[Federal Register Volume 82, Number 170 (Tuesday, September 5, 2017)]
[Notices]
[Pages 41993-41994]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-18678]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2009-0026]


Curtis-Strauss LLC: Grant of Expansion of Recognition

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In this notice, OSHA announces its final decision to expand 
the scope of recognition for Curtis-Strauss LLC as a Nationally 
Recognized Testing Laboratory (NRTL).

DATES: The expansion of the scope of recognition becomes available on 
September 5, 2017.

FOR FURTHER INFORMATION CONTACT: Information regarding this notice is 
available from the following sources:
    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office 
of Communications, U.S. Department of Labor, telephone: (202) 693-1999; 
email: [email protected].
    General and technical information: Contact Mr. Kevin Robinson, 
Director, Office of Technical Programs and Coordination Activities, 
Directorate of Technical Support and Emergency Management, Occupational 
Safety and Health Administration, U.S. Department of Labor, telephone: 
(202) 693-2110; email: [email protected]. OSHA's Web page includes 
information about the NRTL Program (see http://www.osha.gov/dts/otpca/nrtl/index.html).

SUPPLEMENTARY INFORMATION:

I. Notice of Final Decision

    OSHA hereby gives notice of the expansion of the scope of 
recognition of Curtis-Strauss LLC (CSL) as a NRTL. CSL's expansion 
covers the addition of five test standards to its scope of recognition.
    OSHA recognition of a NRTL signifies that the organization meets 
the requirements specified by 29 CFR 1910.7. Recognition is an 
acknowledgment that the organization can perform independent safety 
testing and certification of the specific products covered within its 
scope of recognition and is not a delegation or grant of government 
authority. As a result of recognition, employers may use products 
properly approved by the NRTL to meet OSHA standards that require 
testing and certification of the products.
    The Agency processes applications by a NRTL for initial 
recognition, or for expansion or renewal of this recognition, following 
requirements in Appendix A to 29 CFR 1910.7. This appendix requires 
that the Agency publish two notices in the Federal Register in 
processing an application. In the first notice, OSHA announces the 
application and provides its preliminary finding and, in the second 
notice, the Agency provides its final decision on the application. 
These notices set forth the NRTL's scope of recognition or 
modifications of that scope. OSHA maintains an informational Web page 
for each NRTL that details its scope of recognition. These pages are 
available from the Agency's Web site at: http://www.osha.gov/dts/otpca/nrtl/index.html.
    CSL submitted an application, dated December 30, 2016, (OSHA-2009-
0026-0073) to expand its recognition to include five additional test 
standards. OSHA staff performed a comparability analysis of the 
application packet and reviewed other pertinent information. OSHA did 
not perform any on-site reviews in relation to this application.
    OSHA published the preliminary notice announcing CSL's expansion 
application in the Federal Register on June 21, 2017 (82 FR 28356). The 
Agency requested comments by July 6, 2017, but it received no comments 
in response to this notice. OSHA now is proceeding with this final 
notice to grant expansion of CSL's scope of recognition.
    To obtain or review copies of all public documents pertaining to 
CSL's application, go to: www.regulations.gov or contact the Docket 
Office, Occupational Safety and Health Administration, U.S. Department 
of Labor, 200 Constitution Avenue NW., Room N-2625, Washington, DC 
20210. Docket No. OSHA-2009-0026 contains all materials in the record 
concerning CSL's recognition.

II. Final Decision and Order

    OSHA staff examined CSL's expansion application, its capability to 
meet the requirements of the test standards, and other pertinent 
information. Based on its review of this evidence, OSHA finds that CSL 
meets the requirements of 29 CFR 1910.7 for expansion of its 
recognition, subject to the limitation and conditions listed below. 
OSHA, therefore, is proceeding with this final notice to grant CSL's 
scope of recognition. OSHA limits the expansion of CSL's recognition to 
testing and certification of products for demonstration of conformance 
to the test standards listed in Table 1 below.

 Table 1--List of Appropriate Test Standards for Inclusion in CSL's NRTL
                          Scope of Recognition
------------------------------------------------------------------------
         Test standard                     Test standard title
------------------------------------------------------------------------
UL 197........................  Commercial Electric Cooking Appliances.
UL 763........................  Motor-Operated Commercial Food Preparing
                                 Machines.
UL 982........................  Motor-Operated Household Food Preparing
                                 Machines.
UL 60335-2-3..................  Safety of Household and Similar
                                 Electrical Appliances, Part 2:
                                 Particular Requirements for Electric
                                 Irons.
UL 60335-2-34.................  Safety of Household and Similar
                                 Electrical Appliances, Part 2-34:
                                 Particular Requirements for Motor-
                                 Compressors.
------------------------------------------------------------------------


[[Page 41994]]

    OSHA's recognition of any NRTL for a particular test standard is 
limited to equipment or materials for which OSHA standards require 
third-party testing and certification before using them in the 
workplace. Consequently, if a test standard also covers any products 
for which OSHA does not require such testing and certification, a 
NRTL's scope of recognition does not include these products.
    The American National Standards Institute (ANSI) may approve the 
test standards listed above as American National Standards. However, 
for convenience, we may use the designation of the standards-developing 
organization for the standard as opposed to the ANSI designation. Under 
the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C, 
paragraph XIV), any NRTL recognized for a particular test standard may 
use either the proprietary version of the test standard or the ANSI 
version of that standard. Contact ANSI to determine whether a test 
standard is currently ANSI-approved.

A. Conditions

    In addition to those conditions already required by 29 CFR 1910.7, 
CSL must abide by the following conditions of the recognition:
    1. CSL must inform OSHA as soon as possible, in writing, of any 
change of ownership, facilities, or key personnel, and of any major 
change in its operations as a NRTL, and provide details of the 
change(s);
    2. CSL must meet all the terms of its recognition and comply with 
all OSHA policies pertaining to this recognition; and
    3. CSL must continue to meet the requirements for recognition, 
including all previously published conditions on CSL's scope of 
recognition, in all areas for which it has recognition.
    Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the 
scope of recognition of CSL, subject to the limitation and conditions 
specified above.

III. Authority and Signature

    Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational 
Safety and Health, authorized the preparation of this notice. 
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 
2012), and 29 CFR 1910.7.

    Signed at Washington, DC, on August 25, 2017.
Loren Sweatt,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2017-18678 Filed 9-1-17; 8:45 am]
 BILLING CODE 4510-26-P