[Federal Register Volume 83, Number 231 (Friday, November 30, 2018)]
[Notices]
[Page 61628]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-25771]


=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2014-0097 FRL-9986-26-OEI]


Information Collection Request Submitted to OMB for Review and 
Approval; Comment Request; NESHAP for Plating and Polishing Area 
Sources (Renewal)

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency (EPA) has submitted an 
information collection request (ICR), NESHAP for Plating and Polishing 
Area Sources (EPA ICR Number 2294.05, OMB Control Number 2060-0623), to 
the Office of Management and Budget (OMB) for review and approval in 
accordance with the Paperwork Reduction Act. This is a proposed 
extension of the ICR, which is currently approved through November 30, 
2018. Public comments were previously requested, via the Federal 
Register, on June 29, 2017 during a 60-day comment period. This notice 
allows for an additional 30 days for public comments. A fuller 
description of the ICR is given below, including its estimated burden 
and cost to the public. An agency may neither conduct nor sponsor, and 
a person is not required to respond to, a collection of information 
unless it displays a currently valid OMB control number.

DATES: Additional comments may be submitted on or before December 31, 
2018.

ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2014-0097 to: (1) EPA online using www.regulations.gov (our 
preferred method), or by email to [email protected], or by mail to: 
EPA Docket Center, Environmental Protection Agency, Mail Code 28221T, 
1200 Pennsylvania Ave. NW, Washington, DC 20460; and (2) OMB via email 
to [email protected]. Address comments to OMB Desk Officer 
for EPA.
    EPA's policy is that all comments received will be included in the 
public docket without change, including any personal information 
provided, unless the comment includes profanity, threats, information 
claimed to be Confidential Business Information (CBI), or other 
information whose disclosure is restricted by statute.

FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, 
Assistance, and Media Programs Division, Office of Compliance, Mail 
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, 
Washington, DC 20460; telephone number: (202) 564-2970; fax number: 
(202) 564-0050; email address: [email protected].

SUPPLEMENTARY INFORMATION: Supporting documents, which explain in 
detail the information that the EPA will be collecting, are available 
in the public docket for this ICR. The docket can be viewed online at 
www.regulations.gov, or in person at the EPA Docket Center, WJC West, 
Room 3334, 1301 Constitution Ave. NW, Washington, DC. The telephone 
number for the Docket Center is 202-566-1744. For additional 
information about EPA's public docket, visit: http://www.epa.gov/dockets.
    Abstract: The National Emission Standards for Hazardous Air 
Pollutants (NESHAP) for Plating and Polishing Area Sources (40 CFR part 
63, subpart WWWWWW) apply to both existing and new plating and 
polishing facilities that are an area source of hazardous air pollutant 
(HAP) emissions and that use one or more of the following metal HAP: 
Cadmium, chromium, lead manganese, or nickel (hereafter referred to as 
the plating and polishing metal HAP). A plating and polishing facility 
is a plant site that is engaged in any of the following processes: Non-
chromium electroplating; electroless or non-electrolytic plating; other 
non-electrolytic metal coating processes such as chromate conversion 
coating, nickel acetate sealing, sodium dichromate sealing, and 
manganese phosphate coating, and thermal spraying; dry mechanical 
polishing of finished metals and formed products after plating or 
thermal spraying; electroforming; and electro-polishing. New facilities 
include those that commenced construction, modification, or 
reconstruction after the date of proposal. In general, all NESHAP 
standards require initial notifications, performance tests, and 
periodic reports by the owners/operators of the affected facilities. 
They are also required to maintain records of the occurrence and 
duration of any startup, shutdown, or malfunction in the operation of 
an affected facility, or any period during which the monitoring system 
is inoperative. These notifications, reports, and records are essential 
in determining compliance with 40 CFR part 63, subpart WWWWWW.
    Form Numbers: None.
    Respondents/affected entities: Plating and polishing area source 
facilities.
    Respondent's obligation to respond: Mandatory (40 CFR part 63, 
subpart WWWWWW).
    Estimated number of respondents: 2,900 (total).
    Frequency of response: Initially and annually.
    Total estimated burden: 67,700 hours (per year). Burden is defined 
at 5 CFR 1320.3(b).
    Total estimated cost: $7,410,000 (per year), which includes no 
annualized capital/startup or operation & maintenance costs.
    Changes in the estimates: There is an increase in the total 
estimated burden and number of responses from the most-recently 
approved ICR due to several adjustments. First, burden hours were added 
to allow each facility to refamiliarize themselves with the regulatory 
requirements each year. Second, the number of sources that complete but 
do not submit annual compliance certifications was left out of the 
response count in the previous renewal and this has been corrected.
    There is a decrease in the annualized capital or operation & 
maintenance costs since the previous renewal due to an adjustment. 
There are no ongoing monitoring requirements in the rule and no new 
sources are expected to incur capital/startup costs. Therefore, the 
capital/startup costs were reduced to zero since those costs have 
already been incurred when the existing sources became subject to the 
rule.

Courtney Kerwin,
Director, Regulatory Support Division.
[FR Doc. 2018-25771 Filed 11-29-18; 8:45 am]
 BILLING CODE 6560-50-P