[Federal Register Volume 83, Number 138 (Wednesday, July 18, 2018)]
[Notices]
[Pages 33946-33947]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-15278]



[[Page 33946]]

-----------------------------------------------------------------------

INTERNATIONAL TRADE COMMISSION

[Investigation Nos. 701-TA-591 and 731-TA-1399 (Final)]


Common Alloy Aluminum Sheet From China; Scheduling of the Final 
Phase of Countervailing Duty and Anti-Dumping Duty Investigations

AGENCY: United States International Trade Commission.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Commission hereby gives notice of the scheduling of the 
final phase of antidumping and countervailing duty investigation Nos. 
701-TA-591 and 731-TA-1399 (Final) pursuant to the Tariff Act of 1930 
(``the Act'') to determine whether an industry in the United States is 
materially injured or threatened with material injury, or the 
establishment of an industry in the United States is materially 
retarded, by reason of imports of common alloy aluminum sheet from 
China, provided for in subheadings 7606.11.30, 7606.11.60, 7606.12.30, 
7606.12.60, 7606.91.30, 7606.91.60, 7606.92.30, and 7606.92.60 of the 
Harmonized Tariff Schedule of the United States, preliminarily 
determined by the Department of Commerce (``Commerce'') to be 
subsidized and sold at less-than-fair-value.

DATES: June 22, 2018.

FOR FURTHER INFORMATION CONTACT: Nathanael N. Comly ((202) 205-3174), 
Office of Investigations, U.S. International Trade Commission, 500 E 
Street SW, Washington, DC 20436. Hearing-impaired persons can obtain 
information on this matter by contacting the Commission's TDD terminal 
on 202-205-1810. Persons with mobility impairments who will need 
special assistance in gaining access to the Commission should contact 
the Office of the Secretary at 202-205-2000. General information 
concerning the Commission may also be obtained by accessing its 
internet server (https://www.usitc.gov). The public record for these 
investigations may be viewed on the Commission's electronic docket 
(EDIS) at https://edis.usitc.gov.

SUPPLEMENTARY INFORMATION: 
    Scope.--For purposes of these investigations, Commerce has defined 
the subject merchandise as aluminum common alloy sheet (common alloy 
sheet), which is a flat rolled aluminum product having a thickness of 
6.3 mm or less, but greater than 0.2 mm, in coils or cut-to-length, 
regardless of width. Common alloy sheet within the scope of this 
investigation includes both not clad aluminum sheet, as well as multi-
alloy, clad aluminum sheet. With respect to not clad aluminum sheet, 
common alloy sheet is manufactured from a 1XXX-, 3XXX-, or 5XXX-series 
alloy as designated by the Aluminum Association. With respect to multi-
alloy, clad aluminum sheet, common alloy sheet is produced from a 3XXX-
series core, to which cladding layers are applied to either one or both 
sides of the core. Common alloy sheet may be made to ASTM specification 
B209-14, but can also be made to other specifications. Regardless of 
specification, however, all common alloy sheet meeting the scope 
description is included in the scope. Subject merchandise includes 
common alloy sheet that has been further processed in a third country, 
including but not limited to annealing, tempering, painting, 
varnishing, trimming, cutting, punching, and/or slitting, or any other 
processing that would not otherwise remove the merchandise from the 
scope of the investigations if performed in the country of manufacture 
of the common alloy sheet. Excluded from the scope of this 
investigation is aluminum can stock, which is suitable for use in the 
manufacture of aluminum beverage cans, lids of such cans, or tabs used 
to open such cans. Aluminum can stock is produced to gauges that range 
from 0.200 mm to 0.292 mm, and has an H- 19, H-41, H-48, or H-391 
temper. In addition, aluminum can stock has a lubricant applied to the 
flat surfaces of the can stock to facilitate its movement through 
machines used in the manufacture of beverage cans.
    Background.--The final phase of these investigations is being 
scheduled pursuant to sections 705(b) and 731(b) of the Tariff Act of 
1930 (19 U.S.C. 1671d(b) and 1673d(b)), as a result of affirmative 
preliminary determinations by the Commerce that certain benefits which 
constitute subsidies within the meaning of section 703 of the Act (19 
U.S.C. 1671b) are being provided to manufacturers, producers, or 
exporters in China of common alloy aluminum sheet, and that such 
products are being sold in the United States at less than fair value 
within the meaning of section 733 of the Act (19 U.S.C. 1673b). The 
investigations were instituted in response to a notification of 
investigations self-initiated by the U.S. Department of Commerce deemed 
by the Commission as having been filed on December 1, 2017.
    For further information concerning the conduct of this phase of the 
investigations, hearing procedures, and rules of general application, 
consult the Commission's Rules of Practice and Procedure, part 201, 
subparts A and B (19 CFR part 201), and part 207, subparts A and C (19 
CFR part 207).
    Participation in the investigations and public service list.--
Persons, including industrial users of the subject merchandise and, if 
the merchandise is sold at the retail level, representative consumer 
organizations, wishing to participate in the final phase of these 
investigations as parties must file an entry of appearance with the 
Secretary to the Commission, as provided in section 201.11 of the 
Commission's rules, no later than 21 days prior to the hearing date 
specified in this notice. A party that filed a notice of appearance 
during the preliminary phase of the investigations need not file an 
additional notice of appearance during this final phase. The Secretary 
will maintain a public service list containing the names and addresses 
of all persons, or their representatives, who are parties to the 
investigations.
    Limited disclosure of business proprietary information (BPI) under 
an administrative protective order (APO) and BPI service list.--
Pursuant to section 207.7(a) of the Commission's rules, the Secretary 
will make BPI gathered in the final phase of these investigations 
available to authorized applicants under the APO issued in the 
investigations, provided that the application is made no later than 21 
days prior to the hearing date specified in this notice. Authorized 
applicants must represent interested parties, as defined by 19 U.S.C. 
1677(9), who are parties to the investigations. A party granted access 
to BPI in the preliminary phase of the investigations need not reapply 
for such access. A separate service list will be maintained by the 
Secretary for those parties authorized to receive BPI under the APO.
    Staff report.--The prehearing staff report in the final phase of 
these investigations will be placed in the nonpublic record on October 
16, 2018, and a public version will be issued thereafter, pursuant to 
section 207.22 of the Commission's rules.
    Hearing.--The Commission will hold a hearing in connection with the 
final phase of these investigations beginning at 9:30 a.m. on Tuesday, 
October 30, 2018, at the U.S. International Trade Commission Building. 
Requests to appear at the hearing should be filed in writing with the 
Secretary to the Commission on or before October 24, 2018. A nonparty 
who has testimony that may aid the Commission's deliberations may 
request permission to present a short statement at the hearing. All 
parties and nonparties desiring to appear at the hearing and make oral

