[Federal Register Volume 83, Number 246 (Wednesday, December 26, 2018)]
[Notices]
[Pages 66311-66312]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-27856]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2009-0026]


Curtis-Straus LLC: Application for Expansion of Recognition

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In this notice, OSHA announces the application of Curtis-
Straus LLC for expansion of recognition as a Nationally Recognized 
Testing Laboratory (NRTL) and presents the agency's preliminary finding 
to grant the application.

DATES: Submit comments, information, and documents in response to this 
notice, or requests for an extension of time to make a submission, on 
or before January 10, 2019.

ADDRESSES: Submit comments by any of the following methods:
    Electronically: You may submit comments and attachments 
electronically at: https://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, Docket No. OSHA-2009-0026, 
Occupational Safety and Health Administration, U.S. Department of 
Labor, Room N-3653, 200 Constitution Avenue NW, Washington, DC 20210. 
Deliveries (hand, express mail, messenger, and courier service) are 
accepted during the Docket Office's normal business hours, 10:00 a.m. 
to 3:00 p.m., ET.
    Instructions: All submissions must include the agency name and OSHA 
docket number (OSHA-2009-0026). All comments, including any personal 
information you provide, are placed in the public docket without 
change, and may be made available online at https://www.regulations.gov. For further information on submitting comments, 
see the ``Public Participation'' heading in the section of this notice 
titled SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other material in the 
docket, go to https://www.regulations.gov or the OSHA Docket Office at 
the above address. All documents in the docket (including this Federal 
Register notice) are listed in the https://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download through the website. All submissions, 
including copyrighted material, are available for inspection at the 
OSHA Docket Office.
    Extension of comment period: Submit requests for an extension of 
the comment period on or before January 10, 2019 to the Office of 
Technical Programs and Coordination Activities, Directorate of 
Technical Support and Emergency Management, Occupational Safety and 
Health Administration, U.S. Department of Labor, 200 Constitution 
Avenue NW, Room N-3653, Washington, DC 20210, or by fax to (202) 693-
1644.

FOR FURTHER INFORMATION CONTACT: Information regarding this notice is 
available from the following sources:
    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office 
of Communications, U.S. Department of Labor, telephone: (202) 693-1999; 
email: [email protected].
    General and technical information: Contact Mr. Kevin Robinson, 
Director, Office of Technical Programs and Coordination Activities, 
Directorate of Technical Support and Emergency Management, Occupational 
Safety and Health Administration, U.S. Department of Labor, phone: 
(202) 693-2110 or email: [email protected].

SUPPLEMENTARY INFORMATION: 

I. Notice of the Application for Expansion

    OSHA is providing notice that Curtis-Straus LLC (CSL), is applying 
for expansion of recognition as a NRTL. CSL requests the addition of 
one test standard to the NRTL scope of recognition.
    OSHA recognition of a NRTL signifies that the organization meets 
the requirements specified in 29 CFR 1910.7. Recognition is an 
acknowledgment that the organization can perform independent safety 
testing and certification of the specific products covered within the 
scope of recognition. Each NRTL's scope of recognition includes (1) the 
type of products the NRTL may test, with each type specified by the 
applicable test standard; and (2) the recognized site(s) that has/have 
the technical capability to perform the product-testing and product-
certification activities for test standards within the NRTL's scope. 
Recognition is not a delegation or grant of government authority; 
however, recognition enables employers to use products approved by the 
NRTL to meet OSHA standards that require product testing and 
certification.
    The agency processes applications by a NRTL for initial recognition 
and for an expansion or renewal of this recognition, following 
requirements in Appendix A to 29 CFR 1910.7. This appendix requires 
that the agency publish two notices in the Federal Register in 
processing an application. In the first notice, OSHA announces the 
application and provides a preliminary finding. In the second notice, 
the agency provides the final decision on the application. These 
notices set forth the NRTL's scope of recognition or modifications of 
that scope. OSHA maintains an informational web page for each NRTL, 
including CSL, which details the NRTL's scope of recognition. These 
pages are available from the OSHA website at http://www.osha.gov/dts/otpca/nrtl/index.html.
    CSL currently has one facility (site) recognized by OSHA for 
product testing and certification, with headquarters located at: 
Curtis-Straus LLC, One Distribution Circle, Suite #1, Littleton, MA 
01460. A complete list of CSL's scope of recognition is available at 
https://www.osha.gov/dts/otpca/nrtl/csl.html.

II. General Background on the Application

    CSL submitted an application, dated January 2, 2018 (OSHA-2009-
0026-0079), to expand recognition to include one additional test 
standard. OSHA staff

[[Page 66312]]

performed a detailed analysis of the application packet and reviewed 
other pertinent information. OSHA did not perform any on-site reviews 
in relation to this application.
    Table 1 lists the appropriate test standard found in CSL's 
application to expand for testing and certification of products under 
the NRTL Program.

 Table 1--Proposed List Appropriate Test Standard for Inclusion in CSL's
                        NRTL Scope of Recognition
------------------------------------------------------------------------
               Test standard                     Test standard title
------------------------------------------------------------------------
UL 962....................................  Household and Commercial
                                             Furnishings.
------------------------------------------------------------------------

III. Preliminary Findings on the Application

    CSL submitted an acceptable application for expansion of the scope 
of recognition. OSHA's review of the application file, and pertinent 
documentation, indicates CSL can meet the requirements prescribed by 29 
CFR 1910.7 for expanding recognition to include the addition of this 
one test standard for NRTL testing and certification listed above. This 
preliminary finding does not constitute an interim or temporary 
approval of CSL's application.
    OSHA welcomes public comment as to whether CSL meets the 
requirements of 29 CFR 1910.7 for expansion of recognition as a NRTL. 
Comments should consist of pertinent written documents and exhibits. 
Commenters needing more time to comment must submit a request in 
writing, stating the reasons for the request. Commenters must submit 
the written request for an extension by the due date for comments. OSHA 
will limit any extension to 10 days unless the requester justifies a 
longer period. OSHA may deny a request for an extension if the request 
is not adequately justified. To obtain or review copies of the exhibits 
identified in this notice, as well as comments submitted to the docket, 
contact the Docket Office, Room N-2625, Occupational Safety and Health 
Administration, U.S. Department of Labor, at the above address. These 
materials also are available online at http://www.regulations.gov under 
Docket No. OSHA-2009-0026.
    OSHA staff will review all comments to the docket submitted in a 
timely manner. After addressing the issues raised by these comments, 
the agency will make a recommendation to the Assistant Secretary for 
Occupational Safety and Health whether to grant CSL's application for 
expansion of the scope of recognition. The Assistant Secretary will 
make the final decision on granting the application. In making this 
decision, the Assistant Secretary may undertake other proceedings 
prescribed in Appendix A to 29 CFR 1910.7.
    OSHA will publish a public notice of its final decision in the 
Federal Register.

IV. Authority and Signature

    Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational 
Safety and Health, authorized the preparation of this notice. 
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 
2012), and 29 CFR 1910.7.

    Signed at Washington, DC, on December 18, 2018.
Loren Sweatt,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2018-27856 Filed 12-21-18; 8:45 am]
BILLING CODE 4510-26-P