[Federal Register Volume 83, Number 54 (Tuesday, March 20, 2018)]
[Notices]
[Pages 12204-12205]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-05557]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF LABOR


Agency Information Collection Activities; Submission for OMB 
Review; Comment Request; Forging Machines

ACTION: Notice of availability; request for comments.

-----------------------------------------------------------------------

SUMMARY: The Department of Labor (DOL) is submitting the Occupational 
Safety and Health Administration (OSHA) sponsored information 
collection request (ICR) titled, ``Forging Machines,'' to the Office of 
Management and Budget (OMB) for review and approval for continued use, 
without change, in accordance with the Paperwork Reduction Act of 1995 
(PRA). Public comments on the ICR are invited.

DATES: The OMB will consider all written comments that agency receives 
on or before April 19, 2018.

ADDRESSES: A copy of this ICR with applicable supporting documentation; 
including a description of the likely respondents, proposed frequency 
of response, and estimated total burden may be obtained free of charge 
from the RegInfo.gov website at http://www.reginfo.gov/public/do/PRAViewICR?ref_nbr=201712-1218-003 (this link will only become active 
on the day following publication of this notice) or by contacting 
Michel Smyth by telephone at 202-693-4129, TTY 202-693-8064, (these are 
not toll-free numbers) or by email at [email protected].
    Submit comments about this request by mail to the Office of 
Information and Regulatory Affairs, Attn: OMB Desk Officer for DOL-
OSHA, Office of Management and Budget, Room 10235, 725 17th Street NW, 
Washington, DC 20503; by Fax: 202-395-5806 (this is not a toll-free 
number); or by email: [email protected]. Commenters are 
encouraged, but not required, to send a courtesy copy of any comments 
by mail or courier to the U.S. Department of Labor--OASAM, Office of 
the Chief Information Officer, Attn: Departmental Information 
Compliance Management Program, Room N1301, 200 Constitution Avenue NW, 
Washington, DC 20210; or by email: [email protected].

FOR FURTHER INFORMATION CONTACT: Michel Smyth by telephone at 202-693-
4129, TTY 202-693-8064, (these are not toll-free numbers) or by email 
at [email protected].

SUPPLEMENTARY INFORMATION: This ICR seeks to extend PRA authority for 
the Forging Machines information collection. Under regulations 29 CFR 
1910.218, it is mandatory for covered employers to conduct and to 
document periodic inspections of forging machines, guards, and point-
of-operation protection devices and to mark manually controlled valves 
and switches. These requirements reduce workers' risks of death or 
serious injury by ensuring that forging machines used by them are in 
safe operating condition and that the workers are able to identify 
manually operated valves and switches. Occupational Safety and Health 
Act of 1970 sections 2, 6, and 8 authorize this information collection. 
See 29 U.S.C. 651, 655, and 657.
    This information collection is subject to the PRA. A Federal agency 
generally cannot conduct or sponsor a collection of information, and 
the public is generally not required to respond to an information 
collection, unless it is approved by the OMB under the PRA and displays 
a currently valid OMB Control Number. In addition, notwithstanding any 
other provisions of law, no person shall generally be subject to 
penalty for failing to comply with a

[[Page 12205]]

collection of information that does not display a valid Control Number. 
See 5 CFR 1320.5(a) and 1320.6. The DOL obtains OMB approval for this 
information collection under Control Number 1218-0228.
    OMB authorization for an ICR cannot be for more than three (3) 
years without renewal, and the current approval for this collection is 
scheduled to expire on March 31, 2018. The DOL seeks to extend PRA 
authorization for this information collection for three (3) more years, 
without any change to existing requirements. The DOL notes that 
existing information collection requirements submitted to the OMB 
receive a month-to-month extension while they undergo review. For 
additional substantive information about this ICR, see the related 
notice published in the Federal Register on October 16, 2017 (82 FR 
48119).
    Interested parties are encouraged to send comments to the OMB, 
Office of Information and Regulatory Affairs at the address shown in 
the ADDRESSES section within thirty (30) days of publication of this 
notice in the Federal Register. In order to help ensure appropriate 
consideration, comments should mention OMB Control Number 1218-0228. 
The OMB is particularly interested in comments that:
     Evaluate whether the proposed collection of information is 
necessary for the proper performance of the functions of the agency, 
including whether the information will have practical utility;
     Evaluate the accuracy of the agency's estimate of the 
burden of the proposed collection of information, including the 
validity of the methodology and assumptions used;
     Enhance the quality, utility, and clarity of the 
information to be collected; and
     Minimize the burden of the collection of information on 
those who are to respond, including through the use of appropriate 
automated, electronic, mechanical, or other technological collection 
techniques or other forms of information technology, e.g., permitting 
electronic submission of responses.
    Agency: DOL-OSHA.
    Title of Collection: Forging Machines.
    OMB Control Number: 1218-0228.
    Affected Public: Private Sector--not for profit institutions.
    Total Estimated Number of Respondents: 27,700.
    Total Estimated Number of Responses: 1,440,400.
    Total Estimated Annual Time Burden: 192,053 hours.
    Total Estimated Annual Other Costs Burden: $0.

    Authority:  44 U.S.C. 3507(a)(1)(D).

    Dated: March 13, 2018.
Michel Smyth,
Departmental Clearance Officer.
[FR Doc. 2018-05557 Filed 3-19-18; 8:45 am]
 BILLING CODE 4510-26-P