[[Page 33947]]

presentations should participate in a prehearing conference to be held 
on October 29, 2018, at the U.S. International Trade Commission 
Building, if deemed necessary. Oral testimony and written materials to 
be submitted at the public hearing are governed by sections 
201.6(b)(2), 201.13(f), and 207.24 of the Commission's rules. Parties 
must submit any request to present a portion of their hearing testimony 
in camera no later than 7 business days prior to the date of the 
hearing.
    Written submissions.--Each party who is an interested party shall 
submit a prehearing brief to the Commission. Prehearing briefs must 
conform with the provisions of section 207.23 of the Commission's 
rules; the deadline for filing is October 23, 2018. Parties may also 
file written testimony in connection with their presentation at the 
hearing, as provided in section 207.24 of the Commission's rules, and 
posthearing briefs, which must conform with the provisions of section 
207.25 of the Commission's rules. The deadline for filing posthearing 
briefs is November 8, 2018. In addition, any person who has not entered 
an appearance as a party to the investigations may submit a written 
statement of information pertinent to the subject of the 
investigations, including statements of support or opposition to the 
petition, on or before November 8, 2018. On November 28, 2018, the 
Commission will make available to parties all information on which they 
have not had an opportunity to comment. Parties may submit final 
comments on this information on or before November 30, 2018, but such 
final comments must not contain new factual information and must 
otherwise comply with section 207.30 of the Commission's rules. All 
written submissions must conform with the provisions of section 201.8 
of the Commission's rules; any submissions that contain BPI must also 
conform with the requirements of sections 201.6, 207.3, and 207.7 of 
the Commission's rules. The Commission's Handbook on E-Filing, 
available on the Commission's website at https://edis.usitc.gov, 
elaborates upon the Commission's rules with respect to electronic 
filing.
    Additional written submissions to the Commission, including 
requests pursuant to section 201.12 of the Commission's rules, shall 
not be accepted unless good cause is shown for accepting such 
submissions, or unless the submission is pursuant to a specific request 
by a Commissioner or Commission staff.
    In accordance with sections 201.16(c) and 207.3 of the Commission's 
rules, each document filed by a party to the investigations must be 
served on all other parties to the investigations (as identified by 
either the public or BPI service list), and a certificate of service 
must be timely filed. The Secretary will not accept a document for 
filing without a certificate of service.

    Authority:  These investigations are being conducted under 
authority of title VII of the Tariff Act of 1930; this notice is 
published pursuant to section 207.21 of the Commission's rules.

    By order of the Commission.

    Issued: July 12, 2018.
Lisa Barton,
Secretary to the Commission.
[FR Doc. 2018-15278 Filed 7-17-18; 8:45 am]
 BILLING CODE 7020-02-P