the Docket Center is 202-566-1744. For additional 
information about EPA's public docket, visit http://www.epa.gov/dockets.
    Abstract: The NESHAP apply to wet-formed fiberglass mat production 
facilities that emit greater than or equal to 10 tons per year (tpy) of 
any one hazardous air pollutant (HAP) or greater than or equal to 25 
tpy of any combination of HAP. Affected sources include new and 
existing drying and curing ovens. New facilities include those that 
commenced construction or reconstruction after the original date of 
proposal (May 26, 2000). The NESHAP standards require initial 
notifications, performance tests, and seminannual reports by the 
owners/operators of the affected facilities. They are also required to 
maintain records of the occurrence and duration of any startup, 
shutdown, or malfunction in the operation of an affected facility, or 
any period during which the monitoring system is inoperative. These 
notifications, reports, and records are essential in determining 
compliance, and are required of all sources subject to NESHAP 
standards.
    Form Numbers: None.
    Respondents/affected entities: New and existing drying and curing 
ovens at wet-formed fiberglass mat production facilities.
    Respondent's obligation to respond: Mandatory (40 CFR 63 Subpart 
HHHH).
    Estimated number of respondents: 7 (total).
    Frequency of response: Initial, semiannual.
    Total estimated burden: 1,470 hours (per year). Burden is defined 
at 5 CFR 1320.3(b).
    Total estimated cost: $95,500 (per year), includes $0 annualized 
capital or operation & maintenance costs.
    Changes in the Estimates: The adjustment decrease in burden from 
the most recently approved ICR is due to a decrease in the number of 
sources from 14 to 7, based on the Agency's evaluation of the source 
category as part of the residual risk and technology review (RTR). 
Additionally, the amendments to the NESHAP for Wet-Formed Fiberglass 
Mat Production (40 CFR, Part 63, Subpart HHHH) addressed in this ICR 
(1) adjust references to the Part 63 General Provisions (40 CFR, Part 
63, Subpart A) and revise provisions in the NESHAP (40 CFR part 63, 
Subpart HHHH) to remove the SSM exemption and SSM plan and periodic 
report requirements; (2) require electronic submittal of performance 
test results; (3) reduce the frequency of compliance reports from a 
quarterly basis to a semiannual basis when there are deviations from 
applicable standards; and (4) reduce the parameter monitoring and 
recording requirements during use of binder containing no HAP.

Courtney Kerwin,
Director, Regulatory Support Division.
[FR Doc. 2018-27959 Filed 12-26-18; 8:45 am]
BILLING CODE 6560-50-P